PubMed Health⌕ Search

Biomedical subjects

V Siksnys

Publications and source records attributed to V Siksnys.

At least 19 recordsLinked to original sources
PubMed2005

Conversion of the tetrameric restriction endonuclease Bse634I into a dimer: oligomeric structure-stability-function correlations.

The Bse634I restriction endonuclease is a tetramer and belongs to the type IIF subtype of restriction enzymes. It requires two recognition sites for its optimal activity and cleaves plasmid DNA with two sites much faster than a single-site DNA. We show that disruption of the tetramerisation interface of Bse634I by site-directed mutagenesis converts the tetrameric enzyme into a dimer. Dimeric W228A mutant cleaves plasmid DNA containing one or two sites with the same efficiency as the tetramer cleaves the two-site plasmid. Hence, the catalytic activity of the Bse634I tetramer on a single-site DNA is down-regulated due to the cross-talking interactions between the individual dimers. The autoinhibition within the Bse634I tetramer is relieved by bridging two DNA copies into the synaptic complex that promotes fast and concerted cleavage at both sites. Cleavage analysis of the oligonucleotide attached to the solid support revealed that Bse634I is able to form catalytically competent synaptic complexes by bridging two molecules of the cognate DNA, cognate DNA-miscognate DNA and cognate DNA-product DNA. Taken together, our data demonstrate that a single W228A mutation converts a tetrameric type IIF restriction enzyme Bse634I into the orthodox dimeric type IIP restriction endonuclease. However, the stability of the dimer towards chemical denaturants, thermal inactivation and proteolytic degradation are compromised.

Chromatography, Gel↗
PubMed2001

Specific DNA recognition by the type II restriction endonuclease MunI: the effect of pH.

To investigate the effect of pH on sequence-specific binding, a thermodynamic characterization of the interaction of the protein MunI with a specific, and a nonspecific, oligonucleotide was performed. MunI is a type II restriction endonuclease which is able to bind specifically, but loses its enzymatic activity in the absence of magnesium ions. Comparison of the specific and nonspecific interactions at 10 and 25 degrees C shows that the latter is accompanied by a small change in enthalpy, and a negligible change in constant pressure heat capacity. On going through the pH range 5.75-9.0 at 25 degrees C, the affinity of specific complex formation is reduced by 20-fold. The interaction is accompanied by the protonation of groups assumed to be on the protein. Based on the simplest model that will fit the data, two distinct protonation events are observed. At low pH, two groups per protein molecule undergo protonation with a pK(a) of 6.0 and 6.9 in the free and bound forms, respectively. At high pH, a further independent protonation occurs involving two groups with pK(a) values of 8.9 and approximately 10.7 in the free and bound forms, respectively. The change in heat capacity ranges from -2.7 to -1.7 kJ mol(-1) K(-1) in going from pH 6.5 to 8.5. This range of variation of change in heat capacity can be accounted for by the effects of protonation of the interacting molecules. The change in heat capacity, calculated from surface area burial using a previously established relationship (1.15 kJ mol(-1) K(-1)), does not correlate well with the experimentally determined values.

Calorimetry↗
PubMed2001

DNA cleavage reactions by type II restriction enzymes that require two copies of their recognition sites.

Several type II restriction endonucleases interact with two copies of their target sequence before they cleave DNA. Three such enzymes, NgoMIV, Cfr10I and NaeI, were tested on plasmids with one or two copies of their recognition sites, and on catenanes containing two interlinked rings of DNA with one site in each ring. The enzymes showed distinct patterns of behaviour. NgoMIV and NaeI cleaved the plasmid with two sites faster than that with one site and the catenanes at an intermediate rate, while Cfr10I gave similar steady-state rates on all three substrates. Both Cfr10I and NgoMIV converted the majority of the substrates with two sites directly to the products cut at both sites, while NaeI cleaved just one site at a time. All three enzymes thus synapse two DNA sites through three-dimensional space before cleaving DNA. With Cfr10I and NgoMIV, both sites are cleaved in one turnover, in a manner consistent with their tetrameric structures, while the cleavage of a single site by NaeI indicates that the second site acts not as a substrate but as an activator, as reported previously. The complexes spanning two sites have longer lifetimes on catenanes with one site in each ring than on circular DNA with two sites, which indicates that the catenanes have more freedom for site juxtaposition than plasmids with sites in cis.

