Biomedical subjects

Wan-Ju Li

Publications and source records attributed to Wan-Ju Li.

12 recordsLinked to original sources

PubMed2007

TGF-beta1 calcium signaling in osteoblasts.

Transforming growth factor-beta1 (TGF-beta1) action is known to be initiated by its binding to multiple cell surface receptors containing serine/threonine kinase domains that act to stimulate a cascade of signaling events in a variety of cell types. We have previously shown that TGF-beta1 and BMP-2 treatment of primary human osteoblasts (HOBs) enhances cell-substrate adhesion. In this report, we demonstrate that TGF-beta1 elicits a rapid, transient, and oscillatory rise in the intracellular Ca(2+) concentration, [Ca(2+)](i), that is necessary for enhancement of cell adhesion in HOBs but does not alter the phosphorylation state of Smad proteins. This rise in [Ca(2+)](i) in HOB is not observed in the absence of extracellular calcium or when the cells are treated with the L-type Ca(2+) channel blocker, nifedipine, but is stimulated upon treatment with the L-type Ca(2+) channel agonist, Bay K 8644, or under high K(+) conditions. The rise in [Ca(2+)](i) is severely attenuated after treatment of the cells with thapsigargin, a selective endoplasmic reticulum Ca(2+) pump inhibitor. TGF-beta1 enhancement of HOB adhesion to tissue culture polystyrene is also inhibited in cells treated with nifedipine. These data suggest that intracellular Ca(2+) signaling is an important second messenger of the TGF-beta1 signal transduction pathway in osteoblast function.

3-Pyridinecarboxylic acid, 1,4-dihydro-2,6-dimethy↗

PubMed2007

Nanobiomaterial applications in orthopedics.

Advancements in nanobiotechnology are revolutionizing our capability to understand biological intricacies and resolve biological and medical problems by developing subtle biomimetic techniques. Nanocomposites and nanostructured materials are believed to play a pivotal role in orthopedic research since bone itself is a typical example of a nanocomposite. This article reviews current strategies using nanobiomaterials to improve current orthopedic materials and examines their applications in bone tissue engineering. Preliminary investigations support the potential of nanobiomaterials in orthopedic applications; however, significant advancements are necessary to achieve clinical use. Overall, current trends in nanobiotechnology foreshadow a bright future through the use of nanobiomaterials in the orthopedic domain.

Biocompatible Materials↗

PubMed2006

Encapsulated chondrocyte response in a pulsatile flow bioreactor.

We have developed a bioreactor-based millifluidic technique that allows for dynamic culture conditions and measurement of the fluid flow impinging upon a three-dimensional tissue engineering scaffold. Chondrocytes in scaffolds have been shown to require mechanical stimulation to produce an extracellular matrix that resembles native cartilage. This study investigates the effect of pulsatile flow on chondrocyte response in a model poly(ethylene glycol) dimethacrylate hydrogel. Bovine chondrocytes were encapsulated in the hydrogel and cultured for 7, 14 and 21 days at pulsatile flow frequencies of 0.5 Hz (15ml/min) and 1.5Hz (17ml/min). The scaffolds cultured under dynamic conditions were compared to those cultured under static (non-flow) conditions. Quantitative real-time reverse transcription polymerase chain reaction was used to quantify collagen type I, collagen type II and aggrecan gene copy numbers as markers for chondrocyte phenotypic expression. Histological sections stained with hematoxylin & eosin, and Alcian blue confirmed chondrocyte morphology and matrix formation. Interestingly, regulation of the collagen type II gene was particularly sensitive to the flow conditions. The understanding of the cell response to encapsulation and flow could be used to identify the appropriate culture conditions necessary to design and develop hydrogel carriers to promote the formation of extracellular matrix as well as to further our knowledge of chondrocyte mechanobiology.

Animals↗

PubMed2006

Engineering controllable anisotropy in electrospun biodegradable nanofibrous scaffolds for musculoskeletal tissue engineering.

