PubMed Health⌕ Search

Biomedical subjects

W C Wimley

Publications and source records attributed to W C Wimley.

At least 19 recordsLinked to original sources
PubMed2001

Visual detection of specific, native interactions between soluble and microbead-tethered alpha-helices from membrane proteins.

Using peptides tethered to polymer microbeads, we have developed a technique for measuring the interactions between the transmembrane alpha-helices of membrane proteins and for screening combinatorial libraries of peptides for members that interact with specific helices from membrane proteins. The method was developed using the well-characterized homodimerization sequence of the membrane-spanning alpha-helix from the erythrocyte membrane protein glycophorin A (GPA). As a control, we also tested a variant with a dimer-disrupting alteration of a critical glycine residue to leucine. To test for detectable, native interactions between detergent-solubilized and microbead-tethered alpha-helices, we incubated fluorescent dye-labeled GPA analogues in sodium dodecyl sulfate solution with microbeads that contained covalently attached GPA analogues. When the dye-labeled peptide in solution and the bead-tethered peptide both contained the native glycophorin A sequence, the microbeads readily accumulated the dye through lateral peptide-peptide interactions and were visibly fluorescent under UV light. When either the peptide in solution or the peptide attached to the beads contained the glycine to leucine change, the beads did not accumulate any dye. The usefulness of this method for screening tethered peptide libraries was tested by incubating dye-labeled, native sequence peptides in detergent solution with a few native sequence beads plus an excess of beads containing the variant glycine to leucine sequence. When the dye-labeled peptide in solution was present at a concentration of > or =2 microM, the few native sequence beads were visually distinguishable from the others because of their bright fluorescence. Using this model system, we have shown that it is possible to visually detect specific, native interactions between alpha-helices from membrane proteins using peptides tethered to polymer microbeads. It will thus be possible to use this method to measure the specific lateral interactions that drive the folding and organization of membrane proteins and to screen combinatorial libraries of peptides for members that interact with them.

Amino Acid Sequence↗
PubMed2001

A high-throughput screen for identifying transmembrane pore-forming peptides.

We have developed a visual microwell plate assay for rapid, high-throughput screening for membrane-disrupting molecules such as de novo designed pore formers, antibiotic peptides, bacterial toxins, and lipases. The detectability is based on the strong fluorescence emission of the lanthanide metal terbium(III) (Tb(3+)) when it interacts with the aromatic chelator dipicolinic acid (DPA). While Tb(3+) is not strongly fluorescent alone, the binary complex emits bright green fluorescence when irradiated with uv light. For the microwell plate assay, we prepared unilamellar phospholipid vesicles that had either Tb(3+) or DPA entrapped and the opposite molecule in the external solution. Disruption of the membranes allows the Tb(3+)/DPA complex to form, giving rise to a visibly fluorescent solution. In plates with 20-microl wells, the lower limit of visual detectability of the Tb(3+)/DPA complex in solution was about 2.5 microM. The lower limit of detectability using vesicles with entrapped Tb(3+) or DPA was about 50 microM phospholipid. We show that the membrane-disrupting effect of as little as 0.25 microM or 5 pmol of the pore-forming, antibiotic peptide alamethicin can be detected visually with this system. This sensitive, high-throughput assay is readily automatable and makes possible the visual screening of combinatorial peptide libraries for members that permeabilize lipid bilayer membranes.

Alamethicin↗
PubMed2001

Folding of beta-sheets in membranes: specificity and promiscuity in peptide model systems.

