Biomedical subjects

William J Landis

Publications and source records attributed to William J Landis.

12 recordsLinked to original sources

PubMed2006

Evaluation of bioreactor-cultivated bone by magnetic resonance microscopy and FTIR microspectroscopy.

We present a three-dimensional mineralizing model based on a hollow fiber bioreactor (HFBR) inoculated with primary osteoblasts isolated from embryonic chick calvaria. Using non-invasive magnetic resonance microscopy (MRM), the growth and development of the mineralized tissue around the individual fibers were monitored over a period of 9 weeks. Spatial maps of the water proton MRM properties of the intact tissue, with 78 microm resolution, were used to determine changes in tissue composition with development. Unique changes in the mineral and collagen content of the tissue were detected with high specificity by proton density (PD) and magnetization transfer ratio (MTR) maps, respectively. At the end of the growth period, the presence of a bone-like tissue was verified by histology and the formation of poorly crystalline apatite was verified by selected area electron diffraction and electron probe X-ray microanalysis. FTIR microspectroscopy confirmed the heterogeneous nature of the bone-like tissue formed. FTIR-derived phosphate maps confirmed that those locations with the lowest PD values contained the most mineral, and FTIR-derived collagen maps confirmed that bright pixels on MTR maps corresponded to regions of high collagen content. In conclusion, the spatial mapping of tissue constituents by FTIR microspectroscopy corroborated the findings of non-invasive MRM measurements and supported the role of MRM in monitoring the bone formation process in vitro.

Animals↗

PubMed2006

Comparison of different chondrocytes for use in tissue engineering of cartilage model structures.

This study compares bovine chondrocytes harvested from four different animal locations--nasoseptal, articular, costal, and auricular--for tissue-engineered cartilage modeling. While the work serves as a preliminary investigation for fabricating a human ear model, the results are important to tissue- engineered cartilage in general. Chondrocytes were cultured and examined to determine relative cell proliferation rates, type II collagen and aggrecan gene expression, and extracellular matrix production. Respective chondrocytes were then seeded onto biodegradable poly(L-lactide-epsilon-caprolactone) disc-shaped scaffolds. Cell-copolymer constructs were cultured and subsequently implanted in the subcutaneous space of athymic mice for up to 20 weeks. Neocartilage development in harvested constructs was assessed by molecular and histological means. Cell culture followed over periods of up to 4 weeks showed chondrocyte proliferation from the tissue sources varied, as did levels of type II collagen and aggrecan gene expression. For both genes, highest expression was found for costal chondrocytes, followed by nasoseptal, articular, and auricular cells. Retrieval of 20-week discs from mice revealed changes in construct dimensions with different chondrocytes. Greatest disc diameter was found for scaffolds seeded with auricular chondrocytes, followed by those with costal, nasoseptal, and articular cells. Greatest disc thickness was measured for scaffolds containing costal chondrocytes, followed by those with nasoseptal, auricular, and articular cells. Retrieved copolymer alone was smallest in diameter and thickness. Only auricular scaffolds developed elastic fibers after 20 weeks of implantation. Type II collagen and aggrecan were detected with differing expression levels on quantitative RT-PCR of discs implanted for 20 weeks. These data demonstrate that bovine chondrocytes obtained from different cartilaginous sites in an animal may elicit distinct responses during their respective development of a tissue-engineered neocartilage. Thus, each chondrocyte type establishes or maintains its particular developmental characteristics, and this observation is critical in the design and elaboration of any tissue-engineered cartilage model.

Aggrecans↗

PubMed2005

Non-destructive studies of tissue-engineered phalanges by magnetic resonance microscopy and X-ray microtomography.

