PubMed Health⌕ Search

Biomedical subjects

Trisha N Davis

Publications and source records attributed to Trisha N Davis.

17 recordsLinked to original sources
PubMed2006

Mps1 phosphorylation of Dam1 couples kinetochores to microtubule plus ends at metaphase.

BACKGROUND: Duplicated chromosomes are equally segregated to daughter cells by a bipolar mitotic spindle during cell division. By metaphase, sister chromatids are coupled to microtubule (MT) plus ends from opposite poles of the bipolar spindle via kinetochores. Here we describe a phosphorylation event that promotes the coupling of kinetochores to microtubule plus ends. RESULTS: Dam1 is a kinetochore component that directly binds to microtubules. We identified DAM1-765, a dominant allele of DAM1, in a genetic screen for mutations that increase stress on the spindle pole body (SPB) in Saccharomyces cerevisiae. DAM1-765 contains the single mutation S221F. We show that S221 is one of six Dam1 serines (S13, S49, S217, S218, S221, and S232) phosphorylated by Mps1 in vitro. In cells with single mutations S221F, S218A, or S221A, kinetochores in the metaphase spindle form tight clusters that are closer to the SPBs than in a wild-type cell. Five lines of experimental evidence, including localization of spindle components by fluorescence microscopy, measurement of microtubule dynamics by fluorescence redistribution after photobleaching, and reconstructions of three-dimensional structure by electron tomography, combined with computational modeling of microtubule behavior strongly indicate that, unlike wild-type kinetochores, Dam1-765 kinetochores do not colocalize with an equal number of plus ends. Despite the uncoupling of the kinetochores from the plus ends of MTs, the DAM1-765 cells are viable, complete the cell cycle with the same kinetics as wild-type cells, and biorient their chromosomes as efficiently as wild-type cells. CONCLUSIONS: We conclude that phosphorylation of Dam1 residues S218 and S221 by Mps1 is required for efficient coupling of kinetochores to MT plus ends. We find that efficient plus-end coupling is not required for (1) maintenance of chromosome biorientation, (2) maintenance of tension between sister kinetochores, or (3) chromosome segregation.

Cell Cycle Proteins↗
PubMed2006

The Dam1 kinetochore complex harnesses microtubule dynamics to produce force and movement.

Kinetochores remain attached to microtubule (MT) tips during mitosis even as the tips assemble and disassemble under their grip, allowing filament dynamics to produce force and move chromosomes. The specific proteins that mediate tip attachment are uncertain, and the mechanism of MT-dependent force production is unknown. Recent work suggests that the Dam1 complex, an essential component of kinetochores in yeast, may contribute directly to kinetochore-MT attachment and force production, perhaps by forming a sliding ring encircling the MT. To test these hypotheses, we developed an in vitro motility assay where beads coated with pure recombinant Dam1 complex were bound to the tips of individual dynamic MTs. The Dam1-coated beads remained tip-bound and underwent assembly- and disassembly-driven movement over approximately 3 microm, comparable to chromosome displacements in vivo. Dam1-based attachments to assembling tips were robust, supporting 0.5-3 pN of tension applied with a feedback-controlled optical trap as the MTs lengthened approximately 1 microm. The attachments also harnessed energy from MT disassembly to generate movement against tension. Reversing the direction of force (i.e., switching to compressive force) caused the attachments to disengage the tip and slide over the filament, but sliding was blocked by areas where the MT was anchored to a coverslip, consistent with a coupling structure encircling the filament. Our findings demonstrate how the Dam1 complex may contribute directly to MT-driven chromosome movement.

Chromosome Segregation↗
PubMed2005

Phosphorylation of the chromosomal passenger protein Bir1 is required for localization of Ndc10 to the spindle during anaphase and full spindle elongation.

