PubMed Health⌕ Search

Biomedical subjects

Uno Carlsson

Publications and source records attributed to Uno Carlsson.

16 recordsLinked to original sources

Inhibitors of factor VIIa affect the interface between the protease domain and tissue factor.

Blood coagulation is triggered by the formation of a complex between factor VIIa (FVIIa) and its cofactor, tissue factor (TF). The gamma-carboxyglutamic acid-rich domain of FVIIa docks with the C-terminal domain of TF, the EGF1 domain of FVIIa contacts both domains of TF, and the EGF2 domain and protease domain (PD) form a continuous surface that sits on the N-terminal domain of TF. Our aim was to investigate the conformational changes that occur in the sTF.PD binding region when different types of inhibitors, i.e., one active-site inhibitor (FFR-chloromethyl ketone (FFR)), two different peptide exosite inhibitors (E-76 and A-183), and the natural inhibitor tissue factor pathway inhibitor (TFPI), were allowed to bind to FVIIa. For this purpose, we constructed two sTF mutants (Q37C and E91C). By the aid of site-directed labeling technique, a fluorescent label was attached to the free cysteine. The sTF.PD interface was affected in position 37 by the binding of FFR, TFPI, and E-76, i.e., a more compact structure was sensed by the probe, while for position 91 located in the same region no change in the surrounding structure was observed. Thus, the active site inhibitors FFR and TFPI, and the exosite inhibitor E-76 have similar effects on the probe in position 37 of sTF, despite their differences in size and inhibition mechanism. The allosteric changes at the active site caused by binding of the exosite inhibitor E-76 in turn induce similar conformational changes in the sTF.PD interface as does the binding of the active site inhibitors. A-183, on the other hand, did not affect position 37 in sTF, indicating that the A-183 inhibition mechanism is different from that of E-76.

Binding Sites↗

Autocrine production of biologically active hepatocyte growth factor (HGF) by injured human skin.

BACKGROUND: Hepatocyte growth factor (HGF) is a potent regenerative factor involved in wound healing. Previous studies have shown that mesenchymal cells produce HGF, stimulating epithelial cells in a paracrine fashion. OBJECTIVE: To examine whether autocrine HGF production by keratinocytes can occur upon skin injury. METHODS: A 31-year-old male patient sustained a burn affecting 80% of his total body surface area. Biopsies were taken from intact skin near the injured area, and skin keratinocytes were separated and cultured. Conditioned medium from keratinocytes was analyzed for HGF by ELISA, surface plasmon resonance (SPR), and dot blotting. Binding of HGF from conditioned medium to its receptor, c-Met, was compared with recombinant HGF by SPR. Finally, we examined the motogenic effect on mouse transformed skin epithelial cells (CCL-53.1) of HGF from conditioned medium. RESULTS: HGF was detected in the cultured keratinocyte medium. Similar to recombinant HGF, HGF from conditioned medium had a high affinity for dextran sulfate and albumin, and the same epitopes were engaged by the interaction of HGF with the c-Met receptor. The conditioned medium from keratinocytes obtained from the burn patient, but not medium from keratinocytes obtained from healthy volunteers, accelerated the motogenesis of CCL-53.1 cells. Unexpectedly, anti-HGF antibodies did not prevent this effect. However, anti-c-Met antibodies completely inhibited the motogenic effect. CONCLUSION: Upon injury, human skin keratinocytes might produce biologically active HGF in an autocrine fashion. This HGF might have different structural and/or biological properties from HGF produced by mesenchymal cells.

Adult↗

Sequential coagulation factor VIIa domain binding to tissue factor.

Vessel wall tissue factor (TF) is exposed to blood upon vascular damage which enables association with factor VIIa (FVIIa). This leads to initiation of the blood coagulation cascade through localization and allosteric induction of FVIIa procoagulant activity. To examine the docking pathway of the FVIIa-TF complex, various residues in the extracellular part of TF (sTF) that are known to interact with FVIIa were replaced with cysteines labelled with a fluorescent probe. By using stopped-flow fluorescence kinetic measurements in combination with surface plasmon resonance analysis, we studied the association of the resulting sTF variants with FVIIa. We found the docking trajectory to be a sequence of events in which the protease domain of FVIIa initiates contact with sTF. Thereafter, the two proteins are tethered via the first epidermal growth factor-like and finally the gamma-carboxyglutamic acid (Gla) domain. The two labelled sTF residues interacting with the protease domain of FVIIa bind or become eventually ordered at different rates, revealing kinetic details pertinent to the allosteric activation of FVIIa by sTF. Moreover, when the Gla domain of FVIIa is removed the difference in the rate of association for the remaining domains is much more pronounced.