The interactions that drive the folding of beta-barrel membrane proteins have not been well studied because there have been few available model systems for membrane beta-sheets. In this work, we expand on a recently described model system to explore the contributions of interstrand hydrogen bonds, side-chain/side-chain interactions and side-chain/membrane interactions to beta-sheet formation in membranes. These experiments are based on the observation that the hydrophobic hexapeptide acetyl-Trp-Leu-Leu-Leu-Leu-Leu-OH (AcWLLLLL) folds, cooperatively and reversibly, into oligomeric, antiparallel beta-sheets in phosphatidylcholine membranes. To systematically characterize the important interactions that drive beta-sheet formation in membranes, we have used circular dichroism spectroscopy to determine the membrane secondary structure of each member of a complete host-guest family of related peptides of the form AcWLL-X-LL, where X is one of the natural amino acids. Peptides with hydrophobic X-residues of any size or character (X=Ala, Val, Ile, Leu, Cys, Met, Phe and Trp) form similar beta-sheets in membranes, while peptides with any polar X-residue or Gly or Pro at the X-position are random-coils, even when bound to membranes at high concentrations. The observed membrane sheet preferences correlate poorly with intrinsic sheet propensity scales measured in soluble proteins, but they correlate well with several membrane hydrophobicity scales. These results support the idea that the predominant interactions of the side-chains in membrane-bound beta-sheets are with the membrane lipids, and that backbone hydrogen bonding is the major driving force for the stabilization of beta-sheets in membranes.

Amino Acid Sequence↗
PubMed2000

Designing transmembrane alpha-helices that insert spontaneously.

Direct measurement of the free energies of transfer of hydrophobic membrane-spanning alpha-helices from water to membranes is important for the determination of an accurate experiment-based hydrophobicity scale for membrane proteins. An important objective of such a scale is to account for the presently unknown thermodynamic cost of partitioning hydrogen-bonded peptide bonds into the membrane hydrocarbon core. We describe here the physical properties of a transmembrane (TM) peptide, TMX-1, designed to test the feasibility of engineering peptides that spontaneously insert across bilayers but that have the important property of measurable monomeric water solubility. TMX-1, Ac-WNALAAVAAAL-AAVAAALAAVAAGKSKSKS-NH(2), is a 31-residue sequence with a 21-residue nonpolar core, N- and C-caps to favor helix formation, and a highly polar C-terminus to improve solubility and to control directionality of insertion into lipid vesicles. TMX-1 appeared to be soluble in water up to a concentration of at least 1 mg/mL (0.3 mM). However, fluorescence spectroscopy, fluorescence quenching, and circular dichroism (CD) spectroscopy indicated that the high solubility was due to the formation of molecular aggregates that persisted at peptide concentrations down to at least 0.1 microM peptide. Nevertheless, aqueous TMX-1 partitioned strongly into membrane vesicles with apparent mole-fraction free-energy values of -7.1 kcal mol(-1) for phosphatidylcholine (POPC) vesicles and -8.2 kcal mol(-1) for phosphatidylglycerol (POPG) vesicles. CD spectroscopy of TMX-1 in oriented multilayers formed from either lipid disclosed a very strong preference for a transmembrane alpha-helical conformation. When TMX-1 was added to preformed vesicles, it was fully helical. A novel fluorescence resonance energy transfer (FRET) method demonstrated that at least 50% of the TMX-1 insered spontaneously across the vesicle membranes. Binding and insertion were found to be fully reversible for POPC vesicles but not POPG vesicles. TMX-1 was thus found to have many of the properties required for thermodynamic measurements of TM peptide insertion. Importantly, the results obtained delineate the experimental problems that must be considered in the design of peptides that can partition spontaneously and reversibly as monomers into and across membranes. Our success with TMX-1 suggests that these problems are not insurmountable.

Amino Acid Sequence↗
PubMed2000

Determining the membrane topology of peptides by fluorescence quenching.

