PubMed Health⌕ Search

Biomedical subjects

V G Eijsink

Publications and source records attributed to V G Eijsink.

At least 19 recordsLinked to original sources

Structural insights into the catalytic mechanism of a family 18 exo-chitinase.

Chitinase B (ChiB) from Serratia marcescens is a family 18 exo-chitinase whose catalytic domain has a TIM-barrel fold with a tunnel-shaped active site. We have solved structures of three ChiB complexes that reveal details of substrate binding, substrate-assisted catalysis, and product displacement. The structure of an inactive ChiB mutant (E144Q) complexed with a pentameric substrate (binding in subsites -2 to +3) shows closure of the "roof" of the active site tunnel. It also shows that the sugar in the -1 position is distorted to a boat conformation, thus providing structural evidence in support of a previously proposed catalytic mechanism. The structures of the active enzyme complexed to allosamidin (an analogue of a proposed reaction intermediate) and of the active enzyme soaked with pentameric substrate show events after cleavage of the glycosidic bond. The latter structure shows reopening of the roof of the active site tunnel and enzyme-assisted product displacement in the +1 and +2 sites, allowing a water molecule to approach the reaction center. Catalysis is accompanied by correlated structural changes in the core of the TIM barrel that involve conserved polar residues whose functions were hitherto unknown. These changes simultaneously contribute to stabilization of the reaction intermediate and alternation of the pKa of the catalytic acid during the catalytic cycle.

Acetylglucosamine↗

The effect of changing the hydrophobic S1' subsite of thermolysin-like proteases on substrate specificity.

The hydrophobic S1' subsite is one of the major determinants of the substrate specificity of thermolysin and related M4 family proteases. In the thermolysin-like protease (TLP) produced by Bacillus stearothermophilus (TLP-ste), the hydrophobic S1' subsite is mainly formed by Phe130, Phe133, Val139 and Leu202. In the present study, we have examined the effects of replacing Leu202 by smaller (Gly, Ala, Val) and larger (Phe, Tyr) hydrophobic residues. The mutational effects showed that the wild-type S1' pocket is optimal for binding leucine side chains. Reduction of the size of residue 202 resulted in a higher efficiency towards substrates with Phe in the P1' position. Rather unexpectedly, the Leu202-->Phe and Leu202-->Tyr mutations, which were expected to decrease the size of the S1' subsite, resulted in a large increase in activity towards dipeptide substrates with Phe in the P1' position. This is probably due to the fact that 202Phe and 202Tyr adopt a second possible rotamer that opens up the subsite compared to Leu202, and also favours interactions with the substrate. To validate these results, we constructed variants of thermolysin with changes in the S1' subsite. Thermolysin and TLP-ste variants with identical S1' subsites were highly similar in terms of their preference for Phe vs. Leu in the P1' position.

Amino Acid Substitution↗

An analysis of bacteriocins produced by lactic acid bacteria isolated from malted barley.

AIMS: The aim of this study was to perform a detailed characterization of bacteriocins produced by lactic acid bacteria (LAB) isolated from malted barley. METHODS AND RESULTS: Bacteriocin activities produced by eight LAB, isolated from various types of malted barley, were purified to homogeneity by ammonium sulphate precipitation, cation exchange, hydrophobic interaction and reverse-phase liquid chromatography. Molecular mass analysis and N-terminal amino acid sequencing of the purified bacteriocins showed that four non-identical Lactobacillus sakei strains produced sakacin P, while four Leuconostoc mesenteroides strains were shown to produce bacteriocins highly similar or identical to leucocin A, leucocin C or mesenterocin Y105. Two of these bacteriocin-producing strains, Lb. sakei 5 and Leuc. mesenteroides 6, were shown to produce more than one bacteriocin. Lactobacillus sakei 5 produced sakacin P as well as two novel bacteriocins, which were termed sakacin 5X and sakacin 5T. The inhibitory spectrum of each purified bacteriocin was analysed and demonstrated that sakacin 5X was capable of inhibiting the widest range of beer spoilage organisms. CONCLUSION: All bacteriocins purified in this study were class II bacteriocins. Two of the bacteriocins have not been described previously in the literature while the remaining purified bacteriocins have been isolated from environments other than malted barley. SIGNIFICANCE AND IMPACT OF THE STUDY: This study represents a thorough analysis of bacteriocin-producing LAB from malt and demonstrates, for the first time, the variety of previously identified and novel inhibitory peptides produced by isolates from this environment. It also highlights the potential of these LAB cultures to be used as biological controlling agents in the brewing industry.

