Biomedical subjects

U Aebi

Publications and source records attributed to U Aebi.

At least 19 recordsLinked to original sources

PubMed1998

Distinct subcellular localization of calcium binding S100 proteins in human smooth muscle cells and their relocation in response to rises in intracellular calcium.

Changes in cytosolic Ca2+ concentration control a wide range of cellular responses, and intracellular Ca2+-binding proteins are the key molecules to transduce Ca2+ signaling via interactions with different types of target proteins. Among these, S100 Ca2+-binding proteins, characterized by a common structural motif, the EF-hand, have recently attracted major interest due to their cell- and tissue-specific expression pattern and involvement in various pathological processes. The aim of our study was to identify the subcellular localization of S100 proteins in vascular smooth muscle cell lines derived from human aorta and intestinal smooth muscles, and in primary cell cultures derived from arterial smooth muscle tissue under normal conditions and after stimulation of the intracellular Ca2+ concentration. Confocal laser scanning microscopy was used with a specially designed colocalization software. Distinct intracellular localization of S100 proteins was observed: S100A6 was present in the sarcoplasmic reticulum as well as in the cell nucleus. S100A1 and S100A4 were found predominantly in the cytosol where they were strongly associated with the sarcoplasmic reticulum and with actin stress fibers. In contrast, S100A2 was located primarily in the cell nucleus. Using a sedimentation assay and subsequent electron microscopy after negative staining, we demonstrated that S100A1 directly interacts with filamentous actin in a Ca2+-dependent manner. After thapsigargin (1 microM) induced increase of the intracellular Ca2+ concentration, specific vesicular structures in the sarcoplasmic reticulum region of the cell were formed with high S100 protein content. In conclusion, we demonstrated a distinct subcellular localization pattern of S100 proteins and their interaction with actin filaments and the sarcoplasmic reticulum in human smooth muscle cells. The specific translocation of S100 proteins after intracellular Ca2+ increase supports the hypothesis that S100 proteins exert several important functions in the regulation of Ca2+ homeostasis in smooth muscle cells.

Aorta↗

PubMed1998

Rat GTP cyclohydrolase I is a homodecameric protein complex containing high-affinity calcium-binding sites.

Recombinant rat liver GTP cyclohydrolase I has been prepared by heterologous gene expression in Escherichia coli and characterized by biochemical and biophysical methods. Correlation averaged electron micrograph images of preferentially oriented enzyme particles revealed a fivefold rotational symmetry of the doughnut-shaped views with an average particle diameter of 10 nm. Analytical ultracentrifugation and quantitative scanning transmission electron microscopy yielded average molecular masses of 270 kDa and 275 kDa, respectively. Like the Escherichia coli homolog, these findings suggest that the active enzyme forms a homodecameric protein complex consisting of two fivefold symmetric pentameric rings associated face-to-face. Examination of the amino acid sequence combined with calcium-binding experiments and mutational analysis revealed a high-affinity, EF-hand-like calcium-binding loop motif in eukaryotic enzyme species, which is absent in bacteria. Intrinsic fluorescence measurements yielded an approximate dissociation constant of 10 nM for calcium and no significant binding of magnesium. Interestingly, a loss of calcium-binding capacity observed for two rationally designed mutations within the presumed calcium-binding loop of the rat GTP cyclohydrolase I yielded a 45% decrease in enzyme activity. This finding suggests that failure of calcium binding may be the consequence of a mutation recently identified in the causative GTP cyclohydrolase I gene of patients suffering from dopa responsive dystonia.

Animals↗

PubMed1998

An atomic model of crystalline actin tubes: combining electron microscopy with X-ray crystallography.