Determination of the topology of peptides in membranes is important for characterizing and understanding the interactions of peptides with membranes. We describe a method that uses fluorescence quenching arising from resonance energy transfer ("FRET") for determining the topology of the tryptophan residues of peptides partitioned into phospholipid bilayer vesicles. This is accomplished through the use of a novel lyso-phospholipid quencher (lysoMC), N-(7-hydroxyl-4-methylcoumarin-3-acetyl)-1-palmitoyl-2-hydroxy-sn-gly cero-3-phosphoethanolamine. The design principle was to anchor the methylcoumarin quencher in the membrane interface by attaching it to the headgroup of lyso-phosphoethanolamine. We show that lysoMC can be incorporated readily into large unilamellar phospholipid vesicles to yield either symmetrically (both leaflets) or asymmetrically (outer leaflet only) labeled bilayers. LysoMC quenches the fluorescence of membrane-bound tryptophan by the Förster mechanism with an apparent R(0) that is comparable to the thickness of the hydrocarbon core of a lipid bilayer (approximately 25 A). Consequently, the methylcoumarin acceptor predominantly quenches tryptophans that reside in the same monolayer as the probe. The topology of a peptide's tryptophan in membranes can be determined by comparing the quenching in symmetric and asymmetric lysoMC-labeled vesicles. Because it is essential to know that asymmetrically incorporated lysoMC remains so under all conditions, we also developed a second type of FRET experiment for assessing the rate of transbilayer diffusion (flip-flop) of lysoMC. Except in the presence of pore-forming peptides, there was no measurable flip-flop of lysoMC, indicating that asymmetric distributions of quencher are stable. We used these methods to show that N-acetyl-tryptophan-octylamide and tryptophan-octylester rapidly equilibrate across phosphatidylcholine (POPC) and phosphatidylglycerol (POPG) bilayers, while four amphipathic model peptides remain exclusively on the outer monolayer. The topology of the amphipathic peptide melittin bound to POPC could not be determined because it induced rapid flip-flop of lysoMC. Interestingly, melittin did not induce lysoMC flip-flop in POPG vesicles and was found to remain stably on the external monolayer.

Amino Acid Sequence↗
PubMed1999

An amphipathic alpha-helix at a membrane interface: a structural study using a novel X-ray diffraction method.

The amphipathic alpha-helix is a recurrent feature of membrane-active proteins, peptides, and toxins. Despite extensive biophysical studies, the structural details of its affinity for membrane interfaces remain rather vague. We report here the first results of an effort to obtain detailed structural information about alpha-helices in membranes by means of a novel X-ray diffraction method. Specifically, we determined the transbilayer position and orientation of an archetypal class A amphipathic helical peptide in oriented fluid-state dioleoylphosphatidylcholine (DOPC) bilayers. The peptide, Ac-18A-NH2(Ac-DWLKAFYDKVAEKLKEAF-NH2), is a model for class A amphipathic helices of apolipoprotein A-I and other exchangeable lipoproteins. The diffraction method relies upon experimental determinations of absolute scattering-length density profiles along the bilayer normal and the transbilayer distribution of the DOPC double bonds by means of specific bromination, and molecular modeling of the perturbed lipid bilayer (derived using the transbilayer distribution of the double bonds) and the peptide. The diffraction results showed that Ac-18A-NH2was located in the bilayer interface and that its transbilayer distribution could be described by a Gaussian function with a 1/e-halfwidth of 4.5(+/-0.3) A located 17.1(+/-0.3) A from the bilayer center, close to the glycerol moiety. Molecular modeling suggested that Ac-18A-NH2is helical and oriented generally parallel with the bilayer plane. The helicity and orientation were confirmed by oriented circular dichroism measurements. The width of the Gaussian distribution, a measure of the diameter of the helix, indicated that the Ac-18A-NH2helix penetrated the hydrocarbon core to about the level of the DOPC double bonds. Bilayer perturbations caused by Ac-18A-NH2were surprisingly modest, consisting of a slight decrease in bilayer thickness with a concomitant shift of the double-bond distribution toward the bilayer center, as expected from a small increase in lipid-specific area caused by the peptide.

Amino Acid Sequence↗
PubMed1999

Membrane protein folding and stability: physical principles.

Stably folded membrane proteins reside in a free energy minimum determined by the interactions of the peptide chains with each other, the lipid bilayer hydrocarbon core, the bilayer interface, and with water. The prediction of three-dimensional structure from sequence requires a detailed understanding of these interactions. Progress toward this objective is summarized in this review by means of a thermodynamic framework for describing membrane protein folding and stability. The framework includes a coherent thermodynamic formalism for determining and describing the energetics of peptide-bilayer interactions and a review of the properties of the environment of membrane proteins--the bilayer milieu. Using a four-step thermodynamic cycle as a guide, advances in three main aspects of membrane protein folding energetics are discussed: protein binding and folding in bilayer interfaces, transmembrane helix insertion, and helix-helix interactions. The concepts of membrane protein stability that emerge provide insights to fundamental issues of protein folding.