Factor VIIa↗

Activity, folding, misfolding, and aggregation in vitro of the naturally occurring human tissue factor mutant R200W.

Tissue factor (TF), a small transmembrane receptor, binds factor VIIa (FVIIa), and the formed complex initiates blood coagulation by proteolytic activation of substrate factors IX and X. A naturally occurring mutation in the human TF gene was recently reported, where a single-base substitution results in an R200W mutation in the TF extracellular domain [Zawadzki, C., Preudhomme, C., Gaveriaux, V., Amouyel, P., and Jude, B. (2002) Thromb. Haemost. 87, 540-541]. This mutation appears to be associated with low monocyte TF expression and may protect against thrombosis but has not been associated with any pathological condition, and individuals who present the heterozygous trait appear healthy. Here, we report the activity, folding, and aggregation behavior of the R200W mutant of the 219-residue soluble extracellular domain of TF (sTF(R200W)) compared to that of the wild-type protein (sTF(wt)). No differences in stability or FVIIa cofactor activity but an impaired ability to promote FX activation at physiological conditions between the sTF(R200W) mutant and sTF(wt) were evident. Increased binding of 1-anilino-8-naphthalene-sulfonic acid (ANS) to sTF(R200W) indicated a population of partially folded intermediates during denaturation. sTF(R200W) showed a dramatically increased propensity for aggregate formation compared to sTF(wt) at mildly acidic pHs, with an increased rate of aggregation during conditions, promoting the intermediate state. The lowered pH resistance could explain the loss of sTF(R200W) in vivo because of aggregation of the mutant. The intrinsic structure of the sTF aggregates appears reminiscent of amyloid fibrils, as revealed by thioflavin T fluorescence, atomic force microscopy, and transmission electron microscopy. We conclude that the lowered activity for FX activation and the propensity of the mutant protein to misfold and aggregate will both contribute to decreased coagulation activity in TF(R200W) carriers, which could protect from thrombotic disease.

Amyloid↗

Reduction of irreversible protein adsorption on solid surfaces by protein engineering for increased stability.

The influence of protein stability on the adsorption and desorption behavior to surfaces with fundamentally different properties (negatively charged, positively charged, hydrophilic, and hydrophobic) was examined by surface plasmon resonance measurements. Three engineered variants of human carbonic anhydrase II were used that have unchanged surface properties but large differences in stability. The orientation and conformational state of the adsorbed protein could be elucidated by taking all of the following properties of the protein variants into account: stability, unfolding, adsorption, and desorption behavior. Regardless of the nature of the surface, there were correlation between (i) the protein stability and kinetics of adsorption, with an increased amplitude of the first kinetic phase of adsorption with increasing stability; (ii) the protein stability and the extent of maximally adsorbed protein to the actual surface, with an increased amount of adsorbed protein with increasing stability; (iii) the protein stability and the amount of protein desorbed upon washing with buffer, with an increased elutability of the adsorbed protein with increased stability. All of the above correlations could be explained by the rate of denaturation and the conformational state of the adsorbed protein. In conclusion, protein engineering for increased stability can be used as a strategy to decrease irreversible adsorption on surfaces at a liquid-solid interface.

Adsorption↗

Denaturant-assisted formation of a stabilizing disulfide bridge from engineered cysteines in nonideal conformations.

The engineered disulfide bridge A23C/L203C in human carbonic anhydrase II, inserted from homology modeling of Neisseria gonorrhoeae carbonic anhydrase, significantly stabilizes the native state of the protein. The inserted cysteine residues are placed in the interior of the structure, and because of the conformationally restrained localization, the protein is expressed in the reduced state and the cysteines are not readily oxidized. However, upon exposure to low concentrations of denaturant (0.6 M guanidine hydrochloride), corresponding to the lower part of the denaturation curve for the first unfolding transition, the oxidation rate of correctly formed disulfide bridges was markedly increased. By entropy estimations it appears that the increased flexibility, induced by the denaturant, enables the cysteines to find each other and hence to form the disulfide bridge. The outlined strategy of facilitating formation of disulfide bonds by addition of adjusted concentrations of a denaturant should be applicable to other proteins in which engineered cysteine residues are located in nonideal conformations. Moreover, a S99C/V242C variant was constructed, in which the cysteine residues are located on the surface. In this mutant the disulfide bridge was spontaneously formed and the native state was considerably stabilized (midpoint concentration of unfolding was increased from 1.0 to 1.4 M guanidine hydrochloride).

