Biomedical subjects

Toshio Shinbo

Publications and source records attributed to Toshio Shinbo.

13 recordsLinked to original sources

PubMed2006

Manipulation of living cells by using PC-controlled micro-pattern projection system.

In order to meet the diversifying demand for the cell manipulation in the rapid progress of cell engineering, we developed a novel technique to capture the living cells on a culture substrate by irradiating light in a multiple manner. In clear contrast to the conventional cell patterning using the previously patterned substrate, the cell-retaining area can be defined even after cell seeding, and the captured cells can continue to grow freely beyond the defined area afterwards. After the light irradiation in arbitrary micropattern by using a newly developed apparatus and the process to remove non-captured cells including EDTA treatment, the highly contrasted cell patterns were formed with the precision of single cell size. Moreover, it was determined that the cell capturing arose just after light irradiation and diminished gradually in a time scale of 10h. It was confirmed that the cells maintained their viability well after the manipulation process including photo-induced cell capturing.

Animals↗

PubMed2006

DNA detection system using molecularly imprinted polymer as the gel matrix in electrophoresis.

To develop a simple and inexpensive method for DNA detection, we prepared a molecularly imprinted polymer (MIP) for recognizing a specific double-stranded DNA (dsDNA) sequence and used it in an electrophoretic gel matrix. The MIP gel has many binding sites that are complementary in size, shape, and arrangement of functional groups of the target dsDNA sequence. During MIP gel electrophoresis (MIPGE), migration of the target dsDNA should be hindered by the capture effect of the binding sites in the MIP gel. This was confirmed by observation of deviations from the linear relationship between the migration distances of the DNA standard size markers in the polyacrylamide gel and those in the MIP gel. The migration distances of nontarget dsDNA maintained a linear relationship, however. In addition, the sequence selectivity of dsDNA in this method was investigated by using the Ha-ras gene and its point mutants. Except for A.T to T.A base pair substitution, mutant dsDNA (for example, substitution from A.T to C.G and from G.C to T.A) could be distinguished from the target (wild-type) dsDNA. Although some improvement in A.T (T.A) base pair distinction is still needed, this study is the first to demonstrate detection of a specific dsDNA sequence with MIPs and, as such, opens up a new realm for practical applications of MIPs.

DNA↗

PubMed2006

Photoresponse of an aqueous two-phase system composed of photochromic dextran.

A novel aqueous two-phase system, which exhibits a reversible photoinduced phase separation, has been developed with photochromic dextran synthesized by substituting 0.3 mol % of the hydroxyl groups with the photochromic chromophore, 6-nitrospiropyran (NSp). For an aqueous solution containing this photochromic dextran and poly(ethylene glycol), it was observed that the solution, which had been uniform in the dark, quickly separated into two phases through blue light irradiation within 1 min and returned to the former uniform state spontaneously after heating at 50 degrees C for 1 h. Photoisomerization of NSp was confirmed to shift the phase separation temperature of this aqueous two-phase system by up to 30 degrees C.

Benzopyrans↗

PubMed2006

Photoresponsive properties of poly(N-isopropylacrylamide) hydrogel partly modified with spirobenzopyran.

A photoresponsive hydrogel was prepared by radical copolymerization of N-isopropylacrylamide, a vinyl monomer having a spirobenzopyran residue and cross-linker. By the observation of photoresponsive shrinking and the conductance change, it was confirmed that the hydrogel in an acidic condition exhibited drastic and rapid volume shrinkage and proton dissociation when it was irradiated with blue light. Further, to examine its application to the mass transfer control, we prepared a photo- and thermoresponsive gate membrane by introducing this photoresponsive hydrogel to the surface of a porous membrane. As the first demonstration of the photocontrol of membrane permeation for liquid, it was observed that its permeability for 1 mM HCl aqueous solution increased by 2 times in response to the blue light irradiation, and this photoresponse of the permeability was confirmed to be repeatable.

Journal Article↗

PubMed2006

Detection of a specific DNA sequence by electrophoresis through a molecularly imprinted polymer.

To develop a simple and inexpensive DNA detection method, we prepared a molecularly imprinted polymer (MIP) gel for recognizing a specific double-stranded DNA (dsDNA) target sequence in MIP gel electrophoresis (MIPGE). During MIPGE, migration of the target sequence of dsDNA should be hindered by the capture effect of the binding sites in the MIP gel. This migration hindrance of target dsDNA was determined by plotting the relationship between the migration distance in the MIP gel and that in polyacrylamide gel, commonly used in gel electrophoresis. Using this plot, detection of a target dsDNA from a mixture of different-sized dsDNA fragments was achieved. Moreover, we found the detection method successfully distinguished between a target and its base-pair substitutes. These results suggest that MIPGE could be employed for detection of a target dsDNA sequence.

Base Sequence↗

PubMed2006

Construction of a new artificial biomineralization system.