The packing of the G-actin monomers within crystalline actin tubes was investigated at atomic detail. To achieve this, we have chosen an integrated structural approach which combines intermediate resolution electron microscopy based 3-D reconstruction and surface metal shadowing of crystalline actin tubes with atomic resolution X-ray data of the G-actin monomer. Distinct from the parallel, half-staggered packing of the actin subunits within F-actin filaments, the arrangement of actin monomers within the crystalline tubes involves antiparallel packing into dimers with p2 symmetry. Within the crystalline tubes, the actin monomers are oriented so that the filament axis runs parallel with the sheet plane and the intersubunit contacts in this direction are similar to those existing along the two long-pitch helical strands of the F-actin filament. The other intersubunit contacts within the crystalline tubes are not found in the actin filament. The ability of actin to form a variety of polymorphic oligomers is still not fully understood, and the functional implications of this variability have yet to be deciphered. Regularly packed actin assemblies such as sheets, tubes or ribbons may ultimately yield structural relationships to in vivo relevant actin oligomers such as, for example, the "lower dimer".

Actins↗

PubMed1998

A distinct 14 residue site triggers coiled-coil formation in cortexillin I.

We have investigated the process of the assembly of the Dictyostelium discoideum cortexillin I oligomerization domain (Ir) into a tightly packed, two-stranded, parallel coiled-coil structure using a variety of recombinant polypeptide chain fragments. The structures of these Ir fragments were analyzed by circular dichroism spectroscopy, analytical ultracentrifugation and electron microscopy. Deletion mapping identified a distinct 14 residue site within the Ir coiled coil, Arg311-Asp324, which was absolutely necessary for dimer formation, indicating that heptad repeats alone are not sufficient for stable coiled-coil formation. Moreover, deletion of the six N-terminal heptad repeats of Ir led to the formation of a four- rather than a two-helix structure, suggesting that the full-length cortexillin I coiled-coil domain behaves as a cooperative folding unit. Most interestingly, a 16 residue peptide containing the distinct coiled-coil 'trigger' site Arg311-Asp324 yielded approximately 30% helix formation as monomer, in aqueous solution. pH titration and NaCl screening experiments revealed that the peptide's helicity depends strongly on pH and ionic strength, indicating that electrostatic interactions by charged side chains within the peptide are critical in stabilizing its monomer helix. Taken together, these findings demonstrate that Arg311-Asp324 behaves as an autonomous helical folding unit and that this distinct Ir segment controls the process of coiled-coil formation of cortexillin I.

Amino Acid Sequence↗

PubMed1998

Evaluating atomic models of F-actin with an undecagold-tagged phalloidin derivative.

We have prepared an undecagold-tagged phalloidin derivative to determine this mushroom toxin's binding site and orientation within the F-actin filament by scanning transmission electron microscopy (STEM) and 3-D helical reconstruction. Remarkably, when stoichiometrically bound to F-actin, the undecagold moiety of the derivative could be directly visualized by STEM along the two half-staggered long-pitch helical strands of single filaments. Most importantly, the structural data obtained when combined with various biochemical constraints enabled us to critically evaluate two distinct atomic models of the F-actin filament (i.e. the Holmes-Lorenz versus the Schutt-Lindberg model). Taken together, our data are in excellent agreement with the Holmes-Lorenz model.

Actins↗

PubMed1998

Interaction of monomeric and dimeric kinesin with microtubules.

The binding stoichiometry of kinesin to microtubules was determined using several biochemical and biophysical approaches (chemical crosslinking, binding assays, scanning transmission electron microscopy (STEM), image reconstruction, and X-ray scattering). The results show that each tubulin dimer associates with one kinesin head, irrespective of whether kinesin occurs in a monomeric or dimeric form in solution. Moreover, these heads appear to align along the protofilament axis generating a 16 nm periodicity of successive kinesin dimers. This is consistent with a "tightrope" model of movement where the first head of the dimer provides a guiding signal for the following one.

Animals↗

PubMed1998

Intermediate filament assembly: fibrillogenesis is driven by decisive dimer-dimer interactions.

Intermediate filaments are built from one to several members of a multigene family encoding fibrous proteins that share a highly conserved hierarchic assembly plan for the formation of multistranded filaments from distinctly structured extended coiled coils. Despite the rather low primary sequence identity, intermediate filaments form apparently similar filaments with regard to their spatial dimensions and physical properties. Over the past few years, substantial progress has been made in the elucidation of the complex expression patterns and clinically relevant phenotypes of intermediate filaments. The key question of how these filaments assemble and what the molecular architecture of their distinct assembly intermediates comprises, however, has still not been answered to the extent that has been achieved for microfilaments and microtubules.

