PubMed Health⌕ Search

Biomedical subjects

Vittorio Crescenzi

Publications and source records attributed to Vittorio Crescenzi.

13 recordsLinked to original sources

Investigating the interactions of hyaluronan derivatives with biomolecules. The use of diffusional NMR techniques.

[Chemical structure: see text] The interactions between a biomaterial and biomolecules present in body fluids often determine the fate of the biomaterial. This paper presents a study on hyaluronan (HA)-containing materials (in soluble or colloidal form) that focuses on their interactions with lipids and proteins and for the first time uses PFG NMR as an analytical technique for probing these events. The interactions of HA-based polymers with phospholipids (DPPC and DPPG liposomes) are shown to depend both on charge and hydrophobicity factors. Despite the difference in behavior between albumin (substantially non-adhesive) and fibrinogen (adhesive), the interactions of the polymers with proteins do not seem to be based on hydrophobic effects but on surface polar interactions.

1,2-Dipalmitoylphosphatidylcholine↗

C6-oxidation and c5-epimerization of locust bean galactomannan studied by high field NMR and circular dichroism.

Galactose depleted locust bean gum was selectively oxidized in C(6) position and epimerized with mannuronan C(5)-epimerases to obtain the corresponding artificial uronanes. These new pseudo-alginates were characterized by NMR spectroscopy and circular dichroism (CD). Specifically, 1D and 2D NMR techniques allowed the degree of epimerization, the distribution of mannuronic and guluronic acid residues in the polysaccharidic chain, and the average G block length to be determined. In addition, NMR diffusion experiments showed that the epimerization reaction did not significantly degrade the polysaccharidic chains. Circular dichroism was used to investigate the kinetics of the epimerization reaction and to evidence the specific interaction between the epimerized locust bean samples with Ca(II) ions in dilute solution. All of the samples considered in this study form wall to wall gels in concentrated polymer solutions.

Acacia↗

Synthesis and NMR characterization of new hyaluronan-based NO donors.

Nitric oxide (NO) and hyaluronic acid (HA), two species widely different in terms of molecular complexity and biological competence, are both known to play an important role in the wound healing process. To combine the properties of HA and NO, we synthesized new NO-donors based on hyaluronic acid derivatives exhibiting a controlled NO-release under physiological conditions (in vitro tests). Since two molecules of NO can form a covalent bond with secondary amines to yield structures, named NONO-ates, able to release NO in solution, we used spermidine bound to HA as the NO-linker. The HA-spermidine derivative was obtained by controlled HA amidation in aqueous media, activating the biopolymer carboxylate groups with a water soluble carbodiimide. The resulting derivative, soluble in water, was fully characterized by high field 1H and 13C NMR spectroscopy. The amount of grafting of spermidine on HA was determined by integration of suitable 1H NMR signals. In addition, cross-linked derivatives of HA were synthesized by the Ugi's four-component reaction using formaldehyde, cyclohexylisocyanide, and spermidine. The HA-spermidine networks were characterized by 13C CP-MAS NMR spectroscopy. The degree of cross-linking of the networks was also determined. Finally, the release of NO from the swollen hydrogels freshly saturated with NO, in contact with aqueous media, was monitored by means of UV spectrophotometric measurements.

Carbohydrate Conformation↗

Versatile grafting of polysaccharides in homogeneous mild conditions by using atom transfer radical polymerization.

A versatile atom transfer radical polymerization (ATRP) method for polysaccharide grafting in homogeneous mild conditions without using protecting group chemistry is presented. Water/DMF mixtures with different compositions were used as the solvent. The "grafting-from" approach was used in order to prepare suitable pullulan and dextran ATRP macroinitiators with a well controlled degree of functionalization. Methacrylate and acrylamide monomers were grafted obtaining good control over the number, molecular weight and polydispersity of the grafted chains without homopolymer formation and polysaccharide degradation. The versatility of this method allowed us to prepare comblike derivatives with a wide range of properties (amphiphilic, ionic, and thermoresponsive) by simply changing the solvent composition and the catalyst. This could make possible the synthesis of new interesting biomaterials starting from a wide range of polysaccharides.

Carbohydrate Conformation↗

Expression and characterization of human-elastin-repeat-based temperature-responsive protein polymers for biotechnological purposes.