Animals↗
PubMed1998

Hydrophobic interactions of peptides with membrane interfaces.

The thermodynamic principles underlying the structural stability of membrane proteins are difficult to obtain directly from whole proteins because of intractable problems related to insolubility in the aqueous phase and extreme stability in the membrane phase. The principles must therefore be surmised from studies of the interactions of small peptides with lipid bilayers. This review is concerned with the hydrophobic interactions of such peptides with the interfacial regions of lipid bilayers. We first develop a general framework for thinking about the thermodynamics of membrane protein stability that centers on interfacial interactions and review the structural and chemical evidence that supports this interface-centered point of view. We then describe an experimentally determined whole-residue interfacial hydrophobicity scale that reveals the central role of the peptide bond in partitioning and folding. Finally, we consider the complexity and diversity of interfacial interactions revealed by differences between side-chain hydrophobicities determined using different classes of peptides.

Amino Acid Sequence↗
PubMed1998

The preference of tryptophan for membrane interfaces.

One of the ubiquitous features of membrane proteins is the preference of tryptophan and tyrosine residues for membrane surfaces that presumably arises from enhanced stability due to distinct interfacial interactions. The physical basis for this preference is widely believed to arise from amphipathic interactions related to imino group hydrogen bonding and/or dipole interactions. We have examined these and other possibilities for tryptophan's interfacial preference by using 1H magic angle spinning (MAS) chemical shift measurements, two-dimensional (2D) nuclear Overhauser effect spectroscopy (2D-NOESY) 1H MAS NMR, and solid state 2H NMR to study the interactions of four tryptophan analogues with phosphatidylcholine membranes. We find that the analogues reside in the vicinity of the glycerol group where they all cause similar modest changes in acyl chain organization and that hydrocarbon penetration was not increased by reduction of hydrogen bonding or electric dipole interaction ability. These observations rule out simple amphipathic or dipolar interactions as the physical basis for the interfacial preference. More likely, the preference is dominated by tryptophan's flat rigid shape that limits access to the hydrocarbon core and its pi electronic structure and associated quadrupolar moment (aromaticity) that favor residing in the electrostatically complex interface environment.

Bacterial Outer Membrane Proteins↗
PubMed1998

Folding of beta-sheet membrane proteins: a hydrophobic hexapeptide model.

Beta-sheets, in the form of the beta-barrel folding motif, are found in several constitutive membrane proteins (porins) and in several microbial toxins that assemble on membranes to form oligomeric transmembrane channels. We report here a first step towards understanding the principles of beta-sheet formation in membranes. In particular, we describe the properties of a simple hydrophobic hexapeptide, acetyl-Trp-Leu5 (AcWL5), that assembles cooperatively into beta-sheet aggregates upon partitioning into lipid bilayer membranes from the aqueous phase where the peptide is strictly monomeric and random coil. The aggregates, containing 10 to 20 monomers, undergo a relatively sharp and reversible thermal unfolding at approximately 60 degreesC. No pores are formed by the aggregates, but they do induce graded leakage of vesicle contents at very high peptide to lipid ratios. Because beta-sheet structure is not observed when the peptide is dissolved in n-octanol, trifluoroethanol or sodium dodecyl sulfate micelles, aggregation into beta-sheets appears to be an exclusive property of the peptide in the bilayer membrane interface. This is an expected consequence of the hypothesis that a reduction in the free energy of partitioning of peptide bonds caused by hydrogen bonding drives secondary structure formation in membrane interfaces. But, other features of interfacial partitioning, such as side-chain interactions and reduction of dimensionality, must also contribute. We estimate from our partitioning data that the free energy reduction per residue for aggregation is about 0.5 kcal mol-1. Although modest, its aggregate effect on the free energy of assembling beta-sheet proteins can be huge. This surprising finding, that a simple hydrophobic hexapeptide readily assembles into oligomeric beta-sheets in membranes, reveals the potent ability of membranes to promote secondary structure in peptides, and shows that the formation of beta-sheets in membranes is more facile than expected. Furthermore, it provides a basis for understanding the observation that membranes promote self-association of beta-amyloid peptides. AcWL5 and related peptides thus provide a good starting point for designing peptide models for exploring the principles of beta-sheet formation in membranes.

