PubMed Health⌕ Search

Biomedical subjects

V Lyamichev

Publications and source records attributed to V Lyamichev.

14 recordsLinked to original sources

Improved sensitivity for solid-support invasive cleavage reactions with flow cytometry analysis.

A new configuration of the solid-support invasive cleavage reaction provides a small reaction-volume format for high-sensitivity discrimination of nucleic acid targets with single nucleotide differences. With target concentrations as low as 2 amol/assay, the solid-support invasive cleavage reaction clearly distinguishes single base mutations. Two oligonucleotides tethered to the solid support hybridize to the target nucleic acid, forming a tripartite substrate that can be recognized and cleaved by Cleavase, a structure-specific 5'-nuclease. Each cleavage event yields fluorescence signal on the surface. When microspheres serve as the solid-support surface, analysis by fluorometer imparts real-time information about change in the reaction signal over time. Flow cytometry provides an alternative detection technology that collects endpoint information about the reaction signal on individual microspheres. A reaction volume of 10 microL with as few as 3000 microspheres is sufficient to distinguish single nucleotide differences at target concentrations less than 200 fM. This sensitivity level is within the range required for analysis of SNPs in genomic DNA. In addition, the flow cytometry format has multiplexing potential, making the microsphere-based invasive cleavage assay attractive for high-throughput genomic applications.

Apolipoproteins E↗

Analysis of single nucleotide polymorphisms with solid phase invasive cleavage reactions.

Using microparticles as the capture surface and fluorescence resonance energy transfer as the detection technology, we have demonstrated the feasibility of performing the invasive cleavage reaction on a solid phase. An effective tool for many genomic applications, the solution phase invasive cleavage assay is a signal amplification method capable of distinguishing nucleic acids that differ by only a single base mutation. The method positions two overlapping oligonucleotides, the probe and upstream oligonucleotides, on the target nucleic acid to create a complex recognized and cleaved by a structure-specific 5'-nuclease. For microarray and other multiplex applications, however, the method must be adapted to a solid phase platform. Effective cleavage of the probe oligonucleotide occurred when either of the two required overlapping oligonucleotides was configured as the particle-bound reagent and also when both oligonucleotides were attached to the solid phase. Positioning probe oligonucleotides away from the particle surface via long tethers improved both the signal and the reaction rates. The particle-based invasive cleavage reaction was capable of distinguishing the ApoE Cys158 and Arg158 alleles at target concentrations as low as 100 amol/assay (0.5 pM).

Alleles↗

Comparison of the 5' nuclease activities of taq DNA polymerase and its isolated nuclease domain.

Many eubacterial DNA polymerases are bifunctional molecules having both polymerization (P) and 5' nuclease (N) activities, which are contained in separable domains. We previously showed that the DNA polymerase I of Thermus aquaticus (TaqNP) endonucleolytically cleaves DNA substrates, releasing unpaired 5' arms of bifurcated duplexes. Here, we compare the substrate specificities of TaqNP and the isolated 5' nuclease domain of this enzyme, TaqN. Both enzymes are significantly activated by primer oligonucleotides that are hybridized to the 3' arm of the bifurcation; optimal stimulation requires overlap of the 3' terminal nucleotide of the primer with the terminal base pair of the duplex, but the terminal nucleotide need not hybridize to the complementary strand in the substrate. In the presence of Mn2+ ions, TaqN can cleave both RNA and circular DNA at structural bifurcations. Certain anti-TaqNP mAbs block cleavage by one or both enzymes, whereas others can stimulate cleavage of nonoptimal substrates.

Base Sequence↗

Clinical, genetic, and pharmacogenetic applications of the Invader assay.

The Invader technology has been developed for the detection of nucleic acids. It is a signal amplification system able to accurately quantify DNA and RNA targets with high sensitivity. Exquisite specificity is achieved by combining hybridization with enzyme recognition, which provides the ability to discriminate mutant from wild-type at ratios greater than 1/1000 (mutant/wt). The technology is isothermal and flexible and incorporates a homogeneous fluorescence readout. It is therefore readily adaptable for use in clinical reference laboratories, as well as high-throughput applications using 96-, 384-, and 1,536-well microtiter plate formats. The molecular mechanism of the system and specific applications for use in clinical and research laboratories are described. These include direct analysis of unamplified human genomic DNA to detect mutations and single-nucleotide polymorphisms associated with factor V Leiden, factor II, cystic fibrosis, and apolipoprotein E, and gene expression assays that quantify messenger RNA levels in cells using direct lysates.

Clinical Laboratory Techniques↗

Polymorphism identification and quantitative detection of genomic DNA by invasive cleavage of oligonucleotide probes.

Flap endonucleases (FENs) isolated from archaea are shown to recognize and cleave a structure formed when two overlapping oligonucleotides hybridize to a target DNA strand. The downstream oligonucleotide probe is cleaved, and the precise site of cleavage is dependent on the amount of overlap with the upstream oligonucleotide. We have demonstrated that use of thermostable archaeal FENs allows the reaction to be performed at temperatures that promote probe turnover without the need for temperature cycling. The resulting amplification of the cleavage signal enables the detection of specific DNA targets at sub-attomole levels within complex mixtures. Moreover, we provide evidence that this cleavage is sufficiently specific to enable discrimination of single-base differences and can differentiate homozygotes from heterozygotes in single-copy genes in genomic DNA.