Rapid progress has been made in the design and synthesis of oligomers and polymers that emulate the properties of natural proteins. Molecular bioengineering offers the chance to design and produce artificial polymeric proteins with tailored polymeric properties. The elastin-like polypeptides are a well-defined family of polymers with noteworthy characteristic based on the VPGVG repeated motif of bovine elastin. In the human homologue, the most regular sequence is represented by the repetition of the VAPGVG hexapeptidic motif. On the basis of this sequence, a synthetic gene has been designed, cloned and expressed in Escherichia coli to obtain artificial protein polymers. The rapid one-step in-frame cloning of any biologically active sequence can be achieved directly in the expression vector, allowing further improvement of the potential of the resulting product.

Amino Acid Motifs↗

New exopolysaccharides produced by Aureobasidium pullulans grown on glucosamine.

The polysaccharides produced by Aureobasidium pullulans, grown using glucosamine as the carbon source, were investigated by means of methylation analysis, affinity chromatography and NMR spectroscopy. The results indicated that, besides a small amount of pullulan, this micro-organism was capable of producing-in low yields-mixtures of at least two different complex polysaccharides containing mainly mannose and galactose. (1)H NMR spectra of two fractions obtained by lectin affinity chromatography indicated that one polymer was constituted exclusively of mannose residues while the other contained both galactofuranosyl and mannopyranosyl residues.

Concanavalin A↗

New cross-linked and sulfated derivatives of partially deacetylated hyaluronan: synthesis and preliminary characterization.

Partial chemical deacetylation of hyaluronan (HA) has been carried out using known procedures and carefully controlled experimental conditions in order to minimize chain degradation. The sample described herein (deHA) has a degree of deacetylation of about 17%, which corresponds to what required for its further use, but a molecular weight of about 1/25 with respect to the native, starting material. Chemical gels have been prepared with different degrees of cross-linking by means of a Ugi multicomponent condensation reaction involving aqueous deHA, formaldehyde, and cyclohexylisocyanide: the gels are mechanically stable and exhibit good water uptake strongly dependent on the extent of cross-linking, as expected. deHA samples have also been selectively N-sulfated or O-sulfated: the former exhibit anticoagulant properties well exceeding those of the latter and not too inferior to heparin.

Cross-Linking Reagents↗

Solid-state 13C NMR study of poly(vinyl alcohol) gels.

Poly(vinyl alcohol) (PVA) with 55% and 61% syndiotacticity, and their related dry and hydrated gels obtained by two different freeze-thawing cycles have been investigated using the solid-state 13C CP-MAS NMR technique. From a comparative analysis of the spectra, evidence was obtained that the gelation process largely disrupts the intramolecular hydrogen-bonded network of the PVA. The addition of water to the dry gels favours their swelling, destroying intra-chain hydrogen bonds between hydroxyl groups as a function of the degree of tacticity and the gelation procedure, and promotes the formation of new networks of interchain hydrogen bonds. Information on the dynamics of the polymeric domains in the kilohertz range has been obtained from the analysis of the spin relaxation times T1rho(1H) and T1rho(13C) indicating that homogeneous arrangements of the amorphous or swollen polymeric chains exist, independent of the preparation method or the tacticity of the PVA chains.

Gels↗

A high field NMR study of the products ensuing from konjak glucomannan C(6)-oxidation followed by enzymatic C(5)-epimerization.

Konjak glucomannan (KGM) is a water-soluble linear copolymer of (1-->4) linked beta-D-mannopyranosyl and beta-D-glucopyranosyl units. It has been selectively C6-oxidized by a 2,2,6,6-tetramethylpiperidin-1-oxy mediated reaction to obtain the corresponding uronan. Oxidized KGM has been treated with three different C-5 epimerases, AlgE4, AlgE6, and AlgE1, to obtain uronans with a various content of alpha-L-gulopyranuronate residues, namely, KGME4, KGME6, and KGME1. By use of 1D selective and 2D NMR techniques, a full assignment of the high field (600 MHz) NMR spectra of the purified native KGM and of the oxidized and epimerized derivatives has been obtained. Since in the anomeric region of the (1)H NMR spectrum of native KGM, diads sensitivity is present, the glucose-glucose, glucose-mannose, mannose-mannose, and mannose-glucose distribution has been obtained. In the (13)C spectrum of oxidized KGM, due to the presence of triad sensitivity on the C-4 resonance of glucuronic and mannuronic units, a better sequential investigation has been possible. As a result the average length of mannuronic blocks, N(M) is obtained. When AlgE4, AlgE6, and AlgE1 enzymes are used for the epimerization of oxidized KGM, the reaction products differ significantly both in the proportion and in the distribution of the mannuronic and guluronic residues. In epimerized KGM derivatives, a careful deconvolution of (1)H spectra allows the measurement of the degree of epimerization. In the case of KGME1 and KGME6, the average blocks length, N(G), of the guluronic blocks introduced in the polysaccharidic chain with the epimerization has also been calculated. Due to the shortness of mannuronic blocks in the oxidized KGM before the epimerization, N(G) in the epimerized compounds is also very low.