Amino Acid Sequence↗

Multiple variants of the peroxisome proliferator-activated receptor (PPAR) gamma are expressed in the liver of atlantic salmon (Salmo salar).

A full-length cDNA encoding the peroxisome proliferator-activated receptor (PPAR) has for the first time been characterized from a fish species. The Atlantic salmon PPARgamma cDNA of 2528 nucleotides (nt) was amplified from liver mRNA by reverse transcription (RT)-polymerase chain reaction (PCR). The deduced protein of 544 amino acids (aa) shares approximately 47% overall sequence identity with mammalian PPARgamma. The N-terminal A/B region contains a repeated decapeptide motif and shows a low homology with other PPARs. In contrast, the central DNA-binding domain (DBD) and the C-terminal ligand-binding domain (LBD) show a high sequence identity to mammalian and Xenopus PPARgamma. The salmon PPARgamma LBD contains nine additional residues in a flexible loop that might affect ligand binding. Northern blot analysis of salmon liver RNA revealed a prominent transcript of about 1.7 kilo bases (kb), in addition to several mRNA species of about 2.4-2.6kb, which is consistent with the presence of multiple putative polyadenylation sites in the 3' untranslated region (UTR) of the 2528nt long PPARgamma cDNA. Two additional PPARgamma cDNAs of 1719 and 2357nt were then isolated. The 2357nt long transcript encodes full-length PPARgamma and seems to be ubiquitously expressed in salmon, whereas the liver-specific transcript of 1719nt encodes a truncated variant of PPARgamma. The truncated form lacks 39 C-terminal residues including the conserved activation function-2 (AF-2) motif, known to be associated with crucial cofactors. Three-dimensional modelling studies indicated that the C-terminal truncation would result in important alterations of the ligand-binding pocket. The presence of a truncated form with drastic changes in both ligand- and cofactor-binding sites is likely to modulate PPARgamma activity in salmon liver.

Amino Acid Sequence↗

Structure of a two-domain chitotriosidase from Serratia marcescens at 1.9-A resolution.

In this paper, we describe the structure of chitinase B from Serratia marcescens, which consists of a catalytic domain with a TIM-barrel fold and a 49-residue C-terminal chitin-binding domain. This chitinase is the first structure of a bacterial exochitinase, and it represents one of only a few examples of a glycosyl hydrolase structure having interacting catalytic and substrate-binding domains. The chitin-binding domain has exposed aromatic residues that contribute to a 55-A long continuous aromatic stretch extending into the active site. Binding of chitin oligomers is blocked beyond the -3 subsite, which explains why the enzyme has chitotriosidase activity and degrades the chitin chain from the nonreducing end. Comparison of the chitinase B structure with that of chitinase A explains why these enzymes act synergistically in the degradation of chitin.

Acetylglucosamine↗

A gene cluster encoding plantaricin 1.25beta and other bacteriocin-like peptides in Lactobacillus plantarum TMW1.25.

Plantaricin 1.25beta is a thermostable class two bacteriocin produced by Lactobacillus plantarum TMW1.25 isolated from sausage fermentation. It is co-produced with several other bacteriocin-like peptides. Using oligonucleotides derived from previously determined peptide sequences, a 3.8 kb DNA fragment could be amplified. A neighboring 1.8 kb fragment was amplified using ligation-anchored single-specific-primer PCR. Sequencing of the complete 5.6 kb stretch revealed that the structural gene for plantaricin 1.25beta, plnB, was located downstream of another bacteriocin gene, plnC. Seven other open reading frames were detected, including plnK encoding a bacteriocin-like peptide, but not including any putative immunity genes. Interestingly, the gene cluster contained an IS30-like insertion sequence, designated IS125, as well as an ISS1 homolog.

