PubMed HealthSearch

Biomedical subjects

W S Eakle

Publications and source records attributed to W S Eakle.

At least 19 recordsLinked to original sources

Stress-induced cervical lesions: review of advances in the past 10 years.

The accumulation of experimental and clinical evidence during the past decade has significantly contributed to the understanding of the role of occlusally generated tensile stress in the etiology of certain noncarious cervical lesions of teeth. More important, this knowledge has led to the understanding of the reasons why traditional restorative treatments of these stress-induced cervical lesions fail. The case of failure can be attributed to the occlusally generated stresses that are concentrated at the cervical region and result in debonding, leakage, retention failure, and, ultimately, restorative failure. With the new understanding, restorative approaches that combine chemical adhesion and restorative materials of appropriate elastic properties show promise of long-term success.

Bite Force

Dental erosion.

Explore the source record for details and available documents.

Beverages

Retention of posts cemented with various dentinal bonding cements.

This investigation evaluated the retention of preformed posts with four different cements: C & B Metabond, Panavia, All-Bond 2, and Ketac-Cem. Sixty intact maxillary canines were selected for the study. The clinical crowns were removed and endodontic therapy done on each root, which was then prepared to receive prefabricated posts. The 60 samples were divided into four groups of 15, and the posts in each group were cemented with one of the four cements. The roots were mounted in acrylic resin blocks and the posts were separated from the canals with an Instron testing machine. Analysis of the forces needed to dislodge the posts with analysis of variance and Student-Newman-Keuls test disclosed that C & B Metabond cement was the most retentive (p < 0.05). No difference in retention was recorded between Ketac-Cem and Panavia cements. All-Bond 2 cement was the least retentive of cements.

Analysis of Variance

Mechanical retention versus bonding of amalgam and gallium alloy restorations.

The retention of amalgam and gallium alloy restorations in proximal box forms was measured in vitro, and three different adhesives to conventional undercuts were compared. For control, restorations were placed without undercuts or adhesives. No significant difference was found between amalgam and gallium alloys with each of the five methods of retention used. Alloys placed without retention or adhesives were significantly less retentive than all other groups. When Tytin alloy was used, no difference was found in retention among the restorations retained with Panavia or All-Bond adhesive or an occlusal dovetail and retention grooves, but Amalgambond adhesive was less retentive than all three of these methods. When gallium alloy was used, both Panavia and All-Bond adhesive were more retentive than undercuts, but the effect of Amalgambond adhesive was more retentive than undercuts, but the effect of Amalgambond adhesive was comparable to that of undercuts. The results of this study indicate that adhesives could be used in place of traditional undercuts to retain amalgam and gallium alloys, thus saving a considerable amount of tooth structure.

Acid Etching, Dental

Effect of bonded amalgam on the fracture resistance of teeth.

The purpose of this study was to determine whether amalgam bonded to tooth structure with an adhesive resin cement can increase the fracture resistance of restored teeth. Extracted paired upper premolars were prepared for G.V. Black type mesioocclusodistal amalgam restorations. In one tooth of each pair (the experimental group), the enamel walls were etched with phosphoric acid and were painted with an adhesive resin (Panavia), and amalgam was condensed and carved. For the other tooth in each pair (the control group), amalgam was placed in the same manner but was not etched and lined with resin. The teeth were thermocycled and mounted for testing and then were loaded until fracture. A significant difference (p less than 0.05, the paired Student's t-test) was found in the force needed to fracture the bonded amalgam group (70.5 +/- 21.6 kg) compared with that needed to fracture the conventional amalgam group (60.3 +/- 16.8 kg). SEM examination of fractures at the interface occurred predominantly within the resin.

Acid Etching, Dental

Comparison of a subgingivally placed cannula oral irrigator tip with a supragingivally placed standard irrigator tip.