Magnetic Resonance Spectroscopy↗

New gelatin-based hydrogels via enzymatic networking.

New types of hydrogels have been obtained starting from high bloom purified gelatin A, alone or in mixtures with hyaluronan and with a hyaluronan derivative bearing primary amino groups, by transglutaminase-catalyzed cross-linking. The reticulation process, carried out adopting two different temperature protocols, and the ensuing materials have been characterized in terms of rheologically estimated gel times, equilibrium swelling in water and in phosphate buffer solution (PBS), and rigidity modulus. Main structural and conformational factors governing the physicochemical properties and the possible application of the new hydrogels are discussed.

Cross-Linking Reagents↗

Synthesis and partial characterization of hydrogels obtained via glutaraldehyde crosslinking of acetylated chitosan and of hyaluronan derivatives.

Hydrophilic networks based on functionalized hyaluronic acid and on partially acetylated chitosan, respectively, have been obtained. In the case of hyaluronic acid (HA), primary amino functionalities have been introduced along the polysaccharide chains. The ensuing derivatives, i.e., HA-lysine (HA-K), HA-diamino pentane (HA-DAP), and HA-glycine-lysine (HA-GK), have been characterized by high field NMR spectroscopy. NMR 2D-DOSY experiments have allowed us to optimize the purification procedure. Chitosan was made soluble in water by partial acetylation. Cross-linking reactions have been performed using glutaraldehyde. The obtained networks have been qualitatively characterized by means of (13)C CP-MAS NMR technique. The hydrogels have been characterized also in terms of water uptake.

Acetylation↗

C(6)-oxidation followed by C(5)-epimerization of guar gum studied by high field NMR.

Guar gum, a beta-D-(1-->4)-linked D-mannan with alpha-D-galactopyranosyl units attached as side groups, was treated with alpha-galactosidase, an enzyme that splits off the alpha-D-galactosyl units to obtain a galactomannan with a low galactose content. The galactose-depleted polysaccharide was then selectively oxidized in C(6) position and epimerized using mannuronan C(5)-epimerases, namely AlgE1, AlgE4, AlgE6, and their mixtures, obtaining new pseudo-alginates. In this paper, we report a full high field 1D and 2D NMR study of guar gum as such and of the galactose-depleted, oxidized and epimerized compounds, respectively. From the 1H NMR spectra, the degree of epimerization, the distribution of mannuronic acid (M) and guluronic acid (G) residues and the average G-block length, N(G>1), were obtained. By means of NMR diffusion experiments, it was also shown that no significant degradation of the polysaccharide occurs as a consequence of the epimerization reactions.

Carbohydrate Conformation↗

Characterization of methylprednisolone esters of hyaluronan in aqueous solution: conformation and aggregation behavior.

Methylprednisolone steroid esters of hyaluronan differing in degree of functionalization and molecular weight were investigated in aqueous solution. Conformation and aggregation phenomena were elucidated by means of circular dichroism, viscometry, rheology, and nuclear magnetic resonance, mainly by (1)H pulsed field gradient (PFG) NMR, which allows the determination of the diffusion coefficient of the species under investigation. The functionalization of hyaluronan with the steroid induces a reduction of the molecular volume, as a consequence of intramolecular hydrophobic interactions. For concentrated samples we have observed the coexistence of unimolecular collapsed chains and of aggregates, the latter disappearing upon dilution. The methylprednisolone ester of lower molecular weight hyaluronan has a larger molecular volume than its higher molecular weight analogue, even though still smaller than the underivatized polymer. This effect can be explained with the reduced flexibility of the polymer backbone probably impairing intramolecular interactions.

Esters↗