PubMed Health⌕ Search

Biomedical subjects

W Saenger

Publications and source records attributed to W Saenger.

At least 37 records · Page 2Linked to original sources

DNA helicase RepA: cooperative ATPase activity and binding of nucleotides.

The steady-state kinetic parameters of the ATPase activity of the homohexameric DNA helicase RepA and the binding of the fluorescent analogue epsilonADP to RepA have been studied. ssDNA stimulates RepA ATPase activity optimally at acidic pH 5.3-6.0. The sigmoidal kinetic curves in both the absence and presence of ssDNA show strong positive cooperativity for ATP hydrolysis, with oligonucleotides longer than 10mer optimal for ssDNA-stimulated ATPase activity. Fluorescence titrations show that, at 25 degrees C and in the absence of DNA, the binding of epsilonADP to RepA is biphasic with three high (K(1) = 1.54 x 10(6) M(-1)) and three low (K(2) = 4.71 x 10(4) M(-)(1)) affinity binding sites differing by 30-40-fold in binding constants. In the absence of cofactors, RepA melts cooperatively at T(m) = 65.8 +/- 0.1 degrees C and is more stable in the presence of ATPgammaS, T(m) = 68.1 +/- 0.2 degrees C (DeltaDeltaG 0.95 kcal/mol), than in the presence of ADP, T(m) = 66. 5 +/- 0.1 degrees C (DeltaDeltaG 0.29 kcal/mol), indicating that the additional phosphate group in ATPgammaS has a significant influence on RepA structure. A model is proposed in which individual subunits of RepA sequentially and cooperatively perform a multistep ATP hydrolytic cycle.

Adenine Nucleotides↗

Interaction of different oligomeric states of hexameric DNA-helicase RepA with single-stranded DNA studied by analytical ultracentrifugation.

Analytical ultracentrifugation was used to determine the molecular mass, M, of hexameric DNA-helicase RepA at pH 5.8 and 7.6. At pH 7.6, a molecular mass of 179.5+/-2.6 kDa was found, consistent with the known hexameric state of RepA, (RepA)(6). At pH 5.8, (RepA)(6) associates to form a dimer with a molecular mass of 366.2+/-4.1 kDa. Analytical ultracentrifugation was also applied to characterize the interaction of single-stranded DNA (ssDNA) with the two different oligomeric states of (RepA)(6) at pH 5.8 and 7.6. The dissociation constants, K(d), for the equilibrium binding of (dA)(30) to the (RepA)(6) dimer at pH 5.8 and to (RepA)(6) at pH 7.6 were determined at 10 degrees C in the presence of 0.5 mM ATPgammaS, 10 mM MgCl(2) and 60 mM NaCl as K(d5.8)=0.94+/-0.13 microM at pH 5.8 and K(d7. 6)=25.4+/-6.4 microM at pH 7.6. The stoichiometries, n, for the two complexes (dA)(30)/(RepA)(6) dimer and (dA)(30)/(RepA)(6) at pH 5.8 and 7.6 were calculated from the corresponding binding curves. At pH 5.8 one (dA)(30) molecule was bound per (RepA)(6) dimer, while at pH 7.6 one (dA)(30) molecule was bound to one (RepA)(6). Binding curves were compatible with a single ssDNA binding site present on the (RepA)(6) dimer and on (RepA)(6), respectively, with no indication of cooperativity. (RepA)(6) tends to form larger aggregates under acidic conditions (pH<6.0) which are optimal for ssDNA binding. In contrast, at pH 5.8 in the presence of 60 mM NaCl, only the (RepA)(6) dimer was observed both in the absence and presence of (dA)(30).

Biopolymers↗

Crystal structure of octakis(2,3,6-tri-O-methyl)-gamma-cyclodextrin x 4.5 H2O: evidence for conformational flexibility of permethylated cyclodextrins.

