PubMed Health⌕ Search

Biomedical subjects

Toshimichi Fujiwara

Publications and source records attributed to Toshimichi Fujiwara.

16 recordsLinked to original sources

Structure of the light-harvesting bacteriochlorophyll c assembly in chlorosomes from Chlorobium limicola determined by solid-state NMR.

We have determined the atomic structure of the bacteriochlorophyll c (BChl c) assembly in a huge light-harvesting organelle, the chlorosome of green photosynthetic bacteria, by solid-state NMR. Previous electron microscopic and spectroscopic studies indicated that chlorosomes have a cylindrical architecture with a diameter of approximately 10 nm consisting of layered BChl molecules. Assembly structures in huge noncrystalline chlorosomes have been proposed based mainly on structure-dependent chemical shifts and a few distances acquired by solid-state NMR, but those studies did not provide a definite structure. Our approach is based on (13)C dipolar spin-diffusion solid-state NMR of uniformly (13)C-labeled chlorosomes under magic-angle spinning. Approximately 90 intermolecular C C distances were obtained by simultaneous assignment of distance correlations and structure optimization preceded by polarization-transfer matrix analysis. It was determined from the approximately 90 intermolecular distances that BChl c molecules form piggyback-dimer-based parallel layers. This finding rules out the well known monomer-based structures. A molecular model of the cylinder in the chlorosome was built by using this structure. It provided insights into the mechanisms of efficient light harvesting and excitation transfer to the reaction centers. This work constitutes an important advance in the structure determination of huge intact systems that cannot be crystallized.

Bacterial Proteins↗

3D structure of amyloid protofilaments of beta2-microglobulin fragment probed by solid-state NMR.

Understanding the structure and formation of amyloid fibrils, the filamentous aggregates of proteins and peptides, is crucial in preventing diseases caused by their deposition and, moreover, for obtaining further insight into the mechanism of protein folding and misfolding. We have combined solid-state NMR, x-ray fiber diffraction, and atomic force microscopy to reveal the 3D structure of amyloid protofilament-like fibrils formed by a 22-residue K3 peptide (Ser(20)-Lys(41)) of beta(2)-microglobulin, a protein responsible for dialysis-related amyloidosis. Although a uniformly (13)C,(15)N-labeled sample was used for the NMR measurements, we could obtain the 3D structure of the fibrils on the basis of a large number of structural constraints. The conformation of K3 fibrils was found to be a beta-strand-loop-beta-strand with each K3 molecule stacked in a parallel and staggered manner. It is suggested that the fibrillar conformation is stabilized by intermolecular interactions, rather than by intramolecular hydrophobic packing as seen in globular proteins. Together with thermodynamic studies of the full-length protein, formation of the fibrils is likely to require side chains on the intermolecular surface to pack tightly against those of adjacent monomers. By revealing the structure of beta(2)-microglobulin protofilament-like fibrils, this work represents technical progress in analyzing amyloid fibrils in general through solid-state NMR.

Amyloid↗

Signal assignment and secondary structure analysis of a uniformly [13C, 15N]-labeled membrane protein, H +-ATP synthase subunit c, by magic-angle spinning solid-state NMR.

Signal assignment and secondary structural analysis of uniformly [13C, 15N] labeled H+-ATP synthase subunit c from E. coli (79 residues) in the solid state were carried out by two- and three-dimensional solid-state NMR under magic-angle spinning. The protein took on a unique structure even in the solid state from the 13C linewidths of about 1.7 ppm. On the basis of several inter- and intra-residue 13C-13C and 13C-15N chemical shift correlations, 78% of Calpha, 72% of Cbeta, 62% of C' and 61% of NH signals were assigned, which provided the secondary structure information for 84% of the 79 residues. Here, inter-residue correlations involving Gly, Ala, Pro and side-chains and a higher resolution in the 3D spectrum were significantly useful for the sequence specific assignment. On top of this, the 13C-13C correlation spectra of subunit c was analyzed by reproducing experimental cross peaks quantitatively with chemical shift prediction and signal-intensity calculation based on the structure. It revealed that the subunit c in the solid state could be specified by alpha-helices with a loop structure in the middle (at sequence 41-45) as in the case of the solution structure in spite of additional extended conformations at 76-79 at the C-terminus.

Amino Acid Sequence↗

Detection of peptide-phospholipid interaction sites in bilayer membranes by 13C NMR spectroscopy: observation of 2H/31P-selective 1H-depolarization under magic-angle spinning.

