Biomedical subjects

Xiao-Yuan Li

Publications and source records attributed to Xiao-Yuan Li.

9 recordsLinked to original sources

PubMed2006

PVP-coated iron nanocrystals: Anhydrous synthesis, characterization, and electrocatalysis for two species.

We report the synthesis of Fe nanocrystals (approximately 9 nm) in an anhydrous media, formamide, using poly(N-vinyl-2-pyrrolidone) (PVP) as a protecting agent. The morphology, structure, and composition of the PVP-coated Fe nanocrystals are studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and FT-Raman spectroscopy. The surface properties of the PVP-coated Fe nanocrystals are studied by electrochemistry and micro-surface-enhanced Raman scattering (mSERS) using pyridine as a probing molecule. The PVP-coated Fe nanocrystals, when immobilized on an electrode substrate, display very good electrocatalytic activities in the selective reduction of H2O2 in the presence of oxygen and in the oxidation of NO.

Catalysis↗

PubMed2006

Dendritic nanostructures of silver: facile synthesis, structural characterizations, and sensing applications.

Silver nanodendrites are synthesized by a simple surfactant-free method using a suspension of zinc microparticles as a heterogeneous reducing agent. Structural characterizations suggest the preferential growth along 100 and 111 directions by oriented attachment of silver nanocrystals in the diffusion limit, leading to the formation of silver nanodendrites 20-30 nm in stem and branch diameter and 5-50 microm in length. Surface-enhanced Raman scattering studies show that the silver nanodentrites give an intensive and enhanced Raman scattering when pyridine was used as a probing molecule. We have also demonstrated that the silver nanodendrites increase the sensitivity of an electrochemical glucose biosensor by as much as 1-2 orders of magnitude.

Journal Article↗

PubMed2005

Low-temperature synthesis of single crystalline Ag2S nanowires on silver substrates.

We report on the successful synthesis of silver sulfide (Ag(2)S) nanowires by a simple and mild gas-solid reaction approach. For the nanowire synthesis, a preoxidized silver substrate is exposed to an atmosphere of an O(2)/H(2)S mixture at room temperature or slightly above. The resulting Ag(2)S nanowires are phase pure with a monoclinic crystal structure and have diameters of a few tens of nanometers and lengths up to 100 mum. The influence of reaction conditions on the diameter, length, and morphology of the Ag(2)S nanowires has been studied by a number of structural and spectroscopic techniques. The nanowire growth mechanism on the Ag substrate has been discussed, which is likely characterized by continuous deposition at the tip. Additionally, we demonstrate thinning and cutting of individual Ag(2)S nanowires with electron beams and laser beams, which are potentially useful for nanowire manipulation and engineering.

Journal Article↗

PubMed2005

Copper-based nanowire materials: templated syntheses, characterizations, and applications.

Well-aligned Cu(OH)2 nanoribbon and CuO nanorod arrays have been prepared on copper substrates by liquid-solid reactions. The effects of temperature, reaction time, solvent, and pH value on the morphology and composition of the products are systematically studied. Using the Cu(OH)2 nanoribbons array as a reactive and sacrificial template, we have successfully synthesized Cu2O, Cu9S8, and Cu nanoribbon/ nanowire arrays, demonstrating the versatility of the template. The extensive series of copper-based one-dimensional nanomaterials have been fully characterized by various structural, microscopic, and spectroscopic techniques. Moreover, the Cu nanowires are demonstrated to be an excellent surface-enhanced Raman scattering substrate with a sensitivity over an order of magnitude higher than that of a common roughened copper electrode.

Journal Article↗

PubMed2004

Synthesis, crystal structure and DNA cleavage activities of copper(II) complexes with asymmetric tridentate ligands.

Two asymmetric tridentate copper(II) complexes, [Cu(dppt)Cl(2)].0.25H(2)O (1) (dppt=3-(1,10-phenanthrolin-2-yl)-5,6-diphenyl-as-triazine) and [Cu(pta)Cl(2)] (2) (pta=3-(1,10-phenanthrolin-2-yl)-as-triazino[5,6-f]acenaphthylene), have been prepared and characterized by elemental analysis, IR and Fast atomic bombardment mass spectra. Complex 1 has also been structurally characterized. The complexes exist as distorted square pyramid with five co-ordination sites occupied by the tridentate ligand and the two chlorine anions. DNA interaction studies suggest that the ligand planarity of the complex has a significant effect on DNA binding affinity increasing in the order [Cu(dppt)Cl(2)]< [Cu(pta)Cl(2)]. In the presence of ascorbate or glutathione, the two complexes are found to cause significant cleavage of double-strand pBR 322 DNA and [Cu(pta)Cl(2)] exhibited the higher cleaving efficiency.

Animals↗

PubMed2003

Mono-, di-, and tetranuclear ruthenium(II) complexes containing 3-(pyridin-2-yl)-as-triazino[5,6-f]1,10-phenanthroline: synthesis, characterization, and electrochemical and photophysical properties.

Mono-, di-, and tetranuclear Ru(II) polypyridine complexes based on the bridging ligand pdtp, where pdtp is 3-(pyridin-2-yl)-as-triazino[5,6-f]1,10-phenanthroline, have been synthesized and characterizated. This asymmetric bridging ligand is composed of two nonequivalent coordinating sites: one involves the phenanthroline moiety, and the other one involves the pyridyltriazine moiety. Electrochemical data show that the first redox process in these complexes is pdtp based and the metal-metal interaction in di- and tetranuclear complexes is very weak. The two oxidations (+1.41 and +1.56 V vs SCE) observed in dinuclear complex 2 are mainly ascribed to the different coordination environments of two metal centers. Absorption spectra are essentially the sum of the spectra of the component monometallic species. The emission spectra are measured both at room temperature and at 80 K in a 4:1 (v/v) EtOH/MeOH matrix. The complexes all display luminescence properties which are close to that featured by the parent [Ru(phen)(3)](2+) species. It is also noted that center-to-periphery energy transfer occurs in the dendritic tetranuclear complex 3.

