Biomedical subjects

William C Wimley

Publications and source records attributed to William C Wimley.

11 recordsLinked to original sources

PubMed2006

The ERBB4/HER4 intracellular domain 4ICD is a BH3-only protein promoting apoptosis of breast cancer cells.

ERBB4/HER4 (referred to here as ERBB4) is a unique member of the epidermal growth factor receptor (EGFR) family of receptor tyrosine kinases. In contrast to the other three members of the EGFR family (i.e., EGFR, ERBB2/HER2/NEU, and ERBB3), which are associated with aggressive forms of human cancers, ERBB4 expression seems to be selectively lost in tumors with aggressive phenotypes. Consistent with this observation, we show that ERBB4 induces apoptosis when reintroduced into breast cancer cell lines or when endogenous ERBB4 is activated by a ligand. We further show that ligand activation and subsequent proteolytic processing of endogenous ERBB4 results in mitochondrial accumulation of the ERBB4 intracellular domain (4ICD) and cytochrome c efflux, the essential and committed step of mitochondrial regulated apoptosis. Our results indicate that 4ICD is functionally similar to BH3-only proteins, proapoptotic members of the BCL-2 family required for initiation of mitochondrial dysfunction through activation of the proapoptotic multi-BH domain proteins BAX/BAK. Similar to other BH3-only proteins, 4ICD cell-killing activity requires an intact BH3 domain and 4ICD interaction with the antiapoptotic protein BCL-2, suppressed 4ICD-induced apoptosis. Unique among BH3-only proteins, however, is the essential requirement of BAK but not BAX to transmit the 4ICD apoptotic signal. Clinically, cytosolic but not membrane ERBB4/4ICD expression in primary human breast tumors was associated with tumor apoptosis, providing a mechanistic explanation for the loss of ERBB4 expression during tumor progression. Thus, we propose that ligand-induced mitochondrial accumulation of 4ICD represents a unique mechanism of action for transmembrane receptors, directly coupling a cell surface signal to the tumor cell mitochondrial apoptotic pathway.

Amino Acid Sequence↗

PubMed2006

Inhibition of severe acute respiratory syndrome-associated coronavirus (SARS-CoV) infectivity by peptides analogous to the viral spike protein.

Severe acute respiratory syndrome-associated coronavirus (SARS-CoV) is the cause of an atypical pneumonia that affected Asia, North America and Europe in 2002-2003. The viral spike (S) glycoprotein is responsible for mediating receptor binding and membrane fusion. Recent studies have proposed that the carboxyl terminal portion (S2 subunit) of the S protein is a class I viral fusion protein. The Wimley and White interfacial hydrophobicity scale was used to identify regions within the CoV S2 subunit that may preferentially associate with lipid membranes with the premise that peptides analogous to these regions may function as inhibitors of viral infectivity. Five regions of high interfacial hydrophobicity spanning the length of the S2 subunit of SARS-CoV and murine hepatitis virus (MHV) were identified. Peptides analogous to regions of the N-terminus or the pre-transmembrane domain of the S2 subunit inhibited SARS-CoV plaque formation by 40-70% at concentrations of 15-30 microM. Interestingly, peptides analogous to the SARS-CoV or MHV loop region inhibited viral plaque formation by >80% at similar concentrations. The observed effects were dose-dependent (IC50 values of 2-4 microM) and not a result of peptide-mediated cell cytotoxicity. The antiviral activity of the CoV peptides tested provides an attractive basis for the development of new fusion peptide inhibitors corresponding to regions outside the fusion protein heptad repeat regions.

Amino Acid Sequence↗

PubMed2005

Rational combinatorial design of pore-forming beta-sheet peptides.

