Biomedical subjects

W A Baase

Publications and source records attributed to W A Baase.

At least 19 recordsLinked to original sources

PubMed1999

Comparing the thermodynamic stabilities of a related thermophilic and mesophilic enzyme.

Several models have been proposed to explain the high temperatures required to denature enzymes from thermophilic organisms; some involve greater maximum thermodynamic stability for the thermophile, and others do not. To test these models, we reversibly melted two analogous protein domains in a two-state manner. E2cd is the isolated catalytic domain of cellulase E2 from the thermophile Thermomonospora fusca. CenAP30 is the analogous domain of the cellulase CenA from the mesophile Cellulomonas fimi. When reversibly denatured in a common buffer, the thermophilic enzyme E2cd had a temperature of melting (Tm) of 72.2 degrees C, a van't Hoff enthalpy of unfolding (DeltaHVH) of 190 kcal/mol, and an entropy of unfolding (DeltaSu) of 0.55 kcal/(mol*K); the mesophilic enzyme CenAP30 had a Tm of 56.4 degrees C, a DeltaHVH of 107 kcal/mol, and a DeltaSu of 0. 32 kcal/(mol*K). The higher DeltaHVH and DeltaSu values for E2cd suggest that its free energy of unfolding (DeltaGu) has a steeper dependence on temperature at the Tm than CenAP30. This result supports models that predict a greater maximum thermodynamic stability for thermophilic enzymes than for their mesophilic counterparts. This was further explored by urea denaturation. Under reducing conditions at 30 degrees C, E2cd had a concentration of melting (Cm) of 5.2 M and a DeltaGu of 11.2 kcal/mol; CenAP30 had a Cm of 2.6 M and a DeltaGu of 4.3 kcal/mol. Under nonreducing conditions, the Cm and DeltaGu of CenAP30 were increased to 4.5 M and 10.8 kcal/mol at 30 degrees C; the Cm for E2cd was increased to at least 7.4 M at 32 degrees C. We were unable to determine a DeltaGu value for E2cd under nonreducing conditions due to problems with reversibility. These data suggest that E2cd attains its greater thermal stability (DeltaTm = 15.8 degrees C) through a greater thermodynamic stability (DeltaDeltaGu = 6.9 kcal/mol) compared to its mesophilic analogue CenAP30.

Actinomycetales↗

PubMed1998

Generation of ligand binding sites in T4 lysozyme by deficiency-creating substitutions.

Several variants of T4 lysozyme have been identified that sequester small organic ligands in cavities or clefts. To evaluate potential binding sites for non-polar molecules, we screened a number of hydrophobic large-to-small mutants for stabilization in the presence of benzene. In addition to Leu99-->Ala, binding was indicated for at least five other mutants. Variants Met102-->Ala and Leu133-->Gly, and a crevice mutant, Phe104-->Ala, were further characterized using X-ray crystallography and thermal denaturation. As predicted from the shape of the cavity in the benzene complex, mutant Leu133-->Gly also bound p-xylene. We attempted to enlarge the cavity of the Met102-->Ala mutant into a deep crevice through an additional substitution, but the double mutant failed to bind ligands because an adjacent helix rearranged into a non-helical structure, apparently due to the loss of packing interactions. In general, the protein structure contracted slightly to reduce the volume of the void created by truncating substitutions and expanded upon binding the non-polar ligand, with shifts similar to those resulting from the mutations.A polar molecule binding site was also created by truncating Arg95 to alanine. This creates a highly complementary buried polar environment that can be utilized as a specific "receptor" for a guanidinium ion. Our results suggest that creating a deficiency through truncating mutations of buried residues generates "binding potential" for ligands with characteristics similar to the deleted side-chain. Analysis of complex and apo crystal structures of binding and non-binding mutants suggests that ligand size and shape as well as protein flexibility and complementarity are all determinants of binding. Binding at non-polar sites is governed by hydrophobicity and steric interactions and is relatively permissive. Binding at a polar site is more restrictive and requires extensive complementarity between the ligand and the site.

