PubMed Health⌕ Search

Biomedical subjects

Wolfgang Dott

Publications and source records attributed to Wolfgang Dott.

At least 19 recordsLinked to original sources

Electrical discharge machining: occupational hygienic characterization using emission-based monitoring.

Hazardous potential in industrial environments is normally assessed by means of immission-based sampling and analyses. This approach is not adequate, if effects of specific technical adjustments at machine tools or working processes on hygienic parameters should be assessed. This work has focused on the optimization of a manufacturing process (electrical discharge machining, EDM), with regard to risk reduction assessment. It is based on emission analyses rather than immision analyses. Several technical EDM parameters have been examined for their influence on air-based emissions. Worktools and workpieces used have a strong influence on aliphatic compounds and metals but not on volatile organic compounds (benzene, toluene, ethylene-benzene and xylene (BTEX)) and polycyclic aromatic hydrocarbons (PAHs) in air emissions. Increasing the dielectric (mineral oil) level above processing location decreases BTEX, chromium, nickel and PAH emissions. Aliphatic compounds, in contrast, increase in air emissions. EDM current used has a positive relationship with all substances analyzed in air emissions. Indicative immission concentrations, as can be expected under EDM conditions, are estimated in a predictive scenario. The results of this characterization give rise to an important conclusion in that risk assessment so far has been using incorrect parameters: total aliphatic compounds. Maximum level of chromium is reached long before limit values of aliphatic compounds are exceeded. Because of the fact that metals, like chromium, also have a higher hazardous potential, metal analysis should be introduced in future risk assessment. This experimental approach, that captures total emission of the electrical discharge machine, and is not solely based on immission values, has lead to a better understanding of the production process. This information is used to extract recommendations regarding monitoring aspects and protection measures.

Air Pollutants, Occupational↗

FT-IR spectroscopy as a tool for rapid identification and intra-species characterization of airborne filamentous fungi.

Identification of microfungi is time-consuming due to cultivation and microscopic examination and can be influenced by the interpretation of the macro- and micro-morphological characters observed. Fungal conidia contain mycotoxins that may be present in bioaerosols and thus the capacity for production of mycotoxins (and allergens) needs to be investigated to create a basis for reliable risk assessment in environmental and occupational hygiene. The present investigation aimed to create a simple but sophisticated method for the preparation of samples and the identification of airborne fungi by FT-IR spectroscopy. The method was suited to reproducibly differentiate Aspergillus and Penicillium species on the generic, the species, and the strain level. There are strong indications that strains of one taxon differing in metabolite production can be reliably distinguished by FT-IR spectroscopy (e.g. Aspergillus parasiticus). On the other hand, species from different taxa being similar in secondary metabolite production showed comparably higher similarities. The results obtained here can serve as a basis for the development of a database for species identification and strain characterization of microfungi. The method presented here will improve and facilitate the risk assessment in case of bioaerosol exposure, as strains with different physiological properties (e.g. toxic, non-toxic) could be differentiated. Moreover, it has the potential to significantly improve the identification of microfungi in various fields of applied microbiological research, e.g. high throughput screening in view of specific physiological properties, biodiversity studies, inventories in environmental microbiology, and quality control measures.

Air Microbiology↗

Degradation of estradiol and ethinyl estradiol by activated sludge and by a defined mixed culture.

The aerobic degradation of the natural hormone 17-beta-estradiol (E2) and the synthetic hormone 17-alpha-ethinyl estradiol (EE2) was investigated in batch experiments with activated sludge from a conventional and a membrane sewage treatment plant. E2 was converted to estrone (E1), the well known metabolite, and further completely transformed within 3 days. The turnover rates of E2 did not differ greatly between conventional and membrane activated sludge. EE2 was persistent in both sludges. By several transfers into fresh E2-medium an enrichment culture could be selected that used E2 as growth substrate. Further enrichment and isolation led to a defined mixed culture consisting of two strains, which were identified by a polyphasic approach as Achromobacter xylosoxidans and Ralstonia sp., respectively. The culture used E2 and E1 as growth substrates and transformed estriol (E3) and 16-alpha-hydroxyestrone but not the xenoestrogens bisphenol A, alpha-zearalenol, mestranol or EE2. The turnover rates of E2 were 0.025-0.1 microg h(-1) cfu(-1) and did not depend on the steroid concentration.

Achromobacter denitrificans↗

(M)VOC and composting facilities. Part 2: (M)VOC dispersal in the environment.

