Biomedical subjects

Valtencir Zucolotto

Publications and source records attributed to Valtencir Zucolotto.

11 recordsLinked to original sources

PubMed2006

Physicochemical properties and sensing ability of metallophthalocyanines/chitosan nanocomposites.

Electroactive nanostructured films of chitosan (Ch) and tetrasulfonated metallophthalocyanines containing nickel (NiTsPc), copper (CuTsPc), and iron (FeTsPc) were produced via the electrostatic layer-by-layer (LbL) technique. The multilayer formation was monitored with UV-vis spectroscopy by measuring the increase of the Q-band absorption from metallophthalocyanines. Results from transmission and reflection infrared spectroscopy suggested specific interactions between SO(3)(-) groups from metallophthalocyanines and NH(3)(+) from chitosan. The electroactive multilayered films assembled onto an ITO electrode were characterized by cyclic voltammetry, with Ch/NiTsPc films showing higher stability and well-defined voltammograms displaying reversible redox peaks at 0.80 and 0.75 V. These films could be used to detect dopamine (DA) in the concentration range from 5.0 x 10(-6) to 1.5 x 10(-4) mol L(-1). Also, ITO-(Ch/NiTsPc)(n)() electrodes showed higher electrocatalytic activity for DA oxidation when compared with a bare ITO electrode. On the other hand, only the Ch/FeTsPc and Ch/CuTsPc modified electrodes could distinguish between DA and ascorbic acid. These results demonstrate that versatile electrodes can be prepared by incorporation of different metallophthalocyanine molecules in LbL films, which may be used in bioanalytical applications.

Journal Article↗

PubMed2006

Fabrication of phytic acid sensor based on mixed phytase-lipid Langmuir-Blodgett films.

This paper reports the surface activity of phytase at the air-water interface, its interaction with lipid monolayers, and the construction of a new phytic acid biosensor on the basis of the Langmuir-Blodgett (LB) technique. Phytase was inserted in the subphase solution of dipalmitoylphosphatidylglycerol (DPPG) Langmuir monolayers, and its incorporation to the air-water interface was monitored with surface pressure measurements. Phytase was able to incorporate into DPPG monolayers even at high surface pressures, ca. 30 mN/m, under controlled ionic strength, pH, and temperature. Mixed Langmuir monolayers of phytase and DPPG were characterized by surface pressure-area and surface potential-area isotherms, and the presence of the enzyme provided an expansion in the monolayers (when compared to the pure lipid at the interface). The enzyme incorporation also led to significant changes in the equilibrium surface compressibility (in-plane elasticity), especially in liquid-expanded and liquid-condensed regions. The dynamic surface elasticity for phytase-containing interfaces was investigated using harmonic oscillation and axisymmetric drop shape analysis. The insertion of the enzyme at DPPG monolayers caused an increase in the dynamic surface elasticity at 30 mN m(-)(1), indicating a strong interaction between the enzyme and lipid molecules at a high-surface packing. Langmuir-Blodgett (LB) films containing 35 layers of mixed phytase-DPPG were characterized by ultraviolet-visible and fluorescence spectroscopy and crystal quartz microbalance nanogravimetry. The ability in detecting phytic acid was studied with voltammetric measurements.

6-Phytase↗

PubMed2006

Enhanced charge transport and incorporation of redox mediators in layer-by-layer films containing PAMAM-encapsulated gold nanoparticles.

In this work, we exploit the molecular engineering capability of the layer-by-layer (LbL) method to immobilize layers of gold nanoparticles on indium tin oxide (ITO) substrates, which exhibit enhanced charge transfer and may incorporate mediating redox substances. Polyamidoamine (PAMAM generation 4) dendrimers were used as template/stabilizers for Au nanoparticle growth, with PAMAM-Au nanoparticles serving as cationic polyelectrolytes to produce LbL films with poly(vinylsulfonic acid) (PVS). The cyclic voltammetry (CV) of ITO-PVS/PAMAM-Au electrodes in sulfuric acid presented a redox pair attributed to Au surface oxide formation. The maximum kinetics adsorption is first-order, 95% of the current being achieved after only 5 min of adsorption. Electron hopping can be considered as the charge transport mechanism between the PVS/PAMAM-Au layers within the LbL films. This charge transport was faster than that for nonmodified electrodes, shown by employing hexacyanoferrate(III) as the surface reaction marker. Because the enhanced charge transport may be exploited in biosensors requiring redox mediators, we demonstrate the formation of Prussian blue (PB) around the Au nanoparticles as a proof of principle. PAMAM-Au@PB could be easily prepared by electrodeposition, following the ITO-PVS/ PAMAM-Au LbL film preparation procedure. Furthermore, the coverage of Au nanoparticles by PB may be controlled by monitoring the oxidation current.