The Saccharomyces cerevisiae inhibitor of apoptosis (IAP) repeat protein Bir1 localizes as a chromosomal passenger. A deletion analysis of Bir1 identified two regions important for function. The C-terminal region is essential for growth, binds Sli15, and is necessary and sufficient for the localization of Bir1 as a chromosomal passenger. The middle region is not essential but is required to localize the inner kinetochore protein Ndc10 to the spindle during anaphase and to the midzone at telophase. In contrast, precise deletion of the highly conserved IAP repeats conferred no phenotype and did not alter the cell cycle delay caused by loss of cohesin. Bir1 is phosphorylated in a cell cycle-dependent manner. Mutation of all nine CDK consensus sites in the middle region of Bir1 significantly decreased the level of phosphorylation and blocked localization of Ndc10 to the spindle at anaphase. Moreover, immunoprecipitation of Ndc10 with Bir1 was dependent on phosphorylation. The loss of Ndc10 from the anaphase spindle prevented elongation of the spindle beyond 7 microm. We conclude that phosphorylation of the middle region of Bir1 is required to bring Ndc10 to the spindle at anaphase, which is required for full spindle elongation.

Anaphase↗
PubMed2005

A high-efficiency method to replace essential genes with mutant alleles in yeast.

Temperature-sensitive (TS), internally deleted and truncated alleles are important tools to facilitate the characterization of essential genes. We have developed a straightforward method to replace a wild-type gene with a mutant allele at the endogenous locus. This method is an efficient alternative to the two-step method for integration of alleles that are compromised in function or contain multiple mutations. A strain is constructed that has the essential gene of interest disrupted by a selectable marker. Strain viability is maintained by a plasmid carrying a copy of the essential wild-type gene and the ADE3 gene. The mutant allele is cloned into an integratable vector carrying a selectable/counter-selectable marker, such as URA3. The plasmid is linearized and transformed, directing integration to the 5' or 3' region flanking the essential open reading frame (ORF). Transformants that have integrated the mutant gene at the endogenous locus can lose the autonomous plasmid carrying the wild-type copy of the essential gene and the ADE3 gene. These transformants are identifiable as white sectoring colonies, display the mutant phenotype and may be characterized. An optional second selection step on 5-fluoroorotic acid (5-FOA) selects for popouts of the integrating vector sequences, leaves the mutant allele at the endogenous locus, and recycles selectable markers. We have used this method to integrate a TS allele of SPC110 that could not be integrated by standard methods.

Alleles↗
PubMed2005

The organization of the core proteins of the yeast spindle pole body.

The spindle pole body (SPB) is the microtubule organizing center of Saccharomyces cerevisiae. Its core includes the proteins Spc42, Spc110 (kendrin/pericentrin ortholog), calmodulin (Cmd1), Spc29, and Cnm67. Each was tagged with CFP and YFP and their proximity to each other was determined by fluorescence resonance energy transfer (FRET). FRET was measured by a new metric that accurately reflected the relative extent of energy transfer. The FRET values established the topology of the core proteins within the architecture of SPB. The N-termini of Spc42 and Spc29, and the C-termini of all the core proteins face the gap between the IL2 layer and the central plaque. Spc110 traverses the central plaque and Cnm67 spans the IL2 layer. Spc42 is a central component of the central plaque where its N-terminus is closely associated with the C-termini of Spc29, Cmd1, and Spc110. When the donor-acceptor pairs were ordered into five broad categories of increasing FRET, the ranking of the pairs specified a unique geometry for the positions of the core proteins, as shown by a mathematical proof. The geometry was integrated with prior cryoelectron tomography to create a model of the interwoven network of proteins within the central plaque. One prediction of the model, the dimerization of the calmodulin-binding domains of Spc110, was confirmed by in vitro analysis.

Calmodulin↗
PubMed2005

The Yeast Resource Center Public Data Repository.

The Yeast Resource Center Public Data Repository (YRC PDR) serves as a single point of access for the experimental data produced from many collaborations typically studying Saccharomyces cerevisiae (baker's yeast). The experimental data include large amounts of mass spectrometry results from protein co-purification experiments, yeast two-hybrid interaction experiments, fluorescence microscopy images and protein structure predictions. All of the data are accessible via searching by gene or protein name, and are available on the Web at http://www.yeastrc.org/pdr/.

Databases, Protein↗
PubMed2004

Analysis of a spindle pole body mutant reveals a defect in biorientation and illuminates spindle forces.

