Biomedical subjects

Tzu-Feng Hsieh

Publications and source records attributed to Tzu-Feng Hsieh.

5 recordsLinked to original sources

PubMed2006

Thermal behavior and thermal decarboxylation of 10-hydroxycamptothecin in the solid state.

In order to investigate the thermal-related properties and thermal stability of 10-hydroxycamptothecin (10-HCPT) in the solid state, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and Fourier transform infrared (FT-IR) microspectroscopy were used. A novel combination of FT-IR microspectroscopy with thermal analyzer was applied simultaneously to monitor the dehydration and rehydration processes of the 10-HCPT sample. The thermal-induced decomposition of the 10-HCPT sample was also determined by using electrospray-ion trap mass spectrometry (ES-ITMS). The results indicated that the 10-HCPT sample used in this study was a monohydrate in structure, this form that can dehydrate to an anhydrate form if the temperature goes beyond 90 degrees C. The 10-HCPT anhydrate was first suggested to have two polymorphs, in which the form I might transform to form II when the 110 degrees C-preheated sample was cooled to 30 degrees C. The polymorphic transformation temperature was shown within 90-120 degrees C with 10.46 kcal/mol of enthalpy. The peak at 1723 cm(-1) found in the IR spectrum of 10-HCPT monohydrate might correspond to the hydrogen-bonded CO stretching vibration of lactone, which shifted to 1750 cm(-1) assigned to a free CO group of lactone after the destruction of hydrogen bonding via dehydration. This suggests that monohydrate seems to interact intramolecularly with 10-HCPT by hydrogen bonding. However, the rehydration process of the 10-HCPT anhydrate might cause it to return to being a monohydrate, depending on the storage condition. In addition, the thermal-induced decarboxylation of the solid-state 10-HCPT when the temperature is beyond 226 degrees C was proven by the appearance of a new IR peak at 1701 cm(-1) and one major mass spectral peak at m/z 321. This unique IR spectral peak at 1701 cm(-1) was due to the conjugated carbonyl group in the degraded product of 10-HCPT. The m/z 321 assigned to the decarboxylation of 10-HCPT was equal to the molecular weight loss of 44 from mass spectra; which was consistent with the weight loss of 11.9% (molecular weight of 43.3) from TGA curve of 10-HCPT anhydrate.

Antineoplastic Agents, Phytogenic↗

PubMed2005

Mechanical compression affecting the thermal-induced conformational stability and denaturation temperature of human fibrinogen.

Thermal-induced conformational stability and changes in denaturation temperature of human fibrinogen (FBG) after different mechanical compressions were investigated by a simultaneous Fourier transform infrared microspectroscopy equipped with thermal analyzer (thermal FTIR microscopic system). The confocal Raman microspectroscopy was also applied to determine the thermal reversibility of solid FBG. FBG powder was pressed on one KBr pellet (1 KBr method) or sealed within two KBr pellets (2 KBr method) by different mechanical compressions. The result indicates that there was no marked difference in the thermal behavior for the solid FBG samples prepared by 1 KBr method in the heating process even under different mechanical compression pressures, in which the thermal-induced denaturation temperatures from native to denatured state were maintained constant at 66-67 degrees C. However, the denaturation temperature for the solid FBG samples prepared by 2 KBr method was shifted from 55 to 62 degrees C with the increase of mechanical compression pressure. A good linear correlation was also found between the denaturation temperature and mechanical compression pressure for FBG samples prepared by 2 KBr method. The solid FBG sample, whether prepared by 1 KBr or 2 KBr method, was also found to show the thermal-irreversible property.

Bromides↗

PubMed2005

pH- and thermal-dependent conformational transition of PGAIPG, a repeated hexapeptide sequence from tropoelastin.