Alanine↗

Protein adsorption orientation in the light of fluorescent probes: mapping of the interaction between site-directly labeled human carbonic anhydrase II and silica nanoparticles.

Little is known about the direction and specificity of protein adsorption to solid surfaces, a knowledge that is of great importance in many biotechnological applications. To resolve the direction in which a protein with known structure and surface potentials binds to negatively charged silica nanoparticles, fluorescent probes were attached to different areas on the surface of the protein human carbonic anhydrase II. By this approach it was clearly demonstrated that the adsorption of the native protein is specific to limited regions at the surface of the N-terminal domain of the protein. Furthermore, the adsorption direction is strongly pH-dependent. At pH 6.3, a histidine-rich area around position 10 is the dominating adsorption region. At higher pH values, when the histidines in this area are deprotonated, the protein is also adsorbed by a region close to position 37, which contains several lysines and arginines. Clearly the adsorption is directed by positively charged areas on the protein surface toward the negatively charged silica surface at conditions when specific binding occurs.

Acrylamide↗

Transition state analysis of the complex between coagulation factor VIIa and tissue factor: suggesting a sequential domain-binding pathway.

Injury of a blood vessel exposes membrane-bound tissue factor (TF) to blood, which allows binding of coagulation factor VIIa (FVIIa). This initiation of the coagulation cascade is dictated by a specific multi-domain interaction between FVIIa and TF. To examine the energies involved in the transition state of the FVIIa:TF complex, various residues in the extracellular part of TF (sTF) that are known to interact with FVIIa were replaced with a smaller cysteine residue. Determination of Phi values in each of the positions using surface plasmon resonance measurements enabled us to characterize the transition state complex between the resulting sTF variants and FVIIa. We found that the interactions in the transition state seemed to be most pronounced between the protease domain of FVIIa and sTF while detailed specific interactions between the Gla-domain and sTF were missing. Thus, the transition state energy data indicate a sequential binding event between these two macromolecules.

Blood Coagulation↗

Unfolding a folding disease: folding, misfolding and aggregation of the marble brain syndrome-associated mutant H107Y of human carbonic anhydrase II.

Most loss-of-function diseases are caused by aberrant folding of important proteins. These proteins often misfold due to mutations. The disease marble brain syndrome (MBS), known also as carbonic anhydrase II deficiency syndrome (CADS), can manifest in carriers of point mutations in the human carbonic anhydrase II (HCA II) gene. One mutation associated with MBS entails the His107Tyr substitution. Here, we demonstrate that this mutation is a remarkably destabilizing folding mutation. The loss-of-function is clearly a folding defect, since the mutant shows 64% of CO(2) hydration activity compared to that of the wild-type at low temperature where the mutant is folded. On the contrary, its stability towards thermal and guanidine hydrochloride (GuHCl) denaturation is highly compromised. Using activity assays, CD, fluorescence, NMR, cross-linking, aggregation measurements and molecular modeling, we have mapped the properties of this remarkable mutant. Loss of enzymatic activity had a midpoint temperature of denaturation (T(m)) of 16 degrees C for the mutant compared to 55 degrees C for the wild-type protein. GuHCl-denaturation (at 4 degrees C) showed that the native state of the mutant was destabilized by 9.2kcal/mol. The mutant unfolds through at least two equilibrium intermediates; one novel intermediate that we have termed the molten globule light state and, after further denaturation, the classical molten globule state is populated. Under physiological conditions (neutral pH; 37 degrees C), the His107Tyr mutant will populate the molten globule light state, likely due to novel interactions between Tyr107 and the surroundings of the critical residue Ser29 that destabilize the native conformation. This intermediate binds the hydrophobic dye 8-anilino-1-naphthalene sulfonic acid (ANS) but not as strong as the molten globule state, and near-UV CD reveals the presence of significant tertiary structure. Notably, this intermediate is not as prone to aggregation as the classical molten globule. As a proof of concept for an intervention strategy with small molecules, we showed that binding of the CA inhibitor acetazolamide increases the stability of the native state of the mutant by 2.9kcal/mol in accordance with its strong affinity. Acetazolamide shifts the T(m) to 34 degrees C that protects from misfolding and will enable a substantial fraction of the enzyme pool to survive physiological conditions.

Amino Acid Substitution↗

Circumnavigating misfolding traps in the energy landscape through protein engineering: suppression of molten globule and aggregation in carbonic anhydrase.