Octakis(2,3,6-tri-O-methyl)-gamma-CD (TRIMEG) cocrystallized at 18 degrees C with 4.5 water molecules in the orthorhombic space group P2(1)2(1)2(1), unit cell dimensions a = 10.7879(3), b = 29.0580(9), c = 32.2909(11) A. The TRIMEG macrocycle is in a 'round' form with all glucose units oriented syn, and one O-6-CH3 methoxy group points 'toward' the molecular cavity. The TRIMEG x 4.5 H2O molecules are stacked to form infinite cylinders with the central cavities aligned into channels filled for each TRIMEG by 4.5 water molecules distributed over 15 partially occupied sites. This structure differs from the two known structures of TRIMEG in which two diametrically opposed glucoses are oriented anti to yield an 'elliptical' form, and their O-6-CH3 groups are directed 'toward' the cavity and close it at this side to form a bowl-shaped molecule.

Carbohydrate Conformation↗

A direct photo-activated affinity modification of tetracycline transcription repressor protein TetR(D) with tetracycline(1).

Results of a first successful application of a direct photo-induced affinity modification of Tet repressor (TetR(D)) protein with tetracycline within a complex of known three-dimensional structure are described. The conditions of the modification have provided suitable yields of the modified complex and allowed characterization of the modified segments of the protein. The potential of tetracycline as a fine modifying reagent was established. In the complex of TetR(D) protein with tetracycline, the antibiotic modifies at least two segments, Ile59-Glu73 and Ala173-Glu183, which form a binding tunnel for the drug according to the X-ray analysis. These data open possibilities for the use of different tetracycline targets for structural studies in solution.

Amino Acid Sequence↗

Colloidal properties of human transferrin receptor in detergent free solution.

The colloidal properties of transferrin receptor, isolated from human placenta, in detergent free solution has been investigated by light scattering techniques and analytical ultracentrifugation. In detergent free solution at 293.2 K, hTfR forms stable aggregates with an apparent hydrodynamic radius of 17 nm. The molecular mass was determined by ultracentrifugation to lie between (1722+/-87) kDa (sedimentation equilibrium) and (1675+/-46) kDa (sedimentation velocity). This implies that the aggregates are build up from nine hTfR dimers. Based on model calculations, which are in good agreement with the experimental data, we propose a torus-like structure for the aggregates. Upon pH shift from pH 7.5 to 5.0 or removal of the N-linked carbohydrate chains, formation of larger aggregates is induced. These aggregates can be described in terms of porous fractal structures. We propose a simple model, which accounts for that behaviour assuming that the aggregation is mainly due to the reduction of negative surface charge.

Circular Dichroism↗

The Tetracycline Repressor-A Paradigm for a Biological Switch.

The excessive use of antibiotics has enabled bacteria to develop resistance through a variety of mechanisms. The most common bacteriostatic action of the broad-spectrum antibiotic tetracycline (Tc) is by the inactivation of the bacterial ribosome so that the protein biosynthesis is interrupted and the bacteria die. The most common mechanism of resistance in gram-negative bacteria against Tc is associated with the membrane-intrinsic protein TetA, which exports invaded Tc out of the bacterial cell before it can attack its target, the ribosome. The expression of TetA is tightly regulated by the homodimeric Tet repressor (TetR)(2), which binds specifically with two helix-turn-helix motifs of operator DNA (tetO; K(ass) approximately 10(11) M(-1)) located upstream from the tetA gene on a plasmid or transposon. When Tc diffuses into the cell it chelates Mg(2+) and the complex [MgTc](+) binds to (TetR)(2) to form the induced complex (TetR small middle dot[MgTc](+))(2). This process is associated with conformational changes, which sharply reduce the affinity of (TetR)(2) to tetO, so that expression of TetA can take place, thus conferring resistance to the bacteria cells against Tc. Crystallographic studies show sequence-specific protein-nucleic acid interactions in the (TetR)(2) small middle dottetO complex and how the binding of two [MgTc](+) to (TetR)(2) enforces conformational changes that are stabilized by cooperative binding of two chains of eight water molecules each so that the formed (TetR small middle dot[MgTc](+))(2) is no longer able to recognize and bind to tetO. Since the switching mechanisms of the TetR/[MgTc](+) system is so tight, it has proven very useful in the regulation of eukaryotic gene expression and may also be applicable in gene therapy.

