Biomedical subjects

U Techavipoo

Publications and source records attributed to U Techavipoo.

5 recordsLinked to original sources

PubMed2004

Semiautomated thermal lesion segmentation for three-dimensional elastographic imaging.

Several studies have demonstrated that lesion volumes computed from multiple planar slices through the region-of-interest (ROI) are more accurate than volumes estimated assuming simple shapes and incorporating single or orthogonal diameter estimates. However, manual delineation of boundaries on multiple planar 2-D images is tedious and labor-intensive. Automatic extraction of lesion boundaries is, therefore, attractive and imperative to remove subjectivity and reduce assessment time. This paper presents a semiautomated segmentation algorithm for thermal lesions on 3-D elastographic data to obtain both area and volume information. The semiautomated segmentation algorithm is based on thresholding and morphologic opening of both 2-D and 3-D elastographic data. Results obtained on 44 thermal lesions imaged in vitro using elastography were compared to manual delineation of both elastographic and pathology images. Results obtained using semiautomated segmentation demonstrate a close correspondence with manual delineation results. However, area and volume estimates obtained using both manual and semiautomated segmentation of lesions seen on elastograms slightly underestimate areas and volumes measured from pathology.

Algorithms↗

PubMed2004

Estimation of displacement vectors and strain tensors in elastography using angular insonifications.

In current practice, only one out of three components of the tissue displacement vector and one of nine components of the strain tensor are accurately estimated and imaged in ultrasound elastography. Since, only the axial component of both the displacement and strain are imaged, other important elastic parameters, such as shear strains and the Poisson's ratio, also are not imaged. Moreover, reconstruction of the Young's modulus would be significantly improved if all components of the strain tensor were available. In this paper, we describe a new method for estimating all the components of the tissue displacement vector following a quasi-static compression. The method uses displacements estimated from radiofrequency echo-signals along multiple ultrasound beam insonification directions. At each spatial location in the compressed medium, orthogonal tissue displacements in both the axial and lateral direction with respect to the direction of the applied compression are estimated by curve fitting angular displacement vector data calculated for all insonification directions. Following displacement estimation in orthogonal directions, components of the corresponding normal and shear strain tensors are estimated. Simulation and experimental results demonstrate the utility of this technique for the computation of the normal and shear strain tensors.

Algorithms↗

PubMed2004

Temperature dependence of ultrasonic propagation speed and attenuation in excised canine liver tissue measured using transmitted and reflected pulses.

Previous reported data from our laboratory demonstrated the temperature dependence of propagation speed and attenuation of canine tissue in vitro at discrete temperatures ranging from 25 to 95 degrees C. However, concerns were raised regarding heating the same tissue specimen over the entire temperature range, a process that may introduce irreversible and, presumably, cumulative tissue degradation. In this paper propagation speed and attenuation vs temperature are measured using multiple groups of samples, each group heated to a different temperature. Sample thicknesses are measured directly using a technique that uses both transmitted and reflected ultrasound pulses. Results obtained using 3 and 5 MHz center frequencies demonstrate a propagation speed elevation of around 20 m/s in the 22-60 degrees C range, and a decrease of 15 m/s in the 60-90 degrees C range, in agreement with previous results where the same specimens were subjected to the entire temperature range. However, sound speed results reported here are slightly higher than those reported previously, probably due to more accurate measurements of sample thickness in the present experiments. Results also demonstrate that while the propagation speed varies with temperature, it is not a function of tissue coagulation. In contrast, the attenuation coefficient depends on both tissue coagulation effects and temperature elevation.

Animals↗

PubMed2002

Ultrasound monitoring of temperature change during radiofrequency ablation: preliminary in-vivo results.

Radiofrequency (RF) ablation is an interstitial focal ablative therapy that can be used in a percutaneous fashion and permits in situ destruction of hepatic tumors. However, local tumor recurrence rates after RF ablative therapy are as high as 34% to 55%, which may be due in part to the inability to monitor accurately temperature profiles in the tissue being ablated, and to visualize the subsequent zone of necrosis (thermal lesion) formed. The goal of the work described in this paper was to investigate methods for the real-time and in vivo monitoring of the spatial distribution of heating and temperature elevation to achieve better control of the degree of tissue damage during RF ablation therapy. Temperature estimates are obtained using a cross-correlation algorithm applied to RF ultrasound (US) echo signal data acquired at discrete intervals during heating. These temperature maps were used to display the initial temperature rise and to continuously update a thermal map of the treated region. Temperature monitoring is currently performed using thermosensors on the prongs (tines) of the RF ablation probe. However, monitoring the spatial distribution of heating is necessary to control the degree of tissue damage produced.

Animals↗

PubMed2002

Temperature dependence of ultrasonic propagation speed and attenuation in canine tissue.

Previously reported data on the temperature dependence of propagation speed in tissues generally span only temperature ranges up to 60 degrees C. However, with the emerging use of thermal ablative therapies, information on variation in this parameter over higher temperature ranges is needed. Measurements of the ultrasonic propagation speed and attenuation in tissue in vitro at discrete temperatures ranging from 25 to 95 degrees C was performed for canine liver, muscle, kidney and prostate using 3 and 5 MHz center frequencies. The objective was to produce information for calibrating temperature-monitoring algorithms during ablative therapy. Resulting curves of the propagation speed vs. temperature for these tissues can be divided into three regions. In the 25-40 degrees C range, the speed of sound increase rapidly with temperature. It increases moderately with temperature in the 40-70 degrees C range, and it then decreases with increasing temperature from 70-95 degrees C. Attenuation coefficient behavior with temperature is different for the various tissues. For liver, the attenuation coefficient is nearly constant with temperature. For kidney, attenuation increases approximately linearly with temperature, while for muscle and prostate tissue, curves of attenuation vs. temperature are flat in the 25-50 degrees C range, slowly rise at medium temperatures (50-70 degrees C), and level off at higher temperatures (70-90 degrees C). Measurements were also conducted on a distilled degassed water sample and the results closely follow values from the literature.

Animals↗