PubMed Health⌕ Search

Biomedical subjects

Vasif Hasirci

Publications and source records attributed to Vasif Hasirci.

10 recordsLinked to original sources

UV-induced drug release from photoactive REV sensitized by suprofen.

In order to achieve local administration of drugs, calcein (CAL) encapsulated reverse phase evaporation vesicles (REV) carrying photoactive destabilization agent suprofen (SPF) in the lipid bilayer were prepared. Effect of both UV-A and UV-B photoactivation of liposomal membrane incorporated SPF on the destabilization of the liposome bilayer and the release of encapsulated CAL was investigated. Standard REV of phosphatidylcholine (PC):cholesterol (CHOL) in 7:3 molar ratio, and photoactive REV of PC:CHOL:SPF, and DPPC:CHOL:SPF in 7:3:3 molar ratio were prepared. CAL encapsulation efficiency (EE (%)) and in situ release was studied. SPF incorporation in the PC REV membrane led to approximately 5% increase in the EE (34%) in comparison to standard REV (29%). EE decreased (21%) when DPPC was used to replace PC. Exposure to UV-B caused the highest CAL release. The lowest release was from the unexposed REV. DPPC led to a higher liposomal membrane stability (lower CAL release) than PC. A linear relationship was observed between UV-B exposure duration and REV permeability. This study revealed that membrane destabilization of SPF incorporated REV was best achieved upon photoactivation of the membrane-localized SPF by a 40 min exposure to UV-B.

Delayed-Action Preparations↗

Determination of binary pesticide mixtures by an acetylcholinesterase-choline oxidase biosensor.

In this study, acetylcholinesterase (AChE) and choline oxidase (ChO) were co-immobilized on poly(2-hydroxyethyl methacrylate) (pHEMA) membranes to construct a biosensor for the detection of anti-cholinesterase compounds. pHEMA membranes were prepared with the addition of SnCl(4) to achieve the desired porosity. Immobilization of the enzymes was done by surface attachment via epichlorohydrin (Epi) and Cibacron Blue F3G-A (CB) activation. Enzyme immobilized membrane was used in the detection of anti-cholinesterase activity of aldicarb (AS), carbofuran (CF) and carbaryl (CL), as well as two mixtures, (AS+CF) and (AS+CL). The total anti-cholinesterase activity of binary pesticide mixtures was found to be lower than the sum of the individual inhibition values.

Acetylcholinesterase↗

Antihyperalgesic effect of simultaneously released hydromorphone and bupivacaine from polymer fibers in the rat chronic constriction injury model.

We aimed to evaluate the antihyperalgesic efficacy of a combination of hydromorphone (HM) and bupivacaine (BP) delivered via controlled release from a biodegradable cylindrical rod. In vivo studies were performed using a rat model of thermal hyperalgesia induced by chronic constriction injury (CCI) of the sciatic nerve with loose ligatures. Poly(lactic-co-glycolic acid) (PLGA) rods (10 mm length, 1 mm diameter) loaded with HM (5 mg per rod), BP (5 mg per rod) or no drug (placebo) were implanted subcutaneously, in single or dual pairs, adjacent to the constriction injury, immediately after nerve ligation. We evaluated the efficacy of two dose levels for each drug, alone or in combination, in attenuating thermal hyperesthesia over a period of 12 days according to a prevention protocol. Plasma levels of drugs released from the rods and also released in an in vitro simulation were evaluated. In vitro studies demonstrated that drug release is maintained for at least 10 days. HM (5 mg) alone and BP (5 mg) alone did not attenuate hyperalgesia. Their combination provided a significant increase in the paw withdrawal latency as compared to single agents or placebo. When the dose in each group was doubled, implanting four rods, significant attenuation of hyperalgesia was observed. Analyses of rods retrieved after termination of experiments (after 12 days) revealed 30% residual HM and 70% residual BP content. Prolonged delivery of HM and BP alone or in combination via locally applied PLGA rods may offer a feasible alternative to provide long-lasting analgesia.

Analgesics, Opioid↗

Solid-phase enzyme modification via affinity chromatography.

In the present study antileukemic enzyme L-asparaginase (ASNase) and catalase (as a model enzyme) were modified in solid-phase with activated polyethylene glycol (PEG(2)) by using ligand-immobilized affinity column systems L-asparagine-Sepharose CL-4B and Procion red-Sepharose CL-4B, respectively. Studies on change of specific activity with modification time showed negligible differences between batches of modified catalase. Modification of ASNase for 1 h resulted in 50.2% recovery of the specific activity and the attachment of 69 molecules of PEG(2) per molecule of ASNase forming 'PEGylated ASNase'. Sequential modification of ASNase by activated PEG and heparin resulted in coupling of about nine molecules of heparin per molecule of PEGylated ASNase. Intravenous (i.v.) administration of PEG(2)-modified ASNase showed prolonged presence in the blood circulation and no adverse effects or symptoms of anaphylaxis were observed in presensitized mice.

Animals↗

Poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) based tissue engineering matrices.

