Biomedical subjects

Xian-En Zhang

Publications and source records attributed to Xian-En Zhang.

At least 19 recordsLinked to original sources

PubMed2006

Construction of a high sensitive Escherichia coli alkaline phosphatase reporter system for screening affinity peptides.

An enzyme-linker-peptide fusion protein reporter system was constructed for sensitive analysis of affinity of peptide ligands to their receptor. An E. coli alkaline phosphatase (EAP) mutant enzyme with high catalytic activity was selected as the reporter protein. Interaction of affinity peptide and streptavidin was applied as demonstration of the method. Three affinity peptides, strep-tag I (SI), strep-tag II (SII) and streptavidin binding peptide (SBP) were genetically fused to the C-terminal of EAP respectively, with an insertion of a flexible linker peptide in between. The enzyme activity of the EAP fusions showed no obvious change. After expression and purification, the EAP-affinity peptide fusions were applied to the streptavidin modified surface. Binding of the fusions to the surface through interaction of affinity peptides to streptavidin was indicated by color generated from conversion of the substrate by EAP. The relative affinity and specificity of each affinity peptides to the immobilized streptavidin were then evaluated with high sensitivity and broad detection range. This method may be used for effective high-throughput screening of high affinity peptide from the peptide pool.

Affinity Labels↗

PubMed2006

Cell-free bioassay for measurement of dioxins based on fluorescence enhancement of fluorescein isothiocyanate-labeled DNA probe.

This study aims to develop a rapid and sensitive cell-free bioassay of dioxins. It is known that dioxin ligand can bind heterodimeric aryl hydrocarbon receptor (AhR) and triggers the formation of the complex of dioxin-AhR, AhR nuclear translocator (ARNT), and dioxin-responsive element (DRE) region of the DNA. The hypothesis of the proposed method is that if FITC were labeled at the DRE sequence, its fluorescence intensity would be enhanced when the complex forms because the interaction interface of the binding components (AhR, ARNT, and DRE) creates a rather hydrophobic condition that is in favor of FITC emission. Effects of modification site of FITC on the DNA probes on binding efficiency between the complex components and fluorescence emission enhancement were evaluated by surface plasmon resonance and fluorescence analysis, respectively. Results showed that the labeling site at the second base at the 5' end apart from the core region (5'-TNGCGTG-3') of DRE did not obviously interfere with the binding between the DNA probe and dioxin-AhR/ARNT hybrid but presented significant fluorescence emission enhancement. 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) was used as the typical toxin in this study. The method had a linear range of 1-100 pM, with detection limit of 0.1 pM (0.64 fg/assay) and coefficient of variation of 5.6% (n = 10, 50 pM TCDD in transformed cytosol). The whole detection cycle was approximately 4 h. The method was also used to estimate the toxic equivalents (TEQ) of 1,2,3,7,8-pentachlorodibenzo-p-dioxin (PeCDD) and 1,2,3,4,7,8-hexachlorodibenzo-p-dioxin (HxCDD). Measurement of TEQs of the mixture of TCDD, PeCDD, and HxCDD were highly consistent with the predicted data. The average recovery using fly ash extract was approximately 93%.

Biological Assay↗

PubMed2006

The key DNA-binding residues in the C-terminal domain of Mycobacterium tuberculosis DNA gyrase A subunit (GyrA).

As only the type II topoisomerase is capable of introducing negative supercoiling, DNA gyrase is involved in crucial cellular processes. Although the other domains of DNA gyrase are better understood, the mechanism of DNA binding by the C-terminal domain of the DNA gyrase A subunit (GyrA-CTD) is less clear. Here, we investigated the DNA-binding sites in the GyrA-CTD of Mycobacterium tuberculosis gyrase through site-directed mutagenesis. The results show that Y577, R691 and R745 are among the key DNA-binding residues in M.tuberculosis GyrA-CTD, and that the third blade of the GyrA-CTD is the main DNA-binding region in M.tuberculosis DNA gyrase. The substitutions of Y577A, D669A, R691A, R745A and G729W led to the loss of supercoiling and relaxation activities, although they had a little effect on the drug-dependent DNA cleavage and decatenation activities, and had no effect on the ATPase activity. Taken together, these results showed that the GyrA-CTD is essential to DNA gyrase of M.tuberculosis, and promote the idea that the M.tuberculosis GyrA-CTD is a new potential target for drug design. It is the first time that the DNA-binding sites in GyrA-CTD have been identified.

