PubMed Health⌕ Search

Biomedical subjects

Tristram Chivers

Publications and source records attributed to Tristram Chivers.

At least 19 recordsLinked to original sources
PubMed2006

Synthesis, spectroscopic, and structural investigation of the cyclic [N(PR2E)2]+ cations (E = Se, Te; R = iPr, Ph): the effect of anion and R-group exchange.

Two-electron oxidation of the [N(PiPr2E)2]- anion with iodine produces the cyclic [N(PiPr2E)2]+ (E =Se, Te) cations, which exhibit long E-E bonds in the iodide salts [N(PiPr2Se)2]I (4) and [N(PiPr2Te)2]I (5). The iodide salts 4 and 5 are converted to the ion-separated salts [N(PiPr2Se)2]SbF6 (6) and [N(PiPr2Te)2]SbF6 (7) upon treatment with AgSbF6. Compounds 4-7 were characterized in solution by multinuclear NMR, vibrational, and UV-visible spectroscopy supported by DFT calculations. A structural comparison of salts 4-7 and [N(PiPr2Te)2]Cl (8) confirms that the long E-E bonds in 4, 5, and 8 can be attributed primarily to the donation of electron density from a lone pair of the halide counterion into the E-E sigma* orbital (LUMO) of the cation. The phenyl derivative [N(PPh2Te)2]I (9) was prepared in a similar manner. However, the attempted synthesis of the selenium analogue, [N(PPh2Se)2]I, produced a 1:1 mixture of [N(PPh2Se)2(mu-Se)][I] (10) and [SeP(Ph2)N(Ph2)PI] (11). DFT calculations of the formation energies of 10 and 11 support the observed decomposition. Compound 10 is a centrosymmetric dimer in which two six-membered NP2Se3 rings are bridged by two I- anions. Compound 11 produces the nine-atom chain {[N(PPh2)2Se]2(mu-O)} (12) upon hydrolysis during crystallization. The reaction between [(TMEDA)NaN(PiPr2Se)2] and SeCl2 in a 1:1 molar ratio yields the related acyclic species [SeP(iPr2)N(iPr2)PCl] (13), which was characterized by multinuclear NMR spectroscopy and an X-ray structural determination.

Journal Article↗
PubMed2006

Bis(1 degree-amino)cyclodistib(III)azanes: the first structural characterization of cis and trans isomers of a single cyclodipnict(III)azane.

The dichlorocyclodistib(III)azane [ClSb(mu-NtBu)]2 (1) has been shown to exist as the cis isomer in the solid state. A series of bis(1 degree-amino)cyclodistib(III)azanes [R'NHSb(mu-NtBu)]2 (2, R' = tBu; 3, R' = Dipp; 4, R' = Dmp) has been prepared by the reaction of 1 with 2 equiv. of LiNHR'. On the basis of NMR solution spectra, all three derivatives are formed as a mixture of cis and trans isomers. In the case of 3, the structures of both the cis and trans isomers have been determined by X-ray crystallography; cis-3 adopts an endo, endo arrangement for the amido protons of the DippNH groups. Isomerization of trans-3 into cis-3 occurs slowly in solution. Deprotonation of 2 with 2 equiv. of nBuNa or trans-3 with nBuLi produces [Na2Sb2(mu-NtBu)4] (5) and [Li2Sb2(mu-NtBu)2(mu-NDipp)2] (6), whose solvated cubane structures were established by X-ray crystallography. In contrast, the reaction of cis-3 with 2 equiv. of nBuLi produces the tricyclic compound [Li2Sb(mu-NtBu)2(mu-NDipp)(mu-NHDipp)] (7).

Journal Article↗
PubMed2006

Synthesis, spectroscopic and structural characterization of tertiary phosphine tellurium dihalides Et3PTeX2(X = Cl, Br, I).

The reactions of triethylphosphine telluride with SO2Cl2 or I2 produced the first structurally characterized tellurium-containing tertiary phosphine chalcogen dihalides, Et3PTeCl2 and Et3PTeI2, respectively, in good yields. The corresponding dibromide, Et3PTeBr2, was obtained by an in situ reaction between Et3PTeCl2 and two equivalents of Me3SiBr. This series of compounds has been characterized in the solid state by X-ray structural analyses and in solution by multinuclear NMR spectra. The structures of Et3PTeX2(X = Cl, Br, I) all show a T-shaped geometry around tellurium with weak Te...halogen interactions giving rise to centrosymmetric dimers. NMR data indicate that Et3PTeI2 exhibits the weakest P-Te bond in solution. The ionic complexes, [(Et3PO)2H]2[Te2I6] and [(Et3PO)2H]2[TeI4], were isolated from THF solutions of Et3PTeI2 and characterized by X-ray structural determinations.