One of the intents of tissue engineering is to fabricate biological materials for the augmentation or replacement of impaired, damaged, or diseased human tissue. In this context, novel models of the human phalanges have been developed recently through suturing of polymer scaffolds supporting osteoblasts, chondrocytes, and tenocytes to mimic bone, cartilage, and tendon, respectively. Characterization of the model constructs has been accomplished previously through histological and biochemical means, both of which are necessarily destructive to the constructs. This report describes the application of two complementary, non-destructive, non-invasive techniques, magnetic resonance microscopy (MRM) and X-ray microtomography (XMT or quantitative computed tomography), to evaluate the spatial and temporal growth and developmental status of tissue elements within tissue-engineered constructs obtained after 10 and 38 weeks of implantation in athymic (nude) mice. These two times represent respective points at which model middle phalanges are comprised principally of organic components while being largely unmineralized and later become increasingly more mineralized. The spatial distribution of mineralized deposits within intact constructs was readily detected by XMT (qCT) and was comparable to low intensity zones observed on MRM hydration maps. Moreover, the MRM-derived hydration values for mineralized zones were inversely correlated with mineral densities measured by XMT. In addition, the MRM method successfully mapped fat deposits, collagenous tissues, and the hydration state of the soft tissue elements comprising the specimens. These results support the application of non-destructive, non-invasive, quantitative MRM and XMT for the evaluation of constituent tissue elements within complex constructs of engineered implants.

Animals↗

PubMed2005

Analysis of connective tissues by laser capture microdissection and reverse transcriptase-polymerase chain reaction.

Studies of gene expression from bone, cartilage, and other tissues are complicated by the fact that their RNA, collected and pooled for analysis, often represents a wide variety of composite cells distinct in individual phenotype, age, and state of maturation. Laser capture microdissection (LCM) is a technique that allows specific cells to be isolated according to their phenotype, condition, or other marker from within such heterogeneity. As a result, this approach can yield RNA that is particular to a subset of cells comprising the total cell population of the tissue. This study reports the application of LCM to the gene expression analysis of the cartilaginous epiphyseal growth plate of normal newborn mice. The methodology utilized for this purpose has been coupled with real-time quantitative reverse transcriptase-polymerase chain reaction (QRT-PCR) to quantitate the expression of certain genes involved in growth plate development and calcification. In this paper, the approaches used for isolating and purifying RNA from phenotypically specific chondrocyte populations of the murine growth plate are detailed and illustrate and compare both qualitative and quantitative RT-PCR results. The technique will hopefully serve as a guide for the further analysis of this and other connective tissues by LCM and RT-PCR.

Animals↗

PubMed2005

The potential of tissue engineering in orthopedics.

This article presents models of human phalanges and small joints developed by tissue engineering. Biodegradable polymer scaffolds support growth of osteoblasts, chondrocytes, and tenocytes after implantation of the models in athymic mice. The cell-polymer constructs are vascularized by the host mice, form new bone, cartilage, and tendon with characteristic gene expression and protein synthesis and secretion, and maintain the shape of human phalanges with joints. The study demonstrates critical progress in the design and fabrication of bone, cartilage, and tendon by tissue engineering and the potential of this field for human clinical orthopedic applications.

Animals↗

PubMed2004

Experiments with osteoblasts cultured under hypergravity conditions.

To understand further the role of gravity in osteoblast attachment, osteoblasts were subjected to hypergravity conditions in vitro. Scanning electron microscopy of all confluent coverslips from FPA units show that the number of attached osteoblasts was similar among gravitational levels and growth durations (~90 cells/microscopic field). Specifically, confluent 1.0 G control cultures contained an average of 91 +/- 8 cells/field, 3.3 G samples had 88 +/- 8 cells/field, and 4.0 G cultures averaged 90 +/- 7 cells/field. The sparsely plated cultures assessed by immunohistochemistry also had similar numbers of cells at each time point (l.0 G was similar to 3.3 and 4.0 G), but cell number changed from one time point to the next as those cells proliferated. Immunohistochemistry of centrifuged samples showed an increase in number (up to 160% increase) and thickness (up to 49% increase) of actin fibers, a decrease in intensity of fibronectin fluorescence (18-23% decrease) and an increase in number of vinculin bulbs (202-374% increase in number of vinculin bulbs/area). While hypergravity exposure did not alter the number of attached osteoblasts, it did result in altered actin, fibronectin, and vinculin elements, changing some aspects of osteoblast- substrate adhesion.

Actins↗

PubMed2003

Analysis of osteopontin in mouse growth plate cartilage by application of laser capture microdissection and RT-PCR.