The secondary structure of PGAIPG (Pro-Gly-Ala-IIe-Pro-Gly), a repeated hexapeptide of tropoelastin, in buffer solution of different pH was determined by using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. The thermal-dependent structural change of PGAIPG in aqueous solution or in solid state was also examined by thermal FTIR microspectroscopy. The conformation of PGAIPG in aqueous solution exhibited a pH-dependent structural characterization. A predominant peak at 1614 cm(-1) (aggregated beta-sheet) with a shoulder near 1560 cm(-1) (beta-sheet) appeared in pH 5.5-8.5 buffer solutions. A new broad shoulder at 1651 cm(-1) (random coil and/or alpha-helix) with 1614 cm(-1) was observed in the pH 4.5 buffer solution. However, the broad shoulder at 1651 cm(-1) was converted to a maximum peak at 1679 cm(-1) (beta-turn/antiparallel beta-sheet) when the pH shifted from 4.5 to 3.5, but the original pronounced peak at 1614 cm(-1) became a shoulder. Once the pH was lowered to 2.5, the IR spectrum of PGAIPG was dominated by major absorption at 1679 cm(-1) with a minor peak at 1552 cm(-1) (alpha-helix/random coil). The result indicates that the pH was a predominant factor to transform PGAIPG structure from aggregated beta-sheet (pH 8.5) to beta-turn/intermolecular antiparallel beta-sheet (pH 2.5). Moreover, a partial conformation of PGAIPG with minor alpha-helix/random coil structures was also explored in the lower pH buffer solution. There was no thermal-dependent structural change for solid-state PGAIPG. The thermal-induced formation of aggregated beta-sheet for PGAIPG in aqueous solution was found from 28 to 30 degrees C, however, which might be correlated with the formation of an opaque gel that turned from clear solution. The formation of aggregated beta-sheet structure for PGAIPG beyond 30 degrees C might be due to the intermolecular hydrogen bonded interaction between the hydrophobic PGAIPG fragments induced by coacervation.

Amino Acid Sequence↗

PubMed2004

Temperature effect on the structural stability, similarity, and reversibility of human serum albumin in different states.

In order to investigate the thermal stability of human serum albumin (HAS) in three different states (aqueous solution, cast film, and solid powder), Fourier transform infrared (FTIR) spectroscopy was applied to determine the protein secondary structural changes of these HSA samples under non-isothermal or isothermal condition. The structural similarity of HSA before and after thermal treatment was also studied to estimate the thermo-reversible property of the HSA in these different states. The results indicate that with the increase of temperature, the maximum peaks at 1652 and 1547 cm(-1) (alpha-helix) shifted to 1647 and 1542 cm(-1) (random coil), respectively. An additional peak at 1620 cm(-1) assigned to intermolecular beta-sheet structure clearly appeared with temperature. The alpha-helix content was found to be reduced in favor of the formation of intermolecular hydrogen-bonded antiparallel beta-sheet structure beyond 60 degrees C in the heating process. From the data of structural similarity, HSA sample whether in solid powder or cast film form exhibited a better thermo-reversible property than HSA in aqueous solution even heating to 200 degrees C.

Drug Stability↗

PubMed2004

Pressure dependence of human fibrinogen correlated to the conformational alpha-helix to beta-sheet transition: an Fourier transform infrared study microspectroscopic study.

We used Fourier transform infrared (FTIR) microspectroscopy to investigate pressure-induced conformational changes in secondary structure of fibrinogen (FBG). Solid state FBG was compressed on a KBr pellet (1KBr method) or between two KBr pellets (2KBr method). The peak positions of the original and second-derivative ir spectra of compressed FBG samples prepared by the 1KBr method were similar to FBG sample without pressure. When FBG was prepared by the 2KBr method and pressure was increased up to 400 kg/cm(2), peaks at 1625 (intermolecular beta-sheet) and 1611 (beta-sheet aggregates structure and/or the side-chain absorption of the tyrosine residues) cm(-1) were enhanced. The peaks near 1661 (beta-sheet) and 1652 (alpha-helix) cm(-1) also exhibited a marked change with pressure. A linear correlation was found between the peak intensity ratio of 1611/1652 cm(-1) (r = 0.9879) or 1625/1652 cm(-1) (r = 0.9752) and applied pressure. The curve-fitted compositional changes in secondary structure of FBG also indicate that the composition of the alpha-helix structure (1657-1659 cm(-1)) was gradually reduced with the increase in compression pressure, but the composition of the beta-sheet structure (1681, 1629, and 1609 cm(-1)) gradually increased. This indicates that pressure-induced conformational changes in FBG include not only transformations from alpha-helix to beta-sheet structure, but also unfolding and denaturation of FBG and the formation of aggregates.

Fibrinogen↗