Animals↗

PubMed1998

Severe osteolysis after third-body wear due to hydroxyapatite particles from acetabular cup coating.

One concern about the fixation of HA-coated implants is the possible disintegration of the surface, with the migration of HA granules into the joint space, producing third-body wear. We report a study of six revisions of HA-coated polyethylene RM cups at 9 to 14 years after successful primary arthroplasty. In all six hips, we found HA granules embedded in the articulating surface of the polyethylene, with abrasive wear of the cup and the metal femoral head. The cup had loosened in four hips and three showed severe osteolysis of the proximal femur. Third-body wear due to HA particles from implant coating may produce severe clinical problems with few early warning signs. Further clinical, radiological and histological observations are needed to determine the possible incidence of this late complication in the various types of coating of a variety of substrates.

Acetabulum↗

PubMed1997

In vitro assembly of Drosophila lamin Dm0--lamin polymerization properties are conserved.

Vertebrate nuclear lamins exhibit polymerization properties that are remarkably different from those of vertebrate cytoplasmic intermediate filament (IF) proteins. Notably, under conditions where vertebrate cytoplasmic IF proteins form tetramers consisting of laterally associated dimers, nuclear lamin dimers associate longitudinally into head-to-tail polymers. Also, in vitro, nuclear lamins readily form paracrystalline fibers, rather than stable 10-nm filaments. To investigate whether these properties are also shared with invertebrate nuclear lamins, we analyzed in considerable detail the polymerization behavior of recombinant full-length lamin Dm0 from the invertebrate Drosophila melanogaster. This lamin differs substantially from vertebrate lamins in its primary structure. We also analyzed lamin Dm0-derived fragments lacking either the head domain (headless), the tail domain (tailless), or both (rod). Like vertebrate lamins, full-length Drosophila lamin Dm0 assembled into head-to-tail polymers, with little or no formation of tetramers by lateral association of dimers. This longitudinal assembly was severely inhibited by deletion of the head domain. Removal of the tail domain led to increased formation of filamentous polymers. Under appropriate conditions, full-length Drosophila lamin Dm0 as well as the three lamin Dm0-derived fragments assembled into paracrystalline fibers. No steady-state condition tested yielded assembly of 10-nm filaments resembling those formed by vertebrate cytoplasmic IF proteins. These findings indicate that the in vitro assembly behavior of nuclear lamins is highly conserved but distinct from that of cytoplasmic IF proteins, thus evidencing its functional importance.

Animals↗

PubMed1997

A correlative analysis of actin filament assembly, structure, and dynamics.

The effect of the type of metal ion (i.e., Ca2+, Mg2+, or none) bound to the high-affinity divalent cation binding site (HAS) of actin on filament assembly, structure, and dynamics was investigated in the absence and presence of the mushroom toxin phalloidin. In agreement with earlier reports, we found the polymerization reaction of G-actin into F-actin filaments to be tightly controlled by the type of divalent cation residing in its HAS. Moreover, novel polymerization data are presented indicating that LD, a dimer unproductive by itself, does incorporate into growing F-actin filaments. This observation suggests that during actin filament formation, in addition to the obligatory nucleation- condensation pathway involving UD, a productive filament dimer, a facultative, LD-based pathway is implicated whose abundance strongly depends on the exact polymerization conditions chosen. The "ragged" and "branched" filaments observed during the early stages of assembly represent a hallmark of LD incorporation and might be key to producing an actin meshwork capable of rapidly assembling and disassembling in highly motile cells. Hence, LD incorporation into growing actin filaments might provide an additional level of regulation of actin cytoskeleton dynamics. Regarding the structure and mechanical properties of the F-actin filament at steady state, no significant correlation with the divalent cation residing in its HAS was found. However, compared to native filaments, phalloidin-stabilized filaments were stiffer and yielded subtle but significant structural changes. Together, our data indicate that whereas the G-actin conformation is tightly controlled by the divalent cation in its HAS, the F-actin conformation appears more robust than this variation. Hence, we conclude that the structure and dynamics of the Mg-F-actin moiety within the thin filament are not significantly modulated by the cyclic Ca2+ release as it occurs in muscle contraction to regulate the actomyosin interaction via troponin.