Journal Article↗

Crystal structure of amylomaltase from thermus aquaticus, a glycosyltransferase catalysing the production of large cyclic glucans.

Amylomaltase is involved in the metabolism of starch, one of the most important polysaccharides in nature. A unique feature of amylomaltase is its ability to catalyze the formation of cyclic amylose. In contrast to the well studied cyclodextrin glucanotransferases (CGTases), which synthesize cycloamylose with a ring size (degree of polymerization or DP) of 6-8, the amylomaltase from Thermus aquaticus produces cycloamyloses with a DP of 22 and higher. The crystal structure of amylomaltase from Thermus aquaticus was determined to 2.0 A resolution. It is a member of the alpha-amylase superfamily of enzymes, whose core structure consists of a (beta, alpha)(8) barrel. In amylomaltase, the 8-fold symmetry of this barrel is disrupted by several insertions between the barrel strands. The largest insertions are between the third and fifth barrel strands, where two insertions form subdomain B1, as well as between the second and third barrel strands, forming the alpha-helical subdomain B2. Whereas part of subdomain B1 is also present in other enzyme structures of the alpha-amylase superfamily, subdomain B2 is unique to amylomaltase. Remarkably, the C-terminal domain C, which is present in all related enzymes of the alpha-amylase family, is missing in amylomaltase. Amylomaltase shows a similar arrangement of the catalytic side-chains (two Asp residues and one Glu residue) as in previously characterized members of the alpha-amylase superfamily, indicating similar mechanisms of the glycosyl transfer reaction. In amylomaltase, a conserved loop of around eight amino acid residues is partially shielding the active center. This loop, which is well conserved among other amylomaltases, may sterically hinder the formation of small cyclic products.

Amino Acid Sequence↗

Crystal structure of hexakis(2,6-di-O-methyl)-alpha-cyclodextrin-acetonitrile dihydrate: a channel formed by methyl groups harbors a chain of five partially occupied water sites.

Hexakis(2,6-di-O-methyl)-alpha-cyclodextrin (DIMEA) crystallizes from 1:1 water-acetonitrile as DIMEA-acetonetril-dihydrate in the orthorhombic space group P2(1)2(1)2(1), unit cell dimensions a = 14.2775(5), b = 15.7312(5), c = 31.1494(11) A. Refinement of the structure against 5540 X-ray diffraction data converged at an R factor of 0.083. The macrocycle exhibits a 'round' conformation and is stabilized by intramolecular, interglucose O-3-H(n)...O-2(n + 1) and C-6-H(n)...O-5(n + 1) hydrogen bonds. Acetonitrile is included in the central cavity of DIMEA and held in position by C-5-H...N interactions. The two water molecules in the asymmetric units are distributed over six sites. One is fully occupied due to hydrogen bonding to O-3 groups of two symmetry-related DIMEA molecules, whereas the five remaining sites show occupancies between 0.15 and 0.25. These sites are in hydrogen bonding contact with O...O distances between 2.59 and 3.50 A and are located in infinite, hydrophobic channels parallel to the alpha-axis, which are coated with methyl groups of symmetry-related DIMEA.

Circular Dichroism↗

An integrated approach to structural genomics.

Structural genomics aims at determining a set of protein structures that will represent all domain folds present in the biosphere. These structures can be used as the basis for the homology modelling of the majority of all remaining protein domains or, indeed, proteins. Structural genomics therefore promises to provide a comprehensive structural description of the protein universe. To achieve this, a broad scientific effort is required. The Berlin-based "Protein Structure Factory" (PSF) plans to contribute to this effort by setting up a local infrastructure for the low-cost, high-throughput analysis of soluble human proteins. In close collaboration with the German Human Genome Project (DHGP) protein-coding genes will be expressed in Escherichia coli or yeast. Affinity-tagged proteins will be purified semi-automatically for biophysical characterization and structure analysis by X-ray diffraction methods and NMR spectroscopy. In all steps of the structure analysis process, possibilities for automation, parallelization and standardization will be explored. Major new facilities that are created for the PSF include a robotic station for large-scale protein crystallization, an NMR center and an experimental station for protein crystallography at the synchrotron storage ring BESSY II in Berlin.