Exogenous polypeptides that self-assemble on biological membranes into pores are abundant and structurally diverse, functioning as transporters, toxins, ion channels, and antibiotics. A means for designing novel pore-forming sequences would unlock new opportunities for the development and engineering of protein function in membranes. Toward this goal, we designed a 9,604-member rational combinatorial peptide library based on the structural principles of known membrane-spanning beta-sheets. When the library was screened under stringent conditions for sequences with pore-forming activity, a single active motif was found, which is characterized by aromatic residues at the lipid-exposed interfacial positions and basic residues in the pore-lining portion of the sequence. Peptides with this motif assembled on bilayer membranes into beta-sheets and formed transient peptide/lipid pores of approximately 1-nm diameter. The mechanism of action is very similar to that of natural, pore-forming peptides. These methods provide a powerful means for selecting and engineering novel pore-forming sequences and will open prospects for designing peptide antibiotics, biosensors, and new membrane protein structures.

Amino Acid Sequence↗

PubMed2005

Forster resonance energy transfer in liposomes: measurements of transmembrane helix dimerization in the native bilayer environment.

The lipid bilayer vesicle is a model of the cellular membrane. Even in this simple system, however, measuring the thermodynamics of membrane protein association is a challenge. Here we discuss Forster resonance energy transfer (FRET) in liposomes as a method to probe the dimerization of transmembrane helices in a membrane environment. Although the measurements are labor intensive, FRET in liposomes can be measured accurately provided that attention is paid to sample homogeneity and sample equilibration. One must also take into account statistical expectations and the FRET that results from random colocalization of donors and acceptors in the bilayer. Without careful attention to these details, misleading results are easy to obtain in membrane FRET experiments. The results that we obtain in model systems are reproducible and depend solely on the concentration of the protein in the bilayer (i.e., on the protein-to-lipid ratio), thereby yielding thermodynamic parameters that are directly relevant to processes in biological membranes.

Dimerization↗

PubMed2005

The aromatic domain of the coronavirus class I viral fusion protein induces membrane permeabilization: putative role during viral entry.

Coronavirus (CoV) entry is mediated by the viral spike (S) glycoprotein, a class I viral fusion protein. During viral and target cell membrane fusion, the heptad repeat (HR) regions of the S2 subunit assume a trimer-of-hairpins structure, positioning the fusion peptide in close proximity to the C-terminal region of the ectodomain. The formation of this structure appears to drive apposition and subsequent fusion of viral and target cell membranes; however, the exact mechanism is unclear. Here, we characterize an aromatic amino acid rich region within the ectodomain of the S2 subunit that both partitions into lipid membranes and has the capacity to perturb lipid vesicle integrity. Circular dichroism analysis indicated that peptides analogous to the aromatic domains of the severe acute respiratory syndrome (SARS)-CoV, mouse hepatitis virus (MHV) and the human CoV OC43 S2 subunits, did not have a propensity for a defined secondary structure. These peptides strongly partitioned into lipid membranes and induced lipid vesicle permeabilization at peptide/lipid ratios of 1:100 in two independent leakage assays. Thus, partitioning of the peptides into the lipid interface is sufficient to disorganize membrane integrity. Our study of the S2 aromatic domain of three CoVs provides supportive evidence for a functional role of this region. We propose that, when aligned with the fusion peptide and transmembrane domains during membrane apposition, the aromatic domain of the CoV S protein functions to perturb the target cell membrane and provides a continuous track of hydrophobic surface, resulting in lipid-membrane fusion and subsequent viral nucleocapsid entry.

Amino Acid Sequence↗

PubMed2005

Identification and characterization of the putative fusion peptide of the severe acute respiratory syndrome-associated coronavirus spike protein.