Journal Article↗

PubMed2006

Synthesis of core-shell Au@polypyrrole nanocomposite using a dendrimer-template approach.

Conducting polymeric nanostructures have been reported recently, which were produced from polypyrrole (PPy), including hollow nanocapsules, nanofibers, nanoporous membranes, nanowires, and nanofilms. In most cases, new synthetic routes were used aimed at controlling specific properties of these conducting nanostructures at the molecular level. In this communication we present a new chemical route to synthesize polypyrrole-based nanocomposites, in which polyamidoamine (PAMAM) dendrimers encapsulating Au nanoparticles are used as template. The two-step synthesis comprises the reduction of Au nanoparticles inside PAMAM molecules followed by PPy polymerization around the PAMAM-Au nanoparticles. The structure of the core-shell PAMAM-gold@polypyrrole nanospheres comprises a 40 nm PPy shell enclosing a core of 3 nm gold nanoparticles, as revealed by Transmission Electronic Microscopy (TEM). This new, environmentally-friendly approach may be suitable to produce hybrid nanomaterials for applications in catalysis, batteries, sensors, and micro/nanoelectronic devices.

Dendrimers↗

PubMed2005

Optical storage and surface-relief gratings in azobenzene-containing nanostructured films.

This paper brings an overview of photoisomerization-derived properties in azobenzene-containing nanostructured films produced with the Langmuir-Blodgett (LB) and layer-by-layer (LbL) methods. Emphasis was placed on the optical storage and formation of surface-relief gratings (SRGs), where the distinctive properties of the nanostructured films were highlighted. For optical storage, in particular, a discussion was made of the higher birefringence induced in LB films from azopolymers due to their organized nature, and of the strong effects from ionic interactions on the photoisomerization of azochromophores in LbL films. The molecular-level control of film properties in the LbL films is described as being responsible for the varied behavior observed in the photoinscription of SRGs, which may involve considerable level of photodegradation depending on the film fabrication conditions and materials used.

Azo Compounds↗

PubMed2005

Catechol biosensing using a nanostructured layer-by-layer film containing Cl-catechol 1,2-dioxygenase.

The detection of aromatic compounds from pesticides and industrial wastewater has become of great interest, since these compounds withstand chemical oxidation and biological degradation, accumulating in the environment. In this work, a highly sensitive biosensor for detecting catechol was obtained with the immobilization of Cl-catechol 1,2-dioxygenase (CCD) in nanostructured films. CCD layers were alternated with poly(amidoamine) generation 4 (PAMAM G4) dendrimer using the electrostatic layer-by-layer (LbL) technique. Circular dichroism (CD) measurements indicated that the immobilized CCD preserved the same conformation as in solution. The thickness of the very first CCD layers in the LbL films was estimated at ca. 3.6 nm, as revealed by surface plasmon resonance (SPR). PAMAM/CCD 10-bilayer films were employed in detecting diluted catechol solutions using either an optical or electrical approach. Due to the mild immobilization conditions employed, especially regarding the pH and ionic strength of the dipping solutions, CCD remained active in the films for periods longer than 3 weeks. The optical detection comprised absorption experiments in which the formation of cis-cis muconic acid, resulting from the reaction between CCD and catechol, was monitored by measuring the absorbance at 260 nm after film immersion in catechol solutions. The electrical detection was carried out using LbL films deposited onto gold-interdigitated electrodes immersed in aqueous solutions at different catechol concentrations. Using impedance spectroscopy in a broad frequency range (1Hz-1kHz), we could detect catechol in solutions at concentrations as low as 10(-10) M.

Adsorption↗

PubMed2005

Immobilization of humic acid in nanostructured layer-by-layer films for sensing applications.

Humic acids (HAs), naturally occurring biomacromolecules, were incorporated into nanostructured polymeric films using the layer-by-layer (LbL) technique, in which HA layers were alternated with layers of poly(allylamine hydrochloride) (PAH). Atomic force microscopy (AFM) revealed very smooth films, with mean roughness varying from 0.89 to 1.19 nm for films containing 5 and 15 PAH/HA bilayers, respectively. The films displayed electroactivity, with the presence of only one reduction peak at ca. 0.675 V (vs Ag/AgCl). Such a well-defined electroactivity allowed the films to be used as highly sensitive pesticide sensors, with detection of pentachlorophenol (PCP) in solutions at concentrations as low as 10(-9) mol L(-1).

