PubMed Health⌕ Search

Biomedical subjects

Victor S Lamzin

Publications and source records attributed to Victor S Lamzin.

At least 19 recordsLinked to original sources
PubMed2006

Assessment of automatic ligand building in ARP/wARP.

The efficiency of the ligand-building module of ARP/wARP version 6.1 has been assessed through extensive tests on a large variety of protein-ligand complexes from the PDB, as available from the Uppsala Electron Density Server. Ligand building in ARP/wARP involves two main steps: automatic identification of the location of the ligand and the actual construction of its atomic model. The first step is most successful for large ligands. The second step, ligand construction, is more powerful with X-ray data at high resolution and ligands of small to medium size. Both steps are successful for ligands with low to moderate atomic displacement parameters. The results highlight the strengths and weaknesses of both the method of ligand building and the large-scale validation procedure and help to identify means of further improvement.

Algorithms↗
PubMed2006

Automated detection and centring of cryocooled protein crystals.

A novel method is presented for the automated recognition of cryocooled macromolecular crystals. The method uses several texture-based image-processing algorithms for automated crystal centring, which are able to cope with a variety of crystal morphologies and illumination conditions. The results combined from different algorithms, together with their estimated standard uncertainties, provide a robust determination of the crystal location and allow an internal assessment of their reliability. The method was coded within the software XREC and showed a good performance on 104 sets of images from various beamlines.

Algorithms↗
PubMed2006

Purification, crystallization and preliminary X-ray study of the fungal laccase from Cerrena maxima.

Laccases are members of the blue multi-copper oxidase family that oxidize substrate molecules by accepting electrons at a mononuclear copper centre and transferring them to a trinuclear centre. Dioxygen binds to the trinuclear centre and, following the transfer of four electrons, is reduced to two molecules of water. Crystals of the laccase from Cerrena maxima have been obtained and X-ray data were collected to 1.9 A resolution using synchrotron radiation. A preliminary analysis shows that the enzyme has the typical laccase structure and several carbohydrate sites have been identified. The carbohydrate chains appear to be involved in stabilization of the intermolecular contacts in the crystal structure, thus promoting the formation of well ordered crystals of the enzyme. Here, the results of an X-ray crystallographic study on the laccase from the fungus Cerrena maxima are reported. Crystals that diffract well to a resolution of at least 1.9 A (R factor = 18.953%; R(free) = 23.835; r.m.s.d. bond lengths, 0.06 A; r.m.s.d. bond angles, 1.07 degrees) have been obtained despite the presence of glycan moieties. The overall spatial organization of C. maxima laccase and the structure of its copper-containing active centre have been determined by the molecular-replacement method using the laccase from Trametes versicolor (Piontek et al., 2002) as a structural template. In addition, four glycan-binding sites were identified and the 1.9 A X-ray data were used to determine the previously unknown primary structure of this protein. The identity (calculated from sequence alignment) between the C. maxima laccase and the T. versicolor laccase is about 87%. Tyr196 and Tyr372 show significant extra density at the ortho positions and this has been interpreted in terms of NO(2) substituents.

Basidiomycota↗
PubMed2006

X-ray structural studies of the fungal laccase from Cerrena maxima.

Laccases are members of the blue multi-copper oxidase family. These enzymes oxidize substrate molecules by accepting electrons at a mononuclear copper centre and transferring them to a trinuclear centre. Dioxygen binds to the trinuclear centre and following the transfer of four electrons is reduced to two molecules of water. The X-ray structure of a laccase from Cerrena maxima has been elucidated at 1.9 A resolution using synchrotron data and the molecular replacement technique. The final refinement coefficients are Rcryst = 16.8% and Rfree = 23.0%, with root mean square deviations on bond lengths and bond angles of 0.015 A and 1.51 degrees , respectively. The type 1 copper centre has an isoleucine residue at the axial position and the "resting" state of the trinuclear centre comprises a single oxygen (OH) moiety asymmetrically disposed between the two type 3 copper ions and a water molecule attached to the type 2 ion. Several carbohydrate binding sites have been identified and the glycan chains appear to promote the formation of well-ordered crystals. Two tyrosine residues near the protein surface have been found in a nitrated state.