Amino Acid Sequence↗

Functional analysis of promoters involved in quorum sensing-based regulation of bacteriocin production in Lactobacillus.

Bacteriocin production in Lactobacillus sake LTH673 involves at least four operons: a regulatory operon (sppIPKR); two operons encoding bacteriocins and their immunity proteins (sppAiA and orfX); and an operon needed for secretion (sppTE). We show here that the response regulator encoded by sppR in L. sake LTH673, as well as the homologous response regulators encoded by plnC and plnD in Lactobacillus plantarum C11, bind to characteristic repeats found in the -80 to -40 regions of spp operons. The promoters controlling bacteriocin operons are strictly regulated, and their activity is increased more than 1000-fold upon activation. Constitutive expression for the regulatory and transport operons is driven, at least in part, by promoters upstream of the -80 to -40 regions. Peak promoter activity of the regulatory and transporter operons precedes that of the two bacteriocin operons. The results reveal how promoters involved in quorum sensing-based regulation of bacteriocin production in Lactobacillus differ in strength, leakiness and timing of their activity.

Bacteriocins↗

A C-terminal disulfide bridge in pediocin-like bacteriocins renders bacteriocin activity less temperature dependent and is a major determinant of the antimicrobial spectrum.

Several lactic acid bacteria produce so-called pediocin-like bacteriocins that share sequence characteristics, but differ in activity and target cell specificity. The significance of a C-terminal disulfide bridge present in only a few of these bacteriocins was studied by site-directed mutagenesis of pediocin PA-1 (which naturally contains the bridge) and sakacin P (which lacks the bridge). Introduction of the C-terminal bridge into sakacin P broadened the target cell specificity of this bacteriocin, as illustrated by the fact that the mutants were 10 to 20 times more potent than the wild-type toward certain indicator strains, whereas the potency toward other indicator strains remained essentially unchanged. Like pediocin PA-1, disulfide-containing sakacin P mutants had the same potency at 20 and 37 degrees C, whereas wild-type sakacin P was approximately 10 times less potent at 37 degrees C than at 20 degrees C. Reciprocal effects on target cell specificity and the temperature dependence of potency were observed upon studying the effect of removing the C-terminal disulfide bridge from pediocin PA-1 by Cys-->Ser mutations. These results clearly show that a C-terminal disulfide bridge in pediocin-like bacteriocins contributes to widening of the antimicrobial spectrum as well as to higher potency at elevated temperatures. Interestingly, the differences between sakacin P and pediocin PA-1 in terms of the temperature dependency of their activities correlated well with the optimal temperatures for bacteriocin production and growth of the bacteriocin-producing strain.

Amino Acid Sequence↗

Probing the unfolding region in a thermolysin-like protease by site-specific immobilization.

Protein stabilization by immobilization has been proposed to be most effective if the protein is attached to the carrier at that region where unfolding is initiated. To probe this hypothesis, we have studied the effects of site-specific immobilization on the thermal stability of mutants of the thermolysin-like protease from Bacillus stearothermophilus (TLP-ste). This enzyme was chosen because previous studies had revealed which parts of the molecule are likely to be involved in the early steps of thermal unfolding. Cysteine residues were introduced by site-directed mutagenesis into various positions of a cysteine-free variant of TLP-ste. The mutant enzymes were immobilized in a site-specific manner onto Activated Thiol-Sepharose. Two mutants (T56C, S65C) having their cysteine in the proposed unfolding region of TLP-ste showed a 9- and 12-fold increase in half-lives at 75 degrees C due to immobilization. The stabilization by immobilization was even larger (33-fold) for the T56C/S65C double mutant enzyme. In contrast, mutants containing cysteines in other parts of the TLP-ste molecule (N181C, S218C, T299C) showed only small increases in half-lives due to immobilization (maximum 2.5-fold). Thus, the stabilization obtained by immobilization was strongly dependent on the site of attachment. It was largest when TLP-ste was fixed to the carrier through its postulated unfolding region. The concept of the unfolding region may be of general use for the design of strategies to stabilize proteins.

