PubMed Health⌕ Search

Biomedical subjects

W F DeGrado

Publications and source records attributed to W F DeGrado.

At least 91 records · Page 5Linked to original sources

Crystal structure of a synthetic triple-stranded alpha-helical bundle.

The x-ray crystal structure of a peptide designed to form a double-stranded parallel coiled coil shows that it is actually a triple-stranded coiled coil formed by three alpha-helices. Unlike the designed parallel coiled coil, the helices run up-up-down. The structure is stabilized by a distinctive hydrophobic interface consisting of eight layers. As in the design, each alpha-helix in the coiled coil contributes one leucine side chain to each layer. The structure suggests that hydrophobic interactions are a dominant factor in the stabilization of coiled coils. The stoichiometry and geometry of coiled coils are primarily determined by side chain packing in the solvent-inaccessible interior, but electrostatic interactions also contribute.

Amino Acid Sequence↗

Fluorescence studies of the secondary structure and orientation of a model ion channel peptide in phospholipid vesicles.

A 21-residue peptide of the sequence (LSSLLSL)3 forms ion channels when incorporated into planar lipid bilayer membranes of diphytanoylphosphatidylcholine (diPhy-PC). The frequency of channel openings increases with the applied voltage gradient. We investigated the molecular and structural mechanisms underlying this voltage dependence. A series of seven peptides, each containing a tryptophan substituted for a single residue in the middle heptad, was synthesized, purified, and incorporated into small, unilamellar, diPhy-PC vesicles. We measured circular dichroism, maximum fluorescence emission wave-lengths, and fluorescence quenching by both aqueous and lipid hydrocarbon-associated quenchers. Circular dichroism spectra and the observed sequence periodicity of all fluorescence and fluorescence quenching data are consistent with an alpha-helical peptide secondary structure. Energy transfer quenching measurements using N-terminally labeled (LSSLLSL)3 co-incorporated at lipid/peptide ratios greater than 100 into vesicles with one of the Trp-substituted peptides showed that the vesicle-associated peptide, in the absence of a voltage gradient across the bilayer, exists as an equilibrium mixture of monomers and dimers. Static fluorescence quenching measurements using different lipid-bound quenchers indicate that the helical axis of a representative lipid-associated peptide is, on average, oriented parallel to the surface of the membrane and located a few angstroms below the polar head group/hydrocarbon boundary. This surface orientation for the peptide is confirmed by the complementary sequence periodicity observed for Trp fluorescence emission wavelength shifts and collisional quenching by aqueous CsCl.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

Molecular characterization of helix-loop-helix peptides.

A class of regulators of eukaryotic gene expression contains a conserved amino acid sequence responsible for protein oligomerization and binding to DNA. This structure consists of an arginine- and lysine-rich basic region followed by a helix-loop-helix motif, which together mediate specific binding to DNA. Peptides were prepared that span this motif in the MyoD protein; in solution, they formed alpha-helical dimers and tetramers. They bound to DNA as dimers and their alpha-helical content increased on binding. Parallel and antiparallel four-helix models of the DNA-bound dimer were constructed. Peptides containing disulfide bonds were engineered to test the correctness of the two models. A disulfide that is compatible with the parallel model promotes specific interaction with DNA, whereas a disulfide compatible with the antiparallel model abolishes specific binding. Electron paramagnetic resonance (EPR) measurements of nitroxide-labeled peptides provided intersubunit distance measurements that also supported the parallel model.

Amino Acid Sequence↗

Crystallization of proton channel peptides.

Crystals have been grown of two similar peptides that form ion-conducting channels in diphytanoyl phosphatidylcholine bilayers. These crystals were grown by slow evaporation of the organic solvent, 2,2,2-trifluoroethanol. Crystals of one of the peptides have been characterized by X-ray diffraction, and X-ray data have been measured to 2.3 A resolution. Earlier it was proposed that the ion-conducting channels formed by these peptides consist of four peptides associated as a parallel alpha-helical tetramer. On the basis of the space group and unit cell dimensions of the crystals, a packing scheme for the peptide is proposed that is consistent with a tetrameric channel.

Amino Acid Sequence↗

Calmodulin binding to alpha 1-purothionin: solution binding and modeling of the complex.