The spindle pole body (SPB) is the microtubule organizing center in Saccharomyces cerevisiae. An essential task of the SPB is to ensure assembly of the bipolar spindle, which requires a proper balancing of forces on the microtubules and chromosomes. The SPB component Spc110p connects the ends of the spindle microtubules to the core of the SPB. We previously reported the isolation of a mutant allele spc110-226 that causes broken spindles and SPB disintegration 30 min after spindle formation. By live cell imaging of mutant cells with green fluorescent protein (GFP)-Tub1p or Spc97p-GFP, we show that spc110-226 mutant cells have early defects in spindle assembly. Short spindles form but do not advance to the 1.5-microm stage and frequently collapse. Kinetochores are not arranged properly in the mutant cells. In 70% of the cells, no stable biorientation occurs and all kinetochores are associated with only one SPB. Examination of the SPB remnants by electron microscopy tomography and fluorescence microscopy revealed that the Spc110-226p/calmodulin complex is stripped off of the central plaque of the SPB and coalesces to from a nucleating structure in the nucleoplasm. The central plaque components Spc42p and Spc29p remain behind in the nuclear envelope. The delamination is likely due to a perturbed interaction between Spc42p and Spc110-226p as detected by fluorescence resonance energy transfer analysis. We suggest that the force exerted on the SPB by biorientation of the chromosomes pulls the Spc110-226p out of the SPB; removal of force exerted by coherence of the sister chromatids reduced fragmentation fourfold. Removal of the forces exerted by the cytoplasmic microtubules had no effect on fragmentation. Our results provide insights into the relative contributions of the kinetochore and cytoplasmic microtubules to the forces involved in formation of a bipolar spindle.

Alleles↗
PubMed2004

Localization of proteins that are coordinately expressed with Cln2 during the cell cycle.

The localization of proteins can give important clues about their function and help sort data from large-scale proteomic screens. Forty-five proteins were tagged with the GFP variant YFP. These proteins were chosen because they are encoded by genes that display strong cell cycle-dependent expression that peaks in G(1). Most of these proteins localize to either the nucleus or to sites of cell growth. We are able to assign new cellular component GO terms to ASF2, TOS4, RTT109, YBR070C, YKR090W, YOL007C, YOL019W and YPR174C. We also have localization data for 21 other proteins. Noteworthy localizations were found for Rfa1p, a member of the DNA replication A complex, and Pri2p and Pol12p, subunits of the alpha-DNA polymerase : primase complex. In addition to its nuclear localization, Rfa1p assembled into cytoplasmic foci adjacent to the nucleus in cells during the G(1)-S phase transition of the cell cycle. Pri2 and Pol12 took on a beaded appearance at the G(1)-S transition and later in the cell cycle were enriched in the nuclear envelope. A new spindle pole body/nuclear envelope component encoded by YPR174 was identified. The cell cycle-dependent abundance of Tos4p mirrored Yox1p and these two proteins were the only proteins that were found exclusively at the G(1)-S phase of the cell cycle. A complete list of localizations, along with images, can be found at our website (http://www.yeastrc.org/cln2/).

Cell Cycle↗
PubMed2004

Protein localization in proteomics.

A global analysis of the localization of 4156 yeast proteins has just been accomplished. Smaller scale analyses have been performed in a variety of organisms. These studies typically use green fluorescent protein as a tag for proteins in living cells. Improvements in the yellow and sapphire color variants will increase their utility. Reengineering of the red fluorescent protein has produced faster maturing tetrameric and monomeric variants not prone to aggregation. Techniques for high-throughput tagging of proteins include integration by homologous recombination, integration using mobile elements or recombinational cloning to produce plasmids expressing fusion proteins. Alternatives to localizing tagged proteins are to use antibodies or aptamers to detect the untagged protein.

Animals↗
PubMed2003

The Saccharomyces cerevisiae spindle pole body is a dynamic structure.

During spindle pole body (SPB) duplication, the new SPB is assembled at a distinct site adjacent to the old SPB. Using quantitative fluorescence methods, we studied the assembly and dynamics of the core structural SPB component Spc110p. The SPB core exhibits both exchange and growth in a cell cycle-dependent manner. During G1/S phase, the old SPB exchanges approximately 50% of old Spc110p for new Spc110p. In G2 little Spc110p is exchangeable. Thus, Spc110p is dynamic during G1/S and becomes stable during G2. The SPB incorporates additional Spc110p in late G2 and M phases; this growth is followed by reduction in the next G1. Spc110p addition to the SPBs (growth) also occurs in response to G2 and mitotic arrests but not during a G1 arrest. Our results reveal several dynamic features of the SPB core: cell cycle-dependent growth and reduction, growth in response to cell cycle arrests, and exchange of Spc110p during SPB duplication. Moreover, rather than being considered a conservative or dispersive process, the assembly of Spc110p into the SPB is more readily considered in terms of growth and exchange.