Binding Sites↗
PubMed2006

How to avoid premature decay of your macromolecular crystal: a quick soak for long life.

Radiation damage to biological samples is currently one of the major limiting factors in macromolecular X-ray crystallography, since it severely and irreversibly affects the quality of the data that can be obtained from a diffraction experiment. However, radiation damage can effectively be reduced by utilizing the electron and radical scavenging potential of certain small-molecule compounds. We propose an approach to protect macromolecular crystals prior to data collection by quick soaking with scavengers. This, in favorable cases, can more than double crystal lifetime in the X-ray beam. The approach has the potential to yield diffraction data of superior quality and hence to increase the amount of high-quality diffraction data and of structural information attainable from a single crystal.

Animals↗
PubMed2005

Extraction of functional motion in trypsin crystal structures.

The analysis of anisotropic atomic displacement parameters for the direct extraction of functionally relevant motion from X-ray crystal structures of Fusarium oxysporum trypsin is presented. Several atomic resolution structures complexed with inhibitors or substrates and determined at different pH values and temperatures were investigated. The analysis revealed a breathing-like molecular motion conserved across trypsin structures from two organisms and three different crystal forms. Directional motion was observed suggesting a change of the width of the substrate-binding cleft and a change in the length of the specificity pocket. The differences in direction of motion across the structures are dependent on the mode of substrate or inhibitor binding and the chemical environment around the active-site residues. Together with the occurrence of multiple-residue conformers, they reflect spatial rearrangement throughout the deacylation pathway.

Anisotropy↗
PubMed2005

Auto-rickshaw: an automated crystal structure determination platform as an efficient tool for the validation of an X-ray diffraction experiment.

The EMBL-Hamburg Automated Crystal Structure Determination Platform is a system that combines a number of existing macromolecular crystallographic computer programs and several decision-makers into a software pipeline for automated and efficient crystal structure determination. The pipeline can be invoked as soon as X-ray data from derivatized protein crystals have been collected and processed. It is controlled by a web-based graphical user interface for data and parameter input, and for monitoring the progress of structure determination. A large number of possible structure-solution paths are encoded in the system and the optimal path is selected by the decision-makers as the structure solution evolves. The processes have been optimized for speed so that the pipeline can be used effectively for validating the X-ray experiment at a synchrotron beamline.

Crystallography, X-Ray↗
PubMed2004

Towards complete validated models in the next generation of ARP/wARP.

The design of a new versatile control system that will underlie future releases of the automated model-building package ARP/wARP is presented. A sophisticated expert system is under development that will transform ARP/wARP from a very useful model-building aid to a truly automated package capable of delivering complete, well refined and validated models comparable in quality to the result of intensive manual checking, rebuilding, hypothesis testing, refinement and validation cycles of an experienced crystallographer. In addition to the presentation of this control system, recent advances, ideas and future plans for improving the current model-building algorithms, especially for completing partially built models, are presented. Furthermore, a concept for integrating validation routines into the iterative model-building process is also presented.

Algorithms↗
PubMed2004

The crystal structure of glutamyl endopeptidase from Bacillus intermedius reveals a structural link between zymogen activation and charge compensation.

Extracellular glutamyl endopeptidase from Bacillus intermedius (BIEP) is a chymotrypsin-like serine protease which cleaves the peptide bond on the carboxyl side of glutamic acid. Its three-dimensional structure was determined for C222(1) and C2 crystal forms of BIEP to 1.5 and 1.75 A resolution, respectively. The topology of BIEP diverges from the most common chymotrypsin architecture, because one of the domains consists of a beta-sandwich consisting of two antiparallel beta-sheets and two helices. In the C2 crystals, a 2-methyl-2,4-pentanediol (MPD) molecule was found in the substrate binding site, mimicking a glutamic acid. This enabled the identification of the residues involved in the substrate recognition. The presence of the MPD molecule causes a change in the active site; the interaction between two catalytic residues (His47 and Ser171) is disrupted. The N-terminal end of the enzyme is involved in the formation of the substrate binding pocket. This indicates a direct relation between zymogen activation and substrate charge compensation.