Hydroxyapatite (HAP) was mineralized in poly(vinyl alcohol) (PVA)/poly(acrylic acid) (PAA) complex hydrogel immersed in a salt solution containing PAA. The transparent HAP/polymer composite swelled in water depending on the HAP content; high HAP content gave small swelling and vice versa. The HAP content reached about 80 wt % at most. Observation of the cross section of the composite by energy-dispersive analysis of X-ray (EDAX) revealed that the composite consisted of two phases, i.e., a hard HAP-rich phase and a soft polymer-rich phase. In the HAP-rich phase, the space inside the hydrogel was occupied by HAP, while HAP was not mineralized in the polymer-rich phase. The nucleation seemed to take place, at first, at the middle depth of the hydrogel where the HAP-rich phase was formed. The HAP-rich phase grew its size toward the surface of the hydrogel at the cost of the polymer-rich phase. The presence of phosphorus, P, in the polymer-rich phase indicated the adsorption of HPO(4)(2-) on the polymer chain of the hydrogel via hydrogen bonding, accompanied with Ca(2+) because of electrostatic constraints. This adsorption of ions in addition to Donnan distribution of ions leads to the formation of a hypercomplex that can be regarded as a precursor of the HAP-rich phase. The change of the hypercomplex into the HAP-rich phase is discontinuous and hence concluded as a phase transition. By comparison of our mineralization system with the biomineralization system of HAP and CaCO(3), the physicochemical mechanism of the mineralization process in the present system was found to be similar to that in biological systems. In this sense, we termed the present system an artificial biomineralization system.

Acrylic Resins↗

PubMed2005

Detection of polychlorinated biphenyls using an antibody column in tandem with a fluorescent liposome column. Effect of albumin on phospholipase A2-catalyzed membrane leakage.

Phospholipase A2 (PLA2)-catalyzed membrane leakage can be detected by immobilized liposomes containing a self-quenching fluorescent dye, 3,3-bis[N,N-di(carboxymethyl)aminomethyl]fluorescein (calcein). This enzymatic reaction was applied as signal amplification for biosensor detection of low concentrations of polychlorinated biphenyls (PCBs). In order to increase the fluorescent signal for improvement of PCBs detection, the effect of BSA on optimal lipid composition for PLA2-catalyzed membrane leakage from fluorescent liposomes has been investigated in this report. Various kinds of calcein-entrapped liposomes were immobilized in Sephacryl S1000 gel beads using avidin-biotin binding. In a contrast, free calcein was removed by size exclusion chromatography on Sephacryl S300 for free liposome suspensions. The PLA2-catalyzed membrane leakage was detected both in these gel-bead-immobilized liposomes and in free liposome suspensions. In both systems, the fluorescent release from the liposomes by PLA2 hydrolytic action significantly increased with increasing albumin concentration. The most rapid and greatest membrane leakage by PLA2 hydrolysis was found in anionic liposomes in the presence of albumin, both in free liposome suspensions and gel-bead-immobilized liposomes. Finally, the stabilities of various free liposomes and gel-bead-immobilized liposomes were monitored. Immobilized 1-palmitoy-2-oleoylphosphatidylcholine (POPC)/1-palmitoy-2-oleoylphosphatidylglycerol (POPG) liposome gel was chosen due to its excellent stability and large dye leakage by PLA2. A concentration of PCBs as low as 0.1 ng/mL was detectable using this tandem column system.

Albumins↗

PubMed2005

Poly(N-isopropylacrylamide)-graft-polypropylene membranes containing adsorbed antibody for cell separation.

We developed a novel selective cell-separation method based on using a poly(N-isopropylacrylamide)-graft-polypropylene (PNIPAAm-g-PP) membrane containing adsorbed monoclonal antibody specific to the target cell. This membrane was prepared by plasma-induced polymerization and soaking in an antibody solution at 37 degrees C. Poly(N-isopropylacrylamide) has a thermoresponsive phase transition: at 32 degrees C water-insoluble (hydrophobic) and water-soluble (hydrophilic) states interconvert. Adsorption of antibody onto PNIPAAm-g-PP membrane at 37 degrees C and its desorption at 4 degrees C was verified by fluorescence-microscopy of the PNIPAAm-g-PP membrane after soaking it in fluorescein-conjugated goat anti-mouse IgG in phosphate-buffered saline. PNIPAAm-g-PP membranes containing adsorbed anti-mouse CD80 monoclonal antibody preferentially captured mouse-CD80 transfected cells at 37 degrees C compared with membranes lacking antibody or containing anti-mouse CD86 monoclonal antibody. Detachment of captured cells from PNIPAAm-g-PP membranes was facilitated by washing at 4 degrees C because of the thermoresponsive phase transition of PNIPAAm. With this method, mouse CD80- or mouse CD86-transfected cells were enriched from a 1:1 cell suspension to 72% or 66%, simply and with high yield.

Acrylic Resins↗

PubMed2004

Probing the dielectric environment surrounding poly(N-isopropylacrylamide) in aqueous solution with covalently attached spirobenzopyran.