Adenosine Triphosphatases↗

PubMed2006

Reversible immobilization of proteins with streptavidin affinity tags on a surface plasmon resonance biosensor chip.

Dissociation of biotin from streptavidin is very difficult due to their high binding affinity. The re-use of streptavidin-modified surfaces is therefore almost impossible, making devices containing them (e.g. surface plasmon resonance (SPR) sensor chips) expensive. This paper describes a new protocol for reversible and site-directed immobilization of proteins with streptavidin affinity tags on the streptavidin-coated SPR biosensor chip (SA chip). Two streptavidin affinity tags, nano-tag and streptavidin-binding peptide (SBP tag), were applied. They both can specifically interact with streptavidin but have weaker binding force compared to the biotin-streptavidin system, thus allowing association and dissociation under controlled conditions. The SA chip surface could be regenerated repeatedly without loss of activity by injection of 50 mM NaOH solution. The fusion construct of a SBP tag and a single-chain antibody to mature bovine prion protein (scFv-Z186-SBP) interacts with the SA chip, resulting in a single-chain-antibody-modified surface. The chip showed kinetic response to the prion antigen with equilibrium dissociation constant K (D) approximately equal to 4.01 x 10(-7). All results indicated that the capture activity of the SA chip has no irreversible loss after repeated immobilization and regeneration cycles. The method should be of great benefit to various biosensors, biochips and immunoassay applications based on the streptavidin capture surface.

Animals↗

PubMed2006

Phage display mediated immuno-PCR.

Immuno-PCR (IPCR) is a powerful detection technology in immunological study and clinical diagnosis due to its ultrasensitivity. Here we introduce a new strategy termed phage display mediated immuno-PCR (PD-IPCR). Instead of utilization of monoclonal antibody (mAb) and chemically bond DNA that required in the conventional IPCR, a recombinant phage particle is applied as a ready reagent for IPCR experiment. The surface displayed single chain variable fragment (scFv) and phage DNA themselves can directly serve as detection antibody and PCR template, respectively. The aim of the design is to overcome shortcoming of low detection sensitivity of scFv so as to largely facilitate the real application of scFv in immunoassay. The idea has been demonstrated by applying hantaan virus nucleocapsid protein (NP) and prion protein (PrP) as detection targets in three experimental protocols (indirect, sandwich and real-time PD-IPCR assays). The detection sensitivity was increased 1000- to 10,000-folds compared with conventional enzyme-linked immunosorbent assays (ELISAs). This proof-of-concept study may serve as a new model to develop an easy to operate, low cost and ultrasensitive immunoassay method for broad applications.

Capsid Proteins↗

PubMed2006

Construction of single chain variable fragment (ScFv) and BiscFv-alkaline phosphatase fusion protein for detection of Bacillus anthracis.

This paper describes an attempt for convenient and sensitive detection of Bacillus anthracis with single chain variable fragment (scFv)-based protein chip. Phage display technology was employed to generate scFv by using the protective antigen (PA) of B. anthracis for immunization. V(H) and V(L) genes of the scFv were amplified separately by reverse transcriptase-PCR from mRNA of immunized mice and then assembled into scFv gene with a linker DNA sequence. The scFv gene was inserted into a phagemid vector pCANTAB-5E and then transformed into Escherichia coli TG1 to yield recombinant phages after infection with helper phage M13KO7. After six rounds of panning with PA, the phage clones displaying scFv fragments of the antibody were selected by ELISA. One phage clone scFv-6w10 showing the strongest positive signal in ELISA was selected. To enhance the affinity of the scFv-6w10, a recombinant bivalent single-chain Fv antibody (biscFv-6w10) directed against PA was constructed and tested in functional assays. The affinity of the biscFv-6w10 was much higher than that of scFv-6w10 and reached 6.5 x 10(9) M(-1). An expression system was constructed for the production of E. coli alkaline phosphatase (EAP) labeled biscFv-6w10 (biscFv-6w10-EAP) in E. coli cells. The expressed fusion protein retained both antigen-specific binding and enzymatic activity and thus directly served as an enzyme-labeled antibody. Detections of PA and bacterial cells of B. anthracis using biscFv-6w10-EAP and Cy3-labeled biscFv-6w10 were performed on a protein chip. The fusion protein (biscFv-6w10-EAP) chip could detect 10 pg of PA and 500-1000 bacterial cells in approximately 2 h, while the sensitivity of Cy3-labeled protein chip reached 1 pg of PA and 50-100 cells within 2 h.

