Biomedical subjects

W C Swann

Publications and source records attributed to W C Swann.

3 recordsLinked to original sources

PubMed2006

Fiber-laser frequency combs with subhertz relative linewidths.

We investigate the comb linewidths of self-referenced, fiber-laser-based frequency combs by measuring the heterodyne beat signal between two independent frequency combs that are phase locked to a common cw optical reference. We demonstrate that the optical comb lines can exhibit instrument-limited, subhertz relative linewidths across the comb spectra from 1200 to 1720 nm with a residual integrated optical phase jitter of approximately 1 rad in a 60 mHz to 500 kHz bandwidth. The projected relative pulse timing jitter is approximately 1 fs. This performance approaches that of Ti:sapphire frequency combs.

Journal Article↗

PubMed2006

Elimination of pump-induced frequency jitter on fiber-laser frequency combs.

Optical frequency combs generated by femtosecond fiber lasers typically exhibit significant frequency noise that causes broad optical linewidths, particularly in the comb wings and in the carrier-envelope offset frequency (f(ceo)) signal. We show these broad linewidths are mainly a result of white amplitude noise on the pump diode laser that leads to a breathing-like motion of the comb about a central fixed frequency. By a combination of passive noise reduction and active feedback using phase-lead compensation, this noise source is eliminated, thereby reducing the f(ceo) linewidth from 250 kHz to <1 Hz. The in-loop carrier-envelope offset phase jitter, integrated to 100 kHz, is 1.3 rad.

Journal Article↗

PubMed2006

Frequency-resolved coherent lidar using a femtosecond fiber laser.

We demonstrate a coherent lidar that uses a broadband femtosecond fiber laser as a source and resolves the returning heterodyne signal into N spectral channels by using an arrayed-waveguide grating. The data are processed incoherently to yield an N-times improvement in the Doppler measurement of a surface vibration. For N=6, we achieve a sensitivity of 153 Hz, corresponding to a 0.12 mm/s motion, in 10 ms despite a signal that is speckle broadened to 14 kHz. Alternatively, the data are processed coherently to form a range image. For a flat target, we achieve a 60 microm range resolution, limited mainly by the source bandwidth, despite the dispersion of 1 km of optical fiber in the signal path.

Journal Article↗