Bacterial Proteins↗
PubMed2000

Novel subtype of type IIs restriction enzymes. BfiI endonuclease exhibits similarities to the EDTA-resistant nuclease Nuc of Salmonella typhimurium.

The type IIs restriction enzyme BfiI recognizes the non-palindromic nucleotide sequence 5'-ACTGGG-3' and cleaves complementary DNA strands 5/4 nucleotides downstream of the recognition sequence. The genes coding for the BfiI restriction-modification (R-M) system were cloned/sequenced and biochemical characterization of BfiI restriction enzyme was performed. The BfiI R-M system contained three proteins: two N4-methylcytosine methyltransferases and a restriction enzyme. Sequencing of bisulfite-treated methylated DNA indicated that each methyltransferase modifies cytosines on opposite strands of the recognition sequence. The N-terminal part of the BfiI restriction enzyme amino acid sequence revealed intriguing similarities to an EDTA-resistant nuclease of Salmonella typhimurium. Biochemical analyses demonstrated that BfiI, like the nuclease of S. typhimurium, cleaves DNA in the absence of Mg(2+) ions and hydrolyzes an artificial substrate bis(p-nitrophenyl) phosphate. However, unlike the nonspecific S. typhimurium nuclease, BfiI restriction enzyme cleaves DNA specifically. We propose that the DNA-binding specificity of BfiI stems from the C-terminal part of the protein. The catalytic N-terminal subdomain of BfiI radically differs from that of type II restriction enzymes and is presumably similar to the EDTA-resistant nonspecific nuclease of S. typhimurium; therefore, BfiI did not require metal ions for catalysis. We suggest that BfiI represents a novel subclass of type IIs restriction enzymes that differs from the archetypal FokI endonuclease by the fold of its cleavage domain, the domain location, and reaction mechanism.

Amino Acid Sequence↗
PubMed2000

Structure of the tetrameric restriction endonuclease NgoMIV in complex with cleaved DNA.

The crystal structure of the NgoMIV restriction endonuclease in complex with cleaved DNA has been determined at 1.6 A resolution. The crystallographic asymmetric unit contains a protein tetramer and two DNA molecules cleaved at their recognition sites. This is the first structure of a tetrameric restriction enzyme-DNA complex. In the tetramer, two primary dimers are arranged back to back with two oligonucleotides bound in clefts on opposite sides of the tetramer. The DNA molecules retain a B-type conformation and have an enclosed angle between their helical axes of 60 degrees. Sequence-specific interactions occur in both the major and minor grooves. Two Mg2+ ions are located close to the cleaved phosphate at the active site of NgoMIV. Biochemical experiments show that interactions between the recognition sites within the tetramer greatly increase DNA cleavage efficiency.

Amino Acid Sequence↗
PubMed1999

Crystal structure of MunI restriction endonuclease in complex with cognate DNA at 1.7 A resolution.

The MunI restriction enzyme recognizes the palindromic hexanucleotide sequence C/AATTG (the '/' indicates the cleavage site). The crystal structure of its active site mutant D83A bound to cognate DNA has been determined at 1.7 A resolution. Base-specific contacts between MunI and DNA occur exclusively in the major groove. While DNA-binding sites of most other restriction enzymes are comprised of discontinuous sequence segments, MunI combines all residues involved in the base-specific contacts within one short stretch (residues R115-R121) located at the N-terminal region of the 3(10)4 helix. The outer CG base pair of the recognition sequence is recognized solely by R115 through hydrogen bonds made by backbone and side chain atoms to both bases. The mechanism of recognition of the central AATT nucleotides by MunI is similar to that of EcoRI, which recognizes the G/AATTC sequence. The local conformation of AATT deviates from the typical B-DNA form and is remarkably similar to EcoRI-DNA. It appears to be essential for specific hydrogen bonding and recognition by MunI and EcoRI.