Alkaline Phosphatase↗

PubMed2006

Directed evolution of the 5'-untranslated region of the phoA gene in Escherichia coli simultaneously yields a stronger promoter and a stronger Shine-Dalgarno sequence.

Directed evolution has been widely applied for gene improvement through random mutagenesis of coding sequences. Through error-prone PCR both in the coding sequence and the regulatory sequence of E. coli alkaline phosphatase, the cellular enzyme activity has been efficiently enhanced. Sequence analysis revealed that the resultant mutant 34-B12, which showed a sevenfold increased enzyme activity at the cellular level, contains three mutations in the regulatory sequence and another three mutations in the coding sequence. Activity assays of the enzyme containing the corresponding amino acid substitutions proved that the amino acid mutations contribute only to a small portion to the increased cellular enzyme activity. So the mutations in the 5'-untranslated region were analyzed separately and combinationally. The results suggested that one mutation yielded a stronger promoter and the other two mutations both elevated the E. coli alkaline phosphatase expression at the translational level; moreover, a stronger Shine-Dalgarno sequence was generated.

5' Untranslated Regions↗

PubMed2005

Plasmid-borne catabolism of methyl parathion and p-nitrophenol in Pseudomonas sp. strain WBC-3.

Pseudomonas sp. strain WBC-3 utilises methyl parathion (MP) or p-nitrophenol (PNP) as the sole source of carbon, nitrogen, and energy. A plasmid designated pZWL0 of approximately 70 kb in this strain was found to be responsible for MP and PNP degradation. This was based on the fact that the plasmid-cured strains showed PNP- MP- phenotype and the PNP+ MP+ phenotype could be conjugally transferred. We have also cloned a 3.4-kb HindIII fragment which exhibited methyl parathion hydrolase activity, which revealed a methyl parathion hydrolase (mph) gene whose DNA sequence is 99.5% identical to the recently identified mpd gene from Plesiomonas sp. M6 [C. Zhongli, L. Shunpeng, F. Guoping, Isolation of methyl parathion-degrading strain M6 and cloning of the methyl parathion hydrolase gene, Appl. Environ. Microbiol. 67 (2001) 4922-4925]. The mph gene was functionally expressed in Escherichia coli and the relative activities of the enzyme against different substrates were determined. The sequence alignment and phylogenetic analysis suggested that MPH and MPD evolved independently from other well-studied organophosphate hydrolases and may be originated from class B beta-lactamase family. Subsequently obtained a 6.5-kb KpnI and BamHI fragment containing the above HindIII fragment revealed that the mph gene was physically located in a typical transposon.

Amino Acid Sequence↗

PubMed2005

Crystal structure of methyl parathion hydrolase from Pseudomonas sp. WBC-3.