The native state of the enzyme human carbonic anhydrase (HCA II) has been stabilized by the introduction of a disulfide bond, the oxidized A23C/L203C mutant. This stabilized protein variant undergoes an apparent two-state unfolding process with suppression of the otherwise stable equilibrium, molten-globule intermediate, which is normally very prone to aggregation. Stopped-flow measurements also showed that lower amounts of the transiently occurring molten globule were formed during refolding. This led to a markedly lowered tendency for aggregation during equilibrium denaturing conditions and, more importantly, to significantly higher reactivation yields upon refolding of the fully denatured protein. Thus, a general strategy to circumvent aggregation during the refolding of proteins could be to stabilize the native state of a protein at the expense of partially folded intermediates, thereby shifting the unfolding behavior from a three-state process to a two-state one.

Carbonic Anhydrases↗

Reshaping the folding energy landscape by chloride salt: impact on molten-globule formation and aggregation behavior of carbonic anhydrase.

During chemical denaturation different intermediate states are populated or suppressed due to the nature of the denaturant used. Chemical denaturation by guanidine-HCl (GuHCl) of human carbonic anhydrase II (HCA II) leads to a three-state unfolding process (Cm,NI=1.0 and Cm,IU=1.9 M GuHCl) with formation of an equilibrium molten-globule intermediate that is stable at moderate concentrations of the denaturant (1-2 M) with a maximum at 1.5 M GuHCl. On the contrary, urea denaturation gives rise to an apparent two-state unfolding transition (Cm=4.4 M urea). However, 8-anilino-1-naphthalene sulfonate (ANS) binding and decreased refolding capacity revealed the presence of the molten globule in the middle of the unfolding transition zone, although to a lesser extent than in GuHCl. Cross-linking studies showed the formation of moderate oligomer sized (300 kDa) and large soluble aggregates (>1000 kDa). Inclusion of 1.5 M NaCl to the urea denaturant to mimic the ionic character of GuHCl leads to a three-state unfolding behavior (Cm,NI=3.0 and Cm,IU=6.4 M urea) with a significantly stabilized molten-globule intermediate by the chloride salt. Comparisons between NaCl and LiCl of the impact on the stability of the various states of HCA II in urea showed that the effects followed what could be expected from the Hofmeister series, where Li+ is a chaotropic ion leading to decreased stability of the native state. Salt addition to the completely urea unfolded HCA II also led to an aggregation prone unfolded state, that has not been observed before for carbonic anhydrase. Refolding from this state only provided low recoveries of native enzyme.

Anilino Naphthalenesulfonates↗

The cyclooxygenase-2 inhibitor celecoxib is a potent inhibitor of human carbonic anhydrase II.

Cyclooxygenase-2 (COX-2) is up-regulated in stromal and inflammatory cells. The inducible COX-2 isoform is expressed during inflammation, in some cancers, and in brain tissue after global and focal ischemia. Tissue acidosis is a dominant factor in inflammation, and contributes to pain and hyperalgesia. Recently, compelling epidemiological and clinical evidence has documented the COX-independent effects of some COX-2 inhibitors (i.e., celecoxib, valdecoxib, and rofecoxib); among these effects are carbonic anhydrase (CA) inhibition. Carbonic anhydrases are zinc metalloenzymes expressed in various cell types, including those of the kidney, where they act as general acid-base catalysts. The kidneys are also known to express the highest concentration of COX-2 messenger ribonucleic acid. Celecoxib, like the prototypic CA inhibitor acetazolamide, is structurally characterized by an unsubstituted sulfonamide moiety. In the present study, we report that celecoxib exhibits the characteristics of a potent CA inhibitor, showing inhibitory human carbonic anhydrase II (hCAII) activity in the nanomolar range. Valdecoxib was relatively less potent. Rofecoxib, which lacks the unsubstituted sulfonamide moiety characteristic of CA inhibitors, showed no significant hCAII inhibitory activity. The current study corroborates our earlier report of structure-activity relationships as predictors of such metabolic events as hyperchloremia, acidosis, and changes in calcium and phosphate disposition; and clinical manifestations associated with CA inhibition reported with celecoxib. These data showing inhibition of hCAII by the unsubstituted sulfonamides celecoxib and valdecoxib, but not by rofecoxib, may have important implications for the elucidation of the mechanisms of action as well as the side effects associated with COX-2 inhibitors.

Acetazolamide↗

Site-directed fluorescence probing to dissect the calcium-dependent association between soluble tissue factor and factor VIIa domains.