This study compared the depth of irrigation of periodontal pockets achieved by a cannula subgingival irrigator tip and a standard oral irrigator tip. They were tested on periodontally involved teeth recommended for extraction from 17 patients. Before extraction, reference grooves were made circumferentially in each study tooth at the level of the gingival margin. In one group of 5 patients (29 teeth), a cannula was inserted halfway into the pocket at the facial, mesiofacial, distofacial, lingual, mesiolingual and distolingual surfaces and the surface irrigated for 5 s at 5 psi with a solution of plaque-staining dye from an oral irrigator. A 2nd group of 7 patients (29 teeth) was tested similarly with a standard irrigating tip at 80 psi. A 3rd (control) group of 5 patients (26 teeth) rinsed with the dye solution. Teeth were then extracted. The distance on each tooth from the reference notch to the apical extent of the stained plaque, and also to the coronal limit of the connective tissue attachment, was measured at 4 sites (mesial, distal, buccal, lingual) under a dissecting microscope to determine the extent of dye penetration. Mean linear penetration for the control group was only 0.1 mm. Irrigation with the cannula tip penetrated farther into both the medium (3.5-6 mm) and the deep (greater than 6 mm) periodontal pockets (p less than 0.01) than did irrigation with the standard tip.(ABSTRACT TRUNCATED AT 250 WORDS)

Catheterization

Effect of bonded gold inlays on fracture resistance of teeth.

The purpose of this study was to determine if bonding gold inlays to tooth structure with an adhesive resin cement would increase the fracture resistance of restored teeth. Extracted paired maxillary premolars were prepared for mesio-occlusodistal inlays, and the inlays were cast in type II gold. In one tooth of each pair, the inlay was sandblasted with aluminium oxide, tin plated, and cemented with an adhesive resin into the etched preparation. For the other (control) tooth in each pair, the inlay was sandblasted and then cemented into the preparation with zinc phosphate cement. The teeth were thermocycled and loaded until fracture. The teeth in the bonded group had a statistically significantly higher fracture resistance than did the teeth in the control group. Scanning electron microscopic examination revealed that failure in the bonded group occurred predominantly within the resin.

Bicuspid

A clinical technique for bonding gold castings to teeth.

A clinical technique is presented that allows practitioners to use adhesive bonding techniques to improve the retention and seal of gold castings. At the time of delivery of a gold casting, the preparation is treated with a self-curing enamel and dentinal bonding agent. The internal surface of the casting is sandblasted and electroplated with tin to produce a surface suitable for bonding with a resin cement, which is virtually insoluble and is adhesive to both the metal surface and the treated tooth.

Acrylic Resins

Microleakage in MOD resin composite with three dentin bonding agents.

The extent of microleakage under MOD composites was studied when an aluminum oxalate dentin bonding agent (Tenure), a phosphonated resin bonding agent (Bondlite), and a glass-ionomer cement (Ketac Silver) were used. Three groups of 10 extracted molars were prepared with MOD cavities; one box ended on enamel, the other on cementum. In Group 1, Bondlite was applied to dentin and etched enamel before the sample was restored with a light-cured hybrid composite. In Group 2, a 2-mm increment of Ketac Silver was placed in each box before Bondlite and composite. In Group 3, Tenure was applied to dentin before being restored. Teeth were thermal-cycled, stained in silver nitrate, sectioned, and scored for microleakage. Microleakage along the gingival floor was significantly less at enamel margins than at cementum margins in all three groups. All groups showed severe marginal microleakage on cementum.

Composite Resins

Periodontal implications of orthodontic treatment in adults with reduced or normal periodontal tissues versus those of adolescents.

This longitudinal study monitored periodontal status in 20 adults and 20 adolescents undergoing fixed orthodontic treatment. Ten adults had generalized periodontitis and received periodontal treatment, including periodontal surgery, before orthodontic treatment. They also received periodontal maintenance at 3-month intervals during orthodontic treatment. The other 10 adults had normal periodontal tissues. Neither these latter adults nor the adolescents received periodontal maintenance during orthodontic treatment. Periodontal status was determined (1) at six standard sites before fixed appliances were placed (baseline), (2) at 1, 3, 6, 9, 12, and 18 months after appliances had been placed, and (3) 1, 3, 6, and 12 months after appliances had been removed. At each of these visits, these sites were assessed for plaque index, gingival index, bleeding tendency, and pocket depth. Loss of attachment between baseline and 3 months after appliances were removed and tooth loss were also determined. Complete data were obtained for 15 adolescents and 14 adults. During orthodontic treatment the adolescent group showed significantly more (p less than 0.05) periodontal inflammation and supragingival plaque than the adults; after appliances were removed, this pattern was no longer statistically significant. For loss of attachment, there were no significant differences among adolescents, adults with normal periodontal tissues, or adults with reduced but healthy periodontal tissues who had undergone treatment for periodontal disease. For tooth loss, three nonstudy site teeth with pockets deeper than 6 mm and/or furcation involvements were lost because of periodontal abscesses in the adult group treated for periodontal disease.

