Biomedical subjects

Victor Zaporojan

Publications and source records attributed to Victor Zaporojan.

5 recordsLinked to original sources

PubMed2006

Tissue engineering cartilage with aged articular chondrocytes in vivo.

BACKGROUND: Tissue engineering has the potential to repair cartilage structures in middle-aged and elderly patients using their own "aged" cartilage tissue as a source of reparative chondrocytes. However, most studies on tissue-engineered cartilage have used chondrocytes from postfetal or very young donors. The authors hypothesized that articular chondrocytes isolated from old animals could produce neocartilage in vivo as well as articular chondrocytes from young donors. METHODS: Articular chondrocytes from 8-year-old sheep (old donors) and 3- to 6-month-old sheep (young donors) were isolated. Cells were mixed in fibrin gel polymer at 40 x 10 cells/ml until polymerization. Cell-polymer constructs were implanted into the subcutaneous tissue of nude mice and harvested at 7 and 12 weeks. RESULTS: Samples and native articular cartilage controls were examined histologically and assessed biochemically for total DNA, glycosaminoglycan, and hydroxyproline content. Histological analysis showed that samples made with chondrocytes from old donors accumulated basophilic extracellular matrix and sulfated glycosaminoglycans around the cells in a manner similar to that seen in samples made with chondrocytes from young donors at 7 and 12 weeks. Biochemical analysis revealed that DNA, glycosaminoglycan, and hydroxyproline content increased in chondrocytes from old donors over time in a pattern similar to that seen with chondrocytes from young donors. CONCLUSIONS: This study demonstrates that chondrocytes from old donors can be rejuvenated and can produce neocartilage just as chondrocytes from young donors do when encapsulated in fibrin gel polymer in vivo. This study suggests that middle-aged and elderly patients could benefit from cartilage tissue-engineering repair using their own "aged" articular cartilage as a source of reparative chondrocytes.

Age Factors↗

PubMed2005

Biomechanical and biochemical characterization of composite tissue-engineered intervertebral discs.

Composite tissue-engineered intervertebral tissue was assembled in the shape of cylindrical disks composed of an outer shell of PGA mesh seeded with annulus fibrosus cells with an inner core of nucleus pulposus cells seeded into an alginate gel. Samples were implanted subcutaneously in athymic mice and retrieved at time points up to 16 weeks. At all retrieval times, samples maintained shape and contained regions of distinct tissue formation. Histology revealed progressive tissue formation with distinct morphological differences in tissue formation in regions seeded with annulus fibrosus and nucleus pulposus cells. Biochemical analysis indicated that DNA, proteoglycan, and collagen content in tissue-engineered discs increased with time, reaching >50% of the levels of native tissue by 16 weeks. The exception to this was the collagen content of the nucleus pulposus portion of the implants with were approximately 15% of native values. The equilibrium modulus of tissue-engineered discs was 49.0+/-13.2 kPa at 16 weeks, which was between the measured values for the modulus of annulus fibrosus and nucleus pulposus. The hydraulic permeability of tissue-engineered discs was 5.1+/-1.7x10(-14) m2/Pa at 16 weeks, which was between the measured values for the hydraulic permeability of annulus fibrosus and nucleus pulposus. These studies document the feasibility of creating composite tissue-engineered intevertebral disc implants with similar composition and mechanical properties to native tissue.

Alginates↗

PubMed2004

Injectable tissue-engineered cartilage with different chondrocyte sources.

