PubMed Health⌕ Search

Biomedical subjects

Vincent Madison

Publications and source records attributed to Vincent Madison.

18 recordsLinked to original sources
PubMed2006

Discovery of (1R,5S)-N-[3-amino-1-(cyclobutylmethyl)-2,3-dioxopropyl]- 3-[2(S)-[[[(1,1-dimethylethyl)amino]carbonyl]amino]-3,3-dimethyl-1-oxobutyl]- 6,6-dimethyl-3-azabicyclo[3.1.0]hexan-2(S)-carboxamide (SCH 503034), a selective, potent, orally bioavailable hepatitis C virus NS3 protease inhibitor: a potential therapeutic agent for the treatment of hepatitis C infection.

Hepatitis C virus (HCV) infection is the major cause of chronic liver disease, leading to cirrhosis and hepatocellular carcinoma, which affects more than 170 million people worldwide. Currently the only therapeutic regimens are subcutaneous interferon-alpha or polyethylene glycol (PEG)-interferon-alpha alone or in combination with oral ribavirin. Although combination therapy is reasonably successful with the majority of genotypes, its efficacy against the predominant genotype (genotype 1) is moderate at best, with only about 40% of the patients showing sustained virological response. Herein, the SAR leading to the discovery of 70 (SCH 503034), a novel, potent, selective, orally bioavailable NS3 protease inhibitor that has been advanced to clinical trials in human beings for the treatment of hepatitis C viral infections is described. X-ray structure of inhibitor 70 complexed with the NS3 protease and biological data are also discussed.

Administration, Oral↗
PubMed2006

Novel potent hepatitis C virus NS3 serine protease inhibitors derived from proline-based macrocycles.

The hepatitis C virus (HCV) NS3 protease is essential for viral replication. It has been a target of choice for intensive drug discovery research. On the basis of an active pentapeptide inhibitor, 1, we envisioned that macrocyclization from the P2 proline to P3 capping could enhance binding to the backbone Ala156 residue and the S4 pocket. Thus, a number of P2 proline-based macrocyclic alpha-ketoamide inhibitors were prepared and investigated in an HCV NS3 serine protease continuous assay (K(i*)). The biological activity varied substantially depending on factors such as the ring size, number of amino acid residues, number of methyl substituents, type of heteroatom in the linker, P3 residue, and configuration at the proline C-4 center. The pentapeptide inhibitors were very potent, with the C-terminal acids and amides being the most active ones (24, K(i*) = 8 nM). The tetrapeptides and tripeptides were less potent. Sixteen- and seventeen-membered macrocyclic compounds were equally potent, while fifteen-membered analogues were slightly less active. gem-Dimethyl substituents at the linker improved the potency of all inhibitors (the best compound was 45, K(i*) = 6 nM). The combination of tert-leucine at P3 and dimethyl substituents at the linker in compound 47 realized a selectivity of 307 against human neutrophil elastase. Compound 45 had an IC(50) of 130 nM in a cellular replicon assay, while IC(50) for 24 was 400 nM. Several compounds had excellent subcutaneous AUC and bioavailability in rats. Although tripeptide compound 40 was 97% orally bioavailable, larger pentapeptides generally had low oral bioavailability. The X-ray crystal structure of compounds 24 and 45 bound to the protease demonstrated the close interaction of the macrocycle with the Ala156 methyl group and S4 pocket. The strategy of macrocyclization has been proved to be successful in improving potency (>20-fold greater than that of 1) and in structural depeptization.

Antiviral Agents↗
PubMed2006

Impact of naturally occurring variants of HCV protease on the binding of different classes of protease inhibitors.

HCV drug discovery efforts have largely focused on genotype 1 virus due to its prevalence and relatively poor response to current therapy. However, patients infected with genotype 2 and 3 viruses account for a significant number of cases and would also benefit from new therapies. In vitro studies using two chemically distinct protease inhibitors with clinical potential showed that one, VX-950, was equally active on proteases from all three genotypes, whereas the other, BILN 2061, was significantly less active on genotype 2 and 3 proteases. Naturally occurring variation near the inhibitor binding site was identified based on sequence alignment of the protease region from genotype 1-3 sequences. Substitution of amino acids in genotype 1 based on genotype 2 and 3 has revealed residues which impact binding of BILN 2061. Substitution of residues 78-80, together with 122 and 132, accounted for most of the reduced sensitivity of genotype 2. The most critical position affecting inhibitor binding to genotype 3 protease was 168. Substitution of residues at positions 168, 123, and 132 fully accounted for the reduced sensitivity of genotype 3. Comparative studies of BILN 2061 and a closely related nonmacrocycle inhibitor suggested that the rigidity of BILN 2061, while conferring greater potency against genotype 1, rendered it more sensitive to variations near the binding site. Free energy perturbation analysis confirmed the experimental observations. The identification of naturally occurring variations which can affect inhibitor binding is an important step in the design of broad-spectrum, second generation protease inhibitors.