Bacteriophage T4↗

PubMed1998

The response of T4 lysozyme to large-to-small substitutions within the core and its relation to the hydrophobic effect.

To further examine the structural and thermodynamic basis of hydrophobic stabilization in proteins, all of the bulky non-polar residues that are buried or largely buried within the core of T4 lysozyme were substituted with alanine. In 25 cases, including eight reported previously, it was possible to determine the crystal structures of the variants. The structures of four variants with double substitutions were also determined. In the majority of cases the "large-to-small" substitutions lead to internal cavities. In other cases declivities or channels open to the surface were formed. In some cases the structural changes were minimal (mainchain shifts < or = 0.3 A); in other cases mainchain atoms moved up to 2 A. In the case of Ile 29 --> Ala the structure collapsed to such a degree that the volume of the putative cavity was zero. Crystallographic analysis suggests that the occupancy of the engineered cavities by solvent is usually low. The mutants Val 149 --> Ala (V149A) and Met 6 --> Ala (M6A), however, are exceptions and have, respectively, one and two well-ordered water molecules within the cavity. The Val 149 --> Ala substitution allows the solvent molecule to hydrogen bond to polar atoms that are occluded in the wild-type molecule. Similarly, the replacement of Met 6 with alanine allows the two solvent molecules to hydrogen bond to each other and to polar atoms on the protein. Except for Val 149 --> Ala the loss of stability of all the cavity mutants can be rationalized as a combination of two terms. The first is a constant for a given class of substitution (e.g., -2.1 kcal/mol for all Leu --> Ala substitutions) and can be considered as the difference between the free energy of transfer of leucine and alanine from solvent to the core of the protein. The second term can be considered as the energy cost of forming the cavity and is consistent with a numerical value of 22 cal mol(-1) A(-3). Physically, this term is due to the loss of van der Waal's interactions between the bulky sidechain that is removed and the atoms that form the wall of the cavity. The overall results are consistent with the prior rationalization of Leu --> Ala mutants in T4 lysozyme by Eriksson et al. (Eriksson et al., 1992, Science 255:178-183).

Alanine↗

PubMed1998

Context-dependent protein stabilization by methionine-to-leucine substitution shown in T4 lysozyme.

The substitution of methionines with leucines within the interior of a protein is expected to increase stability both because of a more favorable solvent transfer term as well as the reduced entropic cost of holding a leucine side chain in a defined position. Together, these two terms are expected to contribute about 1.4 kcal/mol to protein stability for each Met --> Leu substitution when fully buried. At the same time, this expected beneficial effect may be offset by steric factors due to differences in the shape of leucine and methionine. To investigate the interplay between these factors, all methionines in T4 lysozyme except at the amino-terminus were individually replaced with leucine. Of these mutants, M106L and M120L have stabilities 0.5 kcal/mol higher than wild-type T4 lysozyme, while M6L is significantly destabilized (-2.8 kcal/mol). M102L, described previously, is also destabilized (-0.9 kcal/mol). Based on this limited sample it appears that methionine-to-leucine substitutions can increase protein stability but only in a situation where the methionine side chain is fully or partially buried, yet allows the introduction of the leucine without concomitant steric interference. The variants, together with methionine-to-lysine substitutions at the same sites, follow the general pattern that substitutions at rigid, internal sites tend to be most destabilizing, whereas replacements at more solvent-exposed sites are better tolerated.

Bacteriophage T4↗

PubMed1996

A test of the "jigsaw puzzle" model for protein folding by multiple methionine substitutions within the core of T4 lysozyme.