We have developed a solid-state NMR method for observing the signals due to 13C spins of a peptide in the close vicinity of 31P and 2H spins in deuterated phospholipid bilayers. The signal intensities in 13C high-resolution NMR spectra directly indicate the depolarization of 1H by 1H-31P and 1H-2H dipolar couplings under multiple-contact cross-polarization. This method was applied to a fully 13C-, 15N-labeled 14-residue peptide, mastoparan-X (MP-X), bound to phospholipid bilayers whose fatty acyl chains are deuterated. The 13C NMR spectra for the depolarization were simulated from the chemical shifts and structure of membrane-bound MP-X previously determined and the distribution of 2H and 31P spins in lipid bilayers. The minimization of RMSD between the simulated and the experimental spectra showed that the amphiphilic alpha-helix of MP-X was located in the interface between the water layer and the hydrophobic domain of the bilayer, with nonpolar residues facing the phosphorus atoms and alkyl chains of the lipids.

Carbon Isotopes↗

Assembly of a mixture of isomeric BChl c from Chlorobium limicola as determined by intermolecular 13C-13C dipolar correlations: coexistence of dimer-based and pseudo-monomer-based stackings.

A mixture of bacteriochlorophyll (BChl) c isomers was extracted from the cells of Chlorobium limicola that were grown in the media of 13C-enriched and natural-abundance isotopic compositions. The magic-angle spinning 13C NMR proton-driven spin-diffusion spectra were recorded with mixing times of 50, 100, and 250 ms for two different kinds of in vitro aggregates, one consisting of pure [13C]BChl c and the other consisting of a 1:1 mixture of [13C]BChl c and [12C]BChl c; those peaks whose intensities were reduced to approximately 1/4 by this dilution were assigned to intermolecular 13C-13C dipolar correlation peaks. On the other hand, the nearest-neighbor intermolecular carbon-carbon close contacts with distances of 4-6 A were simulated, to predict observed correlation peaks, for six different models of BChl c assembly. They include weakly overlapped monomers forming structure 1 and structure 2, strongly overlapped dimers forming straight and inclined columns, and weakly overlapped dimers forming aligned and displaced layers. Comparison between the observed correlation peaks and the predicted carbon-carbon close contacts, for both the macrocycles and the side chains, led us to a conclusion that the weakly overlapped dimers forming displaced layers are most likely the assembly of the BChl c molecules in the aggregate.

Bacterial Proteins↗

Structure of tightly membrane-bound mastoparan-X, a G-protein-activating peptide, determined by solid-state NMR.

The structure of mastoparan-X (MP-X), a G-protein activating peptide from wasp venom, in the state tightly bound to anionic phospholipid bilayers was determined by solid-state NMR spectroscopy. Carbon-13 and nitrogen-15 NMR signals of uniformly labeled MP-X were completely assigned by multidimensional intraresidue C-C, N-CalphaCbeta, and N-Calpha-C', and interresidue Calpha-CalphaCbeta, N-CalphaCbeta, and N-C'-Calpha correlation experiments. The backbone torsion angles were predicted from the chemical shifts of 13C', 13Calpha, 13Cbeta, and 15N signals with the aid of protein NMR database programs. In addition, two 13C-13C and three 13C-15N distances between backbone nuclei were precisely measured by rotational resonance and REDOR experiments, respectively. The backbone structure of MP-X was determined from the 26 dihedral angle restraints and five distances with an average root-mean-square deviation of 0.6 A. Peptide MP-X in the bilayer-bound state formed an amphiphilic alpha-helix for residues Trp3-Leu14 and adopted an extended conformation for Asn2. This membrane-bound conformation is discussed in relation to the peptide's activities to form pores in membranes and to activate G-proteins. This study demonstrates the power of multidimensional solid-state NMR of uniformly isotope-labeled molecules and distance measurements for determining the structures of peptides bound to lipid membranes.

GTP-Binding Proteins↗

Effects of thermal treatments on the recovery of adsorbed water and photocatalytic activities of TiO2 photocatalytic systems.

The effects of thermal treatments on the rehydration process and photocatalytic activity were investigated by 1H NMR spectroscopy for six anatase abundant TiO2 photocatalysts with different properties. Acetic acid and benzoic acid were employed for photodecomposition in aqueous suspension. After the calcinations at 973 K, physisorbed water layers recovered relatively fast for P25, F4, and AMT-600 (shorter than 24 h) with no significant enhancement of the photocatalytic decomposition. On the other hand, for ST-01, UV-100, and AMT-100, the recovery was very slow (longer than 1 week) and only partially reversible, and the photocatalytic decomposition was considerably enhanced but retarded with rehydration. In the presence of adsorbed water, the binding of a carboxyl group of the molecules with adsorbed water is considered to compete with the direct adsorption on the surface, which reduces the amount of the direct adsorption and results in the reduction in the photocatalytic efficiency. In addition, the photocatalytic decomposition of benzoic acid with an aromatic ring was much faster in all of the TiO2 aqueous suspensions and more enhanced for the fully dehydroxylated TiO2 than that of acetic acid. These results suggest that the most efficient photocatalytic sites should be the hydrophobic sites on the TiO2 surface. The difference among the rehydration rates of different TiO2 is discussed in terms of thermally induced changes of surface morphology.