Binding Sites↗
PubMed2006

Stabilization of the autoproteolysis of TNF-alpha converting enzyme (TACE) results in a novel crystal form suitable for structure-based drug design studies.

The crystallization of TNF-alpha converting enzyme (TACE) has been useful in understanding the structure-activity relationships of new chemical entities. However, the propensity of TACE to undergo autoproteolysis has made enzyme handling difficult and impeded the identification of inhibitor soakable crystal forms. The autoproteolysis of TACE was found to be specific (Y352-V353) and occurred within a flexible loop that is in close proximity to the P-side of the active site. The rate of autoproteolysis was found to be proportional to the concentration of TACE, suggesting a bimolecular reaction mechanism. A limited specificity study of the S(1)' subsite was conducted using surrogate peptides and suggested substitutions that would stabilize the proteolysis of the loop at positions Y352-V353. Two mutant proteases (V353G and V353S) were generated and proved to be highly resistant to autoproteolysis. The kinetics of the more resistant mutant (V353G) and wild-type TACE were compared and demonstrated virtually identical IC(50) values for a panel of competitive inhibitors. However, the k(cat)/K(m) of the mutant for a larger substrate (P6 - P(6)') was approximately 5-fold lower than that for the wild-type enzyme. Comparison of the complexed wild-type and mutant structures indicated a subtle shift in a peripheral P-side loop (comprising the mutation site) that may be involved in substrate binding/turnover and might explain the mild kinetic difference. The characterization of this stabilized form of TACE has yielded an enzyme with similar native kinetic properties and identified a novel crystal form that is suitable for inhibitor soaking and structure determination.

ADAM Proteins↗
PubMed2006

Potent 7-hydroxy-1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid-based macrocyclic inhibitors of hepatitis C virus NS3 protease.

The NS3 protease of hepatitis C virus (HCV) has emerged as one of the best characterized targets for next-generation HCV therapy. The tetrapeptide 1 and pentapeptide 2 are alpha-ketoamide-type HCV serine protease inhibitors with modest potency. We envisioned that the 1,2,3,4-tetrahydroisoquinoline-3-carboxylamide (Tic) moiety could be cyclized to the P3 capping group. The resulting macrocycle could enhance the binding through its extra contact with the Ala156 methyl group. Macrocyclization could also provide a less peptidic HCV inhibitor. Synthesis started from dipeptide 5, which was obtained via a coupling of two amino acid derivatives. The N-terminal was capped as hept-6-enoylamide to give 6. Hydroboration of the double bond afforded alcohol 7, the precursor to the macrocycle 8. The macrocyclization was achieved under Mitsunobu conditions (PPh(3), ADDP). The macrocyclic acid 9 was then combined with appropriate right-hand fragments 12, 14, or 16, which was prepared from common intermediate 11. Finally, oxidation of alpha-hydroxyamide provided target molecule alpha-ketoamides 17, 18, and 21. The C-terminal esters were then elaborated to carboxylic acids 19 and 20, and amides 20 and 23. The inhibitors 17-23 were tested in HCV NS3 protease continuous assay. Tripeptide 17 was more potent than the larger acyclic tetrapeptide 1. The tetrapeptides 18-20 were as active as 17. Most significantly, the pentapeptides (21-23) were much better inhibitors (K(i) = 0.015-0.26 microM). The carboxylic acid (22) and amide (23) were 57-80 times more potent than the acyclic analogue 2. The X-ray crystal structure of compound 23 bound to the protease revealed that the macrocycle adopted a donutlike conformation and had close contact with the Ala156 methyl group. The ketone carbonyl formed a reversible covalent bond with Ser139. The n-propyl of P1 novaline and the aromatic ring of P2' phenylglycine formed a C-shaped clamp around the Lys136 side chain.

Aza Compounds↗
PubMed2005

AKT crystal structure and AKT-specific inhibitors.