To test whether the structure of a protein is determined in a manner akin to the assembly of a jigsaw puzzle, up to 10 adjacent residues within the core of T4 lysozyme were replaced by methionine. Such variants are active and fold cooperatively with progressively reduced stability. The structure of a seven-methionine variant has been shown, crystallographically, to be similar to wild type and to maintain a well ordered core. The interaction between the core residues is, therefore, not strictly comparable with the precise spatial complementarity of the pieces of a jigsaw puzzle. Rather, a certain amount of give and take in forming the core structure is permitted. A simplified hydrophobic core sequence, imposed without genetic selection or computer-based design, is sufficient to retain native properties in a globular protein.

Amino Acid Sequence↗

PubMed1996

Thermodynamic and structural compensation in "size-switch" core repacking variants of bacteriophage T4 lysozyme.

Previous analysis of randomly generated multiple mutations within the core of bacteriophage T4 lysozyme suggested that the "large-to-small" substitution Leu121 to Ala (L121A) and the spatially adjacent "small-to-large" substitution Ala129 to Met (A129M) might be mutually compensating. To test this hypothesis, the individual variants L121A and A129M were generated, as well as the double "size-switch" mutant L121A/A129M. To make the interchange symmetrical, the combination of L121A with A129L to give L121A/A129L was also constructed. The single mutations were all destabilizing. Somewhat surprisingly, the small-to-large substitutions, which increase hydrophobic stabilization but can also introduce strain, were less deleterious than the large-to-small replacements. Both Ala129 --> Leu and Ala129 --> Met offset the destabilization of L121A by about 50%. Also, in contrast to typical Leu --> Ala core substitutions, which destabilize by 2 to 5 kcal/mol, Leu121 --> Ala slightly stabilized A129L and A129M. Crystal structure analysis showed that a combination of side-chain and backbone adjustments partially accommodated changes in side-chain volume, but only to a limited degree. For example, the cavity that was created by the Leu121 to Ala replacement actually became larger in L121A/A129L. The results demonstrate that the destabilization associated with a change in volume of one core residue can be specifically compensated by an offsetting volume change in an adjacent residue. It appears, however, that complete compensation is unlikely because it is difficult to reconstitute an equivalent set of interactions. The relatively slow evolution of core relative to surface residues appears, therefore, to be due to two factors. First, a mutation in a single core residue that results in a substantial change in size will normally lead to a significant loss in stability. Such mutations will presumably be selected against. Second, if a change in bulk does occur in a buried residue, it cannot normally be fully compensated by a mutation of an adjacent residue. Thus, the most probable response will tend to be reversion to the parent protein.

Bacteriophage T4↗

PubMed1996

Protein structural plasticity exemplified by insertion and deletion mutants in T4 lysozyme.

To further investigate the ways in which proteins respond to changes in the length of the polypeptide chain, a series of 32 insertions and five deletions were made within nine different alpha-helices of T4 lysozyme. In most cases, the inserted amino acid was a single alanine, although in some instances up to four residues, not necessarily alanine, were used. Different insertions destabilized the protein by different amounts, ranging from approximately 1 to 6 kcal/mol. In one case, no protein could be obtained. An "extension" mutant in which the carboxy terminus of the molecule was extended by four alanines increased stability by 0.3 kcal/mol. For the deletions, the loss in stability ranged from approximately 3 to 5 kcal/mol. The structures of six insertion mutants, as well as one deletion mutant and the extension mutant, were determined, three in crystal forms nonisomorphous with wild type. In all cases, including previously described insertion mutants within a single alpha-helix, there appears to be a strong tendency to preserve the helix by translocating residues so that the effects of the insertion are propagated into a bend or loop at one end or the other of the helix. In three mutants, even the hydrophobic core was disrupted so as to permit the preservation of the alpha-helix containing the insertion. Translocation (or "register shift") was also observed for the deletion mutant, in this case a loop at the end of the helix being shortened. In general, when translocation occurs, the reduction in stability is only moderate, averaging 2.5 kcal/mol. Only in the most extreme cases does "bulging" or "looping-out" occur within the body of an alpha-helix, in which case the destabilization is substantial, averaging 4.9 kcal/mol. Looping-out can occur for insertions close to the end of a helix, in which case the destabilization is less severe, averaging 2.6 kcal/mol. Mutant A73-[AAA] as well as mutants R119-[A] and V131-[A], include shifts in the backbone of 3-6 A, extending over 20 residues or more. As a result, residues 114-142, which form a "cap" on the carboxy-terminal domain, undergo substantial reorganizations such that the interface between this "cap" and the rest of the protein is altered substantially. In the case of mutant A73-[AAA], two nearby alpha-helices, which form a bend of approximately 105 degrees in the wild-type structure, reorganize in the mutant structure to form a single, essentially straight helix. These structural responses to mutation demonstrate the plasticity of protein structures and illustrate ways in which their three-dimensional structures might changes during evolution.