Actins↗

PubMed1997

The human alpha-type proteasomal subunit HsC8 forms a double ringlike structure, but does not assemble into proteasome-like particles with the beta-type subunits HsDelta or HsBPROS26.

The eukaryotic proteasome is a barrel-shaped protease complex made up of four seven-membered rings of which the outer and inner rings may contain up to seven different alpha- and beta-type subunits, respectively. The assembly of the eukaryotic proteasome is not well understood. We cloned the cDNA for HsC8, which is one of the seven known human alpha-type subunits, and produced the protein in Escherichia coli. Recombinant HsC8 protein forms a complex of about 540 kDa consisting of double ringlike structures, each ring containing seven subunits. Such a structure has not earlier been reported for any eukaryotic proteasome subunit, but is similar to the complex formed by the recombinant alpha-subunit of the archaebacterium Thermoplasma acidophilum (Zwickl, P., Kleinz, J., and Baumeister, W. (1994) Nat. Struct. Biol. 1, 765-770). The ability of HsC8 to form alpha-rings suggests that these complexes may play an important role in the initiation of proteasome assembly in eukaryotes. To test this, we used two human beta-type subunits, HsBPROS26 and HsDelta. Both these beta-type subunits, either in the proprotein or in the mature form, exist in monomers up to tetramers. In contrast to the alpha- and beta-subunit of T. acidophilum, coexpression of the human beta-type subunits with HsC8 does not result in the formation of proteasome-like particles, which would be in agreement with the notion that proteasome assembly in eukaryotes is much more complex than in archaebacteria.

Cysteine Endopeptidases↗

PubMed1997

Polymorphic fibrillar assembly of human amylin.

Human amylin forms fibrillar amyloid between pancreatic islet cells in patients with non-insulin-dependent (type 2) diabetes mellitus. Fibrillar assemblies also form in vitro in aqueous solutions of synthetic human amylin. We now report on the structural polymorphism of these fibrils. The thinnest fibril, referred to as the protofibril, has an apparent width of 5 nm but is only rarely observed by itself. These protofibrils spontaneously assemble into higher order fibrillar structures with distinct morphologies. Prominent among these is an 8-nm fibril with a distinct 25-nm axial crossover repeat which is formed by left-handed coiling of two 5-nm protofibrils. Coiling of more than two 5-nm protofibrils results in cable-like structures of variable width depending on the number of protofibrils involved. Lateral (side-by-side) assembly of 5-nm protofibrils is also observed and produces ribbons which may contain two, three, four, or more protofibrils and occasionally large single-layered sheets. The mass-per-length (MPL) of the 5-nm protofibril is 10 kDa/nm. This has been established in two ways: first, the 8-nm fibril, which is formed by coiling two 5-nm protofibrils around each other, has an MPL of 20 kDa/nm. Second, higher order fibrils differ by increments of 10 kDa/nm. Hence, about 2.6 human amylin molecules (3904 Da) are packed in 1 nm of protofibril length. Similarities exist between amylin fibrils and those formed from other amyloid proteins, suggesting that the in vitro assembly of synthetic protein may serve as a useful model system in advancing our understanding of amyloid formation in disease.

Amyloid↗

PubMed1997

Visualization of prosomes (MCP-proteasomes), intermediate filament and actin networks by "instantaneous fixation" preserving the cytoskeleton.