BACKGROUND, AIMS AND SCOPE: Composting facilities are known to release odorous volatiles due to biodegradation of municipal waste and plant residues. Although odour perception and its grading is influenced by experience, attitude and adaptation, these emissions have created a lack of acceptance for residents in the vicinity of composting facilities. Enclosure of compost pile halls, ventilation systems and biofilters are often insufficient to minimise the burden of compost-derived compounds in the air. Moreover, economic considerations forced smaller communities to establish less sophisticated facilities with open storage areas and other relevant sources for wind-borne dispersal of bioaerosols. Aim of the present study was to characterise the immission and dispersal of microbial volatiles (MVOC) and, besides, to find coincidences between MVOC and compost odour. METHODS: In the course of this study, the surroundings of two composting facilities, differing in their type of process engineering, were investigated for emission of volatiles in the environment. Both microbially and plant-derived substances were assessed, several of which have low odour thresholds. Air samples were taken in distances ranging from 50 to 800 m in a downwind direction from each facility. RESULTS AND DISCUSSION: Compost-derived and microbial volatile organic compounds (MVOC) were found at distances of up to 800 m from the composting facilities. Terpenes like alpha-pinene, camphene and camphor were the dominant compounds and coincided with typical compost odour, whereas several typical MVOC were not found at greater distances. The terpenes in combination with certain MVOC may play an important role in the perception of compost odour. Exposure concentrations were not of toxicological relevance, but sensory irritation and psychohygienic effects due to an annoyance potential of such compounds should not be dismissed. RECOMMENDATIONS AND OUTLOOK: Although terpenes are generally associated with pleasant odour characteristics, they seemed to contribute to malodours in a mixture with other VOC, in this context of volatile waste from compost facilities. Malodorous emissions from biowaste have to be considered as sources of health complaints and the investigation of mixtures of compost-derived volatiles is still inevitable. Exposure levels have to be discussed taking VOC mixtures into account. Within composting facilities, technical devices have to be improved to minimise dispersal of volatiles to prevent residents from immissions eventually causing health complaints.

Aerosols↗

(M)VOC and composting facilities. Part 1: (M)VOC emissions from municipal biowaste and plant refuse.

GOAL, SCOPE AND BACKGROUND: Malodorous volatiles derived from the decomposition of biowaste within the process of composting might pose a risk to human health. Different techniques of process engineering have been developed to minimise the burden of malodorous compounds in air possibly affecting compost workers and residents in the vicinity. METHODS: In the present study, three different composting facilities were examined for the emission of volatiles to estimate the impact of process engineering on the dispersal of odorous compounds and to discuss its relevance for human health. RESULTS AND DISCUSSION: Concentrations of single compounds belonging to alcohols, ketones, furanes, sulfur-containing compounds and especially terpenes ranged from 10(2) up to nearly 10(6) ng/m3 depending on the sampling sites and the process engineering. The ratio of MVOC and total VOC measured changed throughout the process of biodegradation. A certain combination of volatile compounds coincided with the occurrence of typical compost odour. CONCLUSION: The type of process engineering seemed to have a major impact on the emission of volatiles, as amounts of (microbial) volatiles emitted were characteristic for the different techniques used. Thus, the MVOC emission basically depends on the degree of biodegradation. It is likely that the concentrations workers are exposed to can have an impact on human health. RECOMMENDATIONS AND OUTLOOK: It is obvious that less sophisticated types of process engineering give rise to greater amounts of bioaerosols and volatiles and, therefore, technical devices have to be improved and controlled regularly to minimise adverse health effects on workers.

Bioreactors↗

Childhood infections and risk of wheezing and allergic sensitisation at age 7-8 years.

BACKGROUND: Childhood atopic disease has been associated with exposure to infections early in life. There is however considerable controversy on this issue, since evidence exists for both protective and adverse effects of infections. Aim of this study was to investigate the association between childhood infections and the occurrence of wheeze and allergic sensitisation in 7-8-year-old Dutch and German children. METHODS: A nested case-control study was conducted among German and Dutch children participating in a large longitudinal study on respiratory health. Parents of 510 7-8-year-old children with respiratory complaints and an equal number of children without respiratory complaints were asked to complete a questionnaire. Blood samples were collected for specific serum Immunoglobulin E (IgE) analysis. Data on childhood infections were collected through records of the participating Municipal Health Services. RESULTS: No association was found between recent wheeze and any of the childhood infections investigated. For scarlet fever infection an increased risk of allergic sensitisation (OR: 2.82; 95% CI: 1.40-5.72) and sensitisation against grasses (OR: 3.00; 95% CI: 1.35-6.69) at the age of 7-8 years was found. Varicella infection tended towards increased risk of sensitisation against grasses (OR: 1.88; 95% CI: 0.99-3.58). For allergic sensitisation and sensitisation against grasses the odds ratios increased with increasing number of infections. CONCLUSIONS: The results do not lend support to the suggestion that childhood infection protects against wheezing or allergic sensitisation at age 7-8 years. Scarlet fever or varicella infection presented an increased risk of allergic sensitisation.