Journal Article↗
PubMed2006

Zinc complexes of anionic NPPN and NP(S)PN ligands and rearrangement to the isomeric NPNP and NP(S)NP ligands in mercury complexes.

The lithium (imido)diphosphineimide Li(Et2O)[DippNPhP-P((n)Bu)PhNDipp] (1) (Dipp = 2,6-(i)Pr2C6H3) undergoes simple metathesis reactions with equimolar amounts of zinc halides, ZnCl2 and (t)BuZnBr, to give the respective N,N'-chelated complexes {Zn(micro-Cl)[DippNPhP-P((n)Bu)PhNDipp]}2 (2) and (t)BuZn[NDippPhP-P((n)Bu)PhNDipp] (3). In contrast, the reaction of two equivalents of complex 1 with HgCl2 affords the rearranged bis(imidodiphosphinoamine) complex, Hg[PhP([double bond, length as m-dash]NDipp)(micro-NDipp)P((n)Bu)Ph]2 (4), where the ligand acts as a P-centered anion. The (imido)diphosphineimide backbone of remains intact on oxidation with elemental sulfur to afford the lithium (imido)diphosphineimine sulfide complex, Li(Et2O)[DippNPhP(S)-P((n)Bu)PhNDipp] (6). Reactions of 6 with group 12 metal halides show similar behaviour to those of complex 1. The N,N' chelated metathesis products RZn[DippNPhP(S)-P((n)Bu)PhNDipp] (7, R = Cl; 8, R = (t)Bu) are obtained on reaction with ZnCl2 and (t)BuZnBr, respectively. Isomerization of the ligand backbone occurs on reaction of 6 with HgCl2 to form the homoleptic P,S-chelated mercury complex Hg[Ph(S)P(=NDipp)(micro-NDipp)P((n)Bu)Ph]2 (9). Complexes 2, 3, 4, 6, 8 and 9 have been characterized by X-ray crystallography.

Journal Article↗
PubMed2006

Syntheses and structures of magnesium and zinc boraamidinates: EPR and DFT investigations of Li, Mg, Zn, B, and In complexes of the [PhB(NtBu)2].- anion radical.

The first magnesium and zinc boraamidinate (bam) complexes have been synthesized via metathetical reactions between dilithio bams and Grignard reagents or MCl2 (M = Mg, Zn). The following new classes of bam complexes have been structurally characterized: heterobimetallic spirocycles {(L)mu-Li[PhB(mu-NtBu)2]}2M (6a,b, M = Mg, L = Et2O, THF; 6c, M = Zn, L = Et(2)O); bis(organomagnesium) complexes {[PhB(mu3-NtBu)2](MgtBu)2(mu3-Cl)Li(OEt2)3} (8) and {[PhB(mu3-NtBu)2](MgR)2(THF)2} (9a, R = iPr; 9b, R = Ph); mononuclear complex {[PhB(mu-NDipp)2]Mg(OEt2)2} (10). Oxidation of 6a or 6c with iodine produces persistent pink (16a, M = Mg) or purple (16b, M = Zn) neutral radicals {Lx-mu-Li[PhB(mu-NtBu)2]2M}. (L = solvent molecule), which are shown by EPR spectra supported by DFT calculations to be Cs-symmetric species with spin density localized on one of the bam ligands. In contrast, characterization of the intensely colored neutral radicals {[PhB(mu-NtBu)2]2M}. (5c, M = In, dark green; 5d, M = B, dark purple) reveals that the spin density is equally delocalized over all four nitrogen atoms in these D2d-symmetric spirocyclic systems. Oxidation of the dimeric dilithio complex {Li2[PhB(mu4-NtBu)2]}2 with iodine produces the monomeric neutral radical {[PhB(mu-NtBu)2]Li(OEt2)x}. (17), characterized by EPR spectra and DFT calculations. These findings establish that the bam anionic radical [PhB(NtBu)2].- can be stabilized by coordination to a variety of early main-group metal centers to give neutral radicals whose relative stabilities are compared and discussed.

Journal Article↗
PubMed2005

Chalcogenide derivatives of imidotin cage complexes.