CD and fluorescence spectroscopic measurements show that calmodulin (CaM) binds to purothionins (alpha 1-purothionin: alpha 1-PT; beta-purothionin: beta-PT) in 1:1 stoichiometry with an affinity similar to that exhibited with the tightest binding CaM-binding peptides. Using the available crystal structures of CaM and alpha 1-PT, a model has been built for the interaction of CaM and alpha 1-PT and subjected to potential energy minimization. In the model, there is a bend in the central helix of CaM similar to that suggested by Persechini and Kretsinger (J. Card. Pharm. 12:501-512, 1988). alpha 1-PT fits snugly into the cavity formed by the bent CaM molecule with each of its two helices making apolar interactions with each of the two hydrophobic clefts situated at the terminal domains of CaM. The complex is further stabilized by numerous polar and electrostatic interactions on the rims of the clefts. Our model is compared with two other similar models previously reported for the CaM complexes with other helical peptides and generalizations about the mode of CaM binding to target proteins are made, which have wide relevance to the function of CaM. By analogy, a similar model is predicted for a CaM-beta-PT complex.

Amino Acid Sequence↗

Identification of novel peptide antagonists for GPIIb/IIIa from a conformationally constrained phage peptide library.

Methods have recently been developed to present vast libraries of random peptides on the surface of filamentous phage. To introduce a degree of conformational constraint into random peptides, a library of hexapeptides flanked by cysteine residues (capable of forming cyclic disulfides) was constructed. This library was screened using the platelet glycoprotein, IIb/IIIa, which mediates the aggregation of platelets through binding of fibrinogen. A variety of peptides containing the sequence Arg-Gly-Asp or Lys-Gly-Asp were discovered and synthesized. The cyclic, disulfide-bonded forms of the peptides bound IIb/IIIa with dissociation constants in the nanomolar range, while reduced forms or an analogue in which Ser replaced the Cys residues bound considerably less tightly. These results demonstrate the feasibility for introducing conformational constraints into random peptide libraries and also demonstrates the potential for using phage peptide libraries to discover pharmacologically active lead compounds.

Amino Acid Sequence↗

Membrane fusion activity of the influenza virus hemagglutinin: interaction of HA2 N-terminal peptides with phospholipid vesicles.

We have investigated the interaction of a number of synthetic 20-residue peptides, corresponding to the HA2 N-terminus of the influenza virus hemagglutinin (X31 strain), with phospholipid vesicles and monolayers. Besides the wild-type sequence, two peptides were studied with mutations corresponding to those previously studied in entire HA's expressed in transfected cells [Gething et al., (1986) J. Cell. Biol. 102, 11-23]. These mutations comprised a single Glu replacement for Gly at the N-terminus ("El" mutant) or at position 4 ("E4") of the HA2 subunit and were shown to produce striking alterations in virus-induced hemolysis and syncytia formation, especially for E1. The X31 "wild-type" (wt) peptide and its E4 variant are shown here to have the capacity to insert into phosphatidylcholine (POPC) large unilamellar vesicle (LUV) membranes in a strictly pH-dependent manner, penetration being marginal at pH 7.4 and significant at pH 5.0. Bilayer insertion was evident from a shift in the intrinsic Trp fluorescence of the wt and E4 peptides and from the induction of calcein leakage from POPC LUV and correlated well with the peptides' ability at pH 5.0 to penetrate into POPC monolayers at initial surface pressures higher than 30 mN/m. By contrast, the E1 peptide was found, at pH 5.0, to bind less tightly to vesicles (assessed by a physical separation method) and to cause much less leakage of POPC LUV than the wt, even under conditions where the peptides were bound to approximately the same extent. Consistent with the correlation between leakage and penetration observed for the wt peptide at pH 5 versus 7, the E1 peptide, even at low pH, showed much less lipid-vesicle-induced shift of its Trp fluorescence than wt, caused a much slower rate of leakage of vesicle contents, and did not insert into POPC monolayers at surface pressures beyond 28.5 mN/m. Circular dichroism spectroscopy measurements of peptides in POPC SUV showed that the conformations of all three peptides are sensitive to pH, but only the wt and E4 peptides became predominantly alpha-helical at acid pH.

Amino Acid Sequence↗

DNA-induced increase in the alpha-helical content of C/EBP and GCN4.