Adolescent

Incompletely fractured teeth--a survey of endodontists.

By means of questionnaires, 303 endodontists were asked about their experiences in the diagnosis and treatment of incompletely fractured teeth. The present article discloses the results relative to which teeth are most likely to fracture, which predisposing factors involve higher or lower risk, how endodontists prefer to treat root-fractured teeth, and the success rate they have had with them. The endodontists also reported the frequency of endodontic treatment failures attributable to root fractures. These results are discussed with respect to the potential implications for clinical dental practice.

Humans

Depth of penetration in periodontal pockets with oral irrigation.

The purpose of this study was to determine the effectiveness of the Water Pik oral irrigator as a vehicle for delivering an aqueous solution into periodontal pockets. Plaque-disclosing dye diluted with sterile saline solution was applied with the irrigator toward the gingival margins of teeth at 90 degrees and at 45 degrees prior to their extraction. The mean % penetration measured between a reference notch at the gingival crest and the periodontal ligament at the bottom of the pocket showed no statistical difference between the two angles of application. Penetration ranged from 44% to 71%, the lowest being into pockets 4-7 mm; higher mean penetration was noted in both subgroups 0-3 and greater than 7 mm. No statistical difference was found between proximal and facial or lingual surfaces, maxilla and mandible, existence of tooth contact, and proximal tissue contour or consistency. The mean % penetration was independent of pocket depth (chi 2 analysis). Correlation between pocket depth and mean penetration was low for all but one subgroup (90 degrees application and pockets greater than 7 mm). The results suggest that the oral irrigator will deliver an aqueous solution into periodontal pockets and will penetrate on average to approximately half the depth of the pockets.

Dental Devices, Home Care

Fracture resistance of teeth restored with class II bonded composite resin.

The purpose of this study was to determine whether composite resin bonded to enamel or to both enamel and dentin can increase the fracture resistance of teeth with Class II cavity preparations. Extracted maxillary pre-molars with MOD slot preparations were restored with composite resin bonded to enamel (P-30 and Enamel Bond) or composite resin bonded to enamel and dentin (P-30 and Scotch-bond). Teeth in a control group were prepared but left unrestored. All teeth were loaded occlusally in a universal testing machine until they fractured. Means of forces required to fracture teeth in each of the three groups were statistically compared (one-way ANOVA and Bonferroni t test). Teeth restored with combined enamel- and dentin-bonded composite resins were significantly more resistant to fracture than were similarly prepared but unrestored teeth and also than teeth restored with enamel-bonded composite resin (p less than 0.05). A significant difference was not demonstrated between the enamel-bonded group and the unrestored group. Further testing is needed to determine the durability of the bonds between tooth and restoration in the clinical setting.

Acid Etching, Dental

Reduced radiation-absorbed dose to tissues with partial panoramic radiography for evaluation of third molars.

The radiation-absorbed doses from panoramic radiography, distal molar radiography, and a partial panoramic radiographic technique that exposes only the third molar region to radiation are compared. Doses of radiation to the submandibular salivary gland were comparable by all three techniques, but doses of radiation to the head and neck were reduced greatly by the partial panoramic radiographic technique. Partial panoramic radiography is a diagnostically satisfactory and a radiologically safer technique for evaluation of third molar pathosis than is panoramic or distal molar radiography.

Head

Fractures of posterior teeth in adults.

Examined in this study were 191 patients with 206 complete or incomplete fractures of posterior teeth. The patients ranged in age from 14 to 76 years, with 66.5% younger than 40 years. The number of fractures occurring in each arch was almost equal. The mandibular first molar was the most frequently fractured posterior tooth. The lingual cusps of mandibular molars fractured more often than did the buccal cusps of mandibular molars by a ratio of 2 to 1. In maxillary molars, buccal and lingual cusps fractured with almost equal frequency, but, in maxillary premolars, the lingual cusps fractured slightly more often than buccal cusps. Data gathered on the widths of the isthmuses of restorations in 109 teeth showed that fewer fractures occurred in teeth with more conservative restorations, with widths of isthmuses a quarter of the inter-cusp distance, and intact marginal ridges.

Adolescent