Methyl parathion hydrolase (MPH, E.C.3.1.8.1), isolated from the soil-dwelling bacterium Pseudomonas sp. WBC-3, is a Zn(II)-containing enzyme that catalyzes the degradation of the organophosphate pesticide methyl parathion. We have determined the structure of MPH from Pseudomonas sp. WBC-3 to 2.4 angstroms resolution. The enzyme is dimeric and each subunit contains a mixed hybrid binuclear zinc center, in which one of the zinc ions is replaced by cadmium. In both subunits, the more solvent-exposed beta-metal ion is substituted for Cd2+ due to high cadmium concentration in the crystallization condition. Both ions are surrounded by ligands in an octahedral arrangement. The ions are separated by 3.5 angstroms and are coordinated by the amino acid residues His147, His149, Asp151, His152, His234 and His302 and a water molecule. Asp255 and a water molecule serve to bridge the zinc ions together. MPH is homologous with other metallo-beta-lactamases but does not show any similarity to phosphotriesterase that can also catalyze the degradation of methyl parathion with lower rate, despite the lack of sequence homology. Trp179, Phe196 and Phe119 form an aromatic cluster at the entrance of the catalytic center. Replacement of these three amino acids by alanine resulted in a significant increase of K(m) and loss of catalytic activity, indicating that the aromatic cluster has an important role to facilitate affinity of enzyme to the methyl parathion substrates.

Catalytic Domain↗

PubMed2005

Construction and characterization of different MutS fusion proteins as recognition elements of DNA chip for detection of DNA mutations.

Three MutS fusion systems were designed as the mutation recognition and signal elements of DNA chips for detection of DNA mutations. The expression vectors containing the encoding sequences of three recombinant proteins, Trx-His6-GFP-(Ser-Gly)6-MutS (THGLM), Trx-His6-(Ser-Gly)6-Strep tagII-(Ser-Gly)6-MutS (THLSLM) and Trx-His6-(Ser-Gly)6-MutS (THLM), were constructed by gene slicing in vitro. THGLM, THLSLM and THLM were then expressed in Escherichia coli AD494(DE3), respectively. SDS-PAGE analysis revealed that each of the expected proteins was approximately 30% of the total bacterial proteins. The recombinant proteins were purified to the purity over 90% by immobilized metal (Co2+) chelation affinity chromatography. Bioactivity assay indicated that three fusion proteins retained the mismatch-binding activity and the functions of other fusion partners. DNA chips arrayed both mismatched and unpaired DNA oligonucleotides as well as rpoB gene from Mycobacterium tuberculosis were prepared. THGLM, THLSLM and THLM that was labeled with Fluorolinktrade mark Cy3 reactive dye, were then used as both mutation recognition and labeling elements of DNA chips. The resulting DNA chips were used to detect the mismatched and unpaired mutations in the synthesized oligonucleotides and single base mutation in rpoB gene of M. tuberculosis that is resistant to rifamycin.

Carbocyanines↗

PubMed2005

Visualizing the dynamic behavior of poliovirus plus-strand RNA in living host cells.

Dynamic analysis of viral nucleic acids in host cells is important for understanding virus-host interaction. By labeling endogenous RNA with molecular beacon, we have realized the direct visualization of viral nucleic acids in living host cells and have studied the dynamic behavior of poliovirus plus-strand RNA. Poliovirus plus-strand RNA was observed to display different distribution patterns in living Vero cells at different post-infection time points. Real-time imaging suggested that the translocation of poliovirus plus-strand RNA is a characteristic rearrangement process requiring intact microtubule network of host cells. Confocal-FRAP measurements showed that 49.4 +/- 3.2% of the poliovirus plus-strand RNA molecules diffused freely (with a D-value of 9.6 +/- 1.6 x 10(-10) cm2/s) within their distribution region, while the remaining (50.5 +/- 2.9%) were almost immobile and moved very slowly only with change of the RNA distribution region. Under the electron microscope, it was found that virus-induced membrane rearrangement is microtubule-associated in poliovirus-infected Vero cells. These results reveal an entrapment and diffusion mechanism for the movement of poliovirus plus-strand RNA in living mammalian cells, and demonstrate that the mechanism is mainly associated with microtubules and virus-induced membrane structures.

Animals↗

PubMed2004

Identification and characterization of Bacillus anthracis by multiplex PCR on DNA chip.

