Biomedical subjects

Wouter L J Hinrichs

Publications and source records attributed to Wouter L J Hinrichs.

6 recordsLinked to original sources

PubMed2006

Self-exploding lipid-coated microgels.

Self-exploding microparticles show potential for advanced delivery of certain therapeutics. This study evaluates (1) whether degrading biodegradable dextran hydroxyethyl methacrylate (dex-HEMA) microgels can be coated by a lipid membrane and (2) whether the surrounding membrane can be ruptured by the increasing swelling pressure of the degrading microgel. We found that adsorption of charged liposomes to oppositely charged dex-HEMA microgels provides efficient coating of the microgels, whereby microparticles with a "core-shell" structure were clearly obtained. Especially, we could confirm experimentally that the swelling pressure increase of degrading dex-HEMA microgels can destroy the lipid membrane surrounding the microgels.

Adsorption↗

PubMed2005

Spray freeze drying to produce a stable Delta(9)-tetrahydrocannabinol containing inulin-based solid dispersion powder suitable for inhalation.

The purpose of this study is to investigate whether spray freeze drying produces an inhalable solid dispersion powder in which Delta(9)-tetrahydrocannabinol (THC) is stabilised. Solutions of THC and inulin in a mixture of tertiary butanol (TBA) and water were spray freeze dried. Drug loads varied from 4 to 30 wt.%. Various powder characteristics of the materials were determined. Stability of THC was determined and compared with freeze dried material. The powders, dispersed with an inhaler based on air classifier technology, were subjected to laser diffraction analysis and cascade impactor analysis. Highly porous particles having large specific surface areas (about 90 m(2)/g) were produced. At high drug loads, THC was more effectively stabilised by spray freeze drying than by freeze drying. Higher cooling rates during spray freeze drying result in improved incorporation. Fine particle fractions of up to 50% were generated indicating suitability for inhalation. It was concluded that spray freeze drying from a water-TBA mixture is a suitable process to include lipophilic drugs (THC) in inulin glass matrices. High cooling rates during the freezing process result in effective stabilisation of THC. The powders can be dispersed into aerosols with a particle size appropriate for inhalation.

Administration, Inhalation↗

PubMed2004

Feasibility of nonvolatile buffers in capillary electrophoresis-electrospray ionization-mass spectrometry of proteins.

The combination of capillary electrophoresis (CE) and electrospray ionization-mass spectrometry (ESI-MS) via a triaxial interface was studied as a potential means for the characterization of intact proteins. To evaluate the possibility to use a nonvolatile electrolyte for CE, the effect of sodium phosphate and ammonium borate on the MS signal of the proteins insulin, myoglobin, and bovine serum albumin (BSA) was investigated by employing infusion experiments, and compared to the effect of ammonium formate and formic acid. The study shows that with formic acid (50 mM, pH 2.4) the most intense protein signals were obtained, while the use of sodium phosphate buffer (5 and 10 mM, pH 7.5) almost completely diminished the MS response. Ammonium formate and ammonium borate (up to 100 mM, pH 8.5) also caused protein ion suppression, but especially with the borate buffer significant MS intensity remained. MS analysis of myoglobin revealed the loss of the heme group when an acidic CE electrolyte was used. Using a background electrolyte containing 25 mM ammonium borate (pH 8.5), it is demonstrated that a CE separation of a protein test mixture can be monitored with ESI-MS without degrading the MS performance allowing molecular weight determinations of the separated compounds. In the presence of borate, detection limits were estimated to be 5-10 microM (ca. 100 fmol injected). The usefulness of the CE-MS system employing a borate buffer is indicated by the analysis of a stored sample of BSA revealing several degradation products. A sample of placental alkaline phosphatase (PLAP), a potential therapeutic agent, was also analyzed by CE-MS indicating the presence of a protein impurity. Probably due to insufficient ionization of the PLAP (a complex glycoprotein), no MS signals of the intact protein were observed.

Alkaline Phosphatase↗

PubMed2004

The role of particle engineering in relation to formulation and de-agglomeration principle in the development of a dry powder formulation for inhalation of cetrorelix.