Amino Acid Sequence↗
PubMed2003

Breaking good resolutions with ARP/wARP.

New procedures are outlined that enable ARP/wARP to automatically build protein models with diffraction data extending to about 2.5 A. An overview of ongoing research is given and possible future advances are discussed.

Algorithms↗
PubMed2003

Trypsin revisited: crystallography AT (SUB) atomic resolution and quantum chemistry revealing details of catalysis.

A series of crystal structures of trypsin, containing either an autoproteolytic cleaved peptide fragment or a covalently bound inhibitor, were determined at atomic and ultra-high resolution and subjected to ab initio quantum chemical calculations and multipole refinement. Quantum chemical calculations reproduced the observed active site crystal structure with severe deviations from standard stereochemistry and indicated the protonation state of the catalytic residues. Multipole refinement directly revealed the charge distribution in the active site and proved the validity of the ab initio calculations. The combined results confirmed the catalytic function of the active site residues and the two water molecules acting as the nucleophile and the proton donor. The crystal structures represent snapshots from the reaction pathway, close to a tetrahedral intermediate. The de-acylation of trypsin then occurs in true SN2 fashion.

Binding Sites↗
PubMed2003

Crystallization and preliminary X-ray analysis of a four-copper laccase from Coriolus hirsutus.

Laccase from the fungus Coriolus hirsutus has been purified. Crystals of the enzyme suitable for X-ray structure analysis have been obtained under optimized crystallization conditions using polyethylene glycol as a precipitant. The crystals belong to space group P2(1)2(1)2(1), with unit-cell parameters a = 50.65, b = 74.01, c = 124.83 A, and contain 40% solvent and a single molecule of laccase in the asymmetric unit. X-ray data were collected to 1.85 A at the copper edge and the four copper sites have been located from the anomalous signal. The obtained SAD phases with subsequent density modification produced a promising initial electron-density map.

Basidiomycota↗
PubMed2002

Advantages of high-resolution phasing: MAD to atomic resolution.

The structure of the endoglucanase A from Clostridium thermocellum CelA was re-solved by three-wavelength MAD. Experimental phases were obtained in the resolution range 25-1.0 A. Various structure-solution approaches were tested in order to quantify the contribution of each wavelength. Two-wavelength MAD phasing was sufficient to obtain excellent experimental phases. SAD at the remote wavelength also resulted in interpretable maps. The three-wavelength MAD electron-density map was of excellent quality: for parts of the structure, atom types and bond types could be easily assigned. Double bonds in peptide links and side chains could be located owing to their increased electron density indicating their pi character. Comparison with a previously determined structure of CelA at 1.65 A showed that, apart from a few additional multiple conformers and differently oriented side chains, major differences occur at the protein-solvent interface. A complete additional solvent shell could be observed and the inner shells have been completed. The high accuracy of the structure allowed unambiguous assignment of the protonation state for the active-site catalytic carboxylates.

Cellulase↗
PubMed2002

Atomic resolution data reveal flexibility in the structure of RNase Sa.

Ribonuclease from Streptomyces aureofaciens, the bacterial source for the industrial production of chlorotetracycline, is a guanylate endoribonuclease (RNase Sa; EC 3.1.27.3) which hydrolyses the phosphodiester bonds of single-stranded RNA at the 3'-side of guanosine nucleotides with high specificity. The structure of the enzyme was previously refined at atomic resolution (1.2 A) using room-temperature data. Here, the RNase Sa structure refined against 1.0 A data collected at cryogenic temperature is reported. There are two surface loops in molecule A and one in molecule B for which two main-chain conformations are modelled: these loops contain active-site residues. The separation for most of the corresponding main-chain atoms in the two conformations is about 0.8 A, with a maximum of 2.5 A. The two regions of dual conformation represent the most important differences in comparison with the structure determined at room temperature, where the corresponding loops have one conformation only but the largest degree of anisotropy. The flexibility of the loops observed in the structure of RNase Sa is directly linked to the need for the active site to interact productively with substrates and/or inhibitors.