Leucine zipper proteins comprise a recently identified class of DNA binding proteins that contain a bipartite structural motif consisting of a "leucine zipper" dimerization domain and a segment rich in basic residues responsible for DNA interaction. Protein fragments encompassing the zipper plus basic region domains (bZip) have previously been used to determine the conformational and dynamic properties of this motif. In the absence of DNA, the coiled-coil portion is alpha-helical and dimeric, whereas the basic region is flexible and partially disordered. Addition of DNA containing a specific recognition sequence induces a fully helical conformation in the basic regions of these fragments. However, the question remained whether the same conformational change would be observed in native bZip proteins where the basic regions might be stabilized in an alpha-helical conformation even in the absence of DNA, through interactions with portions of the protein not included in the bZip motif. We have now examined the DNA-induced conformational transition for an intact bZip protein, GCN4, and for the bZip fragment of C/EBP with two enhancers that are differentially symmetric. Our results are consistent with the induced helical fork model wherein the basic regions are largely flexible in the absence of DNA and become fully helical in the presence of the specific DNA recognition sequence.

Base Sequence↗

A thermodynamic scale for the helix-forming tendencies of the commonly occurring amino acids.

Amino acids have distinct conformational preferences that influence the stabilities of protein secondary and tertiary structures. The relative thermodynamic stabilities of each of the 20 commonly occurring amino acids in the alpha-helical versus random coil states have been determined through the design of a peptide that forms a noncovalent alpha-helical dimer, which is in equilibrium with a randomly coiled monomeric state. The alpha helices in the dimer contain a single solvent-exposed site that is surrounded by small, neutral amino acid side chains. Each of the commonly occurring amino acids was substituted into this guest site, and the resulting equilibrium constants for the monomer-dimer equilibrium were determined to provide a list of free energy difference (delta delta G degree) values.

Amino Acids↗

Phospholipid interactions of synthetic peptides representing the N-terminus of HIV gp41.

Peptides representing the N-terminal 23 residues of the surface protein gp41 of LAV1a and LAVmal strains of the human immunodeficiency virus were synthesized and their interactions with phospholipid vesicles studied. The peptides are surface-active and penetrate lipid monolayers composed of negatively charged but not neutral lipids. Similarly, the peptides induce lipid mixing and solute (6-carboxyfluorescein) leakage of negatively charged, but not neutral, vesicles. Circular dichroism and infrared spectroscopy show that at low peptide:lipid ratios (approximately 1:200), the peptides bind to negatively charged vesicles as alpha-helices. At higher peptide:lipid ratios (1:30), a beta conformation is observed for the LAV1a peptide, accompanied by a large increase in light scattering. The LAVmal peptide showed less beta-structure and induced less light scattering. With neutral vesicles, only the beta conformation and a peptide:lipid ratio-dependent increase in vesicle suspension light scattering were observed for both peptides. We hypothesize that the inserted alpha-helical form causes vesicle membrane disruption whereas the surface-bound beta form induces aggregation.

Amino Acid Sequence↗

Design of DNA-binding peptides based on the leucine zipper motif.

A class of transcriptional regulator proteins bind to DNA at dyad-symmetric sites through a motif consisting of (i) a "leucine zipper" sequence that associates into noncovalent, parallel, alpha-helical dimers and (ii) a covalently connected basic region necessary for binding DNA. The basic regions are predicted to be disordered in the absence of DNA and to form alpha helices when bound to DNA. These helices bind in the major groove forming multiple hydrogen-bonded and van der Waals contacts with the nucleotide bases. To test this model, two peptides were designed that were identical to natural leucine zipper proteins only at positions hypothesized to be critical for dimerization and DNA recognition. The peptides form dimers that bind specifically to DNA with their basic regions in alpha-helical conformations.

Amino Acid Sequence↗

Crystal structure of alpha 1: implications for protein design.

X-ray diffraction shows the structure of a synthetic protein model, formed from noncovalent self-association of a 12-residue peptide and of sulfate ions at low pH. This peptide is a fragment of a 16-residue polypeptide that was designed to form an amphiphilic alpha helix with a ridge of Leu residues along one helical face. By interdigitation of the leucines of four such helices, the design called for self-association into a four-alpha-helical bundle. The crystal structure (2.7 angstrom resolution; R factor = 0.215) reveals a structure more complex than the design, with both a tetramer and a hexamer. The alpha-helical tetramer with leucine interior has more oblique crossing angles than most four-alpha-helical bundles; the hexamer has a globular hydrophobic core of 12 leucine residues and three associated sulfate ions. Computational analysis suggests that the hexameric association is tighter than the tetrameric one. The consistency of the structure with the design is discussed, as well as the divergence.

