Biomedical subjects
Publications and source records attributed to W G Rainer.
Testing of cardiac valve prostheses has been conducted primarily to ascertain flow patterns, fatigue, and thrombogenicity. The authors present their observations on valve dynamics, strain factors, and clinical correlations resulting from extensive experience in testing valve prostheses. They emphasize the need to retest valves that have undergone even minor modification.
Ceramic chip capacitors used in hybrid microelectronics for cardiac pacemakers are usually highly reliable. However, under certain conditions of capacitor construction, capacitor materials, mounting techniques, and environmental conditions, high failure rates may occur. A specific example is presented in which a ceramic capacitor used in an implanted pacemaker delaminated and failed approximately 30 days after being implanted. The failed capacitor caused a pulse rate rise, but due to circuit design techniques, the rate increase was limited to an acceptable value. The capacitor that failed was from an isolated lot of capacitors that was manufactured using pure palladium plates. The circuit containing this capacitor was hermetically sealed within a titanium case by welding. During the welding, a small amount of hydrogen was released from the titanium which, over a period of 2 to 4 weeks, was absorbed by the palladium plates in the capacitor. By absorbing the hydrogen, the palladium plates exhibit a volumetric expansion of sufficient magnitude to crack and delaminate the capacitor to the point of failure. Subsequently, the recurrence of this failure mode has been avoided by using capacitors containing special palladium alloys that cannot absorb hydrogen. This phenomenon is of interest to pacemaker designers since mercury batteries used in conventional pacemakers generate large amounts of hydrogen and potentially may be responsible for complications when used in conjunction with capacitors containing palladium.