Catalytic Domain↗
PubMed2002

ARP/wARP's model-building algorithms. I. The main chain.

Algorithms underlying the automatic model-building functionality of the ARP/wARP software suite are presented. Finding the most likely set of Calpha atoms from a given set of atoms is formulated as a constrained integer programming problem. The objective function is a density-weighted score for the match between observed and expected chain conformation. Graph-search algorithms are presented that find solutions to this problem in an efficient manner.

Algorithms↗
PubMed2002

Domain closure, substrate specificity and catalysis of D-lactate dehydrogenase from Lactobacillus bulgaricus.

NAD-dependent Lactobacillus bulgaricus D-Lactate dehydrogenase (D-LDHb) catalyses the reversible conversion of pyruvate into D-lactate. Crystals of D-LDHb complexed with NADH were grown and X-ray data collected to 2.2 A. The structure of D-LDHb was solved by molecular replacement using the dimeric Lactobacillus helveticus D-LDH as a model and was refined to an R-factor of 20.7%. The two subunits of the enzyme display strong asymmetry due to different crystal environments. The opening angles of the two catalytic domains with respect to the core coenzyme binding domains differ by 16 degrees. Subunit A is in an "open" conformation typical for a dehydrogenase apo enzyme and subunit B is "closed". The NADH-binding site in subunit A is only 30% occupied, while in subunit B it is fully occupied and there is a sulphate ion in the substrate-binding pocket. A pyruvate molecule has been modelled in the active site and its orientation is in agreement with existing kinetic and structural data. On domain closure, a cluster of hydrophobic residues packs tightly around the methyl group of the modelled pyruvate molecule. At least three residues from this cluster govern the substrate specificity. Substrate binding itself contributes to the stabilisation of domain closure and activation of the enzyme. In pyruvate reduction, D-LDH can adapt another protonated residue, a lysine residue, to accomplish the role of the acid catalyst His296. Required lowering of the lysine pK(a) value is explained on the basis of the H296K mutant structure.

Binding Sites↗
PubMed2002

Site-directed mutagenesis of the essential arginine of the formate dehydrogenase active centre.

Sequence alignment shows that residue Arg 284 (according to the numbering of the residues in formate dehydrogenase, FDH, from the methylotrophic bacterium Pseudomonas sp. 101) is conserved in NAD-dependent FDHs and D-specific 2-hydroxyacid dehydrogenases. Mutation of Arg 284 to glutamine and alanine results in a change of the catalytic, thermodynamic and spectral properties of FDH. In comparison to wild-type, the affinity of the mutants for the substrate (K(formate)m) or the transition state analogue (K(azide)i) decreases and correlates with the ability of the side chain of residue 284 to form H-bonds. In contrast, the affinity for the coenzyme (K(NAD)d or K(NAD)m) is either not affected or increases and correlates inversely with the partial positive charge of the side chain. The temperature dependence of circular dichroism (CD) spectra of the wild-type FDH and its Ala mutant has been studied over the 5-90 degrees C temperature range. Both proteins reveal regions of enhanced conformational mobility at the predenaturing temperatures (40-55 degrees C) associated with a change of enzyme kinetic parameters and a co-operative transition around 55-70 degrees C which is followed by the loss of enzyme activity. CD spectra of the wild-type and mutant proteins were deconvoluted and contributions from various types of secondary structure estimated. It is shown that the co-operative transition at 55-70 degrees C in the FDH protein globule is triggered by a loss of alpha-helical secondary structure. The results confirm the conclusion, from the crystal structures, that Arg 284 is directly involved in substrate binding. In addition this residue seems to exert a major structural role by supporting the catalytic conformation of the enzyme active centre.

Arginine↗