Reaction of the secocubane [Sn3(mu2-NHtBu)2(mu2-NtBu)(mu3-NtBu)] (1) with dibutylmagnesium produces the heterobimetallic cubane [Sn3Mg(mu3-NtBu)4] (4) which forms the monochalcogenide complexes of general formula [ESn3Mg(mu3-NtBu)4] (5a, E = Se; 5b, E = Te) upon reaction with elemental chalcogens in THF. By contrast, the reaction of the anionic lithiated cubane [Sn3Li(mu3-NtBu)4]- with the appropriate quantity of selenium or tellurium leads to the sequential chalcogenation of each of the three Sn(II) centres. Pure samples of the mono- or dichalcogenides are, however, best obtained by stoichiometric redistribution reactions of [Sn3Li(mu3-NtBu)4]- and the trichalcogenides [E3Sn3Li(mu3-NtBu)4]- (E = Se, Te). These reactions are conveniently monitored by using 119Sn NMR spectroscopy. The anion [Sn3Li(mu3-NtBu)4]- also acts as an effective chalcogen-transfer reagent in reactions of selenium with the neutral cubane [{Snmu3-N(dipp)}4] (8) (dipp = 2,6-diisopropylphenyl) to give the dimer [(thf)Sn{mu-N(dipp)}2Sn(mu-Se)2Sn{mu-N(dipp)}2Sn(thf)] (9), a transformation that results in cleavage of the Sn4N4 cubane into four-membered Sn2N2 rings. The X-ray structures of 4, 5a, 5b, [Sn3Li(thf)(mu3-NtBu)4(mu3-Se)(mu2-Li)(thf)]2 (6a), [TeSn3Li(mu3-NtBu)4][Li(thf)4] (6b), [Te2Sn3Li(mu3-NtBu)4][Li([12]crown-4)2] (7b'') and 9 are presented. The fluxional behaviour of cubic imidotin chalcogenides and the correlation between NMR coupling constants and tin-chalcogen bond lengths are also discussed.

Journal Article↗
PubMed2005

Cubic and spirocyclic radicals containing a tetraimidophosphate dianion [P(NR)3(NR')]*2-.

The reaction of Cl(3)PNSiMe(3) with 3 equiv of LiHNR (R = (i)Pr, Cy, (t)Bu, Ad) in diethyl ether produces the corresponding tris(amino)(imino)phosphoranes (RNH)(3)PNSiMe(3) (1a, R = (i)Pr; 1b, R = Cy; 1c, R = (t)Bu; 1d, R = Ad); subsequent reactions of 1b-d with (n)BuLi yield the trilithiated tetraimidophosphates {Li(3)[P(NR)(3)(NSiMe(3))]} (2a, R = Cy; 2b, R = (t)Bu; 2c, R = Ad). The reaction of [((t)BuNH)(4)P]Cl with 1 equiv of (n)BuLi results in the isolation of ((t)BuNH)(3)PN(t)Bu (1e); treatment of 1e with additional (n)BuLi generates the symmetrical tetraimidophosphate {Li(3)[P(N(t)Bu)(4)]} (2d). Compounds 1 and 2 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy; X-ray structures of 1b,c were also obtained. Oxidations of 2a-c with iodine, bromine, or sulfuryl chloride produces transient radicals in the case of 2a or stable radicals of the formula {Li(2)[P(NR)(3)(NSiMe(3))]LiX.3THF}* (X = Cl, Br, I; R = (t)Bu, Ad). The stable radicals exhibit C(3) symmetry and are thought to exist in a cubic arrangement, with the monomeric LiX unit bonded to the neutral radical {Li(2)[P(NR)(3)(NSiMe(3))]}* to complete the Li(3)N(3)PX cube. Reactions of solvent-separated ion pair {[Li(THF)(4)]{Li(THF)(2)[(mu-N(t)Bu)(2)P(mu-N(t)Bu)(2)]Li(THF)(2)} (6) with I(2) or SO(2)Cl(2) produce the persistent spirocyclic radical {(THF)(2)Li(mu-N(t)Bu)(2)P(mu-N(t)Bu)Li(THF)(2)}* (10a); all radicals have been characterized by a combination of variable concentration EPR experiments and DFT calculations.