Cysteine↗

Purification and partial amino acid sequence of plantaricin 1.25 alpha and 1.25 beta, two bacteriocins produced by Lactobacillus plantarum TMW1.25.

Two bacteriocins produced by Lactobacillus plantarum TMW1.25 have been purified by a four-step purification procedure, including ammonium sulphate precipitation and cation-exchange chromatography followed by hydrophobic-interaction chromatography on octyl sepharose. The final purification was performed by repeated reversed-phase chromatography steps which yielded two bacteriocin fractions designated plantaricin 1.25 alpha and plantaricin 1.25 beta. The molecular masses of the peptides in these fractions were 5979 and 5203 Da, respectively. Combination of the fractions did not have any synergistic effects on bacteriocin activity, indicating that they each contain a one-peptide bacteriocin. The major peptide in the alpha fraction was blocked at its N-terminus, and a partial sequence (25 residues) could only be obtained after cleavage with CNBr. This sequence did not show clear homologies with known bacteriocins. The beta peptide has been sequenced almost completely and consists, presumably, of 53 residues. This peptide displayed strong homology to the known N-terminal part of brevicin 27 produced by Lactobacillus brevis SB27. The results showed that the beta peptide contains as many as six consecutive lysine residues at the N-terminus.

Amino Acid Sequence↗

Membrane-mimicking entities induce structuring of the two-peptide bacteriocins plantaricin E/F and plantaricin J/K.

Lactobacillus plantarum C11 produces plantaricin E/F (PlnE/F) and plantaricin J/K (PlnJ/K), two bacteriocins whose activity depends on the complementary action of two peptides (PlnE and PlnF; PlnJ and PlnK). Three of the individual Pln peptides possess some antimicrobial activity, but the highest bacteriocin activity is obtained by combining complementary peptides in about a one-to-one ratio. Circular dichroism was used to study the structure of the Pln peptides under various conditions. All four peptides were unstructured under aqueous conditions but adopted a partly alpha-helical structure in the presence of trifluoroethanol, micelles of dodecylphosphocholine, and negatively charged dioleoylphosphoglycerol (DOPG) liposomes. Far less structure was induced by zwitterionic dioleoylglycerophosphocholine liposomes, indicating that a net negative charge on the phospholipid bilayer is important for a structure-inducing interaction between (positively charged) Pln peptides and a membrane. The structuring of complementary peptides was considerably enhanced when both (PlnE and PlnF or PlnJ and PlnK) were added simultaneously to DOPG liposomes. Such additional structuring was not observed in experiments with trifluoroethanol or dodecylphosphocholine, indicating that the apparent structure-inducing interaction between complementary Pln peptides requires the presence of a phospholipid bilayer. The amino acid sequences of the Pln peptides are such that the alpha-helical structures adopted upon interaction with the membrane and each other are amphiphilic in nature, thus enabling membrane interactions.

Amino Acid Sequence↗

Early steps in the unfolding of thermolysin-like proteases.

Several series of site-directed mutations in thermolysin-like proteases are presented that show remarkable nonadditivity in their effect on thermal stability. A simple model is proposed that relates this nonadditivity to the occurrence of independent partial unfolding processes that occur in parallel at elevated temperatures. To prove this model, a thermolysin-like protease was designed in which two mutations located approximately 35 A apart in the structure individually exert small stabilizing effects of 2.3 and 4. 1 degreesC, respectively, but when combined stabilize the protease by 14.6 degreesC. This overadditivity, which follows directly from the model, confirms that unfolding of this engineered protease starts in parallel at two different regions of the protein.

Bacillus↗

Plantaricin A is an amphiphilic alpha-helical bacteriocin-like pheromone which exerts antimicrobial and pheromone activities through different mechanisms.