Severe acute respiratory syndrome-associated coronavirus (SARS-CoV) is a newly identified member of the family Coronaviridae and poses a serious public health threat. Recent studies indicated that the SARS-CoV viral spike glycoprotein is a class I viral fusion protein. A fusion peptide present at the N-terminal region of class I viral fusion proteins is believed to initiate viral and cell membrane interactions and subsequent fusion. Although the SARS-CoV fusion protein heptad repeats have been well characterized, the fusion peptide has yet to be identified. Based on the conserved features of known viral fusion peptides and using Wimley and White interfacial hydrophobicity plots, we have identified two putative fusion peptides (SARS(WW-I) and SARS(WW-II)) at the N terminus of the SARS-CoV S2 subunit. Both peptides are hydrophobic and rich in alanine, glycine, and/or phenylalanine residues and contain a canonical fusion tripeptide along with a central proline residue. Only the SARS(WW-I) peptide strongly partitioned into the membranes of large unilamellar vesicles (LUV), adopting a beta-sheet structure. Likewise, only SARS(WW-I) induced the fusion of LUV and caused membrane leakage of vesicle contents at peptide/lipid ratios of 1:50 and 1:100, respectively. The activity of this synthetic peptide appeared to be dependent on its amino acid (aa) sequence, as scrambling the peptide rendered it unable to partition into LUV, assume a defined secondary structure, or induce both fusion and leakage of LUV. Based on the activity of SARS(WW-I), we propose that the hydrophobic stretch of 19 aa corresponding to residues 770 to 788 is a fusion peptide of the SARS-CoV S2 subunit.

Amino Acid Sequence↗

PubMed2004

Reversible unfolding of beta-sheets in membranes: a calorimetric study.

The hexapeptide acetyl-Trp-Leu(5) (AcWL(5)) has the remarkable ability to assemble reversibly and spontaneously into beta-sheets on lipid membranes as a result of monomer partitioning followed by cooperative assembly. This system provides a unique opportunity to study the thermodynamics of protein folding in membranes, which we have done using isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC). The results, which may represent the first example of reversible thermal unfolding of peptides in membranes, help to define the contribution of hydrogen bonding to the extreme thermal stability of membrane proteins. ITC revealed that the enthalpy change for partitioning of monomeric, unstructured AcWL(5) from water into membranes was zero within experimental error over the temperature range of 5 degrees C to 75 degrees C. DSC showed that the beta-sheet aggregates underwent a reversible, endothermic, and very asymmetric thermal transition with a concentration-dependent transition temperature (T(m)) in the range of 60 degrees C to 80 degrees C. A numerical model of nucleation and growth-dependent assembly of oligomeric beta-sheets, proposed earlier to describe beta-sheet formation in membranes, recreated remarkably well the unusual shape and concentration-dependence of the transition peaks. The enthalpy for thermal unfolding of AcWL(5) beta-sheets in the membrane was found to be about 8(+/-1)kcal mol(-1), or about 1.3(+/-0.2)kcal mol(-1) per residue.

Calorimetry↗

PubMed2004

Vibrational coupling, isotopic editing, and beta-sheet structure in a membrane-bound polypeptide.

The N-acetylated hexapeptide WLLLLL (AcWL5) partitions into lipid membranes and is believed to assemble into an antiparallel beta-sheet. As a test of this structural assignment, the peptide bonds of residues 2-6 were labeled with (13)C and allowed to adsorb onto a supported lipid membrane. Peptides bound to the membrane were examined for evidence of coupling between the labeled vibrational modes in adjacent beta-strands with internal reflection infrared spectroscopy. Experimental results indicate that the amide I absorption band in D(2)O (i.e., amide I') attributable to (13)C is selectively enhanced when the label is at any one of several positions along the peptide backbone. Simulations employing an excitonic model with through-bond and through-space interactions were performed on AcWL5 models in parallel and antiparallel beta-sheet configurations. The simulations yield spectra in good agreement with the experimental results, accounting for the enhancement of both (13)C band intensities and band frequencies. They also yield insight into the physical origin and structure selectivity of the distinctive amide I' band shapes that arise in isotopically edited spectra. It is concluded that the beta-sheet formed by membrane-bound AcWL5 is indeed antiparallel, and the enhancement of (13)C bands in the infrared spectra of these peptides is caused by both interstrand and intrastrand coupling to (12)C modes.

Amides↗

PubMed2003

Enzymatic E-colicins bind to their target receptor BtuB by presentation of a small binding epitope on a coiled-coil scaffold.