Gene expression of osteopontin (OPN) has been investigated in mice by application of laser capture microdissection (LCM) and reverse transcriptase-polymerase chain reaction (RT-PCR) analysis. LCM permits individual cells to be isolated ("captured") from tissue sections for molecular analyses. In this study, chondrocytes were captured from growth plate zones in frozen sections of tibiae from 1-11-day-old postnatal mice. RNA was extracted from cells, DNAse-treated, and reverse-transcribed. cDNA was amplified by PCR and OPN mRNA was revealed on agarose gels. Whole cartilage and brain (a positive control) from the same animals also were examined. Reactions containing no RT were negative controls, and 18S rRNA standardized expressed message from captured cells. RT-PCR analysis of laser-captured whole cartilage showed a general qualitative loss of OPN mRNA as animal age increased. Youngest mice gave equivalent OPN expression over all laser-microdissected cartilage zones. For 7-11 day-old mice, OPN expression was qualitatively greatest in resting and lowest in hypertrophic regions of cartilage. Expression of OPN correlated with mineral in the tissue suggests that OPN functionally may inhibit normal vertebrate growth plate mineralization, and its loss with increasing tissue maturation appears permissive to mineral development.

Animals↗

PubMed2002

The structure and function of normally mineralizing avian tendons.

The leg tendons of certain avian species normally calcify. The gastrocnemius, or Achilles, tendon of the domestic turkey, Meleagris gallopavo, is one such example. Its structure and biomechanical properties have been studied to model the adaptive nature of this tendon to external forces, including the means by which mineral deposition occurs and the functional role mineralization may play in this tissue. Structurally, the distal rounded, thick gastrocnemius bifurcates into two smaller proximal segments that mineralize with time. Mineral deposition occurs at or near the bifurcation, proceeding in a distal-to-proximal direction along the segments toward caudal and medial muscle insertions of the bird hip. Mineral formation appears mediated first by extracellular matrix vesicles and later by type I collagen fibrils. Biomechanical analyses indicate lower tensile strength and moduli for the thick distal gastrocnemius compared to narrow, fan-shaped proximal segments. Tendon mineralization here appears to be strain-induced, the muscle forces causing matrix deformation leading conceptually to calcium binding through the exposure of charged groups on collagen, release of sequestered calcium by proteoglycans, and increased diffusion. Functionally, the mineralized tendons limit further tendon deformation, reduce tendon strain at a given stress, and provide greater load-bearing capacity to the tissue. They also serve as important and efficient elastic energy storage reservoirs, increasing the amount of stored elastic energy by preventing flexible type I collagen regions from stretching and preserving muscle energy during locomotion of the animals.

Animals↗

PubMed2002

Vascular-mineral spatial correlation in the calcifying turkey leg tendon.

Certain avian tendons are known to mineralize normally in a gender-related manner. These tendons have unique properties, as well as several features common to calcifying cartilage and bone in other vertebrate species. In cartilage and bone, mineralization has been associated with a vascular and microvascular origin, but such a relationship has not been established in the avian tendon. Here the vasculature and mineral deposition in the calcifying leg tendon of the turkey have been documented for the first time utilizing a combination of histology, immunochemistry, radiology, and novel three-dimensional image reconstruction methods based on computed tomography. The data describe the blood supply to turkey leg tendon and show that the vascularity of this tissue is correlated with the onset of mineralization: At local levels of structural hierarchy, a vascular bed precedes mineral formation and the sites of vascular invasion correspond spatially with those of mineral deposition. Relatively unvascularized tendon regions remain uncalcified. These results support the concept that vascularization and mineralization are functionally related in the tendon, and they suggest that vascular invasion provides a mechanism underlying subsequent mineral deposition in this tissue.

Angiography↗

PubMedDate not supplied

Tissue engineering of an auricular cartilage model utilizing cultured chondrocyte-poly(L-lactide-epsilon-caprolactone) scaffolds.