Calmodulin-Binding Proteins↗
PubMed2003

The centrosomal proteins pericentrin and kendrin are encoded by alternatively spliced products of one gene.

Pericentrin, a critical centrosome component first identified in mouse, recruits factors required for assembly of the mitotic spindle apparatus. A similar yet larger human protein named kendrin was recently identified, but its relationship to pericentrin was not clear. Extensive sequence homology between the mouse chromosome 10 region encoding pericentrin and the human chromosome 21 region encoding kendrin indicates that these proteins are encoded by syntenic loci. However, comparison of the published mouse pericentrin cDNA sequence to mouse genomic DNA sequences revealed two important differences: the stop codon present in the published mouse pericentrin cDNA is not found in the mouse genomic sequence, and the 3' end of the published mouse pericentrin cDNA is a fragment from a different mouse chromosome. To resolve these discrepancies, we sequenced a mouse expressed sequence tag (EST) that corresponds to the 3' end for a 7.1-kb mouse pericentrin RNA encoded on chromosome 10. Extensive northern blot analysis revealed that the pericentrin gene displays a complex expression pattern in both mouse and human: a 10-kb kendrin transcript is found in most tissues, whereas smaller transcripts are detected in a limited subset of tissues. These analyses demonstrate that pericentrin and kendrin are encoded by one gene, correct the previously published pericentrin cDNA sequence, and describe the complex expression pattern for a gene important for centrosome function in normal and transformed cells.

Alternative Splicing↗
PubMed2003

Assigning function to yeast proteins by integration of technologies.

Interpreting genome sequences requires the functional analysis of thousands of predicted proteins, many of which are uncharacterized and without obvious homologs. To assess whether the roles of large sets of uncharacterized genes can be assigned by targeted application of a suite of technologies, we used four complementary protein-based methods to analyze a set of 100 uncharacterized but essential open reading frames (ORFs) of the yeast Saccharomyces cerevisiae. These proteins were subjected to affinity purification and mass spectrometry analysis to identify copurifying proteins, two-hybrid analysis to identify interacting proteins, fluorescence microscopy to localize the proteins, and structure prediction methodology to predict structural domains or identify remote homologies. Integration of the data assigned function to 48 ORFs using at least two of the Gene Ontology (GO) categories of biological process, molecular function, and cellular component; 77 ORFs were annotated by at least one method. This combination of technologies, coupled with annotation using GO, is a powerful approach to classifying genes.

Computational Biology↗
PubMed2003

Chl4p and iml3p are two new members of the budding yeast outer kinetochore.

Kinetochore proteins contribute to the fidelity of chromosome transmission by mediating the attachment of a specialized chromosomal region, the centromere, to the mitotic spindle during mitosis. In budding yeast, a subset of kinetochore proteins, referred to as the outer kinetochore, provides a link between centromere DNA-binding proteins of the inner kinetochore and microtubule-binding proteins. Using a combination of chromatin immunoprecipitation, in vivo localization, and protein coimmunoprecipitation, we have established that yeast Chl4p and Iml3p are outer kinetochore proteins that localize to the kinetochore in a Ctf19p-dependent manner. Chl4p interacts with the outer kinetochore proteins Ctf19p and Ctf3p, and Iml3p interacts with Chl4p and Ctf19p. In addition, Chl4p is required for the Ctf19p-Ctf3p and Ctf19p-Iml3p interactions, indicating that Chl4p is an important structural component of the outer kinetochore. These physical interaction dependencies provide insights into the molecular architecture and centromere DNA loading requirements of the outer kinetochore complex.

Anaphase↗
PubMed2002

Ctf3p, the Mis6 budding yeast homolog, interacts with Mcm22p and Mcm16p at the yeast outer kinetochore.

