PubMed Health⌕ Search

Biomedical subjects

Valeria Castelletto

Publications and source records attributed to Valeria Castelletto.

10 recordsLinked to original sources
PubMed2007

Beta-lactoglobulin fibers under capillary flow.

We describe the capillary flow behavior of gels of beta-lactoglobulin (beta-lg) containing droplets of fibrils and the shear flow alignment of beta-lg fibers in dilute aqueous solutions. Polarized optical microscopy and laser scanning confocal microscopy are used to show that capillary shear flow does not affect the fibril droplet sizes in the beta-lg gels, the system behaving in this respect as a solution of compact colloidal particles under shear flow. Small-angle X-ray scattering (SAXS) on dilute aqueous solutions indicates that the fibers can be initially aligned under capillary shear, but this alignment is lost after 18 min of shear. Transmission electron microscopy experiments on the samples studied by SAXS suggest that the loss of orientation is due to a shear-induced breakup of the swollen fibril network. Dynamic and static light scattering on dilute beta-lg fibril aqueous solutions are used to show that before shear beta-lg fibrils behave as strongly interacting semiflexible polymers, while they behave as weakly interacting rods after 18 min of capillary shear.

Biophysics↗
PubMed2005

Synthesis and characterization of biocompatible, thermoresponsive ABC and ABA triblock copolymer gelators.

The synthesis of doubly thermoresponsive PPO-PMPC-PNIPAM triblock copolymer gelators by atom transfer radical polymerization using a PPO-based macroinitiator is described. Provided that the PPO block is sufficiently long, dynamic light scattering and differential scanning calorimetry studies confirm the presence of two separate thermal transitions corresponding to micellization and gelation, as expected. However, these ABC-type triblock copolymers proved to be rather inefficient gelators: free-standing gels at 37 degrees C required a triblock copolymer concentration of around 20 wt%. This gelator performance should be compared with copolymer concentrations of 6-7 wt% required for the PNIPAM-PMPC-PNIPAM triblock copolymers reported previously. Clearly, the separation of micellar self-assembly from gel network formation does not lead to enhanced gelator efficiencies, at least for this particular system. Nevertheless, there are some features of interest in the present study. In particular, close inspection of the viscosity vs temperature plot obtained for a PPO43-PMPC160-PNIPAM81 triblock copolymer revealed a local minimum in viscosity. This is consistent with intramicelle collapse of the outer PNIPAM blocks prior to the development of the intermicelle hydrophobic interactions that are a prerequisite for macroscopic gelation.

Acrylic Resins↗
PubMed2005

Nonspherical assemblies generated from polystyrene-b-poly(L-lysine) polyelectrolyte block copolymers.

This report describes the aqueous solution self-assembly of a series of polystyrene(m)-b-poly(L-lysine)n block copolymers (m = 8-10; n = 10-70). The polymers are prepared by ring-opening polymerization of epsilon-benzyloxycarbonyl-L-lysine N-carboxyanhydride using amine terminated polystyrene macroinitiators, followed by removal of the benzyloxycarbonyl side chain protecting groups. The critical micelle concentration of the block copolymers determined using the pyrene probe technique shows a parabolic dependence on peptide block length exhibiting a maximum at n = approximately 20 (m = 8) or n = approximately 60 (m = 10). The shape and size of the aggregates has been studied by dynamic and static light scattering, small-angle neutron scattering (SANS), and analytical ultracentrifugation (AUC). Surprisingly, Holtzer and Kratky analysis of the static light scattering results indicates the presence of nonspherical, presumably cylindrical objects independent of the poly(L-lysine)n block length. This is supported by SANS data, which can be fitted well by assuming cylindrical scattering objects. AUC analysis allows the molecular weight of the aggregates to be estimated as several million g/mol, corresponding to aggregation numbers of several 10s to 100s. These aggregation numbers agree with those that can be estimated from the length and diameter of the cylinders obtained from the scattering results.

Journal Article↗
PubMed2005

Block copolymers of ethylene oxide and phenyl glycidyl ether: micellization, gelation, and drug solubilization.

Three triblock copolymers of ethylene oxide and phenyl glycidyl ether, type E(m)G(n)E(m), where G = OCH2CH(CH2OC6H5) and E = OCH2CH2, were synthesized and characterized by gel-permeation chromatography, matrix-assisted laser desorption ionization time-of-flight mass spectrometry, and NMR spectroscopy. Their association properties in aqueous solution were investigated by surface tensiometry and light scattering, yielding values of the critical micelle concentration (cmc), the hydrodynamic radius, and the association number. Gel boundaries in concentrated micellar solution were investigated by tube inversion, and for one copolymer, the temperature and frequency dependence of the dynamic moduli served to confirm and extend the phase diagram and to highlight gel properties. Small-angle X-ray scattering was used to investigate gel structure. The overall aim of the work was to define a block copolymer micellar system with better solubilization capacity for poorly soluble aromatic drugs than had been achieved so far by use of block copoly(oxyalkylene)s. Judged by the solubilization of griseofulvin in aqueous solutions of the E(m)G(n)E(m) copolymers, this aim was achieved.

Antifungal Agents↗
PubMed2005

A direct comparison of one- and two-component dendritic self-assembled materials: elucidating molecular recognition pathways.