Amino Acid Sequence↗

PubMed1995

Energetic origins of specificity of ligand binding in an interior nonpolar cavity of T4 lysozyme.

To determine the constraints on interactions within the core of a folded protein, we have analyzed the binding of 91 different compounds to an internal cavity created in the interior of phage T4 lysozyme by site-directed mutagenesis [Eriksson et al. (1992a) Nature 355, 371-373]. The cavity is able to accommodate a variety of small, mainly nonpolar, ligands. Molecules which do not appear to bind include those that are very polar, those that are too large, and those that have appropriate volume and polarity but inappropriate shape. Calorimetric analysis of 16 of these ligands reveals that their free energies of binding are poorly correlated with their solvent-transfer free energies. In addition, their enthalpies of binding are much larger than expected on the basis of transfer of the ligands from an aqueous to a nonpolar liquid phase. The binding energetics were analyzed by dividing the reaction into three processes: desolvation, immobilization, and packing. This analysis indicates that all three processes contribute to binding specificity. For a subset of these ligands that are structurally related, however, packing interactions in the protein interior are well modeled by the interactions of the ligands with octanol.

Bacteriophage T4↗

PubMed1995

Alanine scanning mutagenesis of the alpha-helix 115-123 of phage T4 lysozyme: effects on structure, stability and the binding of solvent.

A series of individual alanine mutations has been constructed in the helical region 115 to 123 in phage T4 lysozyme in order to evaluate the contribution to protein stability of the different side-chains within this region. Pairwise alanine mutations and a combination mutant with seven alanine substitutions were constructed to evaluate the additive effects upon structure and stability. Only three residues within this region (Ser117, Leu118 and Leu121) have a substantial influence upon stability (change in free energy of unfolding greater than 1.0 kcal/mol). Replacement of Ser117 with alanine results in an increase in protein stability of 1.27 kcal/mol, apparently due to the release of strain present in the wild-type protein. Replacement of the buried residues Leu118 and Leu121 is destabilizing. Substitution of the remaining six residues with alanine has relatively little effect on stability. This is consistent with prior studies showing that only 20 to 30% of the residues in amphipathic helices in T4 lysozyme are critical for stability. For some of the pairwise alanine mutants the effects on stability are additive. For most of these mutants, however, there is a slight (approximately 0.15 to 0.25 kcal/mol) non-additivity such that the double mutant is more stable than the sum of the constituent single mutants. This effect is consistently observed for residues with positions i, i +4; i.e. adjacent, but in consecutive turns of the helix, suggesting a weak but significant interaction between these amino acid residues. A more pronounced non-additivity (approximately 0.5 kcal/mol) is seen in the seven-alanine combination mutant. This non-additivity is due to a modest "collapse" or "repacking" that occurs for the combination mutants (especially the multiple alanine mutant) but is not possible for the single replacements. The truncation of some side-chains permits an increase in solvent accessibility of main-chain amide and carbonyl groups. This effect is most pronounced for the seven-alanine combination mutant, where two solvent molecules, not present in wild-type, hydrogen bond to main-chain carbonyl groups in the middle region of the helix. It has been suggested that the binding of such water molecules might represent the first step in solvent-mediated unfolding of an alpha-helix. The appearance of ordered solvent, however, appears to have very little effect on stability (approximately less than 0.2 kcal/mol).