AKT kinases are attractive targets for small molecule drug discovery because of their key role in tumor cell survival/proliferation and their overexpression/activation in many human cancers. This review summarizes studies that support the rationale for targeting AKT kinases in new drug discovery efforts. Structural features of AKT kinase in its inactive and active states, as determined by crystal structure analysis, are described. Recent efforts in the development and biological evaluation of small molecule inhibitors of AKT, and the challenges remaining are summarized. Inhibitors targeting the ATP binding site, PH domain and protein substrate binding site, as well as isoform selective allosteric inhibitors are reviewed. Structure-based design using PKA mutants as surrogates and computer modeling in the discovery of selective inhibitors is discussed. The issues and challenges facing the development of different classes of inhibitors as therapeutics are also discussed.

Adenosine Triphosphate↗
PubMed2005

Design, synthesis, and biological activity of m-tyrosine-based 16- and 17-membered macrocyclic inhibitors of hepatitis C virus NS3 serine protease.

The limited efficacy and considerable side effects of currently available therapies for the treatment of hepatitis C virus (HCV) infection have prompted significant efforts toward the development of safe and effective new therapeutics. The pentapeptide alpha-ketoamides of type 1 were weak HCV inhibitors with a binding constant, Ki, above 5 microM. We envisioned that cyclization of a P2 phenyl side chain to a P3 capping group could enhance binding through an interaction of the resulting macrocycle with the methyl group of Ala156 on the enzyme backbone. The macrocyclic dipeptide moiety would also decrease the peptidic nature of the inhibitors. The synthesis of macrocyclic HCV inhibitors started from m-tyrosine methyl ester. Two consecutive couplings, first, with Boc-cyclohexylglycine and, then, with hept-6-enoic acid, provided compound 6. The alkene was converted to an alcohol via hydroboration. The key macrocyclization of phenol alcohol 7 was achieved through a Mitsunobu reaction. Both 16- and 17-membered macrocycles (8 and 21) were prepared. After hydrolysis, the macrocyclic acids (15 and 22) were coupled to the right-hand tripeptide (14) to afford alpha-hydroxyamides, which upon Dess-Martin periodinane oxidation furnished the desired alpha-ketoamides. Esters, acids, and amides were incorporated at the C-terminal of these peptides. These inhibitors were tested in an HCV protease continuous assay. The binding constants (Ki) indicated that the 16-membered macrocyclic inhibitors (23 and 24) were less potent than the 17-membered analogues (16-19). It was also evident that C-terminal acids (i.e., 17) and amides (18 and 19) (Ki range: 0.16-0.31 microM) were much better inhibitors than tert-butyl esters (16 and 23). The X-ray crystal structure of compound 17 bound to the enzyme revealed that the macrocycle formed a "donut"-shaped ring around the methyl group of Ala156. P2' phenyl and P1 propyl groups wrapped around the Lys136 side chain, forming a "C"-shaped clamp. The 17-membered macrocyclic inhibitors 17-19 were significantly more potent than the acyclic pentapeptide 1.

Antiviral Agents↗
PubMed2005

ADAM33 enzyme properties and substrate specificity.

ADAM33 is an asthma susceptibility gene recently identified through a genetic study of asthmatic families [van Eerdewegh, et al. (2002) Nature 418, 426-430]. To understand the function of the gene product, the recombinant metalloproteinase domain of human ADAM33 was purified and tested for its substrate cleavage specificity using peptides derived from beta-amyloid precursor protein (APP). A single Ala substitution at the P2 position of a 10-residue APP peptide, YEVHHQKLVF, yielded a 20-fold more efficient substrate. Terminal truncation studies identified a minimal nine-residue core (P5-P4') important for ADAM33 recognition and cleavage. Full positional scanning of the 10-mer peptide using the 19 naturally occurring l-amino acids (excluding Cys) revealed a substrate specificity profile. A strong preference for Val or Ile at P3, Ala at P2, and Gln at P1' was observed. The substrate binding model based on the X-ray structure of the ADAM33-inhibitor complex supported the observed substrate specificity profile. On the basis of this, an improved substrate was designed and a fluorescence resonance energy transfer (FRET) assay was developed using a fluorogenic derivative of this substrate. Kinetic studies confirmed that the best substrate, FRET-P2 [K(Dabcyl)YRVAFQKLAE(Edans)K], was approximately 100-fold more efficient than the wild-type APP peptide substrate, with a k(cat)/K(m) value of (3.6 +/- 0.1) x 10(4) s(-)(1) M(-)(1). Using this substrate and the FRET assay, ADAM33 enzyme activity and thermal stability were characterized. ADAM33 dependence on buffer conditions, detergents, and temperature was examined, and optimal conditions were defined. Accurate K(i) values for tissue inhibitors of metalloproteinase and small molecule compounds were obtained.