Absorption↗

Phospholipid-dependent regulation of cytochrome c3-mediated electron transport across membranes.

Cytochrome c3 (cyt c3) can mediate electron transport across phosphatidylcholine (PC)/cardiolipin (CL) and PC/phosphatidylglycerol (PG) membranes. A two-molecule process is involved in the electron transport across PC/CL membranes in the liquid-crystalline state. In contrast, a single-molecule process dominates the electron transport across PC/CL membranes in the gel state and PC/PG membranes in the liquid-crystalline and gel states. Namely, the electron transport mechanism differs with the phospholipid composition and membrane fluidity. The rate-limiting step of the two-molecule process was lateral diffusion of cyt c3 in membranes. The rate constants for the three single-molecule process cases were similar to each other. To elucidate these reaction processes, interactions between cyt c3 and phosphate groups and between cyt c3 and the glycerol backbones of phospholipid bilayers were investigated by means of 31P and 2H solid-state NMR, respectively, for CL and PC/CL membranes. The results showed that the polar headgroups of both phosphatidylcholine and CL are involved in the binding of cyt c3. Also, cyt c3 penetrates into membranes, which would induce distortion of the lipid bilayer. The molecular mechanisms underlying the single- and two-molecule processes are discussed in terms of membrane structure.

Biological Transport↗

Precision 1H-1H distance measurement via 13C NMR signals: utilization of 1H-1H double-quantum dipolar interactions recoupled under magic angle spinning conditions.

We applied the POST-C7 DQ-dipolar recoupling pulse sequence to the measurement of (1)H-(1)H distances with high precision. The spectral resolution is enhanced by detecting the (1)H magnetization via (13)C signals. A least-squares fitting of the build-up curve of the transferred magnetization to the exact numerical simulations yielded a (1)H(alpha)-(1)H(beta) distance of 248 +/- 4 pm for fully (13)C-labeled L-valine. This distance agrees with the neutron diffraction study. The negative transferred magnetization clearly indicates that the direct DQ (1)H-(1)H dipolar couplings have the largest effect. The signal for the magnetization transfer builds up rapidly by the direct (1)H-(1)H dipolar coupling, and decreases to zero at longer mixing time when the relayed magnetization transfer becomes significant. This large intensity change of the signal leads to the high precision in the distance measurement. We inspected factors that limit the effective bandwidth of the POST-C7 recoupling for the (1)H and (13)C homonuclear spin systems. The spin interactions at times shorter than the cycle time of the C7 sequence were also evaluated to measure the distances. The carbon-detected 2D (1)H DQ mixing experiment was demonstrated for the measurement of multiple (1)H-(1)H distances.

Carbon Isotopes↗

Signal assignments and chemical-shift structural analysis of uniformly 13C, 15N-labeled peptide, mastoparan-X, by multidimensional solid-state NMR under magic-angle spinning.

Carbon-13 and nitrogen-15 signals of fully isotope-labeled 15-residue peptide, glycinated mastoparan-X, in a solid state were assigned by two- and three-dimensional NMR experiments under magic-angle spinning conditions. Intra-residue spin connectivities were obtained with multidimensional correlation experiments for C'-C(alpha)-C(beta) and N-C(alpha)-C(beta). Sequence specific assignments were performed with inter-residue C(alpha)-C(alpha) and N-C(alpha)C(beta) correlation experiments. Pulse sequences for these experiments have mixing periods under recoupled zero- and double-quantum (13)C-(13)C and (15)N-(13)C dipolar interactions. These correlation spectra allowed the complete assignments of (13)C and (15)N backbone and (13)C(beta) signals. Chemical shift analysis of the (13)C and (15)N signals based on empirical and quantum chemical databases for proteins indicated that the backbone between residues 3 and 14 forms alpha-helix and residue 2 has extended conformation in the solid state. This structure was compared with the G-protein- and membrane-bound structures of mastoparan-X.

Carbon Isotopes↗

Phase-modulated heteronuclear decoupling in NMR of solids.

A theoretical description of heteronuclear decoupling in solids, which takes into account homonuclear dipole-dipole interactions and spinning of the sample, is presented. Based on this analysis, a simple and efficient decoupling sequence nPPM is introduced. It consists of n/4 TPPM subcycles, followed by another n/4 subcycles with reversed phases.

Journal Article↗

Band-selective recoupling of homonuclear double-quantum dipolar interaction with a generalized composite 0 degrees pulse: application to 13C aliphatic region-selective magnetization transfer in solids.