Injectable engineered cartilage that maintains a predictable shape and volume would allow recontouring of craniomaxillofacial irregularities with minimally invasive techniques. This study investigated how chondrocytes from different cartilage sources, encapsulated in fibrin polymer, affected construct mass and volume with time. Swine auricular, costal, and articular chondrocytes were isolated and mixed with fibrin polymer (cell concentration of 40 x 10 cells/ml for all groups). Eight samples (1 cm x 1 cm x 0.3 cm) per group were implanted into nude mice for each time period (4, 8, and 12 weeks). The dimensions and mass of each specimen were recorded before implantation and after explantation. Ratios comparing final measurements and original measurements were calculated. Histological, biochemical, and biomechanical analyses were performed. Histological evaluations (n = 3) indicated that new cartilaginous matrix was synthesized by the transplanted chondrocytes in all experimental groups. At 12 weeks, the ratios of dimension and mass (n = 8) for auricular chondrocyte constructs increased by 20 to 30 percent, the ratios for costal chondrocyte constructs were equal to the initial values, and the ratios for articular chondrocyte constructs decreased by 40 to 50 percent. Constructs made with auricular chondrocytes had the highest modulus (n = 3 to 5) and glycosaminoglycan content (n = 4 or 5) and the lowest permeability value (n = 3 to 5) and water content (n = 4 or 5). Constructs made with articular chondrocytes had the lowest modulus and glycosaminoglycan content and the highest permeability value and water content (p < 0.05). The amounts of hydroxyproline (n = 5) and DNA (n = 5) were not significantly different among the experimental groups (p > 0.05). It was possible to engineer injectable cartilage with chondrocytes from different sources, resulting in neocartilage with different properties. Although cartilage made with articular chondrocytes shrank and cartilage made with auricular chondrocytes overgrew, the injectable tissue-engineered cartilage made with costal chondrocytes was stable during the time periods studied. Furthermore, the biomechanical properties of the engineered cartilage made with auricular or costal chondrocytes were superior to those of cartilage made with articular chondrocytes, in this model.

Animals↗

PubMed2004

Analysis of bending behavior of native and engineered auricular and costal cartilage.

A large-deflection elasticity model was used to describe the mechanical behavior of cartilaginous tissues during three-point bending tests. Force-deflection curves were measured for 20-mm long x 4-mm wide x approximately 1-mm thick strips of porcine auricular and costal cartilage. Using a least-squares method with elastic modulus in bending as the only adjustable parameter, data were fit to a model based on the von Karman theory for large deflection of plates. This model described the data well, with an average RMS error of 14.8% and an average R(2) value of 0.98. Using this method, the bending modulus of auricular cartilage (4.6 MPa) was found to be statistically lower (p < 0.05) than that of costal cartilage (7.1 MPa). Material features of the cartilage samples influenced the mechanical behavior, including the orientation of the perichondrium in auricular cartilage. These methods also were used to determine the elastic moduli of engineered cartilage samples produced by seeding chondrocytes into fibrin glue. The modulus of tissue-engineered constructs increased statistically with time (p < 0.05), but still were statistically lower than the moduli of the native tissue samples (p > 0.05), reaching only about a third of the values of native samples.

Animals↗

PubMed2003

Cell-based bonding of articular cartilage: An extended study.

This study evaluated the biomechanical characteristics of newly formed cartilaginous tissue synthesized from isolated chondrocytes and seeded onto devitalized cartilage in an extended study in vivo. Cartilage from porcine articular joints was cut into regular discs and devitalized by multiple freeze-thaw cycles. Articular chondrocytes were enzymatically isolated and incubated in suspension culture in the presence of devitalized cartilage discs for 21 days. This procedure allowed the isolated chondrocytes to adhere to the devitalized matrix surfaces. Chondrocyte-matrix constructs were assembled with fibrin glue and implanted in dorsal subcutaneous pockets in nude mice for up to 8 months. Histological evaluation and biomechanical testing were performed to quantify the integration of cartilage pieces and the mechanical properties of the constructs over time. Histological analysis indicated that chondrocytes grown on devitalized cartilage discs produced new matrix that bonded and integrated individual cartilage elements with mechanically functional tissue. Biomechanical testing demonstrated a time dependent increase in tensile strength, failure strain, failure energy, and tensile modulus to values 5-30% of normal articular cartilage by 8 months in vivo. The values recorded at 4 months were not statistically different from those collected at the latest time point, indicating that the limits of the biomechanical property values were reached after four months from implantation.

Animals↗