Case-Control Studies↗

Environmental factors as delusional contents in patients with schizophrenia.

In a series of 50 consecutive cases in the outpatients' unit of Environmental Medicine (UEM) at the University Hospital of Aachen, Germany, five patients with the diagnosis of schizophrenia presented delusions of being poisoned by environmental factors. This case report illustrates the clinical features of the paranoid type of schizophrenic psychoses. Schizophrenia represents an important differential diagnosis in the interdisciplinary diagnosis and management of health problems attributed to environmental factors.

Delusions↗

Communication problems with environment-related health disorders as illustrated by a multiple chemical sensitivity (MCS) chatroom.

The problem of communication in treating multiple chemical sensitivity (MCS) was analysed and evaluated using the documentation of an MCS chatroom which was set up in April 2001 following the TV programme Gesundheitsmagazin Praxis (Health Magazine: Practice). Approaches were developed for solving communication problems in the chatroom. A total of 490 cases were evaluated, most of which (355) were directly or indirectly affected, 76 came from self-help groups and 10 were from 4 guest experts invited by ZDF (Zweites Deutsches Fernsehen, Second German TV channel). Of these 4 experts, 2 were environmental medicine specialists, 1 psychosomatics expert and 1 psychiatrist. Fourty-nine of the cases included a petition for chatroom participants to join a class-action law. Aside from exchanging basic information on MCS, frequent topics of discussion on the air were the assessment of physicians, clinics, self-help groups and experts. The participants also expressed their views on problems with society, politics, the economy, science and social security. Another common topic was communication in the chatroom itself, which for the most part consisted of sarcasm and insults, which were cause for conflicts in the chatroom. These communication problems led to the conclusion that a chatroom is not the best medium for discussing MCS. If a chatroom is to be used profitably to this end, it is imperative to have a well-defined organisational framework which allows the exchange of current, scientifically accurate information while keeping discussions from escalating and degenerating into arguments.

Attitude to Health↗

Assessing the microbial activity of soil samples, its nutrient limitation and toxic effects of contaminants using a simple respiration test.

Eight soil samples from five wells of a former gas plant site differing in the contamination with BTEX and PAHs as well as the nutrient content were investigated by soil respiration measurements. The basal, glucose as well as NH4+ and PO4(3-) induced cumulative oxygen consumption and carbon dioxide production in 72 and 120 h were determined and additionally the maximal turnover rates and the limitation quotients were calculated. Without additional carbon source only one of five investigated samples was clearly nutrient limited. After glucose supplementation four of seven investigated samples showed nutrient limitation that was in accordance with the available ammonium and phosphorous content. BTEX and PAHs did not exhibit an inhibiting effect on the respiration rate. In contrast, BTEX containing samples exhibited the highest oxygen consumption indicating biodegradation of the contaminants. The results show that oxygen consumption and carbon dioxide production as well as the kinetic of these processes are all informative parameters characterizing the whole microbial respiration potential and their nutrient limitation in soil samples. Therefore this fast respirometric method can be used for the decision if further detailed studies of the bioremediation are useful and if nutrient supplementation is recommended to enhance natural attenuation.

Bacteria↗

Comparative studies on algal toxicity testing using fluorometric microplate and Erlenmeyer flask growth-inhibition assays.

Two fluorometric microplate algae growth-inhibition assays with a liquid volume of 2 mL and 200 microL per well are presented, and comparative studies on the toxicity of chemicals are carried out with Erlenmeyer flask assays. The test procedures are in accordance with the standards ISO 8692 (DIN 38412 L9 and EN 28692), OECD 201 and DIN 38412 L33. By testing four toxicants several times laboratory internal repeatability is proven. Statistical evaluation demonstrates that the results obtained with both the 24-well and the 96-well microplates are nearly identical with the results of the Erlenmeyer flask assay. Therefore, the microplate growth-inhibition assays can be applied for the testing of a wide range of chemicals and environmental samples if some methodical aspects are taken into account. Apart from that, there is a strong need for harmonization if the dependency of the EC values on the toxicological endpoint is considered.