Production of bacteriocins by lactic acid bacteria is in some cases regulated by a quorum sensing mechanism that involves a secreted bacteriocin-like peptide pheromone. In the case of Lactobacillus plantarum C11, this pheromone, the 26-mer plantaricin A (PlnA), has the interesting property of having both bacteriocin and pheromone activities. To gain insight into how PlnA functions as a pheromone and as a bacteriocin, the L- and D-enantiomers of an N-terminally truncated form of PlnA were synthesized (PlnA-22L and PlnA-22D; PlnA-22L has full biological activity). With circular dichroism, it was shown that the two peptides are unstructured in aqueous solution, but they adopt mirror-image amphiphilic helical structures in the presence of trifluoroethanol and membrane-mimicking entities such as micelles of dodecylphosphocholine and negatively charged Ole2GroPGro liposomes, but not in the presence of zwitterionic Ole2GroPCho liposomes. Thus, the negative charge on the membrane is important for structuring of the (positively charged) PlnA peptides. In terms of in vivo antimicrobial activity, PlnA-22L and PlnA-22D behaved almost identically. Likewise, the peptides dissipated the membrane potential and the transmembrane pH gradient in sensitive cells equally effectively. PlnA-22L induced bacteriocin production in L. plantarum C11 (i.e., displayed pheromone activity), the level of induction being clearly dose-dependent. PlnA-22D did not display pheromone activity, but, at high concentrations, was able to inhibit the pheromone activity of PlnA-22L. The results indicate that the antimicrobial activity of PlnA does not require chiral interactions and is mediated through the formation of a strongly amphiphilic alpha-helical structure. In contrast, PlnA's pheromone activity is dependent on a chiral interaction between the amphiphilic helix (PlnA-22L) and a receptor protein. One may speculate that PlnA is an evolutionary intermediate between a true bacteriocin and a pheromone.

Amino Acid Sequence↗

A system for heterologous expression of bacteriocins in Lactobacillus sake.

A system for efficient heterologous expression of class II bacteriocins is described that is based on introducing two plasmids in a bacteriocin-negative Lactobacillus sake strain. The first plasmid (pSAK20) contains the genes necessary for transcriptional activation of the Sakacin A promoter as well as export and processing of bacteriocin precursors. The second plasmid (a pLPV111 derivative) contains the structural and immunity genes for the bacteriocin of interest fused to the sakacin A promoter. Using this system, various bacteriocins were produced at levels equal to or higher than those obtained with the corresponding wild-type producer strains.

Bacteriocins↗

Probing catalytic hinge bending motions in thermolysin-like proteases by glycine --> alanine mutations.

The active site of thermolysin-like proteases (TLPs) is located at the bottom of a cleft between the N- and C-terminal domains. Crystallographic studies have shown that the active-site cleft is more closed in ligand-binding TLPs than in ligand-free TLPs. Accordingly, it has been proposed that TLPs undergo a hinge-bending motion during catalysis resulting in "closure" and "opening" of the active-site cleft. Two hinge regions have been proposed. One is located around a conserved glycine 78; the second involves residues 135 and 136. The importance of conserved glycine residues in these hinge regions was studied experimentally by analyzing the effects of Gly --> Ala mutations on catalytic activity. Eight such mutations were made in the TLP of Bacillus stearothermophilus (TLP-ste) and their effects on activity toward casein and various peptide substrates were determined. Only the Gly78Ala, Gly136Ala, and Gly135Ala + Gly136Ala mutants decreased catalytic activity significantly. These mutants displayed a reduction in kcat/Km for 3-(2-furylacryloyl)-L-glycyl-L-leucine amide of 73%, 62%, and 96%, respectively. Comparisons of effects on kcat/Km for various substrates with effects on the Ki for phosphoramidon suggested that the mutation at position 78 primarily had an effect on substrate binding, whereas the mutations at positions 135 and 136 primarily influence kcat. The apparent importance of conserved glycine residues in proposed hinge-bending regions for TLP activity supports the idea that hinge-bending is an essential part of catalysis.

Alanine↗

A single calcium binding site is crucial for the calcium-dependent thermal stability of thermolysin-like proteases.