Binding Sites↗
PubMed1999

The Cfr10I restriction enzyme is functional as a tetramer.

It is thought that most of the type II restriction endonucleases interact with DNA as homodimers. Cfr10I is a typical type II restriction enzyme that recognises the 5'-Pu decreases CCGGPy sequence and cleaves it as indicated by the arrow. Gel-filtration and analytical ultracentrifugation data presented here indicate that Cfr10I is a homotetramer in isolation. The only SfiI restriction enzyme that recognises the long interrupted recognition sequence 5'-GGCCNNNNNGGCC has been previously reported to operate as a tetramer however, its structure is unknown. Analysis of Cfr10I crystals revealed that a single molecule in the asymmetric unit is repeated by D2 symmetry to form a tetramer. To determine whether the packing of the Cfr10I in the crystal reflects the quaternary structure of the protein in solution, the tryptophan W220 residue located at the putative dimer-dimer interface was mutated to alanine, and the structural and functional consequences of the substitution were analysed. Equilibrium sedimentation experiments revealed that, in contrast to the wild-type Cfr10I, the W220A mutant exists in solution predominantly as a dimer. In addition, the tetramer seems to be a catalytically important form of Cfr10I, since the DNA cleavage activity of the W220A mutant is < 0.1% of that of the wild-type enzyme. Further, analysis of plasmid DNA cleavage suggests that the Cfr10I tetramer is able to interact with two copies of the recognition sequence, located on the same DNA molecule. Indeed, electron microscopy studies demonstrated that two distant recognition sites are brought together through the DNA looping induced by the simultaneous binding of the Cfr10I tetramer to both sites. These data are consistent with the tetramer being a functionally important form of Cfr10I.

Amino Acid Sequence↗
PubMed1999

Plasmid DNA cleavage by MunI restriction enzyme: single-turnover and steady-state kinetic analysis.

Mutational analysis has previously indicated that D83 and E98 residues are essential for DNA cleavage activity and presumably chelate a Mg2+ ion at the active site of MunI restriction enzyme. In the absence of metal ions, protonation of an ionizable residue with a pKa > 7.0, most likely one of the active site carboxylates, controls the DNA binding specificity of MunI [Lagunavicius, A., Grazulis, S., Balciunaite, E., Vainius, D., and Siksnys, V. (1997) Biochemistry 36, 11093-11099.]. Thus, competition between H+ and Mg2+ binding at the active site of MunI presumably plays an important role in catalysis/binding. In the present study we have identified elementary steps and intermediates in the reaction pathway of plasmid DNA cleavage by MunI and elucidated the effect of pH and Mg2+ ions on the individual steps of the DNA cleavage reaction. The kinetic analysis indicated that the multiple-turnover rate of plasmid cleavage by MunI is limited by product release throughout the pH range 6.0-9.3. Quenched-flow experiments revealed that open circle DNA is an obligatory intermediate in the reaction pathway. Under optimal reaction conditions, open circle DNA remains bound to the MunI; however it is released into the solution at low [MgCl2]. Rate constants for the phoshodiester bond hydrolysis of the first (k1) and second (k2) strand of plasmid DNA at pH 7.0 and 10 mM MgCl2 more than 100-fold exceed the kcat value which is limited by product dissociation. The analysis of the pH and [Mg2+] dependences of k1 and k2 revealed that both H+ and Mg2+ ions compete for the binding to the same residue at the active site of MunI. Thus, the decreased rate of phosphodiester hydrolysis by MunI at pH < 7.0 may be due to the reduction of affinity for the Mg2+ binding at the active site. Kinetic analysis of DNA cleavage by MunI yielded estimates for the association-dissociation rate constants of enzyme-substrate complex and demonstrated the decreased stability of the MunI-DNA complex at pH values above 8.0.

Binding Sites↗
PubMed1998

Structure-based redesign of the catalytic/metal binding site of Cfr10I restriction endonuclease reveals importance of spatial rather than sequence conservation of active centre residues.

