Biomedical subjects

Wolfgang Buchalla

Publications and source records attributed to Wolfgang Buchalla.

7 recordsLinked to original sources

PubMed2006

External bleaching therapy with activation by heat, light or laser--a systematic review.

OBJECTIVE: External bleaching procedures utilizing highly concentrated 30-35% hydrogen peroxide solutions or hydrogen peroxide releasing agents can be used for tooth whitening. To enhance or accelerate the whitening process, heat-activation of the bleaching agent by light, heat or laser is described in the literature. The aim of the present review article was to summarize and discuss the available information concerning the efficacy, effects and side effects of activated bleaching procedures. SOURCES: Information from all original scientific full papers or reviews listed in PubMed or ISI Web of Science (search term: (bleaching OR brightening OR whitening OR colour) AND (light OR laser OR heat OR activation)) were included in the review. DATA: Existing literature reveals that activation of bleaching agents by heat, light or laser may have an adverse effect on pulpal tissue due to an increase of intra-pulpal temperature exceeding the critical value of 5.5 degrees C. Available studies do not allow for a final judgment whether tooth whitening can either be increased or accelerated by additional activation. CONCLUSION: Therefore, application of activated bleaching procedures should be critically assessed considering the physical, physiological and patho-physiological implications.

Humans↗

PubMed2006

Review on fluoride-releasing restorative materials--fluoride release and uptake characteristics, antibacterial activity and influence on caries formation.

OBJECTIVES: The purpose of this article was to review the fluoride release and recharge capabilities, and antibacterial properties, of fluoride-releasing dental restoratives, and discuss the current status concerning the prevention or inhibition of caries development and progression. METHODS: Information from original scientific full papers or reviews listed in PubMed (search term: fluoride release AND (restorative OR glass-ionomer OR compomer OR polyacid-modified composite resin OR composite OR amalgam)), published from 1980 to 2004, was included in the review. Papers dealing with endodontic or orthodontic topics were not taken into consideration. Clinical studies concerning secondary caries development were only included when performed in split-mouth design with an observation period of at least three years. RESULTS: Fluoride-containing dental materials show clear differences in the fluoride release and uptake characteristics. Short- and long-term fluoride releases from restoratives are related to their matrices, setting mechanisms and fluoride content and depend on several environmental conditions. Fluoride-releasing materials may act as a fluoride reservoir and may increase the fluoride level in saliva, plaque and dental hard tissues. However, clinical studies exhibited conflicting data as to whether or not these materials significantly prevent or inhibit secondary caries and affect the growth of caries-associated bacteria compared to non-fluoridated restoratives. SIGNIFICANCE: Fluoride release and uptake characteristics depend on the matrices, fillers and fluoride content as well as on the setting mechanisms and environmental conditions of the restoratives. Fluoride-releasing materials, predominantly glass-ionomers and compomers, did show cariostatic properties and may affect bacterial metabolism under simulated cariogenic conditions in vitro. However, it is not proven by prospective clinical studies whether the incidence of secondary caries can be significantly reduced by the fluoride release of restorative materials.

Cariostatic Agents↗

PubMed2005

Effect of topical fluoride application on toothbrushing abrasion of resin composites.

OBJECTIVES: This in vitro study assesses toothbrushing abrasion of a microfill (Heliomolar Radioopaque) and a hybrid composite (Herculite XRV) after application of two acidic fluoride agents. METHODS: Thirty-six specimens of each resin composite were fabricated, ground flat and polished. Subsequently the 36 samples of each material were evenly assigned to three groups. In the first group, samples were treated with the fluoride varnish Bifluorid 12 (5.5% F, pH 5.6), in the second group with Elmex Fluid (1.25% F, pH 4.3). In the third group, specimens remained unfluoridated (controls). After 8h, the samples were subjected to toothbrushing abrasion (2000 brushing strokes, load: 250 g) in an abrasive slurry. Fluoridation and brushing abrasion were repeated twice. Afterwards, abrasion of the materials was quantitatively determined with a laser profilometer and statistically analyzed (ANOVA). RESULTS AND SIGNIFICANCE: With Herculite both, Bifluorid 12 (P = 0.0001) and Elmex Fluid (P = 0.0001) led to a significant increase of brushing abrasion compared to the non-fluoridated group. However, no significant difference was observed between the two fluoridation regimes. Heliomolar showed a tendency towards higher abrasion after treatment with Elmex Fluid compared to Bifluorid 12 (P = 0.0496) and the non-fluoridated group (P = 0.0496), whereas treatment with Bifluorid 12 yielded no significant difference compared to the non-fluoridated Heliomolar specimens. Fluoridation of Herculite resulted in a 106-121% increase of abrasion, whereas Heliomolar only showed an increase by 5-30%. Application of the acidic fluoride products used led to an increase in toothbrushing abrasion of the tested composite restorative materials. However, clinical long-term studies are needed to determine the effect of topical fluoride regimes on resin composite materials.

Acrylic Resins↗

PubMed2004

Comparative fluorescence spectroscopy of root caries lesions.

