PubMed Health⌕ Search

Biomedical subjects

Ulrich S Schubert

Publications and source records attributed to Ulrich S Schubert.

At least 19 recordsLinked to original sources
PubMed2006

Water-soluble ionic liquids as novel stabilizers in suspension polymerization reactions: engineering polymer beads.

Aqueous solutions of ionic liquids have been used as novel and environmentally friendly reaction media to synthesize and "control" the size of different cross-linked polymer beads by suspension polymerization reactions. It was found that the investigated ionic liquids can act as novel stabilizing agents of the suspensions as a result of their surface-active properties. The results have demonstrated that the average size of polymer beads can be varied from the macro- to the nanoscale and their surface area can also be "adjusted" by this synthetic approach. Furthermore, the use of a combination of ionic liquids and water for the synthesis of polymers, the simple isolation of the products formed in this polymerization procedure, as well as the recycling of the continuous medium for further reactions open up possibilities for the development of "new and green" polymerization processes.

Ions↗
PubMed2006

Langmuir and Langmuir-Blodgett films of poly(ethylene oxide)-b-poly(epsilon-caprolactone) star-shaped block copolymers.

Self-assembly of poly(ethylene oxide)-block-poly(epsilon-caprolactone) five-arm stars (PEO-b-PCL) was studied at the air/water (A/W) interface. The block copolymers consist of a hydrophilic PEO core with hydrophobic PCL chains at the star periphery. All the polymers have the same number of ethylene oxide repeat units (9 per arm), and the number of epsilon-caprolactone repeat units ranges from 0 to 18 per arm. The Langmuir monolayers were analyzed by surface pressure/mean molecular area isotherms, compression-expansion hysteresis experiments, and isobaric relaxation measurements, and the Langmuir-Blodgett (LB) films' morphologies were investigated by atomic force microscopy (AFM). PCL homopolymers crystallize directly at the A/W interface in a narrow surface pressure range (11-15 mN/m). In the same pressure region, the star-shaped block copolymers undergo a phase transition corresponding to the collapse and the crystallization of the PCL chains as shown by the presence of a pseudoplateau in the isotherms. The LB films were prepared by transferring the Langmuir monolayers onto mica substrates at various surface pressures. AFM imaging confirmed the formation of PCL crystals in the LB monolayers of the PCL homopolymers and of the copolymers, but also showed that the PCL segments can undergo additional crystallization after monolayer transfer during water evaporation. The PCL crystal morphologies were also strongly influenced by the surface pressure and by the PEO segments.

Ethylene Oxide↗
PubMed2006

Fast and "green" living cationic ring opening polymerization of 2-ethyl-2-oxazoline in ionic liquids under microwave irradiation.

The living cationic ring opening polymerization of 2-ethyl-2-oxazoline performed in an ionic liquid under microwave irradiation showed an enhanced polymerization rate in comparison to the reaction in common organic solvents; the ionic liquid was efficiently recovered and reused in new reaction cycles, completely avoiding the use of organic volatile compounds.

Journal Article↗
PubMed2006

Tuning the hydrophilicity of gold nanoparticles templated in star block copolymers.

We report on a simple procedure to tune the hydrophilicity of hybrid gold nanoparticles. The nanoparticles have been prepared in the core of a poly(ethylene glycol)-block-poly(epsilon-caprolactone) (PEG-b-PCL) five-arm star block copolymer. A hydrophilic corona was then added to these hybrid gold nanoparticles by direct chemisorption of trithiocarbonate-containing poly(acrylic acid) chains. These polymers were synthesized by RAFT polymerization with a trithiocarbonate as the chain-transfer agent. The efficiency of the grafting was evidenced by TEM, AFM, and DLS and by the successful transfer of these nanoparticles from organic solvent to water.

Acrylic Resins↗
PubMed2006

Microwave-assisted synthesis of 3,6-di(pyridin-2-yl)pyridazines: unexpected ketone and aldehyde cycloadditions.

