PubMed Health⌕ Search

Biomedical subjects

W R Frieben

Publications and source records attributed to W R Frieben.

11 recordsLinked to original sources
PubMed1983

Control of the aseptic processing environment.

Methods used by industry with applications to hospital pharmacy for maintaining an aseptic environment in production of sterile pharmaceutical products are discussed. A major source of product contamination is airborne microorganisms. The laminar-airflow workbench with a high-efficiency particulate air filter provides an ultraclean environment for preparation of sterile products. However, the workbench does not guarantee sterility of products and is not effective if not properly installed and maintained or if the operator uses poor aseptic technique. The laminar-airflow workbench should be tested for leaks, airflow velocity, and airflow patterns when installed, and the workbench should be checked periodically thereafter. The workbench should be placed in a cleanroom where traffic and air disturbances that might affect the laminar airflow are eliminated. A major source of airborne microbial contamination in cleanrooms is people. Personnel movement through an area and presence of personnel without lint-free, nonshedding protective garments increase the levels of microbial contaminants in an area. The transport of nonsterile products (bottles, boxes, paper products) into a cleanroom should be minimized. The cleanroom itself should be sanitized and should be immaculate. Microbial or particulate monitoring should be conducted in the cleanroom using a quantitative method, and corrective-action limits should be set. Hospital pharmacists should examine industrial sterile-processing techniques and apply them to the preparation of sterile products.

Air Microbiology↗
PubMed1975

Heterogeneity of enterotoxin-like protein extracted from spores fo Clostridium perfringens type A.

Enterotoxin-like protein was extracted from spores of three enterotoxin-positive and three enterotoxin-negative strains of Clostridium perfringens type A by urea/mercaptoethanol, alkaline mercaptoethanol and alkaline dithiothreitol. Disc immunoelectrophoresis demonstrated that three distinct enterotoxin-like proteins could be extracted. In 7% acrylamide gels, type I, type II, and type III enterotoxinlike proteins had relative mobilities of 0.52, 0.63, and 0.73 respectively. In contrast to disc immunoelectrophoresis, immunoelectrophoresis in agar gel demonstrated identical electrophoretic properties for the various entertoxin-like proteins. Immunoelectrofocusing experiments gave isoelectric points of 4.43, 4.43, 4.36, and 4.52 for purified entertoxin and type I, type II, and type III enterotoxin-like proteins respectively. Ferguson plots (i.e., log relative mobility versus acrylamide concentration) yielded nonparallel lines which intersected at a nonsieving concentration of acrylamide indicating that the various species of enterotoxin-like protein differed in size. Estimation of the molecular weight of purified enterotoxin and the three species of enterotoxin-like protein was done by comparing the slopes obtained in Ferguson plots with those obtained using proteins of a known molecular weight. Molecular weights of 38000, 36500, 23000, and 15400 were obtained for purified enterotoxin, type I, type II, and type III enterotoxin-like protein respectively. Collectively, the evidence indicates that fractionation of the different species of enterotoxin-like protein was due primarily to differences in their size, and that different forms of enterotoxin-like protein can be extracted from spores of different strains of C. perfringens type A.

Clostridium perfringens↗
PubMed1973

A paracrystalline inclusion formed during sporulation of enterotoxin-producing strains of Clostridium perfringens type A.

A large paracrystalline inclusion is formed by certain strains of Clostridium perfringens type A during spore morphogenesis. In most cell thin sections, the inclusion appeared rod-shaped when sectioned at an angle perpendicular to its longer axis, and circular or oval-shaped when sectioned at an angle parallel to its longer axis. Measurements performed on electron micrographs of inclusions sectioned to reveal the rod shape indicated a fairly consistent thickness (width) of 192 +/- 23 nm. The length of the inclusions varied considerably with a maximum of approximately 2,120 nm being observed. Ultrastructurally, the inclusion was composed of closely packed, periodically spaced, parallel layers. Usually a single inclusion was randomly located in the cytoplasm of the cell. Two inclusions per cell were rarely observed. The inclusion was formed only by ent(+) strains of C. perfringens. Mutants of the ent(+) strain NCTC 8798 that were altered in their sporulating and enterotoxin-producing capacities and revertants of these mutants were tested for inclusion formation. The results indicate that, as with the ent(+) trait, a direct relationship exists between inclusion formation and spore formation. The synthesis of enterotoxin, formation of a morphologically distinct inclusion, and the initial deposition of discontinuous coat fragments around the forespore appear to be events closely related in time during spore morphogenesis.

Clostridium↗
PubMed1969

Microgermination of Bacillus cereus spores.

The biphasic nature of germination curves of individual Bacillus cereus T spores was further characterized by assessing the effects of temperature, concentration of germinants, and some inorganic cations on microgermination. Temperature was shown to affect both phases of microgermination as well as the microlag period, whereas the concentration of l-alanine and supplementation with adenosine exerted a significant effect only on the microlag period. The germination curves of individual spores induced by inosine were also biphasic and resembled those of spores induced by l-alanine. High concentrations (0.1 m or higher) of calcium and other inorganic cations prolonged both phases of microgermination, particularly the second phase, and had a less pronounced effect on the microlag period. The second phase of microgermination was completely inhibited when spores were germinated either in the presence of 0.3 m CaCl(2) or at a temperature of 43 C; this inhibition was reversible. Observations on the germination of spore suspensions (kinetics of the release of dipicolinic acid and mucopeptides, loss of heat resistance, increase in stainability, decrease in turbidity and refractility) were interpreted on the basis of the biphasic nature of microgermination. Dye uptake by individual spores during germination appeared also to be a biphasic process.

Alanine↗
PubMed1969

Germination of single bacterial spores.

Changes in refractility and optical density occurring in individual spores of Bacillus cereus T and B. megaterium QM B1551 during germination were investigated by use of a Zeiss microscope photometer. The curves revealed that the germination process in single spores had two distinct phases; an initial rapid phase was followed by a second slower phase. Under the experimental condition employed, the first phase of germination of B. cereus spores lasted for approximately 75 +/- 15 sec, whereas the second phase lasted for 3 to 4.5 min. In B. megaterium spores, the first phase was observed to last for approximately 2 min and the second phase for more than 7 min. The duration of the second phase was dependent on conditions employed for germination. The kinetics of the first phase were strikingly similar under all conditions of physiological germination. Time-lapse phase-contrast microscopy of germinating spores also revealed the biphasic nature of germination. It was postulated that the first phase represents changes induced by an initial partial hydration of the spore and release into the medium of dipicolinic acid, whereas the second phase reflects degradation of the cortex and hydration of the core.

Bacillus cereus↗