Eukaryota↗

Chryseobacterium defluvii sp. nov., isolated from wastewater.

A Gram-negative, rod-shaped, non-spore-forming, yellow-pigmented bacterium (strain B2T) isolated from wastewater of a sequence batch reactor showing enhanced phosphorus removal was investigated to determine its taxonomic status. Complete 16S rRNA gene sequence analysis indicated that the organism should be placed in the genus Chryseobacterium. The strain contained a polyamine pattern with sym-homospermidine as the major compound, menaquinone MK-6 as the predominant menaquinone and ai-C15:0, i-C15:0 and C16:1 as the major fatty acids. Phosphatidylethanolamine and several unidentified lipids were detected in the polar lipid profile. Phylogenetically, strain B2T was most closely related to Chryseobacterium indoltheticum and Chryseobacterium gleum (96.2 and 95-9% 16S rRNA gene sequence similarity, respectively). The phylogenetic distance from any validly described species within the genus Chryseobacterium, as indicated from 16S rRNA gene sequence similarities, and its phenotypic properties demonstrate that strain B2T represents a novel species, for which the name Chryseobacterium defluvii sp. nov. is proposed; the type strain is B2T (=DSM 14219T =CIP 107207T).

Bacteroides↗

Relevance of airborne fungi and their secondary metabolites for environmental, occupational and indoor hygiene.

Airborne fungal contaminants are increasingly gaining importance in view of health hazards caused by the spores themselves or by microbial metabolites. In addition to the risk for infection, the allergenic and toxigenic properties, as well as the inflammatory effects are discussed in this review as possible health impacts of bioaerosols. A major problem is the lack of threshold values for pathogenic and non-pathogenic fungi, both in the workplace and in outdoor air. While the relevance of mycotoxins has been intensely studied in connection with contamination of food and feed, the possible respiratory uptake of mycotoxins from the air has so far not been sufficiently taken into account. Toxic secondary metabolites are expected to be present in airborne spores, and may thus occur in airborne dust and bioaerosols. Potential health risks cannot be estimated reliably unless exposure to mycotoxins is determined qualitatively and quantitatively. Microbial volatile organic compounds (MVOC) have been suggested to affect human health, causing lethargy, headache, and irritation of the eyes and mucous membranes of the nose and throat. The production of MVOC by fungi has been discussed in connection with domestic indoor microbial pollution, but the relevance of fungal metabolites in working environments remains insufficiently studied.

Air Microbiology↗

Sensitive biomonitoring of monoterpene exposure by gas chromatographic-mass spectrometric measurement of hydroxy terpenes in urine.

A gas chromatographic method with mass selective detection was developed which enables the simultaneous determination of the urinary hydroxy terpenes cis-verbenol, alpha-terpineol, myrtenol, carveol, perillyl alcohol and trans-sobrerol. The sample preparation consisted of enzymatic hydrolysis, solid phase extraction (SPE) with RP-C(18) SPE material and clean up with silica gel cartridges. Large volume injection was used and the mass selective detection was done in the single ion modus. Low detection limits in the range of 1.0-4.5 microg/l for the terpene metabolites in urine and mean recoveries of 100% were achieved.

Environmental Monitoring↗

Sensitive indoor air monitoring of monoterpenes using different adsorbents and thermal desorption gas chromatography with mass-selective detection.

A simple method using active trapping on adsorbents and thermal desorption followed by GC-MS analysis was developed for the indoor air monitoring of monoterpenes. The study was carried out using a dynamically generated atmosphere consisting of 11 monoterpenes: camphene, camphor, delta 3-carene, 1,8-cineol, limonene, linalool, alpha-pinene, beta-pinene, alpha-terpinene, gamma-terpinene, fenchyl alcohol. The influence of the different adsorbents Tenax TA, Tenax GR, Carbosieve SIII, Chromosorb 106 on the yield of six selected monoterpenes at indoor air concentrations was studied. The adsorbent Tenax GR gave relatively the best yields followed by Tenax TA. Detection limits of approximately 1 microgram m3 were determined with Tenax GR for most of the monoterpenes.

Adsorption↗

Improved sample preparation of biomaterials for in vitro genotoxicity testing using reference materials.