Many musculoskeletal tissues exhibit significant anisotropic mechanical properties reflective of a highly oriented underlying extracellular matrix. For tissue engineering, recreating this organization of the native tissue remains a challenge. To address this issue, this study explored the fabrication of biodegradable nanofibrous scaffolds composed of aligned fibers via electrospinning onto a rotating target, and characterized their mechanical anisotropy as a function of the production parameters. The characterization showed that nanofiber organization was dependent on the rotation speed of the target; randomly oriented fibers (33% fiber alignment) were produced on a stationary shaft, whereas highly oriented fibers (94% fiber alignment) were produced when rotation speed was increased to 9.3m/s. Non-aligned scaffolds had an isotropic tensile modulus of 2.1+/-0.4MPa, compared to highly anisotropic scaffolds whose modulus was 11.6+/-3.1MPa in the presumed fiber direction, suggesting that fiber alignment has a profound effect on the mechanical properties of scaffolds. Mechanical anisotropy was most pronounced at higher rotation speeds, with a greater than 33-fold enhancement of the Young's modulus in the fiber direction compared to perpendicular to the fiber direction when the rotation speed reached 8m/s. In cell culture, both the organization of actin filaments of human mesenchymal stem cells and the cellular alignment of meniscal fibroblasts were dictated by the prevailing nanofiber orientation. This study demonstrates that controllable and anisotropic mechanical properties of nanofibrous scaffolds can be achieved by dictating nanofiber organization through intelligent scaffold design.

Absorbable Implants↗

PubMed2006

Fabrication and characterization of six electrospun poly(alpha-hydroxy ester)-based fibrous scaffolds for tissue engineering applications.

The most common synthetic biodegradable polymers being investigated for tissue engineering applications are FDA approved, clinically used poly(alpha-hydroxy esters). To better assess the applicability of the electrospinning technology for scaffold fabrication, six commonly used poly(alpha-hydroxy esters) were used to prepare electrospun fibrous scaffolds, and their physical and biological properties were also characterized. Our results suggest that specific, optimized fabrication parameters are required for each polymer to produce scaffolds that consist of uniform structures morphologically similar to native extracellular matrix. Scanning electron microscopy (SEM) revealed a highly porous, three-dimensional structure for all scaffolds, with average fiber diameter ranging from 300nm to 1.5microm, depending on the polymer type used. The poly(glycolic acid) (PGA) and poly(d,l-lactic-co-glycolic acid 50:50) (PLGA5050) fibrous structures were mechanically stiffest, whereas the poly(l-lactic acid) (PLLA) and poly(epsilon-caprolactone) (PCL) scaffolds were most compliant. Upon incubation in physiological solution, severe structural destruction due to polymer degradation was found in the PGA, poly(d,l-lactic acid) (PDLLA), PLGA5050, and poly(d,l-lactic-co-glycolic acid 85:15) (PLGA8515) fibrous scaffolds, whereas PLLA and PCL fibrous scaffolds maintained a robust scaffold structure during the same time period, based on macroscopic and SEM observations. In addition, PLLA scaffolds supported the highest rate of proliferation of seeded cells (chondrocytes and mesenchymal stem cells) than other polymeric scaffolds. Our findings showed that PLLA and PCL based fibrous scaffolds exhibited the most optimal structural integrity and supported desirable cellular response in culture, suggesting that such scaffolds may be promising candidate biomaterials for tissue engineering applications.

Animals↗

PubMed2006

Chondrocyte phenotype in engineered fibrous matrix is regulated by fiber size.

A biomaterial scaffold acting as a functional substitute for the native extracellular matrix provides space for cell accommodation. In this study, we seeded chondrocytes, isolated from 4- to 6-month-old calves, in 2 types of poly(L-lactide) scaffolds, composed of micro- and nanofibers, and compared the effects on cellular activities. Scanning electron microscopy revealed a well-spread morphology for chondrocytes grown on microfibers. In contrast, chondrocytes on the nanofibers were found to have a rounded morphology and displayed a disorganized actin cytoskeletal structure compared to the organized cytoskeleton seen in well-spread chondrocytes culture on the microfibrous scaffold. Both scaffolds supported chondrocyte proliferation, with a higher rate seen in cultures in nanofibrous scaffold. Quantitative reverse transcription-polymerase chain reaction analysis showed that both cultures supported expression of collagen types I and II and aggrecan. Biochemical analysis showed a higher level of sulfated glycosaminoglycan in the nanofiber culture, confirmed by more intense alcian blue histologic staining. The nanofiber cultures also showed higher immunostaining for collagen types II and IX, aggrecan, and cartilage proteoglycan link protein. Based on these results, we conclude that chondrocytes respond differently to fibrous scaffolds of varying diameters, and that the scaffolds made of nanofibrous biomaterial promote efficient cell-based cartilage tissue engineering.

