Biomedical subjects

W Goodhue

Publications and source records attributed to W Goodhue.

3 recordsLinked to original sources

PubMed2006

Photoconductive optically driven deformable membrane under high-frequency bias: fabrication, characterization, and modeling.

The fabrication and characterization of an optically addressable deformable mirror for a spatial light modulator are described. Device operation utilizes an electrostatically driven pixelated aluminized polymeric membrane mirror supported above an optically controlled photoconductive GaAs substrate. A 5 mum thick grid of patterned photoresist supports the 2 mum thick aluminized Mylar membrane. A conductive ZnO layer is placed on the backside of the GaAs wafer. Similar devices were also fabricated with InP. A standard Michelson interferometer is used to measure mirror deformation data as a function of illumination, applied voltage, and frequency. The device operates as an impedance distribution between two cascaded impedances of deformable membrane substrate, substrate, and electrode. An analysis of device's operation under several bias conditions, which relates membrane deformation to operating parameters, is presented.

Journal Article↗

PubMed2006

Real-time holographic deconvolution techniques for one-way image transmission through an aberrating medium: characterization, modeling, and measurements.

We propose and demonstrate a new photorefractive real-time holographic deconvolution technique for adaptive one-way image transmission through aberrating media by means of four-wave mixing. In contrast with earlier methods, which typically required various codings of the exact phase or two-way image transmission for correcting phase distortion, our technique relies on one-way image transmission through the use of exact phase information. Our technique can simultaneously correct both amplitude and phase distortions. We include several forms of image degradation, various test cases, and experimental results. We characterize the performance as a function of the input beam ratios for four metrics: signal-to-noise ratio, normalized root-mean-square error, edge restoration, and peak-to-total energy ratio. In our characterization we use false-color graphic images to display the best beam-intensity ratio two-dimensional region(s) for each of these metrics. Test cases are simulated at the optimal values of the beam-intensity ratios. We demonstrate our results through both experiment and computer simulation.

Journal Article↗

PubMed2006

Optically driven microelectromechanical-system deformable mirror under high-frequency AC bias.

A new, optically addressed deformable mirror device is demonstrated. The device consists of a pixellated metalized polymeric membrane mirror supported above an optically addressed photoconductive substrate. A conductive transparent ZnO layer is deposited on the back side of the substrate. A very high-frequency AC bias is applied between the membrane and the back electrode of the device. The membrane is deformed when the back of the device is illuminated because of impedance and bias redistribution between two cascaded impedances. We fabricated, demonstrated, and modeled the operation of this device.

Journal Article↗