Alanine↗

PubMed1995

A relationship between protein stability and protein function.

Enzymes are thought to use their ordered structures to facilitate catalysis. A corollary of this theory suggests that enzyme residues involved in function are not optimized for stability. We tested this hypothesis by mutating functionally important residues in the active site of T4 lysozyme. Six mutations at two catalytic residues, Glu-11 and Asp-20, abolished or reduced enzymatic activity but increased thermal stability by 0.7-1.7 kcal.mol-1. Nine mutations at two substrate-binding residues, Ser-117 and Asn-132, increased stability by 1.2-2.0 kcal.mol-1, again at the cost of reduced activity. X-ray crystal structures show that the substituted residues complement regions of the protein surface that are used for substrate recognition in the native enzyme. In two of these structures the enzyme undergoes a general conformational change, similar to that seen in an enzyme-product complex. These results support a relationship between stability and function for T4 lysozyme. Other evidence suggests that the relationship is general.

Bacteriophage T4↗

PubMed1995

Enhancement of protein stability by the combination of point mutations in T4 lysozyme is additive.

A number of mutations have been shown previously to stabilize T4 lysozyme. By combining up to seven such mutations in the same protein, the melting temperature was incrementally increased by up to 8.3 degrees C at pH 5.4 (delta delta G = 3.6 kcal/mol). This shows that it is possible to engineer a protein of enhanced thermostability by combining a series of rationally designed point mutations. It is also shown that this stabilization is achieved with only minor, localized changes in the structure of the protein. This is consistent with the observation that the change in stability of each of the multiple mutants is, in each case, additive, i.e. equal to the sum of the stability changes associated with the constituent single mutants. One of the seven substitutions, Asn116-->Asp, changes a residue that participates in substrate binding; not surprisingly, it causes a significant loss in activity. Ignoring this mutation, there is a gradual reduction in activity as successively more mutations are combined.

Bacteriophage T4↗

PubMed1994

Double-stranded DNA templates can induce alpha-helical conformation in peptides containing lysine and alanine: functional implications for leucine zipper and helix-loop-helix transcription factors.

Transcription factors of the basic-leucine zipper and basic-helix-loop-helix families specifically recognize DNA by means of intrinsically flexible peptide domains that assume an alpha-helical conformation upon binding to target DNA sequences. We have investigated the nonspecific interactions that underlie specific DNA recognition. Circular dichroism measurements showed that 20-bp double-stranded DNA oligonucleotides can act as templates to promote random coil-->alpha-helix transitions in short peptides containing alanine and lysine. This conformational change takes place without altering the structure of the DNA, and neither specific peptide-DNA contacts nor cooperative interactions between peptides are necessary. The conformational change does require (i) double-stranded (but not single-stranded) oligodeoxynucleotides in either the B or the B' conformation and (ii) peptides that can form positively charged amphipathic alpha-helices. In 10 mM Na2HPO4 (pH 7.5; 10 degrees C), the excess free-energy contribution of the DNA template to the stability of the alpha-helical form of the oligopeptides tested was delta Gex = -0.15 (+/- 0.07) kcal/mol per lysine residue. The implications of these results for the thermodynamics and kinetics of DNA target site selection by basic-leucine zipper and basic-helix-loop-helix regulatory proteins are discussed.

Alanine↗

PubMed1994

Accommodation of amino acid insertions in an alpha-helix of T4 lysozyme. Structural and thermodynamic analysis.