A new "instantaneous" fixation/extraction procedure, yielding good preservation of intermediate filaments (IFs) and actin filaments when applied at 37 degrees C, has been explored to reexamine the relationships of the prosomes to the cytoskeleton. Prosomes are protein complexes of variable subunit composition, including occasionally a small RNA, which were originally observed as trans-acting factors in untranslated mRNPs. Constituting also the proteolytic core of the 26S proteasomes, they are also called "multicatalytic proteinase (MCP) complexes" or "20S-Proteasomes." In Triton X-100-extracted epithelial, fibroblastic, and muscle cells, prosome particles were found associated primarily with the IFs (Olink-Coux et al., 1994). Application of "instantaneous fixation" has now led to the new observation that a major fraction of prosome particles, composed of specific sets of subunits, is distributed in variable proportions between the IFs and the microfilament/ stress fiber system in PtK1 epithelial cells and human fibroblasts. Electron microscopy using gold-labeled antibodies confirms this dual localization on classical whole mounts and on cells exposed to instantaneous fixation. In contrast to the resistance of the prosome-IF association, a variable fraction of the prosome particles is released from the actin cytoskeleton by Triton X-100 when applied prior to fixation. Moreover, in vitro copolymerization of prosomes with G-actin made it possible to observe "ladder-like" filamentous structures in the electron microscope, in which the prosome particles, like the "rungs of a ladder," laterally crosslink two or more actin filaments in a regular pattern. These results demonstrate that prosomes are bound in the cell not only to IFs but also to the actin cytoskeleton and, furthermore, not only within large M(r) complexes (possibly mRNPs and/or 26S proteasomes), but also directly, as individual prosome particles.

Actin Cytoskeleton↗

PubMed1997

Actin: from cell biology to atomic detail.

Over the past 2 decades our knowledge about actin filaments has evolved from a rigid "pearls on a string" model to that of a complex, highly dynamic protein polymer which can now be analyzed at atomic detail. To achieve this, exploring actin's oligomerization, polymerization, polymorphism, and dynamic behavior has been crucial to understanding in detail how this abundant and ubiquitous protein can fulfill its various functions within living cells. In this review, a correlative view of a number of distinct aspects of actin is presented, and the functional implications of recent structural, biochemical, and mechanical data are critically evaluated. Rational analysis of these various experimental data is achieved using an integrated structural approach which combines intermediate-resolution electron microscopy-based 3-D reconstructions of entire actin filaments with atomic resolution X-ray data of monomeric and polymeric actin.

Actin Cytoskeleton↗

PubMed1997

In vitro reconstitution of a heterotrimeric nucleoporin complex consisting of recombinant Nsp1p, Nup49p, and Nup57p.

The yeast nucleoporins Nsp1p, Nup49p, and Nup57p form a complex at the nuclear pores which is involved in nucleocytoplasmic transport. To investigate the molecular basis underlying complex formation, recombinant full-length Nup49p and Nup57p and the carboxyl-terminal domain of Nsp1p, which lacks the FXFG repeat domain, were expressed in Escherichia coli. When the three purified proteins were mixed together, they spontaneously associated to form a 150-kDa complex of 1:1:1 stoichiometry. In this trimeric complex, Nup57p fulfills the role of an organizing center, to which Nup49p and Nsp1p individually bind. For this interaction to occur, only two heptad repeat regions of the Nsp1p carboxyl-terminal domain are required, each region being about 50 amino acids in length. Finally, the reconstituted complex has the capability to bind to full-length Nic96p but not to mutant forms which also do not interact in vivo. When added to permeabilized yeast cells, the complex associates with the nuclear envelope and the nuclear pores. We conclude that Nsp1p, Nup49p, and Nup57p can reconstitute a complex in vitro which is competent for further assembly with other components of nuclear pores.

Binding Sites↗

PubMed1997

To bead or not to bead? Lens-specific intermediate filaments revisited.

For nearly three decades cytoplasmic intermediate filaments (IFs) have been described as 10 nm thick, unbranched ropes radiating from the cell nucleus and extending to the plasma membrane. This stereotype is now being challenged by the discovery and molecular characterization of the beaded filaments (BFs), a novel class of IFs composed of the lens-specific proteins filensin and phakinin. In contrast to 'mainstream' IFs, BFs have a distinctly nodular appearance and form a meshwork underneath the plasma membrane of the lens fiber cells. In vitro assembly studies, expression of filensin and phakinin in cultured cells, and analysis of the corresponding genes reveal that these proteins have evolved from two different subfamilies of IF proteins, thus yielding a unique structure. The new information provides a basis for understanding how the various forms of tissue-specific IF proteins might have developed adopting to the constraints of a specialized environment.

Animals↗

PubMed1997

Punch-wounded, fibroblast populated collagen matrices: a novel approach for studying cytoskeletal changes in three dimensions by confocal laser scanning microscopy.