Macromolecular Substances↗

Conformationally constrained alpha-helical peptide models for protein ion channels.

Recently we described the design, synthesis, and characterization of some simple amphiphilic alpha-helical models for protein ion channels. These peptides, composed of only Leu and Ser residues, are hypothesized to form helical bundles capable of passing ions across phospholipid bilayers. In an effort to demonstrate that the peptides are, in fact, helical in their active ion-conducting state, the conformationally constrained amino acid, C alpha, C alpha-dimethylglycine (alpha-aminoisobutyric acid, Aib), was introduced simultaneously at three positions into one of the model peptides, H2N-(Leu-Ser-Leu-Leu-Leu-Ser-Leu)3-CONH2, giving H2N-(Leu-Ser-Leu-Aib-Leu-Ser-Leu)3-CONH2. Examination of a tetrameric model for the channel suggested that this substitution should have a minimal effect on conductance. CD spectroscopy of the Aib-modified and original peptide in phospholipid vesicles indicated that both were highly alpha-helical. Furthermore, the Aib-containing peptide formed proton channels nearly identical in conductance to the original peptide.

Amino Acid Sequence↗

How calmodulin binds its targets: sequence independent recognition of amphiphilic alpha-helices.

Calmodulin (CaM) is a protein capable of recognizing positively charged, amphiphilic alpha-helical peptides independent of their precise amino acid sequences; this structural feature has also been found in many CaM-binding proteins. Recent work involving crystallography and site-directed mutagenesis of CaM along with studies of photoreactive and fluorescent CaM-binding peptides have helped define how calmodulin interacts with amphiphilic helices.

Amino Acid Sequence↗

Photolabeling of calmodulin with basic, amphiphilic alpha-helical peptides containing p-benzoylphenylalanine.

A novel photoreactive amino acid has been incorporated synthetically into two model peptides and the calmodulin-binding domain from myosin light chain kinase. Cross-linked photoadducts of each peptide with calmodulin have been prepared and digested by chemical and/or enzymatic methods to determine the site of label attachment. Depending on the position of the photoprobe in the peptide sequence, either Met-144 or Met-71 is photolabeled. These results are discussed in relation to the three-dimensional structure of calmodulin obtained crystallographically and the known solution properties of calmodulin.

Affinity Labels↗

Protein design, a minimalist approach.

The question of how the amino acid sequence of a protein specifies its three-dimensional structure remains to be answered. Proteins are so large and complex that it is difficult to discern the features in their sequences that contribute to their structural stability and function. One approach to this problem is de novo design of model proteins, much simpler than their natural counterparts, yet containing sufficient information in their sequences to specify a given function (for example, folding in aqueous solution, folding in membranes, or formation of ion channels). Designed proteins provide simple model systems for understanding protein structure and function.

Amino Acid Sequence↗

The interaction of calmodulin with fluorescent and photoreactive model peptides: evidence for a short interdomain separation.

Calmodulin is known to bind target enzymes and basic, amphiphilic peptides in a Ca2(+)-dependent manner. Recently, we introduced a photoaffinity label, p-benzoylphenylalanine (Bpa), into the sequence of a model, alpha-helical, calmodulin-binding peptide. When the Bpa residue was introduced at the third position of the peptide, Met-144 on the C-terminal domain of calmodulin was labeled, whereas when the photolabel was placed at the thirteenth position, Met-71 on the N-terminal domain was labeled. Assuming that both peptides bind in similar orientations, these results are not consistent with the crystal structure of calmodulin, in which the domains are held at a significant distance from one another by a long alpha-helical segment. To test the assumption that both peptides bind in similar orientations, we have synthesized a calmodulin-binding peptide with the photolabel in both the third and the thirteenth positions. Upon photolysis, this peptide forms a cross-link between Met-71 and Met-124 on the N- and C-terminal domains, respectively. Furthermore, a peptide with a Bpa in the thirteenth position and a Trp residue in the third position was also synthesized. After photocross-linking the Bpa residue of this peptide to Met-71 of calmodulin, it could be shown that the fluorescence properties of the Trp residue were consistent with its side chain being buried in a hydrophobic pocket on the C-terminal domain of calmodulin. These data indicate that, when complexed with basic, amphiphilic peptides, calmodulin can adopt a conformation in which its two domains are significantly closer than in the crystal structure of the uncomplexed protein.

Affinity Labels↗