Biosensing Techniques↗

PubMed2005

Morphology characterization of layer-by-layer films from PAH/MA-co-DR13: the role of film thickness.

We report on the use of dynamic scale theory and fractal analyses in the study of distinct growth stages of layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and a side-chain-substituted azobenzene copolymer (Ma-co-DR13). The LBL films were adsorbed on glass substrates and characterized with atomic force microscopy with the Ma-co-DR13 at the top layer. The granular morphology exhibited by the films allowed the observation of the growth process inside and outside the grains. The growth outside the grains was found to follow the Kardar-Parisi-Zhang model, with fractal dimensions of ca. 2.6. One could expect that inside the grains the morphology would be close to a Euclidian surface with fractal dimension of ca. 2 for any growth stage. The latter, however, was observed only for thicker films containing more than 10 bilayers. For thinner films the morphology was well described by a self-affine fractal. Such dependence of the growth behavior with the film thickness is associated with a more complete coverage of adsorption sites in thicker films due to diffusion of polymer molecules.

Azo Compounds↗

PubMed2005

Molecular-level control of the photoluminescence from PPV nanostructured films.

The fabrication of varied molecular architectures in layer-by-layer (LbL) films is exploited to control the photoluminescence (PL) of poly(p-phenylene vinylene) (PPV) in an unprecedented way. This was achieved by controlling the Förster energy transfer between PPV layers (donors) and layers of a commercial azodye, Brilliant Yellow (BY) (acceptors). Energy transfer was controlled by inserting spacer layers of inert polymers between PPV and BY layers and by photoaligning the BY molecules via trans-cis-trans isomerization. The PPV/BY LbL films displayed polarized PL whose intensity could be varied almost continuously by changing the time of photoalignment, which was carried out by impinging a linearly polarized laser light simultaneously to the PL experiments. For PPV/BY films with no spacer layers, PL was completely quenched, but its intensity increased with the number of spacing layers. Further increase in PL was obtained by photoaligning the BY molecules perpendicularly to the PPV molecules. This minimizes energy transfer, since Förster processes are directional, dipole-dependent resonant transfers. Energy transfer is also controlled by imparting a preferential orientation of the PPV chains on PPV/BY LbL films deposited onto flexible Teflon substrates that may be stretched.

Journal Article↗

PubMed2004

Photoinduced phenomena in layer-by-layer films of poly(allylamine hydrochloride) and Brilliant Yellow azodye.

The nanoscale interactions between adjacent layers of layer-by-layer (LBL) films from poly(allylamine hydrochloride) (PAH) and azodye Brilliant Yellow (BY) have been investigated, with the films employed for optical storage and the formation of surface-relief gratings. Using Fourier transform infrared spectroscopy, we identified interactions involving SO3- groups from BY and NH+ groups from PAH. These electrostatic interactions were responsible for the slow kinetics of writing in the optical storage experiments, due to a tendency to hinder photoisomerization and the subsequent reorientation of the azochromophores. The photoinduced birefringence did not saturate after one hour of exposure to the writing laser, whereas in azopolymer films, saturation is normally reached within a few minutes. On the other hand, the presence of such interactions prevented thermal relaxation of the chromophores after the writing laser was switched off, leading to a very stable written pattern. Moreover, the nanoscale interactions promoted mass transport for photoinscription of surface-relief gratings on PAH/BY LBL films, with the azochromophores being able to drag the inert PAH chains when undergoing the trans-cis-trans photoisomerization cycles. A low level of chromophore degradation was involved in the SRG photoinscription, which was confirmed with micro-Raman and fluorescence spectroscopies.

Allylamine↗

PubMed2002

Layer-by-layer nanostructured hybrid films of polyaniline and vanadium oxide.

Supramolecular structures of polyaniline (PANI) and vanadium oxide (V2O5) have been assembled via the electrostatic layer-by-layer (ELBL) technique. Strong ionic interactions and H-bonding impart unique features to the ELBL films, which are distinct from cast films obtained with the same materials. The interactions were manifested in UV-vis and Fourier transform infrared spectroscopy data. They are enhanced by the intimate contact between the components, as the films are molecularly thin, with 25 A per PANI/V2O5 bilayer.

Aniline Compounds↗