We have used the site-directed labeling approach to study the Ca(2+)-dependent docking of factor VIIa (FVIIa) to soluble tissue factor (sTF). Nine Ca(2+) binding sites are located in FVIIa and even though their contribution to the overall binding between TF and FVIIa has been thoroughly studied, their importance for local protein-protein interactions within the complex has not been determined. Specifically we have monitored the association of the gamma-carboxyglutamic acid (Gla), the first EGF-like (EGF1), and the protease domains (PD) of FVIIa to sTF. Our results revealed that complex formation between sTF and FVIIa during Ca(2+) titration is initiated upon Ca(2+) binding to EGF1, the domain containing the site of highest Ca(2+) affinity. Besides we showed that a Ca(2+)-loaded Gla domain is required for an optimal association of all domains of FVIIa to sTF. Ca(2+) binding to the PD seems to be of some importance for the docking of this domain to sTF.

Calcium↗

Probing the interface between factor Xa and tissue factor in the quaternary complex tissue factor-factor VIIa-factor Xa-tissue factor pathway inhibitor.

Blood coagulation is triggered by the formation of a complex between factor VIIa (FVIIa) and its cofactor, tissue factor (TF). TF-FVIIa is inhibited by tissue factor pathway inhibitor (TFPI) in two steps: first TFPI is bound to the active site of factor Xa (FXa), and subsequently FXa-TFPI exerts feedback inhibition of TF-FVIIa. The FXa-dependent inhibition of TF-FVIIa activity by TFPI leads to formation of the quaternary complex TF-FVIIa-FXa-TFPI. We used site-directed fluorescence probing to map part of the region of soluble TF (sTF) that interacts with FXa in sTF-FVIIa-FXa-TFPI. We found that the C-terminal region of sTF, including positions 163, 166, 200 and 201, is involved in binding to FXa in the complex, and FXa, most likely via its Gla domain, is also in contact with the Gla domain of FVIIa in this part of the binding region. Furthermore, a region that includes the N-terminal part of the TF2 domain and the C-terminal part of the TF1 domain, i.e. the residues 104 and 197, participates in the interaction with FXa in the quaternary complex. Moreover, comparisons of the interaction areas between sTF and FX(a) in the quaternary complex sTF-FVIIa-FXa-TFPI and in the ternary complexes sTF-FVII-FXa or sTF-FVIIa-FX demonstrated large similarities.

Amino Acid Substitution↗

Dramatic stabilization of the native state of human carbonic anhydrase II by an engineered disulfide bond.

To find a disulfide pair that could stabilize the enzyme human carbonic anhydrase II (HCA II), we grafted the disulfide bridge from the related and unusually stable carbonic anhydrase form from Neisseria gonorrhoeae (NGCA) into the human enzyme. Thus, the two Cys residues at positions 23 and 203 were engineered into a pseudo-wild-type form of HCA II (C206S), giving the mutant C206S/A23C/L203C. The disulfide bond was not formed spontaneously. The native state of the reduced form of the mutant was markedly destabilized (2.9 kcal/mol) compared to that of HCA II. Formation of a disulfide bridge was achieved by treatment by oxidized glutathione. This led to a significant stabilization of the native conformation. Compared to HCA II the unfolding midpoint for the variant was increased from 0.9 to 1.7 M guanidine HCl, corresponding to a stabilization of 3.7 kcal/mol. This makes the human enzyme almost as stable as the model protein NGCA, for which the unfolding of the native state has a midpoint at 2.1 M guanidine HCl. The stabilized protein underwent, contrary to all other investigated variants of HCA II, an apparent two-state unfolding transition, as judged from intrinsic Trp fluorescence measurements. A molten-globule intermediate is nevertheless formed but is suppressed because of the high denaturant pressure it faces upon rupture of the native state.

Alanine↗

The importance of being knotted: effects of the C-terminal knot structure on enzymatic and mechanical properties of bovine carbonic anhydrase II.

In order to better understand the contribution of the knotted folding pattern to the enzymatic and mechanical properties of carbonic anhydrases, we replaced Gln-253 of bovine carbonic anhydrase II with Cys, which allowed us to measure the mechanical strength of the protein against tensile deformation by avoiding knot tightening. The expressed protein, to our surprise, turned out to contain two conformational isomers, one capable of binding an enzymatic inhibitor and the other not, which led to their separation through affinity chromatography. In near- and far-UV circular dichroism and fluorescence spectra, the separated conformers were very similar to each other and to the wild-type enzyme, indicating that they both had native-like conformations. We describe new evidence which supports the notion that the difference between the two conformers is likely to be related to the completeness of the C-terminal knot formation.

Amino Acid Substitution↗