Circular Dichroism↗
PubMed1996

Solvation energies of amino acid side chains and backbone in a family of host-guest pentapeptides.

Octanol-to-water solvation free energies of acetyl amino amides (Ac-X-amides) [Fauchère, J.L., & Pliska, V. (1983) Eur. J. Med. Chem. --Chim. Ther. 18,369] form the basis for computational comparisons of protein stabilities by means of the atomic solvation parameter formalism of Eisenberg and McLachlan [(1986) Nature 319, 199]. In order to explore this approach for more complex systems, we have determined by octanol-to-water partitioning the solvation energies of (1) the guest (X) side chains in the host-guest pentapeptides AcWL-X-LL, (2) the carboxy terminus of the pentapeptides, and (3) the peptide bonds of the homologous series of peptides AcWLm (m = 1-6). Solvation parameters were derived from the solvation energies using estimates of the solvent-accessible surface areas (ASA) obtained from hard-sphere Monte Carlo simulations. The measurements lead to a side chain solvation-energy scale for the pentapeptides and suggest the need for modifying the Asp, Glu, and Cys values of the "Fauchère-Pliska" solvation-energy scale fro the Ac-X-amides. We find that the unfavorable solvation energy of nonpolar residues can be calculated accurately by a solvation parameter of 22.8 +/- 0.8 cal/mol/A2, which agrees satisfactorily with the AC-X-amide data and thereby validates the Monte Carlo ASA results. Unlike the Ac-X-amide data, the apparent solvation energies of the uncharged polar residues are also largely unfavorable. This unexpected finding probably results, primarily, from differences in conformation and hydrogen bonding in octanol and buffer but may also be due to the additional flaking peptide bonds of the pentapeptides. The atomic solvation parameter (ASP) for the peptide bond is comparable to the ASP of the charged carboxy terminus which is an order of magnitude larger than the ASP of the uncharged polar side chains of the Ac-X-amides. The very large peptide bond ASP, -96 +/- 6 cal/mol/A2, profoundly affects the results of computational comparisons of protein stability which use ASPs derived from octanol-water partitioning data.

Amides↗
PubMed1996

Direct measurement of salt-bridge solvation energies using a peptide model system: implications for protein stability.

The solvation energies of salt bridges formed between the terminal carboxyl of the host pentapeptide AcWL- X-LL and the side chains of Arg or Lys in the guest (X) position have been measured. The energies were derived from octanol-to-buffer transfer free energies determined between pH 1 and pH 9. 13C NMR measurements show that the salt bridges form in the octanol phase, but not in the buffer phase, when the side chains and the terminal carboxyl group are charged. The free energy of salt-bridge formation in octanol is approximately -4 kcal/mol (1 cal = 4.184 J), which is equal to or slightly larger than the sum of the solvation energies of noninteracting pairs of charged side chains. This is about one-half the free energy that would result from replacing a charge pair in octanol with a pair of hydrophobic residues of moderate size. Therefore, salt bridging in octanol can change the favorable aqueous solvation energy of a pair of oppositely charged residues to neutral or slightly unfavorable but cannot provide the same free energy decrease as hydrophobic residues. This is consistent with recent computational and experimental studies of protein stability.

Amino Acid Sequence↗
PubMed1996

Eradication of interleukin 5-transfected J558L plasmacytomas in mice by hydrogen peroxide-generating Stealth liposomes.