According to the crystal structure of Cfr10I restriction endonuclease the acidic residues D134, E71 and E204 are clustered together and presumably chelate metal ion(s) at the active site. Indeed, investigation of the DNA cleavage properties of substitutional mutants of Cfr10I D134A, E71Q, E71A and E204Q reveals that D134, E71 and E204 residues are essential for cleavage activity, supporting their active site function. Structural comparison indicates that the D134 residue of Cfr10I spatially overlaps with aspartate residues D91 and D74, from the invariant active site motifs 90PDX19EAK and 73PDX15DIK of EcoRI and EcoRV, respectively. However, structural studies in conjunction with mutational analyses suggest that the sequence motif 133PDX55KX13E corresponds to the active site of Cfr10I, but differs from canonical active site motifs of EcoRI and EcoRV. According to the crystal structure of Cfr10I the serine S188 residue from the 188SVK sequence motif is a spatial equivalent of the acidic residue from the (E/D)XK-part of the active site motif, which is conserved between EcoRI and EcoRV. Site-directed mutagenesis experiments of Cfr10I, however, revealed that the S188 was not so important for catalysis while the E204 residue located 2.8 A away indeed was essential for cleavage, suggesting that the glutamate E204 rather than the S188 residue contributes to the metal binding site in Cfr10I. In addition, model-building studies suggest that mutual interchange of the E204 and S188 residues should lead only to minor positional differences of the carboxylate residues of glutamate side-chains. The double mutant S188E/E204S was therefore prepared by site-directed mutagenesis where the active site motif 133PDX55KX13E of Cfr10I was changed to a canonical motif 133PDX53EVK, which is similar to that of EcoRI and EcoRV. Interestingly, the double mutant S188E/E204S of Cfr10I with redesigned active site structure, exhibited 10% of Wt cleavage activity in a gamma DNA cleavage assay. Thus, structure guided redesign of the catalytic/metal binding site of Cfr10I, provides novel experimental evidence to suggest that spatial rather than sequence conservation plays the dominant role in the formation of restriction enzyme active sites.

Amino Acid Sequence↗
PubMed1997

Site-directed mutagenesis of putative active site residues of MunI restriction endonuclease: replacement of catalytically essential carboxylate residues triggers DNA binding specificity.

Mapping of the conserved sequence regions in the restriction endonucleases MunI (C/AATTG) and EcoRI (G/AATTC) to the known X-ray structure of EcoRI allowed us to identify the sequence motif 82PDX14EXK as the putative catalytic/Mg2+ ion binding site of MunI [Siksnys, V., Zareckaja, N., Vaisvila, R., Timinskas, A., Stakenas, P., Butkus, V., & Janulaitis, A. Gene (1994) 142, 1-8]. Site-directed mutagenesis was then used to test whether amino acids P82, D83, E98, and K100 were important for the catalytic activity of MunI. Mutation P82A generated only a marginal effect on the cleavage properties of the enzyme. Investigation of the cleavage properties of the D83, E98, and K100 substitution mutants, however, in vivo and in vitro, revealed either an absence of catalytic activity or markedly reduced catalytic activity. Interestingly, the deleterious effect of the E98Q replacement in vitro was partially overcome by replacement of the metal cofactor used. Though the catalytic activity of the E98Q mutant was only 0.4% of WT under standard conditions (in the presence of Mg2+ ions), the mutant exhibited 40% of WT catalytic activity in buffer supplemented with Mn2+ ions. Further, the DNA binding properties of these substitution mutants were analyzed using the gel shift assay technique. In the absence of Mg2+ ions, WT MunI bound both cognate DNA and noncognate sequences with similar low affinities. The D83A and E98A mutants, in contrast, in the absence of Mg2+ ions, exhibited significant specificity of binding to cognate DNA, suggesting that the substitutions made can simulate the effect of the Mg2+ ion in conferring specificity to the MunI restriction enzyme.

Binding Sites↗
PubMed1997

DNA binding specificity of MunI restriction endonuclease is controlled by pH and calcium ions: involvement of active site carboxylate residues.