Crystallography, X-Ray↗

Diffusion of water molecules in crystalline beta-cyclodextrin hydrates.

To understand the rapid diffusion mechanism of water molecules in the crystal lattice of hydrated beta-cyclodextrin (beta-CD), molecular dynamics (MD) simulations of crystalline beta-CD were performed at five different relative humidities corresponding to hydration states ranging from beta-CD-9.4H2O to beta-CD-12.3H2O, and in aqueous solution. The trajectories for the crystalline beta-CD hydrates had lengths of 4 ns each, whereas the simulation in aqueous solution extended to 2 ns. Transport of water molecules in the crystal was characterized in terms of a spatially varying diffusion constant and the main direction of diffusion, which were evaluated using newly developed algorithms. The main diffusion pathway winds through the cavities of adjacent doughnut shaped beta-CD molecules and is slightly slanted with respect to the crystallographic b-axis. Water molecules outside the beta-CD cavities have access to the main diffusion pathway. The diffusion constant for transport of water molecules along the main pathway calculated from the MD simulation data adopts 1/30 of the value in bulk water at room temperature. This is in agreement with estimates that can be made from experimental data on the adjustment of a beta-CD crystal to changes in relative humidity.

Algorithms↗

Structural basis of gene regulation by the tetracycline inducible Tet repressor-operator system.

The tetracycline repressor (TetR) regulates the most abundant resistance mechanism against the antibiotic tetracycline in grain-negative bacteria. The TetR protein and its mutants are commonly used as control elements to regulate gene expression in higher eukaryotes. We present the crystal structure of the TetR homodimer in complex with its palindromic DNA operator at 2.5 A resolution. Comparison to the structure of TetR in complex with the inducer tetracycline-Mg2+ allows the mechanism of induction to be deduced. Inducer binding in the repressor core initiates conformational changes starting with C-terminal unwinding and shifting of the short helix a6 in each monomer. This forces a pendulum-like motion of helix a4, which increases the separation of the attached DNA binding domains by 3 A, abolishing the affinity of TetR for its operator DNA.

Allosteric Regulation↗

X-ray structure of acarbose bound to amylomaltase from Thermus aquaticus. Implications for the synthesis of large cyclic glucans.

As a member of the alpha-amylase superfamily of enzymes, amylomaltase catalyzes either the transglycosylation from one alpha-1,4 glucan to another or an intramolecular cyclization. The latter reaction is typical for cyclodextrin glucanotransferases. In contrast to these enzymes, amylomaltase catalyzes the formation of cyclic glucans with a degree of polymerization larger than 22. To characterize the factors that determine the size of the synthesized cycloamyloses, we have analyzed the X-ray structure of amylomaltase from Thermus aquaticus in complex with the inhibitor acarbose, a maltotetraose derivative, at 1.9 A resolution. Two acarbose molecules are bound to the enzyme, one in the active site groove at subsite -3 to +1 and a second one approximately 14 A away from the nonreducing end of the acarbose bound to the catalytic site. The inhibitor bound to the catalytic site occupies subsites -3 to +1. Unlike the situation in other enzymes of the alpha-amylase family, the inhibitor is not processed and the inhibitory cyclitol ring of acarbose, which mimicks the half chair conformation of the transition state, does not bind to catalytic subsite -1. The minimum ring size of cycloamyloses produced by this enzyme is proposed to be determined by the distance of the specific substrate binding sites at the active site and near Tyr54 and by the size of the 460s loop. The 250s loop might be involved in binding of the substrate at the reducing end of the scissile bond.

Acarbose↗

Crystallization and preliminary X-ray analyses of catabolite control protein A, free and in complex with its DNA-binding site.