One to four alanines were inserted by site-directed mutagenesis at three different locations within the alpha-helix comprising residues 39 to 50 in bacteriophage T4 lysozyme. All insertion mutants were correctly folded and catalytically active although the insertions led to a thermal destabilization by 1.1 to 4.2 kcal/mol when compared to wild-type. Variants that restored part of the loss in stability associated with the initial alanine insertions could be found by randomizing the inserted amino acids. In selected cases, directed mutagenesis of adjacent residues was also used to regain stability. Structural information obtained from X-ray crystallography and/or 2D-NMR for 10 different variants showed two distinct ways in which the protein responded to the amino acid insertions: (1) The inserted amino acids were incorporated into the helix by replacing preceding wild-type amino acids and causing a shift in register towards the N terminus. As a consequence, wild-type amino acids were translocated from the helix into the preceding loop. (2) Insertions caused a "looping out" within the alpha-helix. In this case the perturbation was confined to a minimal region in the immediate vicinity of the insertion. No change in the length of the helix was detected in either case. The structural response appears to be determined by the maintenance of the hydrophobic interface between the helix and the rest of the protein. This interface remains essentially intact in all variant structures. The results exemplify the plasticity and the adaptability of the protein structure which allows the incorporation of additional amino acids into a secondary structure element without large structural perturbations, as long as vital internal interactions are preserved. They also suggest that loops in proteins related by evolution can vary in length not only because of insertions within the loops themselves but also as a consequence of insertions within neighboring secondary structure elements.

Alanine↗

PubMed1994

Determination of alpha-helix propensity within the context of a folded protein. Sites 44 and 131 in bacteriophage T4 lysozyme.

To determine the effects of different amino acids on the structure and stability of an alpha-helix in the context of a globular protein, all 19 naturally-occurring amino acids were substituted for Ser44 in phage T4 lysozyme. A more restricted set of nine replacements was also made for Val131. Ser44 and Val131 are two of a very limited number of possible sites in T4 lysozyme that are well within alpha-helices, are solvent-exposed and relatively free of interactions with neighboring residues, and are not involved in crystal contacts. High resolution structures for the majority of the mutants, some of which crystallized non-isomorphously with wild-type, were determined. With the exception of proline, the amino acid substitutions caused little if any perturbation of the alpha-helix backbone. Also the beta-branched residues Thr, Val and Ile show no indication of either side-chain or backbone distortion. Therefore, other than proline, there is no evidence that differences in helix propensities are associated with different amounts of strain introduced into the helix. For reference, and also to allow estimates of side-chain entropy, a survey was made of side-chain conformations in 100 well-refined protein structures. As noted previously all side-chains within alpha-helices strongly avoid the g- conformation (chi 1 approximately 60 degrees). This restricts the beta-branched residues Thr, Val and Ile to a single conformer (g+, chi 1 approximately -60 degrees). Asp, Asn, Met and Ser within helices also overwhelmingly prefer the g+ conformation. For Arg, Cys, Gln, Glu, Leu and Lys the t (chi 1 approximately 180 degrees) and g+ conformers are populated roughly equally. Only the aromatic residues, His, Tyr, Trp and Phe prefer the t conformation. These preferences are the same whether the side-chain is buried or solvent-exposed. In general, the side-chain conformations adopted by the residues substituted at positions 44 and 131 correspond to the most commonly observed conformation for the same amino acid in helices in known protein structures. The changes in protein stability for the replacements at site 131 in general agree well with those at site 44 (correlation r = 0.97), suggesting that these may be representative of substitutions at fully solvent-exposed sites in the middle of alpha-helices. The free energy values also agree quite well with those observed for equivalent replacements in a number of soluble alpha-helical model peptides and with data from "host-guest" studies and statistical surveys (r = 0.69 to 0.93).(ABSTRACT TRUNCATED AT 400 WORDS)

Amino Acid Sequence↗

PubMed1993

The role of backbone flexibility in the accommodation of variants that repack the core of T4 lysozyme.

To understand better how the packing of side chains within the core influences protein structure and stability, the crystal structures were determined for eight variants of T4 lysozyme, each of which contains three to five substitutions at adjacent interior sites. Concerted main-chain and side-chain displacements, with movements of helical segments as large as 0.8 angstrom, were observed. In contrast, the angular conformations of the mutated side chains tended to remain unchanged, with torsion angles within 20 degrees of those in the wild-type structure. These observations suggest that not only the rotation of side chains but also movements of the main chain must be considered in the evaluation of which amino acid sequences are compatible with a given protein fold.