Gel shift analysis reveals [Lagunavicius, A., & Siksnys, V. (1997) Biochemistry 36 (preceding paper in this issue)] that at pH 8.3 in the absence of Mg2+, MunI restriction endonuclease exhibits little DNA binding specificity, as compared with the D83A and E98A mutants of MunI. This suggests that charged carboxylate residue(s) influence the DNA binding specificity of MunI. In our efforts to establish the determinants of MunI binding specificity, we investigated the possible role of the ionic milieu, and we found that lowering pH or elevating Ca2+ levels per se induces specific DNA recognition by WT MunI. In contrast to the binding experiments at pH 8.3, gel shift analysis at pH 6.5 indicated tight sequence-specific binding of WT MunI in the absence of Mg2+, suggesting that protonation of active site carboxylate residue(s) which manifest anomalously high pKa value(s) control binding specificity. Interestingly, Ca2+ ion concentrations, which did not support DNA cleavage by MunI also induced DNA binding specificity in WT MunI at pH 8.3. To explore possible structural changes upon DNA binding, we then used a limited proteolysis technique. Trypsin cleavage of MunI-DNA complexes indicated that in the presence of cognate DNA the MunI restriction endonuclease became resistant to proteolytic cleavage, suggesting that binding of specific DNA induced a structural change. CD measurements confirmed this observation, suggesting minor secondary structural differences between complexes of MunI with cognate and noncognate DNA. These results therefore suggest that binding of MunI to its recognition sequence triggers a conformational transition that correctly juxtaposes active site carboxylate residues, which then chelate Mg2+ ions. In the absence of Mg2+ ions, at pH 8.3, conditions in which carboxylate groups would be expected to be completely ionized, electrostatic repulsion between charged carboxylates and phosphate oxygens is enhanced such as to interfere with specific DNA binding. Elimination of such repulsive constraints by replacement of carboxylate residues, by lowering pH, or by metal ion binding, then promotes MunI binding specificity.

Binding Sites↗
PubMed1996

Crystal structure of Citrobacter freundii restriction endonuclease Cfr10I at 2.15 A resolution.

The X-ray crystal structure of Citrobacter freundii restriction endonuclease Cfr10I has been determined at a resolution of 2.15 A by multiple isomorphous replacement methods and refined to an R-factor of 19.64%. The structure of Cfr10I represents the first structure of a restriction endonuclease recognizing a degenerated nucleotide sequence. Structural comparison of Cfr10I with previously solved structures of other restriction enzymes suggests that recognition of specific sequence occurs through contacts in the major and the minor grooves of DNA. The arrangement of the putative active site residues shows some striking differences from previously described restriction endonucleases and supports a two-metal-ion mechanism of catalysis.

Binding Sites↗
PubMed1995

Evidence for substrate-assisted catalysis in the DNA cleavage of several restriction endonucleases.

Substrate-assisted catalysis was suggested to be involved in the DNA cleavage reaction of the restriction endonucleases (ENases) EcoRI and EcoRV, because experimental evidence exists that the phosphate group 3' to the scissile bond serves to deprotonate the attacking water. Here, we have addressed the question whether this is a general mechanistic feature of the reactions catalyzed by ENases. For this purpose, the cleavage rates of modified and unmodified oligodeoxyribonucleotides (oligos), in which the phosphate group 3' to the scissile bond is substituted by a methyl phosphonate, were measured for 17 enzymes. Only five turned out not to be inhibited by this modification (BglII, BstI, BstYI, Cfr10I and MunI); all others cleave the modified substrate at a strongly reduced rate or not at all. By employing a hemisubstituted oligo substrate we were able to further investigate the mechanism of inhibition of the latter group of ENases. Some of them cleave the unmodified strand of the modified substrate with a nearly unaltered rate, whereas the modified strand is cleaved very slowly or not at all (BamHI, Bsp143I, Eco72I, MflI, NdeII, Sau3AI, XhoII). The others (AluI, Cfr9I, DpnII, MboI, PvuII) cleave the modified strand of the modified substrate with a largely reduced rate or not at all. These ENases, however, cleave the unmodified strand with a reduced rate, too. Based on these results we conclude that BamHI, Bsp143I, Cfr9I, DpnII, Eco72I, MboI, MflI, NdeII, PvuII, Sau3AI and XhoII may possibly employ substrate assistance in catalysis.