The catabolite control protein (CcpA) from Bacillus megaterium is a member of the bacterial repressor protein family GalR/LacI. CcpA with an N-terminal His-tag was used for crystallization. Crystals of free CcpA and of CcpA in complex with the putative operator sequence (catabolite responsive elements, CRE) were obtained by vapour-diffusion techniques at 291 K using the hanging-drop method. CcpA crystals grown in the presence of polyethylene glycol 8000 belong to the hexagonal space group P6(1)22 or P6(5)22, with unit-cell parameters a = 74.4, c = 238.8 A. These crystals diffract X-rays to 2.55 A resolution and contain one monomer of the homodimeric protein per asymmetric unit. Crystals of the CcpA-CRE complex were obtained with ammonium sulfate as precipitant and belong to the tetragonal space group I4(1)22, with unit-cell parameters a = 125, c = 400 A and one complex per asymmetric unit. Although these co-crystals grew to a sufficient size, X-ray diffraction was limited to 8 A resolution.

Amino Acid Sequence↗

Structural analysis of an RNase T1 variant with an altered guanine binding segment.

The ribonuclease T1 variant 9/5 with a guanine recognition segment, altered from the wild-type amino acid sequence 41-KYNNYE-46 to 41-EFRNWQ-46, has been cocrystallised with the specific inhibitor 2'-GMP. The crystal structure has been refined to a crystallographic R factor of 0.198 at 2.3 A resolution. Despite a size reduction of the binding pocket, pushing the inhibitor outside by 1 A, 2'-GMP is fixed to the primary recognition site due to increased aromatic stacking interactions. The phosphate group of 2'-GMP is located about 4.2 A apart from its position in wild-type ribonuclease T1-2'-GMP complexes, allowing a Ca(2+), coordinating this phosphate group, to enter the binding pocket. The crystallographic data can be aligned with the kinetic characterisation of the variant, showing a reduction of both, guanine affinity and turnover rate. The presence of Ca(2+) was shown to inhibit variant 9/5 and wild-type enzyme to nearly the same extent.

Amino Acid Sequence↗

Crystal structure of the purine nucleoside phosphorylase (PNP) from Cellulomonas sp. and its implication for the mechanism of trimeric PNPs.

The three-dimensional structure of the trimeric purine nucleoside phosphorylase (PNP) from Cellulomonas sp. has been determined by X-ray crystallography. The binary complex of the enzyme with orthophosphate was crystallized in the orthorhombic space group P212121 with unit cell dimensions a=64.1 A, b=108.9 A, c=119.3 A and an enzymatically active trimer in the asymmetric unit. X-ray data were collected at 4 degrees C using synchrotron radiation (EMBL/DESY, Hamburg). The structure was solved by molecular replacement, with the calf spleen PNP structure as a model, and refined at 2.2 A resolution. The ternary "dead-end" complex of the enzyme with orthophosphate and 8-iodoguanine was obtained by soaking crystals of the binary orthophosphate complex with the very weak substrate 8-iodoguanosine. Data were collected at 100 K with CuKalpha radiation, and the three-dimensional structure refined at 2.4 A resolution. Although the sequence of the Cellulomonas PNP shares only 33 % identity with the calf spleen enzyme, and almost no identity with the hexameric Escherichia coli PNP, all three enzymes have many common structural features, viz. the nine-stranded central beta-sheet, the positions of the active centres, and the geometrical arrangement of the ligands in the active centres. Some similarities of the surrounding helices also prevail. In Cellulomonas PNP, each of the three active centres per trimer is occupied by orthophosphate, and by orthophosphate and base, respectively, and small structural differences between monomers A, B and C are observed. This supports cooperativity between subunits (non-identity of binding sites) rather than existence of more than one binding site per monomer, as previously suggested for binding of phosphate by mammalian PNPs. The phosphate binding site is located between two conserved beta- and gamma-turns and consists of Ser46, Arg103, His105, Gly135 and Ser223, and one or two water molecules. The guanine base is recognized by a zig-zag pattern of possible hydrogen bonds, as follows: guanine N-1...Glu204 O(epsilon1)...guanine NH2...Glu204 O(epsilon2). The exocyclic O6 of the base is bridged via a water molecule to Asn246 N(delta), which accounts for the inhibitory, but lack of substrate, activity of adenosine. An alternative molecular mechanism for catalysis by trimeric PNPs is proposed, in which the key catalytic role is played by Glu204 (Glu201 in the calf and human enzymes), while Asn246 (Asn243 in the mammalian enzymes) supports binding of 6-oxopurines rather than catalysis. This mechanism, in contrast to that previously suggested, is consistent with the excellent substrate properties of N-7 substituted nucleosides, the specificity of trimeric PNPs versus 6-oxopurine nucleosides and the reported kinetic properties of Glu201/Ala and Asn243/Ala point variants of human PNP.