In this study, the aim was to produce tissue-engineered bone using osteoblasts and a novel matrix material, poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV). In order to prepare a porous PHBV matrix with uniform pore size, sucrose crystals were loaded in the foam and then leached leaving pores behind. The surface of the PHBV matrix was treated with rf-oxygen plasma to increase the surface hydrophilicity. SEM examination of the PHBV matrices was carried out. Stability of PHBV foams in aqueous media was studied. The pH decrease is an indication of the degradation extent. The weight and density were unchanged for a period of 120 days but then a significant decrease was observed for the rest of the study. Osteoblast cells were then isolated from rat bone marrow and seeded onto PHBV matrices. The metabolization and proliferation on the foams was determined with MTS assay which showed that osteoblasts proliferated on PHBV. It was also found that cells proliferated better on large pore size foams (300-500 microm) than on the small pore size foams (75-300 microm). Production of ALP was measured spectrophotometrically. The present study demonstrated that PHBV matrices are suitable substrates for osteoblast proliferation and differentiation.

Journal Article↗

Construction of an acetylcholinesterase-choline oxidase biosensor for aldicarb determination.

In this study, acetylcholinesterase and choline oxidase were co-immobilized on poly(2-hydroxyethyl methacrylate) membranes and the change in oxygen consumption upon aldicarb introduction was measured. Immobilization of the enzymes was achieved either by entrapment or by surface attachment via a hybrid immobilization method including epichlorohydrin and Cibacron Blue F36A activation. Immobilized enzymes had a long-storage stability (only 15% activity decrease in 2 months in wet storage and no activity loss in dry storage). Aldicarb detection studies showed that a linear working range of 10-500 and 10-250 ppb aldicarb could be achieved by entrapped and surface immobilized enzymes, respectively. Enzymes immobilized on membrane surfaces responded to aldicarb presence more quickly than entrapped enzymes. Aldicarb concentrations as low as 23 and 12 ppb could be detected by entrapped and surface immobilized enzymes, respectively, in 25 min.

Acetylcholinesterase↗

Chondroitin sulfate-coated polyhydroxyethyl methacrylate membrane prevents adhesion in full-thickness tendon tears of rabbits.

Polyhydroxyethyl methacrylate (pHEMA) membranes coated on one side with chondroitin sulfate (CS) were used to block adhesion physically and to reduce friction between healing flexor tendons and the surrounding tissue in rabbit forepaws after surgical repair. Digits with pHEMA-only, standard tendon sheath repair, and with no sheath repair were the controls. Over 12 weeks the CS-coated membranes were evaluated for joint flexion, adhesion limitation, and tendon healing progress. The membranes initially allowed for better flexion (ie, for 6 weeks), but their relative superior effectiveness faded afterward. Histology showed that adhesions were less severe and healing was better in the CS-pHEMA membranes at 3 and 6 weeks. If further studies determine precise amounts or thicknesses of CS coats that will maximize its healing properties, CS-pHEMA should prove useful in clinical settings in which restoration of tendon sheath integrity with a minimum of adhesions is not possible.

Animals↗

Assessment of biodegradable controlled release rod systems for pain relief applications.

Control of chronic, severe pain is a difficult and important clinical problem for most patients, especially those with cancer. Although current applications are insufficient for a satisfactory solution to this problem, the rate of disease incidence is increasing worldwide, thus making the problem more apparent. Based on this fact, this study was designed with the ultimate goal of formulating a controlled release system of pain relievers, mainly opioids, for the local treatment of pain to achieve satisfactory, fast, and less side effect-related relief and to provide a better life status for chronic pain patients. Two copolymers of a biodegradable polymer poly(L-lactide-co-glycolide) (PLGA) were used to prepare an implantable rod type drug release system containing either an analgesic or anesthetic type of pain reliever. In vitro drug release kinetics of these systems were studied. It was observed that release from PLGA 85 : 15 was more zero-order than it was from PLGA 50 : 50. A zero-order release rate was obtained for codeine, hydromorphone, and bupivacaine from PLGA (85 : 15) rods. They, however, were released from PLGA (50 : 50) rods with Higuchi kinetics. The drug solubility was also influential on release rate, as shown by the zero-order morphine release from PLGA (50 : 50) rods. Scanning electron micrographs (SEMs) of the monolithic rods revealed erosion of the rods and the removal of drug crystals from the rod structure.

Analgesics, Opioid↗

In vivo tissue engineering of bone using poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) and collagen scaffolds.

Porous poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) and calcium phosphate-loaded collagen (CaP-Gelfix) foams were seeded with rat bone marrow stromal cells and implanted into defects created in rat femurs to study in vivo bone formation and to test their suitability for use in bone tissue engineering. At 3 and 6 weeks, new bone formation was evaluated by macroscopy, radiography, dual-energy X-ray absorptiometry (DEXA), and quantitative computerized tomography (QCT). Atomic contents of the implants were further assessed by QCT. Some initial inflammation that significantly decreased with time was observed in the CaP-Gelfix group. PHBV inflammation was minimal at all stages. Fibrous tissue formation in the CaP-Gelfix group was more than in the PHBV group. Both cell-loaded and cell-free PHBV matrices elicited minimal fibrous tissue formation during the 6-week implantation duration. Macroscopic and radiological studies demonstrated better healing with PHBV matrices than with CaP-Gelfix in 3 weeks. Histologically, fibrous connective tissue establishment and inflammation scores were significantly higher in the CaP-Gelfix group when compared with the PHBV group at both time intervals. At 6 weeks, however, the extent of healing was almost the same with both implants. DEXA and QCT results indicated that there was an increase in bone mineral density in both PHBV and CaP-Gelfix implants at the end of 6 weeks. This study suggests that even though PHBV and CaP-Gelfix have different bulk and surface chemistries they both are promising cell carriers that may be suitable for use in bone tissue engineering.

Animals↗