Biomedical subjects

Uriel Levy

Publications and source records attributed to Uriel Levy.

8 recordsLinked to original sources

PubMed2006

Form-birefringent space-variant inhomogeneous medium element for shaping point-spread functions.

We experimentally characterize the properties of an element that generates a doughnutlike point-spread function by converting the linearly polarized incident field to radially or azimuthally polarized light utilizing space-variant inhomogeneous medium (SVIM) form-birefringent subwavelength structures. To fabricate the high-aspect-ratio SVIM structures, we developed a chemically assisted ion-beam-etching process that permits control of the fabricated form-birefringent structure profile to optimize the effect of birefringence and the impedance mismatch on the substrate-air interface. Fabricated elements perform efficient polarization conversion for incident angles as large as 30 degrees, where the extinction ratio is found to be better than 4.5. The intensity distribution in the far field shows that our SVIM device generates a doughnut point-spread function that may prove useful for various applications.

Journal Article↗

PubMed2005

Near-infrared demonstration of computer-generated holograms implemented by using subwavelength gratings with space-variant orientation.

We provide an experimental demonstration of novel form-birefringent computer-generated holograms at wavelengths of 1.55 and 10.6 microm. These novel devices utilize a 2-D array of cells that can be fabricated with a single lithographic step. Each cell contains a subwavelength binary grating whose orientation controls the desired continuous phase profile within the cell.

Journal Article↗

PubMed2005

Analysis of longitudinal-field reflection in dielectric gratings.

Because of a common approximation used in the derivation of the wave equation, conventional analyses of Bragg reflection from dielectric gratings do not account for the distinctive behavior of the longitudinal field component of the electric field. We address this issue, which has particular significance in subwavelength scale periodic dielectric structures. We discuss new reflection phenomena within the theoretical framework of coupled-wave analysis, supplemented with numerical calculations.

Journal Article↗

PubMed2005

Form-birefringence structure fabrication in GaAs by use of SU-8 as a dry-etching mask.

A thin layer of a SU-8 submicrometer pattern produced by holographic lithography was directly used as the dry-etching mask in a chemically assisted ion-beam-etching system. With optimized etching parameters, etching selectivity of 7:1 was achieved together with a smooth vertical profile. As an application, a half-wavelength retardation plate for a 1.55-microm wavelength was produced and evaluated.

Journal Article↗

PubMed2005

Implementation of a graded-index medium by use of subwavelength structures with graded fill factor.

We present a novel configuration for the implementation of subwavelength-based graded-index devices. The proposed concept is based on the etching of one-dimensional subwavelength gratings into a high-index slab waveguide to achieve the desired effective index distribution. A graded-index profile can be achieved by gradually modifying the duty ratio of the grating along the horizontal axis, while the beam is confined in the vertical direction by the slab waveguide. On the basis of this concept, novel graded-index lenses and waveguides are both proposed and characterized numerically by use of finite-difference time-domain and finite-element analysis. The proposed devices can be used for guiding, imaging, optical signal processing, mode matching, coupling, and other applications while offering the intrinsic advantages of on-chip integration such as miniaturization, eliminating the need to align each component separately, and compatibility with standard microfabrication techniques for manufacturability.

Journal Article↗

PubMed2004

Engineering space-variant inhomogeneous media for polarization control.

Novel devices for converting a linear polarization state to radial or azimuthal polarization states are realized by use of space-variant inhomogeneous media on a subwavelength scale. The two designs presented use form birefringence to locally transform the polarization state. The devices are fabricated in a GaAs substrate for operation in the far-infrared wavelength range. The experimental characterization is in good agreement with the designs, demonstrating high conversion efficiency.

Journal Article↗

PubMed2004

Dispersion properties of inhomogeneous nanostructures.

We analyze the dispersive properties of inhomogeneous nanostructures (INSs) composed of alternating layers of different materials. Analysis of the interaction between the propagating pulse and the INS provides modified dispersion characteristics. An approximate theoretical model predicting the dispersion properties of the INS is developed and compared with more accurate numeric computation results. It is shown that the dispersion coefficient can be engineered by controlling the spatial distribution of the pulse carrier, the geometry of the INS, and the refractive indices of the materials combined to construct the INS. Specifically, the dispersion coefficient can be engineered to yield various types of dispersion, including normal dispersion, anomalous dispersion, and zero dispersion. As such, the discussed INS can be useful for applications that will benefit from engineered dispersion management and control.

Journal Article↗

PubMed2003

Optical transfer function shaping and depth of focus by using a phase only filter.

The design of a desired optical transfer function (OTF) is a common problem that has many possible applications. A well-known application for OTF design is beam shaping for incoherent illumination. However, other applications such as optical signal processing can also be addressed with this system. We design and realize an optimal phase only filter that, when attached to the imaging lens, enables an optimization (based on the minimal mean square error criterion) to a desired OTF. By combining several OTF design goal requirements, each represents a different plane along the beam propagation direction, an imaging system with an increased depth of focus is obtained. Because a phase only filter is used, high energetic efficiency is achieved.

Journal Article↗