In this study, the light-emission properties of carious and sound root surfaces were investigated under a wide range of excitation wavelengths. Human molar teeth with exposed root surfaces containing light- and dark-discolored root caries (n = 3 of each) were selected. Emission spectra were recorded from carious and corresponding sound root surface areas from each tooth by using a fluorescence spectrophotometer at excitation wavelengths from 360 nm up to 580 nm, in steps of 20 nm. The spectra were corrected for fluctuations in detector sensitivity and excitation light intensity, and normalized to peak intensity. Excitation spectra were recorded for selected emission wavelengths that showed maximum intensity. Light- and dark-discolored root surface caries showed distinct fluorescence emission bands between 600 and 700 nm that were not present in sound root surface areas. These bands were strongest for excitation wavelengths between 390 and 420 nm. The excitation spectra of root caries revealed maximum excitation at around 405 nm, which is equivalent to the Soret band of porphyrin compounds. The emission spectra of both types of root caries lesions were shifted towards longer wavelengths (red shift at half maximum) when compared to the spectra of corresponding sound root surfaces. The red shift for dark-discolored root caries was higher than for light-discolored lesions at all excitation wavelengths.

Color↗

PubMed2003

[Influence of the buffer capacity of amine fluoride-containing toothpastes and gels in enamel erosion].

The aim of the study was to evaluate the abrasion resistance of eroded enamel brushed with experimental toothpastes and fluoride gels of varying buffering capacities. 50 Specimens were prepared from extracted human molars and cycled through three alternating de- and remineralizations including brushing abrasion in a brushing machine. Demineralization was accomplished by immersing the samples in 1% citric acid (5 min), remineralization occurred during immersing the samples in artificial saliva (1 min). Groups of ten samples were brushed with either one of the toothpaste (A-C) or one of the fluoridated gels (D-E). Toothpastes and gels were produced on the basis of elmex toothpaste or elmex-gelée (GABA International AG, Switzerland). Amount of titrable acid was defined as amount (mg) of 1 N KOH needed for neutralization of 1 g toothpaste or gel (A: 6 mg, B: 12 mg, C: 24 mg, D: 3.1 mg, E: 10 mg KOH). The following abrasion values (mean + S.D. [micron]) were obtained profilometrically: A: 6.76 +/- 2.05, B: 6.84 +/- 1.19, C: 8.28 +/- 2.89, D: 4.19 +/- 1.09 and E: 0.83 +/- 0.61. No significant difference in abrasion between the toothpastes was found. The fluoride gel with the higher buffering capacity (E) exhibited significantly less abrasion than the gel with the lower buffering capacity (D). It is concluded that in eroded enamel buffering capacity of the tested fluoridated toothpastes has no effect on abrasion, whereas use of fluoride gel with a higher buffering capacity leads to reduced abrasion values.

Amines↗

PubMed2002

The effect of water storage and light exposure on the color and translucency of a hybrid and a microfilled composite.

STATEMENT OF PROBLEM: Internal discoloration may occur with the intraoral use of resin-based restoration materials. Water storage and light exposure influence the color properties of microfilled and hybrid composites. PURPOSE: The purpose of this study was to determine color and translucency changes in a hybrid and a microfilled composite after light exposure with and without water storage. MATERIAL AND METHODS: A hybrid (Tetric) and a microfilled composite (Silux Plus) were subjected to artificial daylight with and without water storage. Tristimulus Yxy values were determined colorimetrically against a black or a white background. Differences from baseline were calculated as Delta E*(ab) for up to 1 month. After 1 month, Delta L*, Delta a*, Delta b*, and the contrast ratio Delta C were calculated. Data were analyzed with 2-way analysis of variance (P<.05). RESULTS: The Delta E(ab)* increased over time for wet and dry stored specimens of both materials. Wet storage for 1 month resulted in significantly higher Delta E(ab)* and Delta C but lower Delta b* than dry storage. The Delta a* was significantly higher for Tetric compared with Silux Plus. Both materials showed negative Delta L* values under both storage conditions without significant differences between materials or storage conditions. CONCLUSION: The results of this in vitro study suggest that resin-based restoration materials undergo measurable changes due to daylight exposure. Increased changes occurred under the influence of water storage.

Analysis of Variance↗

PubMedDate not supplied

Efficiency of 4 caries excavation methods compared.

UNLABELLED: This in vitro study compared the efficiency (time taken to excavate and successfully remove bacterially infected dentin) of Fluorescence Aided Caries Excavation (FACE), caries detector dye (CD), chemomechanical excavation (CS) and conventional excavation (CE). Teeth with dentin caries were assigned to 4 groups (n= 25). Caries excavation was carried out by one operator. In the FACE group, the operating field was illuminated with violet light. The operator observed the teeth through a high-pass filter and removed orange-red fluorescing areas with a slow speed bur. In the CS group, Carisolv was applied to the cavity using CS hand instruments and allowed to act for 30 seconds before caries was removed. In the CD group, caries was removed using the Caries Detector and, in the CE group, conventional excavation was carried out using visual-tactile criteria. The excavation time was recorded. Undecalcified thin slices (8 microm) were prepared, stained with giemsa and examined using light microscopy. The excavation time (median) was significantly shorter for FACE (3 minutes, 3 seconds) compared to CS (5 minutes, 8 seconds, p=0.015), CD (5 minutes, 26 seconds, p=0.003) and CE (4 minutes, 2 seconds, p=0.025). Histology showed remaining bacteria in significantly fewer (5/25) FACE samples compared to CS (15/25 p=0.004) CD (12/25 p=0.037) but not significantly fewer than CE (11/25 p=0.069). IN CONCLUSION: the excavation result with FACE is equal to CE and superior to CD and CS but requires a significantly shorter excavation time.

Azure Stains↗