Bacillus anthracis can be identified by detecting virulence factor genes located on two plasmids, pXO1 and pXO2. Combining multiplex PCR with arrayed anchored primer PCR and biotin-avidin alkaline phosphatase indicator system, we developed a qualitative DNA chip method for characterization of B. anthracis, and simultaneous confirmation of the species identity independent of plasmid contents. The assay amplifies pag gene (in pXO1), cap gene (in pXO2) and Ba813 gene (a B. anthracis specific chromosomal marker), and the results were indicated by an easy-to-read profile based on the color reaction of alkaline phosphatase. About 1 pg of specific DNA fragments on the chip wells could be detected after PCR. With the proposed method, the avirulent (pXO1+/2-, pXO1-/2+ and pXO1-/2-) strains of B. anthracis and distinguished 'anthrax-like' strains from other B. cereus group bacteria were unambiguously identified, while the genera other than Bacillus gave no positive signal.

Alkaline Phosphatase↗

PubMed2004

Oligonucleotide ligation assay-based DNA chip for multiplex detection of single nucleotide polymorphism.

An oligonucleotide ligation assay-based DNA chip has been developed to detect single nucleotide polymorphism. Synthesized nonamers, complementary to the flanking sequences of the mutation sites in target DNA, were immobilized onto glass slides through disulfide bonds on their 5' terminus. Allele-specific pentamers annealed adjacent to the nonamers on the complementary target DNA, containing 5'-phosphate groups and biotin labeled 3'-ends, were mixed with the target DNA in tube. Ligation reactions between nonamers and pentamers were carried out on chips in the presence of T4 DNA ligase. Ligation products were directly visualized on chips through enzyme-linked assay. The effect of G:T mismatch at different positions of pentamers on the ligation were evaluated. The results showed that any mismatch between pentamer and the target DNA could lead to the decrease of ligation, which can be detected easily. The established approach was further used for multiplex detection of mutations in rpoB gene of rifampin-resistant Mycobacterium tuberculosis clinical isolates.

DNA↗

PubMed2004

A visual DNA chip for simultaneous detection of hepatitis B virus, hepatitis C virus and human immunodeficiency virus type-1.

For the simultaneously visual detection of hepatitis B virus (HBV), hepatitis C virus (HCV) and human immunodeficiency virus type-1 (HIV-1), a qualitative DNA chip method, combining multiplex and nested polymerase chain reaction (PCR) with arrayed anchored primer PCR and a biotin-avidin alkaline phosphatase (Av-AP) indicator system, was developed. After pretreatment of infected blood samples and reverse transcription of the RNA virus genome, PCR was performed in a single tube by using the outer primer pairs. Second round nested multiplex PCR was performed on the DNA chip, on which the primers array had already been prepared. During the arrayed anchored multiplex PCR, 5[N-(N-biotinylaminocaproyl)-epsilon-3-aminoallyl]-2-deoxy-uridine-5-triphosphate (biotin-11-dUTP) was incorporated into the extended DNA chains in order to bind avidin alkaline phosphatase via avidin and biotin. To produce purple precipitates on the chips, the enzyme substrate 5-bromo-4-chloro-3-indolyl phosphate (BCIP) was used in conjunction with the enhancer, nitro blue tetrazolium (NBT). Blood samples containing the three viruses were tested using this DNA chip and about 1 pg of specific viral DNA fragments were detected on the chip wells after nested PCR.

Colorimetry↗

PubMed2004

Improvement of homogeneity of analytical biodevices by gene manipulation.