The dielectric environment surrounding poly(N-isopropylacrylamide) in aqueous solution was investigated by probing with spirobenzopyran covalently attached as a side chain to the polymer main chain. Inherent characteristics of the spirobenzopyran chromophore were analyzed, and the chromophore was confirmed to be suitable to probe the local polar condition around the polymer. Measurements for an aqueous polymer solution at various temperatures elucidated that the dielectric environment surrounding the polymer changed continuously even in the temperature range far below the lower critical solution temperature. This result suggested that the local and weak orientation of water molecules around the polymer diminished continuously in a preliminary stage of shifting to thermally induced phase separation. The dielectric environment surrounding thermoresponsive polymer in aqueous solution was investigated by probing with spirobenzopyran covalently attached as a side chain to the polymer main chain.

Acrylic Resins↗

PubMed2004

Surface modification of poly(L: -lactic acid) affects initial cell attachment, cell morphology, and cell growth.

The object of this study was to develop a highly porous scaffold to be used in regeneration of blood vessels, nerves, and other hollow tissues with small openings. Using the phase-inversion method and a mixture of water and methanol as a coagulating agent, we prepared highly porous flat membranes from poly(L: -lactic acid) (PLLA) with numerous pores both on the surface and in the interior of the membranes. Chinese hamster ovary (CHO) cells were cultured on the membranes to evaluate initial cell adhesion, cell proliferation, and cell morphology. Adhesion of CHO cells to PLLA was poor: the cells adhered at approximately half the rate observed with a tissue culture polystyrene dish (TCPS). In contrast, adhesion of cells to PLLA treated with a low-temperature oxygen plasma was good; the adhesion rate was the same as that on TCPS. The rate of cell proliferation on the treated membranes was no different from that on the nontreated membranes, but cell morphologies were quite different. The cells on the nontreated membranes were small and round and proliferated separately from one another. In contrast, the cells on the plasma-treated membranes proliferated in close contact with other cells, spreading out extensively in sheet-like formations. Since the plasma treatment not only accelerated cell adhesion but also enabled cells to proliferate in the form of sheets resembling biological tissue, we believe that oxygen-plasma treatment is extremely effective for modifying surfaces of materials used for tissue regeneration.

Animals↗

PubMed2004

Development of a novel polyimide hollow-fiber oxygenator.

We have developed a membrane oxygenator using a novel asymmetric polyimide hollow fiber. The hollow fibers are prepared using a dry/wet phase-inversion process. The gas transfer rates of O(2) and CO(2) through the hollow fibers are investigated in gas-gas and gas-liquid systems. The polyimide hollow fiber has an asymmetric structure characterized by the presence of macrovoids, and the outer diameter of the hollow fiber is 330 microm. It is found that the polyimide hollow-fiber oxygenator can enhance the gas transfer rates of O(2) and CO(2), and that the hollow fiber provides excellent blood compatibility in vitro and in vivo.

Animals↗

PubMed2002

Development of a molecular recognition ion gating membrane and estimation of its pore size control.

We have fabricated a molecular recognition ion gating membrane. This synthetic membrane spontaneously opens and closes its pores in response to specific solvated ions. In addition to this switching function, we found that this membrane could control its pore size in response to a known concentration of a specific ion. The membrane was prepared by plasma graft copolymerization, which filled the pores of porous polyethylene film with a copolymer of NIPAM (N-isopropylacrylamide) and BCAm (benzo[18]crown-6-acrylamide). NIPAM is well-known to have an LCST (lower critical solution temperature), at which its volume changes dramatically in water. The crown receptor of the BCAm traps a specific ion, and causes a shift in the LCST. Therefore, selectively responding to either K(+) or Ba(2+), the grafted copolymer swelled and shrank in the pores at a constant temperature between two LCSTs. The solution flux in the absence of Ba(2+) decreased by about 2 orders of magnitude over a solution flux containing Ba(2+). The pore size was estimated by the filtration of aqueous dextran solutions with various solute sizes. This revealed that the membrane changed its pore size between 5 and 27 nm in response to the Ba(2+) concentration changes. No such change was observed for Ca(2+) solutions. Furthermore, this pore size change occurred uniformly in all pores, as a clear cut-off value for a solute size that could pass through pores was always present. This membrane may be useful not only as a molecular recognition ion gate, but also as a device for spontaneously controlling the permeation flux and solute size.

Acrylamides↗

PubMedDate not supplied

In situ control of cell adhesion using photoresponsive culture surface.

A photoresponsive culture surface (PRCS) allowing photocontrol of cell adhesion was prepared with a novel polymer material composed of poly(N-isopropylacrylamide) having spiropyran chromophores as side chains. Cell adhesion of the surface was drastically enhanced by the irradiation with ultraviolet (UV) light (wavelength: 365 nm); after subsequent cooling and washing on ice, many cells remained in the irradiated region, whereas most cells were removed from the nonirradiated region. The cell adhesion of the PRCS, which had been enhanced by previous UV irradiation, was reset by the visible light irradiation (wavelength 400-440 nm) and the annealing at 37 degrees C for 2 h. Also it was confirmed that the regional control of cell adhesion was induced several times by repeating the same series of operations. Further, living cell patterning with the 200 microm line width was produced readily by projecting UV light along a micropattern on the PRCS on which the living cells had been seeded uniformly in advance. By using a fluorescent probe that stains living cells only, it was confirmed that the cells maintained sufficient viability even after UV light irradiation followed by cooling and washing.

Acrylic Resins↗