Journal Article↗
PubMed2005

Synthesis and structures of aluminum and magnesium complexes of tetraimidophosphates and trisamidothiophosphates: EPR and DFT investigations of the persistent neutral radicals {Me2Al[(mu-NR)(mu-NtBu)P(mu-NtBu)2]Li(THF)2}(*) (R = SiMe3, tBu).

Reactions of (RNH)(3)PNSiMe(3) (3a, R = (t)()Bu; 3b, R = Cy) with trimethylaluminum result in the formation of {Me(2)Al(mu-N(t)Bu)(mu-NSiMe(3))P(NH(t)()Bu)(2)]} (4) and the dimeric trisimidometaphosphate {Me(2)Al[(mu-NCy)(mu-NSiMe(3))P(mu-NCy)(2)P(mu-NCy)(mu-NSiMe(3))]AlMe(2)} (5a), respectively. The reaction of SP(NH(t)Bu)(3) (2a) with 1 or 2 equiv of AlMe(3) yields {Me(2)Al[(mu-S)(mu-N(t)Bu)P(NH(t)()Bu)(2)]} (7) and {Me(2)Al[(mu-S)(mu-N(t)()Bu)P(mu-NH(t)Bu)(mu-N(t)Bu)]AlMe(2)} (8), respectively. Metalation of 4 with (n)()BuLi produces the heterobimetallic species {Me(2)Al[(mu-N(t)Bu)(mu-NSiMe(3))P(mu-NH(t)()Bu)(mu-N(t)()Bu)]Li(THF)(2)} (9a) and {[Me(2)Al][Li](2)[P(N(t)Bu)(3)(NSiMe(3))]} (10) sequentially; in THF solutions, solvation of 10 yields an ion pair containing a spirocyclic tetraimidophosphate monoanion. Similarly, the reaction of ((t)BuNH)(3)PN(t)()Bu with AlMe(3) followed by 2 equiv of (n)BuLi generates {Me(2)Al[(mu-N(t)Bu)(2)P(mu(2)-N(t)Bu)(2)(mu(2)-THF)[Li(THF)](2)} (11a). Stoichiometric oxidations of 10 and 11a with iodine yield the neutral spirocyclic radicals {Me(2)Al[(mu-NR)(mu-N(t)Bu)P(mu-N(t)Bu)(2)]Li(THF)(2)}(*) (13a, R = SiMe(3); 14a, R = (t)Bu), which have been characterized by electron paramagnetic resonance spectroscopy. Density functional theory calculations confirm the retention of the spirocyclic structure and indicate that the spin density in these radicals is concentrated on the nitrogen atoms of the PN(2)Li ring. When 3a or 3b is treated with 0.5 equiv of dibutylmagnesium, the complexes {Mg[(mu-N(t)()Bu)(mu-NH(t)()Bu)P(NH(t)Bu)(NSiMe(3))](2)} (15) and {Mg[(mu-NCy)(mu-NSiMe(3))P(NHCy)(2)](2)} (16) are obtained, respectively. The addition of 0.5 equiv of MgBu(2) to 2a results in the formation of {Mg[(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)](2)} (17), which produces the hexameric species {[MgOH][(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)]}(6) (18) upon hydrolysis. Compounds 4, 5a, 7-11a, and 15-17 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy and, in the case of 5a, 9a.2THF, 11a, and 18, by X-ray crystallography.

Journal Article↗
PubMed2005

Electronic structures and molecular properties of chalcogen nitrides Se2N2 and SeSN2.

The electronic structures and molecular properties of S2N2 as well as the currently unknown chalcogen nitrides Se2N2 and SeSN2 have been studied using various ab initio and density functional methods. All molecules share a qualitatively similar electronic structure and can be primarily described as 2pi-electron aromatics having minor singlet diradical character of 6-8% that can be attributed solely to the nitrogen atoms. This diradical character is manifested in the prediction of their molecular properties, in which coupled cluster and multiconfigurational approaches, as well as density functional methods, show the best performance. The conventional ab initio methods RHF and MP2 completely fail to describe these systems. Predictions for the vibrational frequencies, IR intensities, Raman activities, and 14N, 15N, and 77Se chemical shifts, as well as singlet excitation energies of Se2N2 and SeSN2, have been made. The computed high-level spectroscopic data will be of considerable value in future efforts aimed at the preparation of the conducting polymers (SeN)x and (SeNSN)x.

Journal Article↗
PubMed2005

Synthetic applications of (Me3SiNSN)2E (E = S, Se) in chalcogen-nitrogen chemistry: formation and structural characterization of Cl2TeESN2 (E = S, Se) and [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, Br).