Thermostable thermolysin-like proteases (TLPs), such as the TLP of Bacillus stearothermophilus CU-21 (TLP-ste), bind calcium in one double (Ca1,2) and two single (Ca3, Ca4) calcium binding sites. The single sites are absent in thermolabile TLPs, suggesting that they are determinants of (variation in) TLP stability. Mutations in the Ca3 and Ca4 sites of TLP-ste indeed reduced thermal stability, but only mutations in the Ca3 site affected the calcium-dependence of stability. The predominant effect of the Ca3 site results from the fact that the Ca3 site is part of a region of TLP-ste, which unfolding is crucial for thermal inactivation. Thermal inactivation is not caused by the absence of calcium from the Ca3 site per se, but rather by unfolding of a region of TLP-ste for which stability depends on the occupancy of the Ca3 site. In accordance with this concept is the observation that the effects of mutations in the Ca3 site could be compensated by stabilizing mutations near this site. In addition, it was observed that the contribution of calcium binding to the Ca3 was substantially reduced in extremely stable TLP-ste variants containing multiple stabilizing mutations in the Ca3 region. Apparently, in these latter variants, unfolding of the Ca3 region contributes little to the overall process of thermal inactivation.

Amino Acid Sequence↗

Engineering an enzyme to resist boiling.

In recent years, many efforts have been made to isolate enzymes from extremophilic organisms in the hope to unravel the structural basis for hyperstability and to obtain hyperstable biocatalysts. Here we show how a moderately stable enzyme (a thermolysin-like protease from Bacillus stearothermophilus, TLP-ste) can be made hyperstable by a limited number of mutations. The mutational strategy included replacing residues in TLP-ste by residues found at equivalent positions in naturally occurring, more thermostable variants, as well as rationally designed mutations. Thus, an extremely stable 8-fold mutant enzyme was obtained that was able to function at 100 degrees C and in the presence of denaturing agents. This 8-fold mutant contained a relatively large number of mutations whose stabilizing effect is generally considered to result from a reduction of the entropy of the unfolded state ("rigidifying" mutations such as Gly --> Ala, Ala --> Pro, and the introduction of a disulfide bridge). Remarkably, whereas hyperstable enzymes isolated from natural sources often have reduced activity at low temperatures, the 8-fold mutant displayed wild-type-like activity at 37 degrees C.

Amino Acid Substitution↗

Amphiphilic alpha-helices are important structural motifs in the alpha and beta peptides that constitute the bacteriocin lactococcin G--enhancement of helix formation upon alpha-beta interaction.

Lactococcin G (LcnG) is an antimicrobial substance (bacteriocin) consisting of two peptides, LcnG-alpha and LcnG-beta. The structures of intact LcnG-alpha and LcnG-beta as well as various fragments of these peptides were studied by circular dichroism (CD) under several conditions. All peptides had a non-structured conformation in aqueous solutions. In the presence of trifluoroethanol, dodecylphosphocholine micelles and (negatively charged) dioleoylglycerophosphoglycerol (Ole2GroPGro) liposomes, varying amounts of alpha-helical structure were induced. Comparisons of the various fragments showed that helicity was concentrated in those parts of LcnG-alpha and LcnG-beta that would become amphiphilic if an alpha-helical structure was adopted. In the presence of zwitterionic dioleoylglycerophosphocholine (Ole2GroPCho) liposomes, the peptides were much less (if at all) structured, suggesting that the excess of positive charge on the antimicrobial peptides needs to be compensated by an excess of negative charge on the membrane. The structuring of LcnG-alpha and LcnG-beta in the presence of Ole2GroPGro liposomes was considerably enhanced when both peptides were presented simultaneously to the membranes. Consecutive addition of the two peptides to Ole2GroPGro liposomes did not give this additional structuring, indicating that the individual LcnG-alpha and LcnG-beta peptides associate with the membrane in a virtually irreversible manner that makes them inaccessible for interaction with the complementary peptide. The results suggest that upon arrival at and interaction with the target membrane, LcnG-alpha and LcnG-beta form a complex that consists of approximately 50% amphiphilic alpha-helices.

Bacteriocins↗