New biomaterial related reference materials with known genotoxic properties were produced in order to study the sample preparation and in vitro genotoxicity testing of biomaterials. We incorporated genotoxic substances like benzo[a]pyrene into the biomaterial Tecoflex, a polyurethane frequently used for catheters and other applications. We demonstrated that the model compound benzo[a]pyrene is sufficiently extracted by organic solvents, whereas cell culture medium only extracts very limited quantities. By changing the medium several times during extraction the extracted amount was augmented. Using higher amounts of organic solvent in relation to the reference material's surface led to a higher recovery of extracted benzo[a]pyrene. For the in vitro genotoxicity testing using the Mammalian Cell Gene Mutation Test (HPRT test), Mammalian Chromosome Aberration Test, and bacterial umu- and SOS-tests, concentration of extracts is a prerequisite because of the low sensitivity of the test systems. Often cytotoxicity interferes with the evaluation of genotoxic effects. We demonstrated that some recommendations of the ISO 10993-Part 3 and 12,(1),(2) dealing with the biological evaluation of medical devices, seem to be insufficient, and new rules for the in vitro genotoxicity testing of biomaterials have to be established.

Animals↗

Biodegradability testing of synthetic ester lubricants--effects of additives and usage.

The optimised biodegradability test system "O2/CO2 Headspace Test with GC-TCD" is used for the assessment of synthetic ester lubricants. The effects of both additives and usage on biodegradability are examined and discussed. Ester based cutting fluids and hydraulic fluids with and without additives are used under defined conditions at machine tools and hydraulic and plain bearing test benches. The lubricants are characterised additionally with respect to kinematic viscosity, acidity and elemental composition. Furthermore, a formulated mineral oil is characterised before and after usage at an hydraulic test bench. The results clearly show that the mineral oil is far less biodegradable than the ester oils and that their biodegradability is not affected by usage. Biodegradability of the ester oils is mainly depending on the characteristics of the base fluids and not affected by the additives. Antioxidants are influencing stability respectively biodegradability indirectly, since they prevent oxopolymerisation effects. Other effects of usage on biodegradation are not detected. In this context, the antioxidants ensure ready biodegradability and have a positive effect on the environmental fate of synthetic ester lubricants.

Antioxidants↗

Determination of urease activity in soils by carbon dioxide release for ecotoxicological evaluation of contaminated soils.

A method for the quantification of urease enzyme activity has been set up, which is based on the quantification of carbon dioxide set free into the head space of gastight vessels. The method can be applied for ecotoxicological characterisation of contaminated soil samples besides other methods like soil respiration measurements or nitrification inhibition tests. The sieved soil sample can be incubated under nearly natural conditions with an adjusted water content of about 50% of the water holding capacity. Ammonia or urea do not need to be extracted, since carbon dioxide release is correlated to urease activity. Thus carbon dioxide release is a direct result of urease activity which can be measured in the head space using gastight syringes and gaschromatographic equipment. The urease activity is determined by comparing the carbon dioxide release of incubation vessels with and without urea supply. The applicability of this method has been demonstrated by experiments with N-(n-butyl)phosphoric triamide (NBPT), copper ions and zinc ions as known inhibitors of urease activity.

Carbon Dioxide↗

Assessment of the influence of use on ecotoxicological characteristics of synthetic ester lubricants.

Synthetic ester lubricants need optimisation about their technical and their ecotoxicological characteristics. To determine the ecotoxicological potential the required examinations can be based on the procedure for a risk assessment of chemicals. At present risk classification of lubricant oils is carried out with new oil fluids that are normally prepared before application in aqueous bioassays. In order to improve the ecotoxicological characteristics of some lubricant oils, the quality of the preparation method has been optimised. The resulting preparation protocol leads to aqueous extracts of the oil fluids that can be tested using biological assays. The extent of the changes of the chemical composition caused by the use as well as the ecotoxicological effects caused by additives have to be taken into consideration. For this reason various used lubricants are tested in addition to new oil fluids. In this work various lubricant samples were examined with standardised bacterial growth assays with Vibrio fischeri and Pseudomonas putida, luminescence inhibition assay with V. fischeri, survival assay with Daphnia magna and algal growth inhibition assay with Scenedesmus subspicatus. The chemical characterisation of the aqueous extracts included the determination of pH, conductivity, heavy metals, the content of dissolved organic carbon, inorganic anions and the content of phosphorus. The results emphasize the thesis that environmentally acceptable lubricants can undergo a change of their ecotoxicological potential during the use. Some of the substances that are normally added to base fluids in order to enhance the applicability of the oils may possess a high toxicological potential.

Animals↗