Certain human tumors are extensively infiltrated by eosinophils and contain extracellular deposits of eosinophil peroxidase, which uses hydrogen peroxide as a substrate to produce highly toxic hypohalous acids. We hypothesized that J558L HI, an interleukin 5-transfected murine plasmacytoma that is infiltrated by numerous degranulating eosinophils, would be especially sensitive to killing by hydrogen peroxide generated by glucose oxidase (beta-D-glucose:oxygen-oxido reductase; EC 1.13.4). Here we report that 4 i.v. injections of 0.5 ml of hydrogen peroxide-generating, anionic Stealth liposomes containing 50 micrograms of glucose oxidase eradicated s.c. implants of 10(6) J558L HI plasmacytoma cells in 6 of 13 mice. By contrast, the J558L HI tumors grew rapidly in 13 of 13 untreated mice and in 10 of 10 mice treated with daily i.v. injections of 50 micrograms of unencapsulated (free) glucose oxidase (P = 0.002 by log-rank test of survival curves constructed using the Kaplan-Meier method). Antisense transfected J558L tumors that did not contain eosinophils were not eradicated by the peroxide-generating liposomes in any of the 10 mice that were tested. Treatment with the liposomes was well tolerated for the first three doses (given on days 3, 4, and 5 after tumor inoculation). The fourth dose given on day 10 produced significant allergic toxicity and was, therefore, omitted in a second trial with only minimal reduction in the therapeutic response. We conclude that peroxide-generating, anionic Stealth liposomes can eradicate plasmacytomas infiltrated by eosinophils in mice. Our results, therefore, suggest that peroxide-generating compounds may be a useful experimental approach for treating those human tumors that are naturally infiltrated by eosinophils but resistant to conventional therapies.

Animals↗
PubMed1996

Experimentally determined hydrophobicity scale for proteins at membrane interfaces.

The partitioning of membrane-active oligopeptides into membrane interfaces promotes the formation of secondary structure. A quantitative description of the coupling of structure formation to partitioning, which may provide a basis for understanding membrane protein folding and insertion, requires an appropriate free energy scale for partitioning. A complete interfacial hydrophobicity scale that includes the contribution of the peptide bond was therefore determined from the partitioning of two series of small model peptides into the interfaces of neutral (zwitterionic) phospholipid membranes. Aromatic residues are found to be especially favoured at the interface while charged residues, and the peptide bond, are disfavoured about equally. Reduction of the high cost of partitioning the peptide bond through hydrogen bonding may be important in the promotion of structure formation in the membrane interface.

Animals↗
PubMed1995

Structure, function, and membrane integration of defensins.

Defensins comprise a structural class of small cationic peptides that exert broad-spectrum antimicrobial activities through membrane permeabilization. Their predominantly beta-sheet structure, stabilized by three disulfide bonds, distinguishes them from other antimicrobial peptides which typically form amphiphilic helices. Defensins bind to membranes electrostatically and subsequently form apparently multimeric pores. Recent structural and biophysical studies are beginning to provide insights into the process of permeabilization.

Amino Acid Sequence↗
PubMed1995

Leakage of membrane vesicle contents: determination of mechanism using fluorescence requenching.

Agents such as antimicrobial peptides and toxins can permeabilize membrane vesicles to cause leakage of entrapped contents in either a graded or an all-or-none fashion. Determination of which mode of leakage is induced is an important step in understanding the molecular mechanism of membrane permeabilization. Wimley et al. (1994, Protein Sci. 3:1362-1378) have developed a fluorescence method for distinguishing the two modes that makes use of the dye/quencher pair 8-aminonapthalene-1,3,6 trisulfonic acid (ANTS)/p-xylene-bis-pyridinium bromide (DPX) without the usual need for the physical separation of vesicles from released contents. Their "requenching" method establishes the mode of release through the fluorescence changes that occur when DPX is added externally to a solution of vesicles that have released some fraction of their contents. However, the requenching method as originally stated ignored the possibility of preferential release of dye or quencher. Here we extend the theory of the method to take into account preferential release and the effects of graded leakage. The ratio of the rates of release of the cationic quencher DPX and anionic dye 8-aminonapthalene-1,3,6 trisulfonic acid can be estimated by means of the theory. For graded leakage, we show that the release of the markers does not coincide with the fluorescence changes observed in the standard leakage assay. This is true for self-quenching dyes as well and means that 1) the amount of released material will be overestimated and 2) the kinetics will be nonexponential and have artificially high apparent rates. We show how the extended requenching analysis allows the results of leakage experiments to be corrected for artifacts that result from graded and preferential leakage. Experimental evidence is presented for the existence of peptide-induced preferential graded leakage of DPX from both neutral and anionic vesicles.

Amino Acid Sequence↗