The reaction of (Me3SiNSN)2S with TeCl4 in CH2Cl2 affords Cl2TeS2N2 (1) and that of (Me3SiNSN)2Se with TeCl4 produces Cl2TeSeSN2 (2) in good yields. The products were characterized by X-ray crystallography, as well as by NMR and vibrational spectroscopy and EI mass spectrometry. The Raman spectra were assigned by utilizing DFT molecular orbital calculations. The pathway of the formation of five-membered Cl2TeESN2 rings by the reactions of (Me3SiNSN)2E with TeCl4 (E = S, Se) is discussed. The reaction of (Me3SiNSN)2Se with [PPh4]2[Pd2X6] yields [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, 4a; Br, 4b), the first examples of complexes of the (Se2N2S)2- ligand. In both cases, this ligand bridges the two palladium centers through the selenium atoms.

Journal Article↗
PubMed2005

Stable spirocyclic neutral radicals: aluminium and gallium boraamidinates.

Stable dark red (M = Al) or dark green (M = Ga) neutral radicals {[PhB(mu-NtBu)2]2M} are obtained by the oxidation of their corresponding anions with iodine, and EPR spectra supported by DFT calculations show that the spin density is equally delocalized over all four nitrogen atoms in these spiroconjugated systems.

Journal Article↗
PubMed2005

Formation of N-I charge-transfer bonds and ion pairs in polyiodides with imidotellurium cations.

[((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t))Bu)][OSO(2)CF(3)] (4a) is obtained in quantitative yields by the treatment of [((t)BuN)Te(mu-N(t)Bu)(2)Te(N(t)Bu)] (1) with HCF(3)SO(3). The reaction of 4a with LiI and iodine in the molar ratio 1:1:4.5 affords a product that, upon recrystallization from acetonitrile, was found to be a solid solution of [((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t)Bu)](2)I(20) (5a) and [((t)BuNH)Te(mu-N(t)Bu)(2)Te(NH(t)Bu)](2)I(18) (5b). Consequently, the crystal structure is disordered, containing 88.3(1)% of 5a.2MeCN and 11.7(1)% of 5b.2MeCN. The I(20) framework is involved in two symmetry-equivalent N-I-I-I-I fragments, two I(3)(-) ions, and three I(2) molecules that are linked together by I...I secondary bonding interactions. The bonding in the N-I-I-I-I fragment can be considered in terms of the lp(N) --> sigma*(I(2)) and pi(I(2)) --> sigma*(I(2)) charge-transfer interactions involving one [((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t)Bu)](+) cation and two I(2) units. The N-I bond length of 2.131(7) A, the I-I distances of 3.118(1), 3.095(2), and 2.788(2) A, and the angle I(2)-I(2) angle of 84.75(4) degrees are consistent with this bonding scheme. The I-I bond distances in the two symmetry-equivalent I(3)(-) ions are 3.113(1) and 2.792(2) A, and those in two crystallographically independent I(2) molecules are 2.736(2) and 2.743(1) A. The formal I(18)(4)(-) anion in 5b.2MeCN consists of four I(3)(-) anions and three I(2) molecules linked by I...I secondary bonds. One crystallographically independent I(3)(-) anion is connected to the [((t)BuNH)Te(mu-N(t)Bu)(2)Te(HN(t)Bu)](2+) cation by two hydrogen bonds [H...I = 2.823(5) and 2.983(5) A; N...I = 3.697(8) and 3.857(9) A]. The I(3)(-) anions and I(2) molecules in 5b show virtually identical bond parameters to those in 5a. The treatment of 1 with iodine and the reactions of its methylated derivatives, [((t)BuNMe)Te(mu-N(t)Bu)(2)Te(N(t)()Bu)][OSO(2)CF(3)] and [((t)BuNMe)Te(mu-N(t)Bu)(2)Te(MeN(t)Bu)][OSO(2)CF(3)](2), with LiI and iodine also afford highly moisture-sensitive polyiodides, either by the formation of N-I charge-transfer complexes or by ionic interactions. The crystal structures of the partially hydrolyzed products, [((t)BuIN)Te(mu-N(t))Bu)(2)Te(mu-O)](2)(I(3))(2) (3), [((t)BuMeN)Te(mu-N(t)Bu)(2)Te(mu-O)](2)(I(3))(2) (6), and 6.2MeCN, are also reported.

Journal Article↗