Toxins and viruses often initiate their attacks by binding to specific proteins on the surfaces of target cells. Bacterial toxins (e.g. bacteriocins) and viruses (bacteriophages) targeting Gram-negative bacteria typically bind to outer membrane proteins. Bacterial E-colicins target Escherichia coli by binding to the outer membrane cobalamin transporter BtuB. Colicins are tripartite molecules possessing receptor-binding, translocation, and toxin domains connected by long coiled-coil alpha-helices. Surprisingly, the crystal structure of colicin E3 does not possess a recognizable globular fold in its receptor-binding domain. We hypothesized that the binding epitope of enzymatic E-colicins is a short loop connecting the two alpha-helices that comprise the coiled-coil region and that this flanking coiled-coil region serves to present the loop in a binding-capable conformation. To test this hypothesis, we designed and synthesized a 34-residue peptide (E-peptide-1) corresponding to residues Ala366-Arg399 of the helix-loop-helix region of colicin E3. Cysteines placed near the ends of the peptide (I372C and A393C) enabled crosslinking for reduction of conformational entropy and formation of a peptide structure that would present the loop epitope. A fluorescent analog was also made for characterization of binding by measurement of fluorescence polarization. Our analysis shows the following. (i). E-peptide-1 is predominantly random coil in aqueous solution, but disulfide bond formation increases its alpha-helical content in both aqueous buffer and solvents that promote helix formation. (ii). Fluorescein-labeled E-peptide-1 binds to purified BtuB in a calcium-dependent manner with a Kd of 43.6 +/- 4.9 nm or 2370 +/- 670 nm in the presence or absence of calcium, respectively. (iii). In the presence of calcium, cyanocobalamin (CN-Cbl) displaces E-peptide-1 with a nanomolar inhibition constant (Ki = 78.9 +/- 5.6 nm). We conclude that the BtuB binding sites for cobalamins and enzymatic E-colicins are overlapping but inequivalent and that the distal loop and (possibly) the short alpha-helical flanking regions are sufficient for high affinity binding.

Amino Acid Sequence↗

PubMed2003

The versatile beta-barrel membrane protein.

The beta-barrel membrane protein is found in the outer membranes of bacteria, mitochondria and chloroplasts. Approximately 2-3% of the genes in Gram-negative bacterial genomes encode beta-barrels. Whereas there are fewer than 20 known three-dimensional beta-barrel structures, genomic databases currently contain thousands of beta-barrels belonging to dozens of families. New research is revealing the variety of beta-barrel structures and the variety of functions performed by these versatile proteins.

Bacterial Outer Membrane Proteins↗

PubMed2002

Toward genomic identification of beta-barrel membrane proteins: composition and architecture of known structures.

The amino acid composition and architecture of all beta-barrel membrane proteins of known three-dimensional structure have been examined to generate information that will be useful in identifying beta-barrels in genome databases. The database consists of 15 nonredundant structures, including several novel, recent structures. Known structures include monomeric, dimeric, and trimeric beta-barrels with between 8 and 22 membrane-spanning beta-strands each. For this analysis the membrane-interacting surfaces of the beta-barrels were identified with an experimentally derived, whole-residue hydrophobicity scale, and then the barrels were aligned normal to the bilayer and the position of the bilayer midplane was determined for each protein from the hydrophobicity profile. The abundance of each amino acid, relative to the genomic abundance, was calculated for the barrel exterior and interior. The architecture and diversity of known beta-barrels was also examined. For example, the distribution of rise-per-residue values perpendicular to the bilayer plane was found to be 2.7 +/- 0.25 A per residue, or about 10 +/- 1 residues across the membrane. Also, as noted by other authors, nearly every known membrane-spanning beta-barrel strand was found to have a short loop of seven residues or less connecting it to at least one adjacent strand. Using this information we have begun to generate rapid screening algorithms for the identification of beta-barrel membrane proteins in genomic databases. Application of one algorithm to the genomes of Escherichia coli and Pseudomonas aeruginosa confirms its ability to identify beta-barrels, and reveals dozens of unidentified open reading frames that potentially code for beta-barrel outer membrane proteins.

Bacterial Outer Membrane Proteins↗