3,6-Di(pyridin-2-yl)pyridazines are an interesting class of compounds because of their metal-coordinating ability resulting in the self-assembly into [2x2] gridlike metal complexes with copper(I) or silver(I) ions. These and other substituted pyridazines can be prepared by the inverse-electron-demand Diels-Alder reactions between acetylenes and 1,2,4,5-tetrazines. In this contribution, the effect of (superheated) microwave conditions on these generally slow cycloadditions is described. The cycloaddition of acetylenes to 3,6-di(pyridin-2-yl)-1,2,4,5-tetrazine could be accelerated from several days reflux in toluene or N,N-dimethylformamide to several hours in dichloromethane at 150 degrees C. In addition, the unexpected cycloaddition of the enol tautomers of various ketones and aldehydes to 3,6-di(pyridin-2-yl)-1,2,4,5-tetrazine is described in detail providing an alternative route for the synthesis of (substituted) pyridazines.

Journal Article↗
PubMed2006

Solvent-induced morphological transition in core-cross-linked block copolymer micelles.

Microwave-assisted polymerization has been utilized to synthesize amphiphilic poly(2-ethyl-2-oxazoline-block-2-"soy alkyl"-2-oxazoline) diblock copolymers (PEtOx-PSoyOx). The amphiphilic block copolymers have been used to prepare aqueous spherical micelles consisting of a PEtOx corona and a PSoyOx core, which have been further cross-linked by UV irradiation. The morphology of these cross-linked micelles has been shown to reversibly change from spheres to short rods referred to as rice grains whenever the micelles were transferred from water into acetone, a nonselective solvent for the constituent blocks. This morphological transition has been attributed to the swelling of the slightly cross-linked PSoyOx core.

Journal Article↗
PubMed2006

The use of (metallo-)supramolecular initiators for living/controlled polymerization techniques.

The introduction of supramolecular interactions in synthetic polymers seems to be a promising approach towards novel 'smart' materials that combine both the (reversible) supramolecular interactions and the properties of the polymers. In this tutorial review, the use of (metallo-)supramolecular initiators for the preparation of end-functionalized (metallo-)supramolecular polymers will be discussed in detail. The different polymerization techniques that have been applied as well as the different ligands and metal complexes that were used to initiate these polymerizations will be discussed together with the resulting polymer properties.

Molecular Structure↗
PubMed2005

Light-emitting iridium(III) and ruthenium(II) polypyridyl complexes containing quadruple hydrogen-bonding moieties.

A novel compound containing both a 2,2'-bipyridine as well as a 2-ureido-4[1H]-ureidopyrimidinone supramolecular moiety (3) has been synthesised and fully characterized by 1H-NMR, MALDI-TOFMS, UV-vis and IR spectroscopy. Subsequent coordination to iridium and ruthenium polypyridyl precursors allowed the formation of iridium(III) and ruthenium(II) polypyridyl dimers (5 and 7) assembled via quadruple hydrogen-bonding as well as metal coordination interactions. The syntheses and complete characterization of these materials by means of two-dimensional NMR techniques (1H-1H COSY and 1H-1H DOSY) as well as IR and MALDI-TOFMS are described in detail. Comparative studies of the optical properties of the luminescent model complexes (5' and '7) and the dimer species (5 and 7) are also illustrated. In addition, good processability of the materials has been demonstrated by inkjet printing leading to thin films revealing their potential for light-emitting devices.

2,2'-Dipyridyl↗
PubMed2005

Oligonucleotide-protamine-albumin nanoparticles: Protamine sulfate causes drastic size reduction.

Nanoparticles prepared by self-assembly from oligonucleotides (ONs), protamine free base, and human serum albumin ("ternary proticles") are spheres of diameters around 200 nm. Substitution of the protamine free base by protamine sulfate leads to proticles of only around 40 nm in diameter with otherwise unchanged properties. The availability of drug delivery systems of very similar composition but grossly different size may be advantageous when dealing with cells which show size-dependent particle uptake. These nanoparticles are promising candidates for ON delivery to cells because of the following reasons: (1) They are stable for several hours in solutions of up to physiological ionic strength; (2) they are efficiently taken up by cells; (3) after cellular uptake, they easily release the ONs even when these are present as phosphorothioates.