We formulated cetrorelix acetate, as an adhesive mixture for use in dry powder inhalation. To achieve the highest possible deposition efficiency we investigated both the influence of different micronization techniques and different inhalers. The Novolizer with an air classifier as the powder de-agglomeration principle and the ISF inhaler were used for in vitro deposition experiments (cascade impaction). Micronization by milling as the classical approach and micronization by spray drying and spray freeze drying as advanced particle engineering techniques were investigated to determine whether advanced techniques are necessary to obtain high fine particle fractions (FPF) for this specific drug. It was found that the effects obtained with a certain micronization technique depended on the complex interaction of the physical characteristics of the drug substance with the type of formulation chosen, as well as with the de-agglomeration principle used. The combination of particle engineering by spray drying and the use of the air classifier technology resulted in a fine particle fraction of 66%, while spray freeze drying yielded extremely fragile particles resulting in a FPF of only 25%. The behaviour of the milled material showed similar trends as the spray dried material but FPF values were lower. It was concluded that when a drug is to be formulated as a powder for inhalation with high fine particle fractions, it is profitable to use advanced particle engineering techniques, however the applied technique should be tuned with the characteristics of the formulation type and process as well as with device development.

Aerosols↗

PubMed2003

Investigations into the stabilization of drugs by sugar glasses: III. The influence of various high-pH buffers.

PURPOSE: To study the effect of the high-pH buffers ammediol, borax, CHES, TRIS, and Tricine on the glass transition temperature of the freeze concentrated fraction (Tg') of trehalose/buffer and inulin/buffer solutions at pH 6.0 and pH 9.8. Also, the glass transition temperature (Tg) of sugar glasses obtained after freeze drying of these solutions was elucidated. Additionally, the effect occurring during the freezing process on the pH of the various buffers was investigated. Furthermore, the stability of alkaline phosphatase (AP) incorporated in these sugar glasses prepared from solutions at pH 9.8 was evaluated. METHODS: The Tg' and Tg were measured using differential scanning calorimetry (DSC), and the change of pH during freezing was estimated by using an indicator solution added to the respective solutions. The enzymatic activity of AP after freeze drying and storage at 60 degrees C was evaluated by an enzymatic activity assay. RESULTS: It was found that the Tg' and Tg of the samples investigated are strongly influenced by the presence of the buffer. On freezing, only minor changes of the pH were observed. The samples with the lowest Tg and the samples containing buffers that formed complexes with the sugars showed the poorest stability of the AP. CONCLUSIONS: The stabilizing capacities of sugars that are currently recognized as excellent stabilizers for proteins during drying and storage can be completely lost if certain high-pH buffers such as ammediol, borax, and TRIS are used at high concentrations. Loss of stabilizing capacities can be ascribed to strong depression of the Tg' and Tg or to complex formation.

Alkaline Phosphatase↗

PubMed2002

Inulin as filler-binder for tablets prepared by direct compaction.

The tabletting properties of a number of different amorphous inulin types were investigated. The types varied with respect to chain length, particle size and amount of included air in the particles. Powder flow properties and densities of the different types were investigated. Just as expected, it was found that the flow properties improved with increased particle size of the material. Compactibility was investigated by compression of tablets on a compaction simulator, simulating the compression on high-speed tabletting machines. The bonding capacity of all inulins was high. However, the lubricant sensitivity strongly varied among the different types of inulin. Generally, amorphous materials such as starches are highly lubricant sensitive, because they show ductile behaviour upon compaction. On the other hand, crystalline materials such as dicalcium phosphate dihydrate have a low lubricant sensitivity, because they fragment during compaction. A high lubricant sensitivity was indeed found for amorphous inulins with a low amount of entrapped air. In contrast, the lubricant sensitivity of the amorphous inulin was low when particles containing large amounts of air were compressed. Obviously entrapped air induces fragmentation of the powder particles by which the lubricant film, covering the particles, was destroyed. Tablets prepared from inulin did not disintegrate but they dissolved when incubated in water. The disintegration/dissolution time increased with decreasing chain length of the inulin. The addition of a disintegrant reduced the disintegration time. The somewhat slower dissolution of the longer chain inulin can be an advantage for chewable tablets or lozenges. It was concluded that inulin with large amounts of entrapped air is a good filler-binder and an attractive alternative to commonly used filler-binders.

Chemistry, Pharmaceutical↗