This paper compares and contrasts, for the first time, one- and two-component gelation systems that are direct structural analogues and draws conclusions about the molecular recognition pathways that underpin fibrillar self-assembly. The new one-component systems comprise l-lysine-based dendritic headgroups covalently connected to an aliphatic diamine spacer chain via an amide bond. One-component gelators with different generations of headgroup (from first to third generation) and different length spacer chains are reported. The self-assembly of these dendrimers in toluene was elucidated using thermal measurements, circular dichroism (CD) and NMR spectroscopies, scanning electron microscopy (SEM), and small-angle X-ray scattering (SAXS). The observations are compared with previous results for the analogous two-component gelation system in which the dendritic headgroups are bound to the aliphatic spacer chain noncovalently via acid-amine interactions. The one-component system is inherently a more effective gelator, partly as a consequence of the additional covalent amide groups that provide a new hydrogen bonding molecular recognition pathway, whereas the two-component analogue relies solely on intermolecular hydrogen bond interactions between the chiral dendritic headgroups. Furthermore, because these amide groups are important in the assembly process for the one-component system, the chiral information preset in the dendritic headgroups is not always transcribed into the nanoscale assembly, whereas for the two-component system, fiber formation is always accompanied by chiral ordering because the molecular recognition pathway is completely dependent on hydrogen bond interactions between well-organized chiral dendritic headgroups.

Journal Article↗
PubMed2005

Peptide mediated formation of hierarchically organized solution and solid state polymer nanostructures.

Biologically-inspired peptide sequences have been explored as auxiliaries to mediate self-assembly of synthetic macromolecules into hierarchically organized solution and solid state nanostructures. Peptide sequences inspired by the coiled coil motif and "switch" peptides, which can adopt both amphiphilic alpha-helical and beta-strand conformations, were conjugated to poly(ethylene glycol) (PEG). The solution and solid state self-assembly of these materials was investigated using a variety of spectroscopic, scattering and microscopic techniques. These experiments revealed that the folding and organization properties of the peptide sequences are retained upon conjugation of PEG and that they provide the driving force for the formation of the different nanoscale structures which were observed. The possibility of using defined peptide sequences to direct structure formation of synthetic polymers together with the potential of peptide sequences to induce a specific biological response offers interesting prospects for the development of novel self-assembled and biologically active materials.

Amino Acid Sequence↗
PubMed2004

Mechanism of the transition between lamellar and gyroid phases formed by a diblock copolymer in aqueous solution.

The mechanism of the transition from a lamellar phase to a gyroid phase in an aqueous solution of a diblock copolymer has been studied by time-resolved synchrotron small-angle X-ray scattering. The transition occurs via a metastable perforated lamellar structure. The perforations initially have liquidlike ordering before developing hexagonal packing. The transient phase of irregularly perforated layers is revealed by the development of diffuse scattering peaks, just below the Bragg peaks of the lamellar structure. The diffuse scattering is modeled by Monte Carlo simulations of perforated layers. Following the formation of perforations, Bragg peaks characteristic of a hexagonal structure signal an ordering into a hexagonal lattice (with the concomitant loss of diffuse scattering). Computer simulations based on a dynamic density functional model reproduce these features. The hexagonal perforated lamellar phase is rapidly replaced by the gyroid phase. The domain spacing of the gyroid phase is larger than that of the perforated lamellar structure. The perforated lamellar and gyroid phases coexist for a defined period. The reverse transition from gyroid to lamellae occurs directly, with no transient or metastable intermediates.

Computer Simulation↗
PubMed2004

Gelation of concentrated micellar solutions of a triblock copolymer of ethylene oxide and styrene oxide, S5E45S5.

Triblock copolymer S5E45S5 was synthesized by oxyanionic polymerization of styrene oxide initiated by a preformed difunctional polyethylene glycol. Here E denotes OCH2CH2, S denotes OCH2CH(C6H5), and the subscripts denote number-average block lengths in repeat units. Previous work on the closely related copolymer S4E45S4 indicated that micelles would form in aqueous solutions of copolymer S5E45S5, and that they would undergo transient intermicellar bridging. Dynamic light scattering was used to confirm this. Rheometry and small-angle X-ray scattering were used to explore gel boundaries, structures, and properties. At moderate copolymer concentrations (14 and 20 wt %) measurements of the dynamic shear moduli indicated the formation of low-modulus soft gels attributed to spherical micelles forming transient networks. A region of low storage modulus at c approximately 30 wt % preceded a change to hard gel. A 40 wt % hard gel was disordered, while at higher concentrations (49 and 60 wt %) the micelles packed into hexagonal structures with high values of the storage modulus (G' approximately 10 kPa at 25 degrees C and 1 Hz).

Journal Article↗
PubMedDate not supplied

Nanoscale structure of poly(ethylene glycol) hybrid block copolymers containing amphiphilic beta-strand peptide sequences.

This paper discusses the solid state and melt nanoscale structure of a series of novel poly(ethylene glycol) (PEG) hybrid di- and triblock copolymers, which contain amphiphilic beta-strand peptide sequences. The block copolymers have been prepared via solid-phase synthesis, affording perfectly monodisperse peptide segments with a precisely defined alpha-amino acid sequence. Attenuated total reflection Fourier transform infrared spectroscopy and X-ray scattering experiments indicate that the self-assembly properties of the peptide sequences are retained upon conjugation to PEG and mediate the formation of an ordered superstructure consisting of alternating PEG layers and peptide domains with an highly organized antiparallel beta-sheet structure. The results suggest that combination of biological structural motifs with synthetic polymers may be a versatile strategy for the development of novel self-assembled materials with complex internal structures and the potential to interface with biology.

Amino Acid Sequence↗