Base Sequence↗
PubMed1995

Sequence similarity among type-II restriction endonucleases, related by their recognized 6-bp target and tetranucleotide-overhang cleavage.

The type-II restriction endonucleases (ENases) EcoRI (recognition sequence G decreases AATTC), RsrI (G decreases AATTC), XcyI (C decreases CCGGG), Cfr9I (C decreases CCGGG) and MunI (C decreases AATTG), all cleave hexanucleotide palindromic sequences, leaving tetranucleotide 5'-overhangs. Two regions of similarity that appear in the same order and relative position were identified among the amino-acid sequences of ENases. These regions map to the structural elements of EcoRI involved in the building of the catalytic site and in interactions with the central nucleotides of the recognized sequence. We propose that these ENases might all share a similar structural organization of the active site and structural motifs involved in interactions with specific DNA recognition sequences.

Amino Acid Sequence↗
PubMed1994

CAATTG-specific restriction-modification munI genes from Mycoplasma: sequence similarities between R.MunI and R.EcoRI.

The genes coding for the MunI restriction-modification (R-M) system, which recognize the sequence 5'-CAATTG, have been cloned and expressed in Escherichia coli, and their nucleotide sequences have been determined. The restriction endonuclease (ENase; R.MunI) is encoded by an open reading frame (ORF) of 606 bp, and a 699-bp ORF codes for the methyltransferase (MTase). The two genes are transcribed divergently from a 355-bp region. The gene encoding the ENase is preceded by a short co-linear ORF of 222 bp. The deduced amino acid (aa) sequence of this short ORF (SORF) closely resembles the sequences of a family of regulatory proteins that are associated with other type-II R-M systems. Comparative analysis of the deduced aa sequence of R.MunI revealed several regions of similarity to the EcoRI and RsrI ENases that recognize the GAATTC sequence. The similar mode of interaction of MunI, EcoRI and RsrI with the tetranucleotide AATT, common to the recognition sequences of these ENases, was suggested.

Amino Acid Sequence↗
PubMed1994

Five-stranded beta-sheet sandwiched with two alpha-helices: a structural link between restriction endonucleases EcoRI and EcoRV.

Examination of crystal structures of restriction endonucleases EcoRI and EcoRV complexes with their cognate DNA revealed a common structural element, which forms the core of both proteins. This element consists of a five-stranded beta-sheet and two alpha-helices packed against it and could be described as alpha-beta sandwich in which helices and beta-strands lie in two stacked layers. While the spatial structure of this alpha-beta sandwich is conserved in both enzymes, there are not detectable similarities between amino acid sequences except of a few residues involved in active site formation. Probably, other restriction endonucleases which have similar organization of the active site might possess similar structural element regardless of DNA sequence recognized and recognition elements in the enzyme used.

Amino Acid Sequence↗
PubMed1993

Catalytic and binding properties of restriction endonuclease Cfr9I.

The Cfr9I restriction endonuclease recognizes and cleaves duplex DNA sequence C decreases CCGGG. The binding of restriction endonuclease Cfr9I to DNA was examined in the absence of Mg2+ using gel-mobility-shift and nitrocellulose-filter-binding assays. It was shown that restriction endonuclease Cfr9I bound DNA fragments either containing or lacking the canonical recognition sequence with equal affinity. These results suggest that the specificity of restriction endonuclease Cfr9I is expressed during the catalytic step. The cleavage of supercoiled pUC18 DNA by restriction endonuclease Cfr9I showed that at low concentrations of MgCl2, only with open-circular DNA, nicks appeared in one strand at the recognition sequence, while the cleavage of the second strand was very slow. At higher concentrations of MgCl2 the enzyme cleaves either one or both strands of the DNA. Under these conditions the supercoiled DNA was converted to open-circular and linear forms simultaneously rather than consecutively. It was shown that open-circular DNA was a poor substrate for restriction endonuclease Cfr9I. These results suggested that both Mg2+ and intact recognition sequence are required to drive the enzyme into correct conformation to ensure DNA cleavage.

Base Sequence↗