Aggrecans↗

PubMed2006

Cartilage tissue engineering: its potential and uses.

PURPOSE OF REVIEW: The prevalent nature of osteoarthritis, a cartilage degenerative disease that results in the erosion of joint surfaces and loss of mobility, underscores the importance of developing functional articular cartilage replacement. Recent research efforts have focused on tissue engineering as a promising approach for cartilage regeneration and repair. Tissue engineering is a multidisciplinary research area that incorporates both biological and engineering principles for the purpose of generating new, living tissues to replace the diseased/damaged tissue and restore tissue/organ function. This review surveys and highlights the current concepts and recent progress in cartilage tissue engineering, and discusses the challenges and potential of this rapidly advancing field of biomedical research. RECENT FINDINGS: Cartilage tissue engineering is critically dependent on selection of appropriate cells (differentiated or progenitor cells); fabrication and utilization of biocompatible and mechanically suitable scaffolds for cell delivery; stimulation with chondrogenically bioactive molecules introduced in the form of recombinant proteins or via gene transfer; and application of dynamic, mechanical loading regimens for conditioning of the engineered tissue constructs, including the design of specialized biomechanically active bioreactors. SUMMARY: Cell selection, scaffold design and biological stimulation remain the challenges of function tissue engineering. Successful regeneration or replacement of damaged or diseased cartilage will depend on future advances in our understanding of the biology of cartilage and stem cells and technological development in engineering.

Biocompatible Materials↗

PubMed2005

Multilineage differentiation of human mesenchymal stem cells in a three-dimensional nanofibrous scaffold.

Functional engineering of musculoskeletal tissues generally involves the use of differentiated or progenitor cells seeded with specific growth factors in biomaterial scaffolds. Ideally, the scaffold should be a functional and structural biomimetic of the native extracellular matrix and support multiple tissue morphogenesis. We have previously shown that electrospun, three-dimensional nanofibrous scaffolds that morphologically resemble collagen fibrils are capable of promoting favorable biological responses from seeded cells, indicative of their potential application for tissue engineering. In this study, we tested a three-dimensional nanofibrous scaffold fabricated from poly(epsilon-caprolactone) (PCL) for its ability to support and maintain multilineage differentiation of bone marrow-derived human mesenchymal stem cells (hMSCs) in vitro. hMSCs were seeded onto pre-fabricated nanofibrous scaffolds, and were induced to differentiate along adipogenic, chondrogenic, or osteogenic lineages by culturing in specific differentiation media. Histological and scanning electron microscopy observations, gene expression analysis, and immunohistochemical detection of lineage-specific marker molecules confirmed the formation of three-dimensional constructs containing cells differentiated into the specified cell types. These results suggest that the PCL-based nanofibrous scaffold is a promising candidate scaffold for cell-based, multiphasic tissue engineering.

Adipocytes↗

PubMed2003

Biological response of chondrocytes cultured in three-dimensional nanofibrous poly(epsilon-caprolactone) scaffolds.