Depending on growth conditions and cell type, collagen matrices populated with viable cells, i.e. commonly with fibroblasts, contract in a manner resembling wound contraction in vivo. If matrix cultures can be grown to provide the environment of contracting wounds in vitro, other conditions may be established under which fibroblasts grow reminiscent of those in normal dermis. Wounding such dermal equivalents may then initiate cells to change their phenotype in space and time in an in vivo-like environment. In turn, such a system should allow to study the underlying cytoskeletal changes at the onset of tissue repair and beyond. To test this hypothesis, we established the conditions for human skin-derived fibroblasts (KD cells) to grow within collagen matrices without contraction. We then excised from the center of such "attached, low-contracting dermal equivalents" (ALDE) "punch biopsies" with a diameter of 1 mm, and monitored the cell's shape and their microtubular networks and F-actin-containing structures over time by i) conventional fluorescence microscopy and ii) by confocal laser scanning microscopy in combination with optical sectioning and volume rendering software. Prior to wounding and in non-wounded controls up to 8 days post seeding (ps), cells predominantly exhibited an elongated, spindle-shaped morphology with distinct microtubular networks and F-actin-containing structures. Wounding induced most of the fibroblasts lining the wound edge to immediately round up. The round cells still revealed a microtubular network but only diffuse labeling for F-actin. One day post wounding (pw), these fibroblasts had resumed their spindle-shaped structure. They displayed the microtubular network and again thin F-actin-containing structures. From 2 days pw on and up to 6 days pw, the number of fibroblasts in the wound zone had increased, forming dense, multilayered patches oriented parallel to the wound surface, and the cells lining the wound margin showed the most extensive and massive F-actin-containing stress fiber-like structures. Quantification of the cell densities at the wound margin and in adjacent zones corroborated this increase, which is reminiscent of the fibroblasts migrating to the wound edge in the early phase of connective tissue repair.

Actins↗

PubMed1996

Structure and assembly properties of the intermediate filament protein vimentin: the role of its head, rod and tail domains.

We have investigated the functional role of the non-helical end domains of vimentin on its assembly properties using truncated Xenopus and human recombinant proteins. Removal of the amino-terminal "head" domain yielded a molecule that did not assemble into 10 nm filaments but remained in a soluble oligomeric particle form with a sedimentation coefficient considerably smaller than that of wild-type vimentin (Vim(wt)). In contrast, removal of the carboxy-terminal "tail" domain had no obvious effect on the sedimentation characteristics. In particular, sedimentation equilibrium analysis under low ionic strength conditions yielded oligomeric particle species of Mr 135,000 to 360,000, indistinguishable from those obtained with Vim(wt). When induced to form filaments from this state by rapid dilution into filament forming buffer, Vim(wt) and Vim(deltaT) protein generated similar viscosity profiles. However, as determined by scanning transmission electron microscopy, under these conditions Vim(deltaT) formed filaments of heterogeneous diameter, corresponding to various distinct mass-per-length (MPL) values: whereas Vim(wt) yielded MPL values peaking between 40 and 45 kDa/nm, Vim(deltaT) filaments produced histograms which could be fitted by three Gaussian curves peaking between 37 and 131 kDa/nm. In contrast, when dialyzed against, instead of being rapidly diluted into, filament forming buffer, Vim(deltaT) gave histograms with one major peak at about 54 kDa/nm. The MPL heterogeneity observed for Vim(deltaT) was already evident at the earliest stages of assembly. For example, ten seconds after initiation, "unit-length" filament segments (58 to 63 nm) were formed with both wt and deltaT proteins, but the diameters were considerably larger for Vim(deltaT) compared to Vim(wt) (20(+/- 3) nm versus 16(+/- 3)nm), indicating a distinct role of the carboxy-terminal tail domain in the width control during unit-length filament formation. Despite this difference both Vim(deltaT) and Vim(wt) filaments appeared to grow stepwise in a modular fashion from such unit-length filament segments. This suggests that assembly occurred by a principally similar mechanism involving the end-on-fusion or annealing of unit-length filaments.

Amino Acid Sequence↗