Journal Article↗

PubMed2002

Synthesis and structural characterization of di- and tetranuclear zinc complexes with phenolate and carboxylate bridges. Correlations between 13C NMR chemical shifts and carboxylate binding modes.

Two di- and a tetranuclear zinc-carboxylate complexes with different coordination modes, [Zn(2)L(mu(1,3)-OAc)(2)](ClO(4)) (1), [Zn(2)L(mu(1,3)-Pro)(2)](ClO(4)) (2), and [Zn(2)L(mu(1,1)-HCO(2))(mu(1,3)-HCO(2))](2)(ClO(4))(2) (3) (where L = 2,6-bis(N-2-(2'-pyridylethyl)formimidoyl)-4-methylphenol, OAc = acetate, and Pro = propionate) have been synthesized. Their compositions and structures have been identified by elemental analyses, IR, NMR, and X-ray single-crystal diffraction. The cations in both 1 and 2 reveal that the two zinc ions are assembled by a phenolate and a pair of syn-syn mu(1,3)-carboxylate bridges with metal-metal distances of 3.281 and 3.331 A, respectively, and each polyhedron around the zinc ion is a slightly distorted trigonal bipyramid. Compound 3 is a tetranuclear complex consisting of two identical dinuclear subunits that connect to each other by the two formate groups. In each subunit, the pair of metal ions separated at 3.130(1) A is assembled by a phenolate oxygen from L, and a monodentate and a syn-syn bidentate formate bridges. The formate group displays a novel tridentate mode, namely, monodentate and syn-anti bidentate bridges. On the other hand, the solid-state (13)C NMR technique was employed to distinguish the different binding modes of acetate group in five-coordinate zinc complexes. The chemical shifts are as follows: chelating mode (ca. 184 ppm) > bidentate bridge (ca. 180 ppm) > monodentate bridge (ca. 176 ppm).

Journal Article↗

PubMed2002

Syntheses and characterization of aqua-bridged dimetallic complexes, M2(mu-H2O)(mu-OAc)2(Im)4(OAc)2(M=Mg2+, Mn2+, and Ni2+). Structural models for the active sites of dimetallic hydrolases.

Four novel aqua-bridged dinuclear complexes with a formula M2(mu-H2O)(mu-OAc)2(Im)4(OAc)2(Im)4(OAc)2 (where Im=imidazole, M=Mg2+ 1, Mn2+ 2, Ni2+ 3 and Co2+ 4) have been synthesized and characterized. Complexes 1, 2 and 3 have been characterized by X-ray crystallography. Two M2+ ions are bridged by an aqua molecule and two carboxylate anion with M...M=3.635-3.777 A, M-OH(2)=2.109-2.246 A and M-OH(2)-M=114.4-119.0 degrees, respectively. Each complex is further stabilized by two intramolecular hydrogen bonds between the hydrogens of the bridging aqua and the oxygens of the terminal monodentate acetates with a distance of O...O=2.6 A. The terminal monodentate acetates display "reversed" C-O distances, namely the C-O(free) distances are actually longer than the C-O(coordinating) distances. This abnormal geometry of a monodentate carboxylate would be caused by the strong "pulling effect" on the terminal carboxylates by intra- and intermolecular hydrogen bonds. The O-H stretching vibration of the bridging water was identified at ca. 2328 cm(-1) in IR spectra based on the deuterium isotope shift. The solid state 13C and 15N NMR spectra of 1 displayed two sets of peaks for acetate and Im ligands, respectively, consistent with the presence of two types of coordination modes of acetate and the two symmetrically non-equivalent Im as revealed by X-ray structure. 15N chemical shift of NH in Im ligands underwent about 6 ppm downfield shift due to its involvement in an intermolecular hydrogen bond.

Bridged-Ring Compounds↗

PubMedDate not supplied

Differences in optical properties between healthy and pathological human colon tissues using a Ti:sapphire laser: an in vitro study using the Monte Carlo inversion technique.

The purpose of the study is to analyze and compare differences in the optical properties between normal and adenomatous human colon tissues in vitro at 630-, 680-, 720-, 780-, 850-, and 890-nm wavelengths using a Ti:sapphire laser. The optical parameters of tissue samples are determined using a double integrating sphere setup at seven different laser wavelengths. The inverse Monte Carlo simulation is used to determine the optical properties from the measurements. The results of measurement show that the optical properties and their differences vary with a change of laser wavelength for normal and adenomatous colon mucosa/submucosa and normal and adenomatous colon muscle layer/chorion. The maximum absorption coefficients for normal and adenomatous human colon mucosa/submucosa are 680 nm, and the minimum absorption coefficients for both are 890 nm. The maximum difference of the absorption coefficients between both is 56.8% at 780 nm. The maximum scattering coefficients for normal and adenomatous colon mucosa/submucosa are 890 nm, and the minimum scattering coefficients for both are 780 nm. The maximum difference of the scattering coefficients between both is 10.6% at 780 nm. The maximum absorption coefficients for normal and adenomatous colon muscle layer/chorion are 680 nm, and the minimum absorption coefficients for both are 890 nm. The maximum difference of the absorption coefficients between both is 47.9% at 780 nm. The maximum scattering coefficients for normal and adenomatous colon muscle layer/chorion are 890 nm, and the minimum scattering coefficients for both are 680 nm. The maximum difference of the scattering coefficients between both is 9.61% at 850 nm. The differences in absorption coefficients between normal and adenomatous tissues are more significant than those in scattering coefficients.

Adenocarcinoma↗