ADAM Proteins↗
PubMed2004

Improved activity and thermostability of Candida antarctica lipase B by DNA family shuffling.

DNA family shuffling was used to create chimeric lipase B proteins with improved activity toward the hydrolysis of diethyl 3-(3',4'-dichlorophenyl)glutarate (DDG). Three homologous lipases from Candida antarctica ATCC 32657, Hyphozyma sp. CBS 648.91 and Crytococcus tsukubaensis ATCC 24555 were cloned and shuffled to generate a diverse gene library. A high-throughput screening assay was developed and used successfully to identify chimeric lipase B proteins having a 20-fold higher activity toward DDG than lipase B from C.antarctica ATCC 32657 and a 13-fold higher activity than the most active parent derived from C.tsukubaensis ATCC 24555. In addition, the stability characteristics of several highly active chimeric proteins were also improved as a result of family shuffling. For example, the half-life at 45 degrees C and melting point (T(m)) of one chimera exceeded those of lipase B from C.antarctica ATCC 32657 by 11-fold and 6.4 degrees C, respectively, which closely approached the stability characteristics of the most thermostable parent derived from Hyphozyma sp. CBS 648.91.

Amino Acid Sequence↗
PubMed2004

Crystal structure of the catalytic domain of human ADAM33.

Adam33 is a putative asthma susceptibility gene encoding for a membrane-anchored metalloprotease belonging to the ADAM family. The ADAMs (a disintegrin and metalloprotease) are a family of glycoproteins implicated in cell-cell interactions, cell fusion, and cell signaling. We have determined the crystal structure of the Adam33 catalytic domain in complex with the inhibitor marimastat and the inhibitor-free form. The structures reveal the polypeptide fold and active site environment resembling that of other metalloproteases. The substrate-binding site contains unique features that allow the structure-based design of specific inhibitors of this enzyme.

ADAM Proteins↗
PubMed2004

Three-dimensional models of wild-type and mutated forms of cytochrome P450 14alpha-sterol demethylases from Aspergillus fumigatus and Candida albicans provide insights into posaconazole binding.

The cytochrome P450 sterol 14alpha-demethylase enzyme (CYP51) is the target of azole antifungals. Azoles block ergosterol synthesis, and thereby fungal growth, by binding in the active-site cavity of the enzyme and ligating the iron atom of the heme cofactor through a nitrogen atom of the azole. Mutations in and around the CYP51 active site have resulted in azole resistance. In this work, homology models of the CYP51 enzymes from Aspergillus fumigatus and Candida albicans were constructed based on the X-ray crystal structure of CYP51 from Mycobacterium tuberculosis. Using these models, binding modes for voriconazole (VOR), fluconazole (FLZ), itraconazole (ITZ), and posaconazole (POS) were predicted from docking calculations. Previous work had demonstrated that mutations in the vicinity of the heme cofactor had a greater impact on the binding of FLZ and VOR than on the binding of POS and ITZ. Our modeling data suggest that the long side chains of POS and ITZ occupy a specific channel within CYP51 and that this additional interaction, which is not available to VOR and FLZ, serves to stabilize the binding of these azoles to the mutated CYP51 proteins. The model also predicts that mutations that were previously shown to specifically impact POS susceptibility in A. fumigatus and C. albicans act by interfering with the binding of the long side chain.

Amino Acid Sequence↗
PubMed2003

Application of the lambda-dynamics method to evaluate the relative binding free energies of inhibitors to HCV protease.

