Vincent Adriaan Nierstrasz

PubMed2001

Marangoni Flow Driven Instabilities and Marginal Regeneration.

Fingering instabilities in films moving along wetted surfaces, dimpling in horizontal liquid films, and the drainage of vertical soap films by marginal regeneration are caused by surface tension gradients along the perimeter of the thin film. These gradients lead to a mechanical instability which involves Marangoni type liquid flow. It is possible to describe the conditions for the onset of marginal regeneration with a critical number of the ratio between the driving force for the Marangoni flow and the friction of film elements that move relative to their surroundings. This ratio is called the Mysels number. A linear stability analysis leads to a scaling relation lambda approximately h(Ca)(-1/3) between the wavelength lambda of the instability and the capillary number Ca (Ca=/etaV(s)/gamma. In experiments with several Marangoni-driven instabilities this scaling relation has been found; it illustrates the general applicability in the understanding of flow phenomena of this type. Copyright 2001 Academic Press.

Journal Article↗

PubMedDate not supplied

Process design for enzymatic adipyl-7-ADCA hydrolysis.

Adipyl-7-ADCA is a new source for 7-aminodeacetoxycephalosporanic acid (7-ADCA), one of the substrates for antibiotics synthesis. In this paper, a novel process for enzymatic 7-ADCA production is presented. The process consists of a reactor, a crystallization step, a membrane separation step, and various recycle loops. The reactor can either be operated batch-wise or continuously; with both types of processing high yields can be obtained. For batch reactors chemical degradation of 7-ADCA can be neglected. For continuous reactors, chemical stability of 7-ADCA is a factor to be taken into account. However, it was shown that the reaction conditions and reactor configuration could be chosen in such a way that also for continuous operation chemical degradation is not important. Downstream processing consisted of crystallization of 7-ADCA at low pH, followed by a nanofiltration step with which, at low pH, adipic acid could be separated from adipyl-7-ADCA and 7-ADCA. The separation mechanism of the nanofilter is based on size exclusion combined with charge effects. Application of this filtration step opens possibilities for recycling components to various stages of the process. Adipic acid can be recycled to the fermentation stage of the process while both adipyl-7-ADCA and 7-ADCA can be returned to the hydrolysis reactor. In this way, losses of substrates and product can be minimized.

Adipates↗