Bacteriophage T4↗

PubMed1993

Individual subunits of bacterial luciferase are molten globules and interact with molecular chaperones.

We have studied the assembly of a large heterodimeric protein, bacterial luciferase, by mixing purified subunits expressed separately in bacteria. The individual subunits alpha and beta contain much (66% and 50%, respectively) of the alpha-helix content of the native heterodimer as measured by circular dichroism, yet the alpha subunit lacks observable tertiary structure as measured by NMR. These results are consistent with the alpha subunit existing in a molten globule or collapsed form prior to assembly. The molecular chaperone GroEL binds reversibly to both subunits prior to assembly. Since these observations were obtained under physiological conditions, we propose that the molten globule exists as a stable form during folding or assembly in the cell. Either the molten globule form of the subunits is an authentic folding intermediate or it is in rapid equilibrium with one. GroEL may function by facilitating assembly through stabilization of these incompletely folded subunits.

Adenosine Triphosphate↗

PubMed1993

How amino-acid insertions are allowed in an alpha-helix of T4 lysozyme.

Studies of extant protein sequences indicate that amino-acid insertions and deletions are preferentially located in loop regions, which has traditionally been explained as the result of selection removing deleterious mutations within secondary structural elements from the population. But there is no a priori reason to discount the possibility that insertions within secondary structure could either be tolerated until compensatory mutations arise, or have effects that are propagated away from secondary structure into loops. Earlier studies have indicated that insertions are generally tolerated, although much less well within secondary structure elements than in loop regions. Here we show that amino-acid insertions in an alpha-helix of T4 lysozyme can be accepted in two different ways. In some cases the inserted amino acids are accommodated within the helix, leading to the translocation of wild-type residues from the helix to the preceding loop. In other cases the insertion causes a 'looping-out' in the first or last turn of the helix. The individual structural responses seem to be dominated by the maintenance of the interface between the helix and the rest of the protein.

Amino Acid Sequence↗

PubMed1993

Similar hydrophobic replacements of Leu99 and Phe153 within the core of T4 lysozyme have different structural and thermodynamic consequences.

Two bulky amino acids within the core of phage T4 lysozyme have each been replaced in turn with a series of hydrophobic amino acids. In one set of experiments, Leu99 was replaced with Phe, Met, Ile, Val and Ala. In the second series, Phe153 was replaced with Leu, Met, Ile, Val and Ala. The double mutant in which both Leu99 and Phe153 were replaced with alanine was also constructed. The change in stability of the protein associated with each substitution and the crystal structure of each variant have been determined. In the case of replacements at position 99 the protein behaves in a relatively rigid manner, and changes very little in response to substitutions. In contrast, the protein is more flexible and adjusts much more in response to substitutions of Phe153. In both cases there is a roughly linear dependence between the stability of the mutant protein relative to wild-type (delta delta G) and the difference in the hydrophobic strength of the amino acids involved in the substitution based on solvent transfer measurements (delta delta Gtr). The change in delta delta G is, however, much greater than delta delta Gtr. For the Phe153 replacements the discrepancy is about 1.9-fold, while for the Leu99 series it is about 2.6-fold. Mutants such as Leu99-->Ala, for which the protein remains essentially rigid, tend to create larger cavities and so incur a larger energy of destabilization. Mutants such as Phe153-->Ala, for which the protein structure tends to relax, result in smaller cavities and so are less destabilized. Mutants L99I and L99V are less stable than expected from considerations of transfer free energy and cavity formation due to introduced strain caused by the replacement of Leu99 with a residue of different shape. Mutant F153L is more stable than the reference wild-type, even though the transfer free energy of Leu is less than that of Phe. The increase in stability is apparently due to torsional strain in the side-chain of Phe153 that is present in wild-type lysozyme, but is relieved in the mutant structure.

Bacteriophage T4↗