Archaeoglobus fulgidus↗

Determination of hepatitis C virus genotypes in the United States by cleavase fragment length polymorphism analysis.

We describe the application of a new DNA-scanning method, which has been termed Cleavase Fragment Length Polymorphism (CFLP; Third Wave Technologies, Inc., Madison, Wis.), for the determination of the genotype of hepatitis C virus (HCV). CFLP analysis results in the generation of structural fingerprints that allow discrimination of different DNA sequences. We analyzed 251-bp cDNA products generated by reverse transcription-PCR of the well-conserved 5'-noncoding region of HCV. We determined the genotypes of 87 samples by DNA sequencing and found isolates representing 98% of the types typically encountered in the United States, i.e., types 1a, 1b, 2a/c, 2b, 3a, and 4. Blinded CFLP analysis of these samples was 100% concordant with DNA sequencing results, such that closely related genotypes yielded patterns with strong familial resemblance whereas more divergent sequences yielded patterns with pronounced dissimilarities. In each case, the aggregate pattern was indicative of genotypic grouping, while finer changes suggested subgenotypic differences. We also assessed the reproducibility of CFLP analysis in HCV genotyping by analyzing three distinct isolates belonging to a single subtype. These three isolates yielded indistinguishable CFLP patterns, as did replicate analysis of a single isolate. This study demonstrates the suitability of this technology for HCV genotyping and suggests that it may provide a low-cost, high-throughput alternative to DNA sequencing or other, more costly or cumbersome genotyping approaches.

Base Sequence↗

Differentiation of bacterial 16S rRNA genes and intergenic regions and Mycobacterium tuberculosis katG genes by structure-specific endonuclease cleavage.

We describe here a new approach for analyzing nucleic acid sequences using a structure-specific endonuclease, Cleavase I. We have applied this technique to the detection and localization of mutations associated with isoniazid resistance in Mycobacterium tuberculosis and for differentiating bacterial genera, species and strains. The technique described here is based on the observation that single strands of DNAs can assume defined conformations, which can be detected and cleaved by structure-specific endonucleases such as Cleavase I. The patterns of fragments produced are characteristic of the sequences responsible for the structure, so that each DNA has its own structural fingerprint. Amplicons, containing either a single 5'-fluorescein or 5'-tetramethyl rhodamine label were generated from a 620-bp segment of the katG gene of isoniazid-resistant and -sensitive M. tuberculosis, the 5' 350 bp of the 16S rRNA genes of Escherichia coli O157:H7, Salmonella typhimurium, Salmonella enteritidis, Salmonella arizonae, Shigella sonnei, Shigella dysenteriae, Campylobacter jejuni, staphylococcus, hominis, Staphylococcus warneri, and Staphylococcus aureus and an approximately 550-bp DNA segment comprising the intergenic region between the 16S and 23S rRNA genes of Salmonella typhimurium, Salmonella enteritidis, Salmonella arizonae, Shigella sonnei, and Shigella dysenteriae serotypes 1, 2, and 8. Changes in the structural fingerprints of DNA fragments derived from the katG genes of isoniazid-resistant M. tuberculosis isolates were clearly identified and could be mapped to the site of the actual mutation relative to the labeled end. Bland patterns which clearly differentiated bacteria to the level of genus and, in some cases, species were generated from the 16S genes. Cleavase I analysis of the intergenic regions of Salmonella and Shigella species differentiated genus, species, and serotypes. Structural fingerprinting by digestion with Cleavase I is a rapid, simple, and sensitive method for analyzing nucleic acid sequences and may find wide utility in microbial analysis.

Bacterial Proteins↗

Structure-specific endonucleolytic cleavage of nucleic acids by eubacterial DNA polymerases.

Previously known 5' exonucleases of several eubacterial DNA polymerases have now been shown to be structure-specific endonucleases that cleave single-stranded DNA or RNA at the bifurcated end of a base-paired duplex. Cleavage was not coupled to synthesis, although primers accelerated the rate of cleavage considerably. The enzyme appeared to gain access to the cleavage site by moving from the free end of a 5' extension to the bifurcation of the duplex, where cleavage took place. Single-stranded 5' arms up to 200 nucleotides long were cleaved from such a duplex. Essentially any linear single-stranded nucleic acid can be targeted for specific cleavage by the 5' nuclease of DNA polymerase through hybridization with an oligonucleotide that converts the desired cleavage site into a substrate.

Base Sequence↗

Unusual conformation of (dA)n.(dT)n-tracts as revealed by cyclobutane thymine-thymine dimer formation.

