Biomedical subjects
Publications and source records attributed to W T Wozniak.
Origin of renal arteries was investigated in 76 cadavers. The right renal artery most of cases originated under the angle of 75 degrees. The left renal artery originated usually under the angle of 85 degrees. In investigated 152 kidneys the accessory renal vessels were observed in 17 specimens.
This article reviews the current status of standardization in orthodontic products. The role of the American National Standards Institute and the American Dental Association is described. A review of laboratory testing for the evaluation of frictional forces and bond strength in orthodontics is discussed. The need for standardization in test protocols is emphasized to obtain valuable interpretation and use of data generated by researchers. Standardization of test protocols will lead to improved standards for orthodontic products and ultimately higher-quality products for orthodontists and their patients.
Explore the source record for details and available documents.
For esthetic reasons, pigments and opacifiers are added to porcelains used in restorative dentistry. The purpose of this study was to use Kubelka-Munk theory (Kubelka and Munk, 1931) to predict and analyse the colors of porcelains modified by the addition of two pigments and an opacifying agent. The base porcelain was composed of 88% potassium feldspar, 6% quartz and 6% kaolin. The porcelain was modified by the addition of a yellow (Pr-Zr-Si) or a brown (Fe-Cr-Zn) stain and an opacifier (10% SnO in base porcelain). After firing at 1200 degrees C for 30 min, reflectance spectra of the various combinations were obtained with a spectrophotometer. Reflectance spectra, except at low wavelengths, were influenced by increased scattering due to the addition of the opacifier. Calculated values from Kubelka-Munk theory for absorption coefficients and scattering coefficients with appropriate correction factors were compared with the values from the reflectance spectra of the combinations. In general, good agreement was obtained if the scattering coefficient of the opacifier is set equal to 1.0. Using the L*a*b* transform of the CIE color space, it was found that this transform provided uniform color intervals for equal changes in pigment concentration.
Porcelains and resin composites exposed to acidulated phosphate fluorides (APF) have been reported to result in increased roughness, loss of weight, and loss of specular reflectance (gloss). Six samples of five commercial porcelains were subjected to five four-minute treatments with APF gels. Samples were then subjected to a nine-day cyclic staining procedure that utilized a tea, coffee, and mucin mixture. Changes in reflectance were then measured by means of a Minolta Chromameter (CR121) and converted to CIE L* a* b* values at illuminant D65 against a white background. delta L*, delta a*, delta b*, and delta E values were calculated. There was a substantial decrease in the L* value (lightness) for all porcelains. The average L* value for APF-treated and then stained porcelains was 43.6, for the stained-untreated samples, 48.2, and for untreated-unstained porcelain, 53.5. For three of the five porcelains, the differences in L* between treated and untreated stained porcelains were statistically significant. Changes in a* and b* values were also found to be consistent with but not as large as the changes in L*.
The irradiance in the wavelength of 450 to 500 nm of nine visible light-curing units was measured at 120 V input voltage. The highest irradiance was more than 20 times that of the lowest. Irradiance was also measured at 90 to 130 V input. Irradiance and depth of cure at lower input voltages were also examined.
Eyeglasses with protective filters are recommended for users of visible light-curing units to decrease the intensity of blue light reaching the eyes. The transmission curves of 20 commercially available filter glasses are obtained. The irradiance from eight curing units through these glasses is measured. The reduction in irradiance through the filter glasses is related to the transmission curves.
Explore the source record for details and available documents.
The ultraviolet light color stability of seven commercial composite resins was evaluated after 1, 8, and 15 days of exposure. Color differences between exposed and unexposed specimens stored for identical time periods were determined. Samples exposed to ultraviolet light showed large changes in Munsell Hue and Chroma, with smaller but significant changes in Value. Unexposed samples showed small changes in the Munsell components in some cases opposite those observed for the exposed samples. Statistical analysis showed that although significant color changes were observed, brands of composite resins could not be distinguished by length of storage in the dark. Time of exposure was a significant variable at 24 hours and 8 days. At 15 days a number of composite resins did not undergo additional significant color change. Scanning electron microscope showed a significant roughening of the surface of exposed composites with resin breakdown and exposure of the composite filler.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The translucency and colour of a composite resin are characterized by two wavelength-dependent parameters: the absorption coefficient, K and the scattering coefficient, S. These parameters were calculated according to the Kubelka-Munk (1931) equations for two commercial resins. The calculations were based on reflectance spectra of samples of different thicknesses which were placed on a black and a white background. Employing the values of these parameters, calculated spectra were obtained of samples on the same as well as different backgrounds. The difference between the experimental and the calculated spectra was evaluated in terms of Friele-MacAdam-Chickering (Hemmendinger, 1970) colour differences. The Munsell colour values, corresponding to the spectra were evaluated. It was found that the colour of a resin sample of a specified thickness which is placed on a particular background may be predicted to a fair degree of accuracy from calculations employing the K and S values of the resin and the reflectance spectrum of the background. It has been demonstrated that illuminating the sample at 45 degrees instead of using diffuse illumination, affected the results only to a small extent. The effect of internal reflections at the resin surface on the relfectivity on the sample is discussed. An expression has been derived for computing the reflectivity of a sample on any background from its transmittance and reflectivity on a completely absorbing background.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Luminescence spectra of several non-radioactive luminophors that may be suitable for dental porcelain have been obtained. It was found that porcelain composition and maturation temperature have large effects on excitation and emission spectra. Most of the luminophors had excitation maxima lower in wavelength than have been observed for natural teeth.
Explore the source record for details and available documents.