Nanofibrous materials, by virtue of their morphological similarities to natural extracellular matrix, have been considered as candidate scaffolds for cell delivery in tissue-engineering applications. In this study, we have evaluated a novel, three-dimensional, nanofibrous poly(epsilon-caprolactone) (PCL) scaffold composed of electrospun nanofibers for its ability to maintain chondrocytes in a mature functional state. Fetal bovine chondrocytes (FBCs), maintained in vitro between passages 2 to 6, were seeded onto three-dimensional biodegradable PCL nanofibrous scaffolds or as monolayers on standard tissue culture polystyrene (TCPS) as a control substrate. Gene expression analysis by reverse transcription-polymerase chain reaction showed that chondrocytes seeded on the nanofibrous scaffold and maintained in serum-free medium supplemented with ITS+, ascorbate, and dexamethasone continuously maintained their chondrocytic phenotype by expressing cartilage-specific extracellular matrix genes, including collagen types II and IX, aggrecan, and cartilage oligomeric matrix protein. Specifically, expression of the collagen type IIB splice variant transcript, which is indicative of the mature chondrocyte phenotype, was up-regulated. FBCs exhibited either a spindle or round shape on the nanofibrous scaffolds, in contrast to a flat, well-spread morphology seen in monolayer cultures on TCPS. Organized actin stress fibers were only observed in the cytoplasm of cells cultured on TCPS. Histologically, nanofibrous cultures maintained in the supplemented serum-free medium produced more sulfated proteoglycan-rich, cartilaginous matrix than monolayer cultures. In addition to promoting phenotypic differentiation, the nanofibrous scaffold also supported cellular proliferation as evidenced by a 21-fold increase in cell growth over 21 days when the cultures were maintained in serum-containing medium. These results indicate that the biological activities of FBCs are crucially dependent on the architecture of the extracellular scaffolds as well as the composition of the culture medium, and that nanofibrous PCL acts as a biologically preferred scaffold/substrate for proliferation and maintenance of the chondrocytic phenotype. We propose that the PCL nanofibrous structure may be a suitable candidate scaffold for cartilage tissue engineering.

Actins↗

PubMed2003

Current state of cartilage tissue engineering.

Damage to cartilage is of great clinical consequence given the tissue's limited intrinsic potential for healing. Current treatments for cartilage repair are less than satisfactory, and rarely restore full function or return the tissue to its native normal state. The rapidly emerging field of tissue engineering holds great promise for the generation of functional cartilage tissue substitutes. The general approach involves a biocompatible, structurally and mechanically sound scaffold, with an appropriate cell source, which is loaded with bioactive molecules that promote cellular differentiation and/or maturation. This review highlights aspects of current progress in cartilage tissue engineering.

Animals↗

PubMed2002

Electrospun nanofibrous structure: a novel scaffold for tissue engineering.

The architecture of an engineered tissue substitute plays an important role in modulating tissue growth. A novel poly(D,L-lactide-co-glycolide) (PLGA) structure with a unique architecture produced by an electrospinning process has been developed for tissue-engineering applications. Electrospinning is a process whereby ultra-fine fibers are formed in a high-voltage electrostatic field. The electrospun structure, composed of PLGA fibers ranging from 500 to 800 nm in diameter, features a morphologic similarity to the extracellular matrix (ECM) of natural tissue, which is characterized by a wide range of pore diameter distribution, high porosity, and effective mechanical properties. Such a structure meets the essential design criteria of an ideal engineered scaffold. The favorable cell-matrix interaction within the cellular construct supports the active biocompatibility of the structure. The electrospun nanofibrous structure is capable of supporting cell attachment and proliferation. Cells seeded on this structure tend to maintain phenotypic shape and guided growth according to nanofiber orientation. This novel biodegradable scaffold has potential applications for tissue engineering based upon its unique architecture, which acts to support and guide cell growth.

Animals↗

PubMedDate not supplied

Human mesenchymal progenitor cell-based tissue engineering of a single-unit osteochondral construct.

A desirable strategy for articular cartilage repair is to surgically replace the damaged area with an in vitro-engineered osteochondral plug. We report here the development of a novel osteochondral construct using human trabecular bone-derived mesenchymal progenitor cells and a biodegradable poly-D,L-lactic acid scaffold. The cartilage layer was fabricated by press-coating a chondrifying high-density cell pellet onto the scaffold, which was then loaded with cells previously initiated to undergo osteogenesis. The composite was then cultured in a cocktail medium formulated to maintain both chondrogenesis and osteogenesis. Macroscopically, the construct consisted of a cartilage-like layer adherent to, and overlying, a dense bone-like component. RT-PCR, immunohistochemistry, and histology revealed hyaline-like cartilage and bone with an interface resembling the native osteochondral junction. All parameters, including mechanical properties, improved with increased culture time. The single-cell source nature of the construct, which minimizes handling while maximizing biocompatibility, suggests applicability for articular cartilage repair.

Absorbable Implants↗