Cyclobutane dimer formation has been used to probe conformation of (dA)n.(dT)n-tracts cloned in plasmid DNA. The observed dimer probability patterns for (dA)n.(dT)n-tracts with n greater than or equal to 4 exhibit maximum intensity at the 3'-terminal TT site of Tn-tract, whereas photoreactivity at all the other TT sites is inhibited. Both the temperature and dimethyl sulfoxide increase dimer formation within Tn-tracts and result in an even dimer pattern. The data obtained have been interpreted in terms of an unusual structure adopted by (dA)n.(dT)n-tracts. An influence of flanking base pairs, ethidium bromide binding and ionic strength has also been studied.

Base Sequence↗

Formation of (dA-dT)n cruciforms in Escherichia coli cells under different environmental conditions.

We have detected cruciform formation of (dA-dT)n inserts in Escherichia coli cells by analyzing the superhelical density of isolated plasmid DNA samples and by probing intracellular DNA with chloroacetaldehyde. The plasmids we used were pUC19 containing inserts of (dA-dT)n. The cruciforms appeared after cells underwent different stresses: inhibition of protein synthesis, anaerbiosis, and osmotic shock. At the same time, all these stimuli led to an increase in superhelical density of the control pUC19 plasmid DNA. Therefore, we suggest that the increase in plasmid superhelicity in response to different environmental stimuli entails the appearance of cruciform structures. The use of the (dA-dT)n units of various lengths made it possible to estimate the superhelical density of the plasmid DNA in vivo.

Acetaldehyde↗

Chemical probing of the homopurine.homopyrimidine tract in supercoiled DNA at single-nucleotide resolution.

Local structure of the homopurine.homopyrimidine tract in a supercoiled plasmid pEJ4 was studied using chemical probes at single-nucleotide resolution. The conformation of the homopyrimidine strand was probed by osmium tetroxide, pyridine (Os,py) while that of the homopurine strand was tested by diethyl pyrocarbonate (DEPC), i.e. by probes reacting preferentially with single-stranded DNA. At weakly acidic pH values, a strong Os,py attack on three nucleotides at the centre of the (dC-dT)16 block and a weaker attack on two nucleotides at the end of the block were observed. DEPC modified adenines in the 5'-half of the homopurine strand. Os,py modification at the centre of the block corresponded to the loop of the hairpin formed by the homopyrimidine tract, while DEPC modification corresponded to the unstructured half of the homopurine strand in the model of protonated triplex H form of DNA.

Animals↗

A structural transition in d(AT)n.d(AT)n inserts within superhelical DNA.

We have constructed plasmids carrying d(AT)n.d(AT)n inserts of different lengths. Two-dimensional gel electrophoresis patterns show that an increase in the negative superhelicity of these DNAs brings about a structural transition within the inserts, resulting in a reduction of the superhelical stress. However, this reduction corresponds to the expected values neither for cruciform nor the Z form. Those DNA topoisomers in which the structural transition had occurred proved to be specifically recognizable by single-strand-specific endonuclease S1, with the cleavage site situated at the centre of the insert. These data, as well as kinetic studies, suggest that the cloned d(AT)n.d(AT)n sequences adopt a cruciform rather than the Z-form structure. We discuss plausible reasons of the discrepancy between the observed superhelical stress release and that expected for the transition of the insert to the cruciform state.

Base Sequence↗

Kinetics of cruciform formation and stability of cruciform structure in superhelical DNA.

This is a study of the kinetics of formation of a cruciform structure from the longest palindromic sequence in plasmid pAO3 DNA. DNA was prepared so as to be free of cruciforms even in topoisomers whose negative superhelicity was great enough to induce cruciform formation. Samples of such DNA were incubated at various temperatures, the incubation time varying over a wide range. Then the state was frozen by chilling. Two-dimensional electrophoretic analysis made it possible to estimate the fraction of molecules that got the cruciform structure during incubation. Precautions were taken for electrophoresis conditions to rule out any spontaneous conformational changes within the palindromic region. The relaxation time at the midpoint of the transition ranged from 30 min at 30 C to 50 hrs at 20 C, both in 0.1SSC. An increase in the negative superhelical density by 0.01 led to a 500-fold reduction of the relaxation time at 30 C but had little effect at 20 C. The probability of cruciform formation has been examined as a function of temperature. It has been shown that the cruciform state is no longer the predominant one at elevated temperatures: the cruciformation probability drops to an insignificant value for all of the topoisomers involved. Data have been obtained suggesting that the cruciform formation at the major palindromic site is not the only structural transition possible in pAO3 DNA.

DNA, Superhelical↗

The absence of cruciform structures from pAO3 plasmid DNA in vivo.

We extracted pAO3 plasmid DNA from E. coli cells, having "frozen" the transition between cruciform and double-helical conformations in DNA. The characteristic feature of the DNA isolation procedure is that all steps were carried out at temperature between 0 and 4 C and no phenol deproteinization was used, since it has been discovered that phenol destabilizes cruciform structures in pAO3 DNA. Two-dimensional gel electrophoresis has revealed no cruciform structures in the pAO3 DNA preparations obtained this way, although the superhelical density of DNA was sufficient for them. Cruciform structures are absent from intracellular pAO3 DNA at all growth stages of the bacterial culture: stationary and logarithmic, and under the induction of pAO3 DNA replication in chloramphenicol-treated cells.

DNA, Bacterial↗