Recoupling of homonuclear double quantum (DQ)-dipolar interactions is a useful technique for the structural analysis of molecules in solids. We have designed a series of elemental 0 degrees pulses for the recoupling sequences with the rf phase rotation about the z-axis, known as CN. The proposed 0 degrees pulses whose total flip angle >/=360 degrees provide spin rotation vectors in the xy-plane. Thus, the residual spin rotation can be canceled by rf phase rotation about the z-axis. An analysis by the coherent averaging theory showed that effective bandwidths of the recoupling sequences are limited not by the reduction in the dipolar scaling factor but by the increase in the residual spin rotation due to offset. A CN sequence with these elemental pulses provides an effective bandwidth of DQ-dipolar recoupling from ca. 0.5nu(R) to 4nu(R) for numerical simulations. Here, nu(R) is the sample spinning frequency. The 0 degrees pulses were applied to band-selective recoupling for the magnetization transfer in uniformly 13C-labeled molecules. Narrow-band recoupling enhances the magnetization transfer between spins within the effective range by decoupling the dipolar interactions between spins one of which is outside the range. The narrow band operation reduces rf field strength, which improves the CH decoupling. Increases in signal intensities by the use of the proposed 0 degrees pulses are experimentally shown for 13C-labeled amino acids.

Alanine↗

Redox-coupled conformational alternations in cytochrome c(3) from D. vulgaris Miyazaki F on the basis of its reduced solution structure.

Heteronuclear NMR spectroscopy was performed to determine the solution structure of (15)N-labeled ferrocytochrome c(3) from Desulfovibrio vulgaris Miyazaki F (DvMF). Although the folding of the reduced cytochrome c(3) in solution was similar to that of the oxidized one in the crystal structure, the region involving hemes 1 and 2 was different. The redox-coupled conformational change is consistent with the reported solution structure of D. vulgaris Hildenborough ferrocytochrome c(3), but is different from those of other cytochromes c(3). The former is homologous with DvMF cytochrome c(3) in amino acid sequence. Small displacements of hemes 1 and 2 relative to hemes 3 and 4 were observed. This observation is consistent with the unusual behavior of the 2(1)CH(3) signal of heme 3 reported previously. As shown by the (15)N relaxation parameters of the backbone, a region between hemes 1 and 2 has more flexibility than the other regions. The results of this work strongly suggest that the cooperative reduction of hemes 1 and 2 is based on the conformational changes of the C-13 propionate of heme 1 and the aromatic ring of Tyr43, and the interaction between His34 and His 35 through covalent and coordination bonds.

Amino Acid Sequence↗

Designing analogues of mini atrial natriuretic peptide based on structural analysis by NMR and restrained molecular dynamics.

Analogues of mini atrial natriuretic peptide (miniANP) that provide conformational properties related to biological activity were designed on the basis of the structure revealed by NMR and restrained molecular dynamics (rMD) simulation, and an analogue with a high level of biological activity was successfully obtained. MiniANP is a cyclic pentadecapeptide analogue of atrial natriuretic polypeptide (ANP). The conformation of miniANP analyzed by NMR and rMD simulation indicated that positive phi angles are preferred for Gly(5) and Gly(6), which is typical for D-amino acids. On the basis of the structural information, [D-Ala(5)]miniANP, [D-Ala(6)]miniANP, and [D-Ala(5) D-Ala(6)]miniANP were synthesized. The biological activity of [D-Ala(5)]miniANP was stronger than that of miniANP, confirming that Gly(5) of miniANP takes a positive phi angle on binding to the receptor. Conformational analysis of these analogue peptides by NMR suggested that a turnlike conformation at residues 6-9 and a proximate pair formed by side chains of Phe(4) and Ile(11) are important for the biological activity.

Amino Acid Sequence↗

Synthesis of a membrane protein with two transmembrane regions.

A membrane protein with two transmembrane domains was synthesized by means of the thioester method. The F1F0 ATP synthase subunit c (Sub.c), which consists of 79 amino acid residues (MW 8257), was chosen as a target. For synthetic purposes, two building blocks, Boc-[Lys34(Boc)]-Sub.c(1-38)-SCH2CH2CO-Ala and Sub.c(39-79), were synthesized via solid-phase methods using Boc chemistry. RP-HPLC purification conditions for the transmembrane peptide were examined. As a result, a combination of a mixture of formic acid, 1-propanol and water with a phenyl column was found to be useful for separating the transmembrane peptide. The purified building blocks were condensed in DMSO in the presence of silver chloride, 3,4-dihydro-3-hydroxy-4-oxo-1,2,3-benzotriazine (HOOBt), N,N-diisopropylethylamine to give the product, Sub.c, after removal of Boc groups (yield 16%). The yield of the condensation reaction could be improved to 23% by raising the reaction temperature to 50 degrees C, and to 26% when a mixture of chloroform and methanol was used as a solvent.

Amino Acid Sequence↗