Animals↗
PubMed2005

Star-block copolymers as templates for the preparation of stable gold nanoparticles.

Gold nanoparticles of improved stability against aggregation were prepared using poly(ethylene oxide)-block-poly(epsilon-caprolactone) (PEO-b-PCL) star-block copolymers. A five-arm star-shaped macroinitiator (PEO) was utilized for the automated parallel controlled ring-opening polymerization of epsilon-caprolactone to prepare a series of PEO-b-PCL star-block copolymers with a constant PEO core linked to PCL blocks of variable length. The PEO core was swelled with KAuCl4 in N,N-dimethylformamide (DMF), and gold nanoparticles were subsequently obtained by reduction with NaBH4. Since the process was always templated by the same PEO core for all investigated polymers, the average dimension of the formed gold nanoparticles was in the same range for all star-block copolymers. In sharp contrast, the size distribution and long-term stability against aggregation of the gold nanoparticles dispersed in DMF were strongly dependent on the PCL block length, confirming the role of PCL blocks as stabilizing blocks for these nanoparticles.

Journal Article↗
PubMed2005

Combination of orthogonal supramolecular interactions in polymeric architectures.

Supramolecular polymers represent a highly interesting approach towards new "smart materials". A recent strategy includes the combination of different "orthogonal" non-covalent binding sites within one polymer system. Different functionalities can be introduced in a highly defined way by controlled self-assembly processes. This feature article presents highlights in the supramolecular polymer chemistry of multiple hydrogen-bonding, metal complexation (especially of bi- and terpyridines) and host-guest interactions as well as recent advances in combining these interactions in novel polymers.

Journal Article↗
PubMed2005

High molecular weight supramolecular polymers containing both terpyridine metal complexes and ureidopyrimidinone quadruple hydrogen-bonding units in the main chain.

Using a hydroxy-functionalized terpyridine as initiator, a poly(epsilon-caprolactone) containing one terpyridine endgroup was prepared by tin octanoate-catalyzed controlled ring-opening polymerization. The omega-hydroxy group of this polymer was subsequently reacted with an isocyanato-ureidopyrimidinone, resulting for the first time in polymers bearing a metal-coordinating ligand on the one and a hydrogen-bonding unit on the other chain end. Hydrogen-bonded supramolecular dimers were shown to be present in chloroform solution. The subsequent addition of iron(II) ions resulted in the formation of high molecular weight supramolecular polymers with novel properties resulting from the combination of both types of noncovalent interactions in the main chain, as could be shown using capillary viscosimetry and rheometry.

Journal Article↗
PubMed2005

Oligonucleotide-protamine-albumin nanoparticles: preparation, physical properties, and intracellular distribution.

Oligodesoxynucleotides (ODNs) or the corresponding phosphorothioates (PTOs) spontaneously form spherical nanoparticles ("proticles") with protamine in aqueous solutions. The proticles can cross cellular membranes and release the ODNs within the cells. Thus, they represent a potential drug delivery system. The major disadvantages of this system are a lack of stability in salt solutions and its inability to also release PTOs. The present study shows, using PTOs and protamine free base, that these shortcomings can be eliminated by the addition of human serum albumin (HSA) as a third component to the starting mixture. The "ternary" proticles thus obtained contain maximally a few percent of the HSA that was originally present. Nevertheless, they differ from the previously studied "binary" proticles: (1) They are stable in salt solutions for at least several hours. (2) They show a high cellular uptake into murine fibroblasts, and they readily release the PTOs after uptake. The ternary proticles therefore represent a considerable improvement over binary proticles for use as drug delivery systems.

Albumins↗