Biomedical subjects

William F Guthrie

Publications and source records attributed to William F Guthrie.

4 recordsLinked to original sources

PubMed2006

Development of a nonrigid, durable calcium phosphate cement for use in periodontal bone repair.

BACKGROUND: Calcium phosphate cement (CPC) hardens in situ to form hydroxyapatite and has been used in dental and craniofacial restorative applications. However, when CPC was used in periodontal osseous repair, tooth mobility resulted in the fracture and exfoliation of the brittle CPC implant. The objective of the authors' study was to develop a strong and nonrigid CPC to provide compliance for tooth mobility without fracturing the implant. METHODS: The authors used tetracalcium phosphate, dicalcium phosphate anhydrous and biopolymer chitosan to develop a strong and nonrigid CPC. They used a powder:liquid ratio of 2:1, compared with the 1:1 ratio of a previously developed nonrigid CPC control. Specimens were characterized using a flexural test, scanning electron microscopy and powder X-ray diffraction. RESULTS: After 28 days of immersion, the new cement had a flexural strength (mean +/- standard deviation; n = 6) of 5.2 +/- 1.0 megapascals, higher than 1.8 +/- 1.5 MPa for the control (P < .05) and overlapping the reported strengths of sintered hydroxyapatite implants and cancellous bone. This cement showed a high ductility with a strain at peak load of 6.5 +/- 1.3 percent, compared with 4.4 +/- 1.9 percent for the control; both were 20-fold higher than the 0.2 percent of the conventional CPC. Nanosized hydroxyapatite crystals, similar to those in teeth and bones, were formed in the cements. CONCLUSIONS: The new nonrigid cement, containing nanohydroxyapatite crystals, possessed a high ductility and superior fracture resistance. This strong, tough and nonrigid CPC may be useful in periodontal repair to provide compliance for tooth mobility without fracture. CLINICAL IMPLICATIONS: The results of this study may yield the first self-hardening and nonrigid hydroxyapatite composite with high strength and durability and large deformation capability to be useful in the regeneration of periodontal osseous defects.

Alveolar Bone Loss↗

PubMed2004

Cell seeding into calcium phosphate cement.

To improve the effectiveness of calcium phosphate cement (CPC), we have developed a method to seed osteoblasts into the cement. CPC powder is mixed with water to form a paste that can be shaped to fit a bone defect in situ. The paste hardens in 30 min, reacts to form hydroxyapatite, and is replaced with new bone. Reacted CPC is biocompatible but unreacted CPC paste was found to have toxic effects when placed on cell monolayers (MC3T3-E1 cells). In contrast, when cells were indirectly exposed to CPC paste using a porous membrane or by placing a coverslip containing adherent cells onto a bed of CPC paste, the unreacted CPC was nontoxic. These results suggested that gel encapsulation of the cells might protect them from the CPC paste. Thus, cells were encapsulated in alginate beads (3.6-mm diameter), mixed with CPC paste, and incubated overnight. Both vital staining (calcein-AM and ethidium homodimer-1) and the Wst-1 assay (measures dehydrogenase activity) showed that cell survival in alginate beads that were mixed with CPC was similar to survival in untreated control beads. These results suggest that gel encapsulation could be used as a mechanism to protect cells for seeding into CPC.

Alginates↗

PubMed2003

Radiochemical neutron activation analysis for certification of ion-implanted phosphorus in silicon.

A radiochemical neutron activation analysis procedure has been developed, critically evaluated, and shown to have the necessary sensitivity, chemical specificity, matrix independence, and precision to certify phosphorus at ion implantation levels in silicon. 32P, produced by neutron capture of 31P, is chemically separated from the sample matrix and measured using a beta proportional counter. The method is used here to certify the amount of phosphorus in SRM 2133 (Phosphorus Implant in Silicon Depth Profile Standard) as (9.58 +/- 0.16) x 10(14) atoms x cm(-2). A detailed evaluation of uncertainties is given.

Journal Article↗

PubMed2002

Detection limit of isotope dilution mass spectrometry.

The detection limit is an important figure of merit for evaluating instrumentation and analytical methods. While the detection limit for techniques using linear calibration functions has been studied extensively, this fundamental metric has rarely been discussed for mass spectrometry that bases the calibration on the principle of isotope dilution. We have developed a formulation for the detection limit for isotope dilution mass spectrometry (IDMS) after a thorough analysis of the uncertainty of IDMS measurements. The new formulation describes the IDMS detection limit as a function of the enrichment of the isotopic spike and the linear calibration detection limits measured at the masses for the isotope ratio measurement.

Journal Article↗