The lambda-dynamics method was used to calculate the relative binding free energies of inhibitors to the hepatitis C virus (HCV) protease. A total of seven HCV protease p-side product inhibitors were used in this study. The inhibitors are 6-mer peptides spanning P6-P1 (Ac-Asp-d-Glu-Leu-Ile-Cha-P1-CO(2)H). For this protein, S1 is a major hydrophobic pocket for binding. Binding of various residues to this pocket was investigated through free energy simulations and experimental inhibition constants. Several 300 ps lambda-dynamics simulations in explicit solvent were performed. The relative binding free energy was estimated from these simulations. From a single simulation, the inhibitors can be correctly classified into highly potent and weakly potent groups. The multiple simulations give an accurate rank ordering of inhibitor potency; computed and experimental binding free energies agree with 0.6 kcal/mol for five of the seven inhibitors. In addition, free energy perturbation (FEP) calculations were carried out to validate the results from lambda-dynamics. A total of 6 ligand pairs were compared. For each pair, 5-11 windows were used to map one ligand to the other. The cumulative simulation time was over 2 ns for each ligand pair. For four of the six ligand pairs, the lambda-dynamics free energy difference fits better than the FEP difference to the experimental value. The fact that the lambda-dynamics method achieved similar results in only a fraction of the total simulation time for FEP further demonstrates the robustness of the lambda-dynamics method.

Endopeptidases↗
PubMed2003

Improving tolerance of Candida antarctica lipase B towards irreversible thermal inactivation through directed evolution.

To expand the functionality of lipase B from Candida antarctica (CALB) we have used directed evolution to create CALB mutants with improved resistance towards irreversible thermal inactivation. Two mutants, 23G5 and 195F1, were generated with over a 20-fold increase in half-life at 70 degrees C compared with the wild-type CALB (WT-CALB). The increase in half-life was attributed to a lower propensity of the mutants to aggregate in the unfolded state and to an improved refolding. The first generation mutant, 23G5, obtained by error-prone PCR, had two amino acid mutations, V210I and A281E. The second generation mutant, 195F1, derived from 23G5 by error-prone PCR, had one additional mutation, V221D. Amino acid substitutions at positions 221 and 281 were determined to be critical for lipase stability, while the residue at position 210 had only a marginal effect. The catalytic efficiency of the mutants with p-nitrophenyl butyrate and 6,8-difluoro-4-methylumbelliferyl octanoate was also found to be superior to that of WT-CALB.

Amino Acid Substitution↗
PubMed2002

Human members of the eukaryotic protein kinase family.

BACKGROUND: Eukaryotic protein kinases (EPKs) constitute one of the largest recognized protein families represented in the human genome. EPKs, which are similar to each other in sequence, structure and biochemical properties, are important players in virtually every signaling pathway involved in normal development and disease. Near completion of projects to sequence the human genome and transcriptome provide an opportunity to identify and perform sequence analysis on a nearly complete set of human EPKs. RESULTS: Publicly available genetic sequence data were searched for human sequences that potentially represent EPK family members. After removal of duplicates, splice variants and pseudogenes, this search yielded 510 sequences with recognizable similarity to the EPK family. Protein sequences of putative EPK catalytic domains identified in the search were aligned, and a phonogram was constructed based on the alignment. Representative sequence records in GenBank were identified, and derived information about gene mapping and nomenclature was summarized. CONCLUSIONS: This work represents a nearly comprehensive census and early bioinformatics overview of the EPKs encoded in the human genome. Evaluation of the sequence relationships between these proteins contributes contextual information that enhances understanding of individual family members. This curation of human EPK sequences provides tools and a framework for the further characterization of this important class of enzymes.

Binding Sites↗
PubMed2002

Insights from a three-dimensional model into ligand binding to constitutive active receptor.

Two orphan nuclear receptors, constitutive active (or androstane) receptor (CAR) and pregnane X receptor (PXR), are among the most important mediators of ligand-activated transcriptional induction of liver microsomal cytochrome P450 drug-metabolizing enzymes. CAR and PXR belong to the same NR1I receptor subfamily and show high sequence homology to each other. The vitamin D receptor (VDR) also belongs to the NR1I subfamily and has the second highest homology to CAR in the ligand binding domain. A 3D model of the ligand binding domain of human CAR (hCAR) was constructed based on the available X-ray structures of human PXR (hPXR) and VDR (hVDR). The model shows that the size of the ligand binding cavities of hCAR and hPXR are similar, but larger than that of hVDR. hPXR's capability of binding to extremely large ligands, such as rifampicin, implies that its binding cavity may be able to expand further through the flexibility of a surface loop. In contrast, hCAR does not have this loop so that its cavity cannot expand, suggesting that hCAR would not bind to the largest hPXR ligands. Docking calculations of selected ligands to hCAR, based on the structural model, are consistent with previously reported receptor binding data. The results from this study indicate that structural modeling will be a useful tool for understanding ligand binding to hCAR and for design of drugs free of hCAR-mediated enzyme induction.

Amino Acid Sequence↗