The budding yeast kinetochore is composed of an inner and outer protein complex, which binds to centromere (CEN) DNA and attaches to microtubules. We performed a genetic synthetic dosage lethality screen to identify novel kinetochore proteins in a collection of chromosome transmission fidelity mutants. Our screen identified several new kinetochore-related proteins including YLR381Wp/Ctf3p, which is a member of a conserved family of centromere-binding proteins. Ctf3p interacts with Mcm22p, Mcm16p, and the outer kinetochore protein Ctf19p. We used chromatin immunoprecipitation to demonstrate that Ctf3p, Mcm22p, and Mcm16p bind to CEN DNA in a Ctf19p-dependent manner. In addition, Ctf3p, Mcm22p, and Mcm16p have a localization pattern similar to other kinetochore proteins. The fission yeast Ctf3p homolog, Mis6, is required for loading of a CENP-A centromere specific histone, Cnp1, onto centromere DNA. We find however that Ctf3p is not required for loading of the budding yeast CENP-A homolog, Cse4p, onto CEN DNA. In contrast, Ctf3p and Ctf19p fail to bind properly to the centromere in a cse4-1 mutant strain. We conclude that the requirements for CENP-A loading onto centromere DNA differ in fission versus budding yeast.

Amino Acid Sequence↗
PubMed2002

Reconstitution and characterization of budding yeast gamma-tubulin complex.

Nucleation of microtubules is central to assembly of the mitotic spindle, which is required for each cell division. gamma-Tubulin is a universal component essential for microtubule nucleation from centrosomes. To elucidate the mechanism of microtubule nucleation in budding yeast we reconstituted and characterized the yeast gamma-tubulin complex (Tub4p complex) produced in insect cells. The recombinant complex has the same sedimentation coefficient (11.6 S) as the native complex in yeast cell extracts and contains one molecule of Spc97p, one molecule of Spc98p, and two molecules of Tub4p. The reconstituted Tub4p complex binds preformed microtubules and has a low nucleating activity, allowing us to begin a detailed analysis of conditions that enhance this nucleating activity. We tested whether binding of the recombinant Tub4p complex to the spindle pole body docking protein Spc110p affects its nucleating activity. The solubility of recombinant Spc110p in insect cells is improved by coexpression with yeast calmodulin (Cmd1p). The Spc110p/Cmd1p complex has a small sedimentation coefficient (4.2 S) and a large Stokes radius (14.3 nm), indicative of an elongated structure. The Tub4p complex binds Spc110p/Cmd1p via Spc98p and the K(d) for binding is 150 nM. The low nucleation activity of the Tub4p complex is not enhanced when it is bound to Spc110p/Cmd1p, suggesting that it requires additional components or modifications to achieve robust activity. Finally, we report the identification of a large 22 S Tub4p complex in yeast extract that contains multimers of Spc97p similar to gamma-tubulin ring complexes found in higher eukaryotic cells.

Animals↗
PubMed2002

Pcp1p, an Spc110p-related calmodulin target at the centrosome of the fission yeast Schizosaccharomyces pombe.

In the budding yeast Saccharomyces cerevisiae, the calmodulin-binding protein Spc110p/Nuf1p facilitates mitotic spindle formation from the fungal centrosome or spindle pole body (SPB). The human Spc110p orthologue kendrin is a centrosomal, calmodulin-binding pericentrin isoform that is specifically overexpressed in carcinoma cells. Here we establish an evolutionary and functional link between Spc110p and kendrin through identification and analysis of similar calmodulin-binding proteins in the fission yeast Schizosaccharomyces pombe (Pcp1p, pole target of calmodulin in S. pombe) and the filamentous fungus Aspergillus nidulans. Like Spc110p and kendrin, Pcp1p and the A. nidulans protein contain predicted coiled-coil secondary structure and a COOH-terminal calmodulin-binding region. Green fluorescent protein fusions of Pcp1p localize to the SPB as analyzed by fluorescence and immunoelectron microscopy. Pcp1p overexpression causes chromosome missegregation, multiple mitotic spindle fragments, and multiple abnormal SPB-like structures, a phenotype remarkably similar to that of many human carcinoma lines, which exhibit chromosome and spindle defects, and supernumerary centrosomes.

Amino Acid Sequence↗