To determine the potential development in vivo of tissue-engineered auricular cartilage, chondrocytes from articular cartilage of bovine forelimb joints were seeded on poly(L-lactic acid-epsilon-caprolactone) copolymer scaffolds molded into the shape of a human ear. Copolymer scaffolds alone in the same shape were studied for comparison. Chondrocyte-seeded copolymer constructs and scaffolds alone were each implanted in dorsal skin flaps of athymic mice for up to 40 weeks. Retrieved specimens were examined by histological and molecular techniques. After 10 weeks of implantation, cell-seeded constructs developed cartilage as assessed by toluidine blue and safranin-O red staining; a vascular, perichondrium-like capsule enveloped these constructs; and tissue formation resembled the auricular shape molded originally. Cartilage matrix formation increased, the capsule persisted, and initial auricular configuration was maintained through implantation for 40 weeks. The presence of cartilage production was correlated with RT-PCR analysis, which showed expression of bovine-specific type II collagen and aggrecan mRNA in cell-seeded specimens at 20 and 40 weeks. Copolymer scaffolds monitored only for 40 weeks failed to develop cartilage or a defined capsule and expressed no mRNA. Extensive vascularization led to scaffold erosion, decrease in original size, and loss of contour and shape. These results demonstrate that poly(L-lactic acid-epsilon-caprolactone) copolymer seeded with articular chondrocytes supports development and maintenance of cartilage in a human ear shape over periods to 40 weeks in this implantation model.

Animals↗

PubMedDate not supplied

Characterization of the cellular origin of a tissue-engineered human phalanx model by in situ hybridization.

Tissue-engineered models of human phalanges have previously been fabricated from a combination of bovine periosteum, cartilage, tendon, and biodegradable polyglycolic acid and poly-L-lactic acid scaffolds. Resulting constructs implanted in athymic mice for more than 40 weeks developed new bone, cartilage, and tendon and became vascularized, but cell types comprising the constructs were unidentified. The origin of cells in middle phalanx models implanted for 20 weeks in nude mice has been studied by in situ hybridization analyzing species-specific gene expression. Oligonucleotide probes homologous to species-specific gene sequences of bovine type II and X collagen, aggrecan, bone sialoprotein, biglycan, and osteopontin, and mouse decorin were labeled with (35)S and hybridized to respective serial sections of bovine tissue, mouse tissue, and phalanx constructs. In situ hybridization showed positive message and tissue-specific localization for all bovine-specific probes examined within cartilaginous and midshaft portions of constructs and negative message for the mouse-specific decorin probe. These data show that osteoblasts and chondrocytes comprising constructs are derived exclusively from their original bovine sources over 20 weeks of implantation. Defining the cellular origin of the models lends insight into their biological, chemical, and physical nature and their growth and development. Maintenance of their initial genotype is crucial for future application of the models in augmenting impaired human phalanges and related tissues.

Animals↗

PubMedDate not supplied

Osteoblasts subjected to spaceflight and simulated space shuttle launch conditions.

To understand further the effects of spaceflight on osteoblast-enriched cultures, normal chicken calvarial osteoblasts were flown aboard shuttle flight STS-77, and the total number of attached cells was determined. Spaceflight and control cultures were chemically fixed 3 h and 3 d after launch. These fixed cultures were processed for scanning electron microscopy (SEM). The SEM analysis showed that with just 3 d of exposure to spaceflight, coverslip cultures contained 300 +/- 100 cells/mm2, whereas 1G control samples contained a confluent monolayer of cells (2400 +/- 200 cells/mm2). Although the cultures flown in space experienced a drastic decline in cell number in just 3 d, without further experimentation it was impossible to determine whether the decline was a result of microgravity, the harsh launch environment, or some combination of these factors. Therefore, this research attempted to address the effect of launch by subjecting osteoblasts to conditions simulating shuttle launch accelerations, noise, and vibrations. No differences, compared with controls, were seen in the number of total or viable cells after exposure to these various launch conditions. Taken together, these data indicate that the magnitude of gravitational loading (3G maximum) and vibration (7.83G rms maximum) resulting from launch does not adversely affect osteoblasts in terms of total or viable cell number immediately, but launch conditions, or the microgravity environment itself, may start a cascade of events that over several d contributes to cell loss.

Animals↗