Amino Acid Sequence↗

The mycosubtilin synthetase of Bacillus subtilis ATCC6633: a multifunctional hybrid between a peptide synthetase, an amino transferase, and a fatty acid synthase.

Bacillus subtilis strain ATCC6633 has been identified as a producer of mycosubtilin, a potent antifungal peptide antibiotic. Mycosubtilin, which belongs to the iturin family of lipopeptide antibiotics, is characterized by a beta-amino fatty acid moiety linked to the circular heptapeptide Asn-Tyr-Asn-Gln-Pro-Ser-Asn, with the second, third, and sixth position present in the D-configuration. The gene cluster from B. subtilis ATCC6633 specifying the biosynthesis of mycosubtilin was identified. The putative operon spans 38 kb and consists of four ORFs, designated fenF, mycA, mycB, and mycC, with strong homologies to the family of peptide synthetases. Biochemical characterization showed that MycB specifically adenylates tyrosine, as expected for mycosubtilin synthetase, and insertional mutagenesis of the operon resulted in a mycosubtilin-negative phenotype. The mycosubtilin synthetase reveals features unique for peptide synthetases as well as for fatty acid synthases: (i) The mycosubtilin synthase subunit A (MycA) combines functional domains derived from peptide synthetases, amino transferases, and fatty acid synthases. MycA represents the first example of a natural hybrid between these enzyme families. (ii) The organization of the synthetase subunits deviates from that commonly found in peptide synthetases. On the basis of the described characteristics of the mycosubtilin synthetase, we present a model for the biosynthesis of iturin lipopeptide antibiotics. Comparison of the sequences flanking the mycosubtilin operon of B. subtilis ATCC6633, with the complete genome sequence of B. subtilis strain 168 indicates that the fengycin and mycosubtilin lipopeptide synthetase operons are exchanged between the two B. subtilis strains.

Adenosine Monophosphate↗

Analysis of engineered multifunctional peptide synthetases. Enzymatic characterization of surfactin synthetase domains in hybrid bimodular systems.

The combinatorial reorganization of distinct modules of multimodular peptide synthetases is of increasing interest for the generation of new peptides with optimized bioactive properties. Each module is at least composed of enzymatic domains responsible for the adenylation, thioester formation, and condensation of an amino acid residue of the final peptide product. We analyzed various possible fusion sites for the recombination of peptide synthetases and evaluated the impact of different recombination strategies on the amino acid adenylation and acyl-thioester formation activities of peptide synthetase modules. Hybrid bimodular peptide synthetases were generated by recombination of the corresponding reading frames encoding for L-glutamic acid- and L-leucine-specific modules of surfactin synthetase SrfA-A at presumed inner- and intradomainic regions. We demonstrate that fusions at a previously postulated hinge region, dividing the amino acid adenylating domains of peptide synthetase modules into two subdomains, and at the highly conserved 4'-phosphopantetheine binding motif in acyl-thioester forming domains resulted in enzymatically active hybrid domains. By contrast, most manipulations in condensation domains like deletions, the complete exchange or the construction of chimeric domains considerably reduced or completely abolished the amino acid adenylation and thioester formation activity of the hybrid module.

Adenosine Triphosphate↗