Homogeneity is proposed for evaluation of the quality of analytical biodevices, such as biosensors and biochips. As a demonstration, glucose oxidase (GOx) was modified at its C-terminal with a linker peptide with a cysteine residue at the end. The fusion structure (GOx-linker-cysteine) enables the enzyme to immobilize on gold surfaces with a Cys-S-Au bond or to immobilize on a silanized glass surface via disulfide chemistry. With this fusion structure, the enzyme can be anchored onto the substrate with well-controlled orientation, thus forming a homogeneous biological layer on biodevices. The linker peptide between GOx and the cysteine acts as a spacer to reduce the steric hindrance caused by the bulky body of the enzyme. Biochemistry experiments showed that this genetically modified glucose oxidase (shortened to GOxm) retained most of its catalytic characteristics, with K(m) and K(cat) similar to those of the wild-type GOx. Electrochemistry experiments showed that GOxm-modified electrode gave higher and more stable current responses than the electrode modified with GOx which has no free -SH on its surface. The coefficients of variation (used for evaluation of the interchangeability of the enzyme device from the same batch preparation) were 9.5% for the GOxm gold electrode and 20.0% for the GOx gold electrode and the GOxm oxygen electrode. The relative errors (used for evaluation of the precision of the individual enzyme device) were 2.9% for the GOxm gold electrode, 12.0% for the GOx gold electrode, and 11.2% for the GOxm oxygen electrode. Atomic force microscopy images revealed that GOxm formed a self-assembled monolayer in a hexagonal-like lattice packing arrangement on the gold surface, while GOx formed multilayer assembling or aggregated particles. The homogeneity of the protein chips, the GOxm array that was prepared through -S-S- formation, and the GOx array that was prepared through nonspecific adsorption was evaluated. The coefficients of variation, calculated with the signal level of all dots, were 5.4% for the GOxm array and 81.8% for the GOx array. All experimental results pointed to the fact that the homogeneity of the analytical biodevices could be considerably improved by using the proposed method.

Aspergillus niger↗

PubMed2004

Multiplex detection of mutations in clinical isolates of rifampin-resistant Mycobacterium tuberculosis by short oligonucleotide ligation assay on DNA chips.

A new approach, short-oligonucleotide-ligation assay on DNA chip (SOLAC), is developed to detect mutations in rifampin-resistant Mycobacterium tuberculosis. The method needs only four common probes to detect 15 mutational variants of the rpoB gene within 12 h. Fifty-five rifampin-resistant M. tuberculosis isolates were analyzed, resulting in 87.3% accuracy and 83.6% concordance relative to DNA sequencing.

Antibiotics, Antitubercular↗

PubMed2003

A MutS-based protein chip for detection of DNA mutations.

This paper describes a new protein chip method for detection of single-base mismatches and unpaired bases of DNA, using a genetic fusion molecular system Trx-His6-Linker peptide-Strep-tagII-Linker peptide-MutS (THLSLM). The THLSLM coding sequence was constructed by attaching Strep-tag II and mutS gene to pET32a (+) sequentially with insertion of a linker peptide coding sequence before and behind Strep-tagII gene, respectively. THLSLM was expressed in E. coli AD494 (DE3) and purified using Ni(2+)-chelation affinity resin. THLSLM retained both mismatch recognition activity and streptavidin binding affinity. THLSLM was then immobilized on the chip matrix coated with streptavidin through the Strep-tag II-streptavidin binding reaction. The resulting protein chip was used to detect the mismatched and unpaired mutations in the synthesized oligonucleotides, as well as a single-base mutation in rpoB gene from Mycobacterium tuberculosis, with high specificity. The method could potentially serve as a platform to develop the high-throughput technology for screening and analysis of genetic mutations.

Adenosine Triphosphatases↗

PubMed2002

Genetic modification of glucose oxidase for improving performance of an amperometric glucose biosensor.

Glucose oxidase (GOD) was genetically modified by adding a poly-lysine chain at the C-terminal with a peptide linker inserted between the enzyme and poly-lysine chain. The poly-lysine chain was added in order to anchor more electron transfer mediator, ferrocenecarboxylic acid, to GOD for the purpose of improving sensitivity and stability of glucose biosensors. The modified GOD had similar K(m) and K(cat) to those of the wild type enzyme. After interacted with the electron transfer mediator, the modified enzyme retained 90.01% of its native activity, while the commercial GOD and the wild type GOD (Aspergillus niger) retained only 22.43 and 22.17%, respectively. Screen-printed electrodes coated with the modified GOD, wild type yeast-derived GOD or the commercial GOD were tested in glucose solution of different concentrations. Experimental results showed that the biosensor based on the modified GOD gave the largest signal among the three. In addition, the linear range of the biosensor prepared by the modified GOD could extend to 45 mM, while they were about 20 mM for the biosensors based on the wild type yeast-derived enzyme and the commercial enzyme.

Biosensing Techniques↗