Biomedical subjects

Xiaoyan Yuan

Publications and source records attributed to Xiaoyan Yuan.

7 recordsLinked to original sources

PubMed2006

Estrogen receptor alpha polymorphisms associated with susceptibility to hepatocellular carcinoma in hepatitis B virus carriers.

BACKGROUND & AIMS: Overexpression of estrogen receptors (ESRs) is implicated in the development of hepatocellular carcinoma (HCC) in both animal models and humans. We examined whether the ESR1 polymorphisms were related to HCC risk among chronic hepatitis B virus carriers. METHODS: Six ESR1 polymorphisms, which are (TA)n repeat in the promoter, T29C at codon 10 in exon 1, PvuII and XbaI site in intron 1, C136474G at codon 325 in exon 4, and A252966G in intron 5, were genotyped in 248 patients with HCC and 239 controls. The associations with the susceptibility to HCC were estimated by logistic regression. Allele-specific transcription difference of ESR1 messenger RNA was performed by real-time quantitative polymerase chain reaction. RESULTS: We observed a statistically significant increased susceptibility to HCC associated with the homozygous alleles with a high number of TA repeats (assigned as H/H genotype; odds ratio [OR], 2.66; 95% confidence interval [CI], 1.44-4.94; P = .0018), T29C C/C genotype (OR, 2.31; 95% CI, 1.25-4.26; P = .0076), and PvuII C/C genotype (OR, 2.19; 95% CI, 1.27-3.78; P = .0048) compared with the homozygous alleles with a low number of TA repeats (assigned as L/L genotype), T29C T/T, and PvuII T/T genotype, respectively. In accordance, the relative messenger RNA levels of the at-risk C allele of T29C were consistently higher than those of the T allele in heterozygous cells. CONCLUSIONS: Our findings suggest that the genetic polymorphism in ESR1 may play a role in mediating susceptibility to HCC in Chinese hepatitis B virus carriers.

Adult↗

PubMed2006

Preparation of PVA/PEI ultra-fine fibers and their composite membrane with PLA by electrospinning.

Ultra-fine fibers of poly(vinyl alcohol)/polyethylenimine (PVA/PEI) were prepared by electrospinning of their blend solutions in water. Effects of PVA/PEI mass ratio and the polymer concentration on the fiber morphology were discussed by analysis of scanning electron micrographs. Results showed that uniform ultra-fine fibers could be obtained from an 8% PVA/PEI solution with 75:25 mass ratio. It was supposed that the introduction of PVA could promote electrospinning of PEI by weakening the intermolecular interaction and increasing solution viscosity. A composite membrane of PVA/PEI with poly(D,L-lactide) (PLA) was produced by co-electrospinning simultaneously from the aqueous 8% PVA/PEI (75:25) solution and a 20% PLA solution in N,N-dimethylformamide in two separated syringes. Fourier transform infrared spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy verified the existence of PVA/PEI and PLA in the fibrous membrane. We attempted to incorporate PEI with PLA as ultra-fine fibers to diminish the acidic inflammation caused by biodegradation of PLA. The fibrous composite membrane of PVA/PEI-PLA could provide better biocompatibility and would be used as drug-delivery carriers or tissue-engineering scaffolds.

Biocompatible Materials↗

PubMed2006

[Research advances in the controlled release of growth factor related to blood vessel tissue engineering].

Growth factors play an important role in cell adhesion and proliferation as well as in tissue regeneration. By incorporating growth factors into polymer scaffolds, controlled release of them can be performed. The release mechanism is varied with the incorporation methods. In this paper, the latest advances in the controlled release of growth factors by blending, hydrogel, microsphere embedding and chemical bonding are reviewed. The potential application of ultrafine fibric embedding in growth factor delivery is described as well.

Biocompatible Materials↗

PubMed2005

A peripheral element assembles the compact core structure essential for group I intron self-splicing.

The presence of non-conserved peripheral elements in all naturally occurring group I introns underline their importance in ensuring the natural intron function. Recently, we reported that some peripheral elements are conserved in group I introns of IE subgroup. Using self-splicing activity as a readout, our initial screening revealed that one such conserved peripheral elements, P2.1, is mainly required to fold the catalytically active structure of the Candida ribozyme, an IE intron. Unexpectedly, the essential function of P2.1 resides in a sequence-conserved short stem of P2.1 but not in a long-range interaction associated with the loop of P2.1 that stabilizes the ribozyme structure. The P2.1 stem is indispensable in folding the compact ribozyme core, most probably by forming a triple helical interaction with two core helices, P3 and P6. Surprisingly, although the ribozyme lacking the P2.1 stem renders a loosely folded core and the loss of self-splicing activity requires two consecutive transesterifications, the mutant ribozyme efficiently catalyzes the first transesterification reaction. These results suggest that the intron self-splicing demands much more ordered structure than does one independent transesterification, highlighting that the universally present peripheral elements achieve their functional importance by enabling the highly ordered structure through diverse tertiary interactions.

Base Pairing↗

PubMed2005

[Electrospinning and morphology of ultrafine poly (D, L-lactide) fibers].

Ultrafine poly (D, L-lactide) (PLA) fibers with diameter less than 200 nm produced by electrospinning were studied to obtain tissue restoration resembling extracellular matrix. Scanning electron microscopy was used to observe the fiber morphology. Results showed that the solvent was the critical factor to determine the formation of the electrospun PLA fibers. Compared with acetone, N,N-dimethylformamide (DMF) was a better solvent for PLA to electrospin. Entrance of an organic salt, triethylbenzylammonium chlorate, led to a great increase of the conductivity of PLA/DMF solutions, so that the average fiber diameter of the electrospun PLA fibers decreased dramatically from 500 nm to 100-200 nm. The addition of surfactant, Span-80, did not improve the fiber morphology but formed beaded fiber web.

Biocompatible Materials↗

PubMed2004

Electrospinning of chitosan solutions in acetic acid with poly(ethylene oxide).

Electrospinning of chitosan solutions with poly(ethylene oxide) (PEO) in an aqueous solution of 2 wt% acetic acid was studied. The properties of the chitosan/PEO solutions, including conductivity, surface tension and viscosity, were measured. Morphology of the electrospun chitosan/PEO was observed by using scanning electron micrographs. Results showed that the ultrafine fibers could be generated after addition of PEO in 2:1 or 1:1 mass ratios of chitosan to PEO from 4-6 wt% chitosan/PEO solutions at 15 kV voltage, 20 cm capillary-collector distance and flow rate 0.1 ml/h. During electrospinning of the chitosan/PEO solutions, ultrafine fibers with diameters from 80 nm to 180 nm were obtained, while microfibers with visually thicker diameters could be formed as well. Results of X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and differential scanning calorimeter exhibited the larger electrospun microfibers were almost entirely made from PEO, while the electrospun ultrafine fibers mainly contained chitosan.

Acetic Acid↗

PubMed2003

[Hydrolysis of poly(L-lactic acid) fibers and formation of low crystalline apatite on their surface by a biomimetic process].

Low crystalline apatite coating was formed on the surface of biodegradable poly(L-lactic acid) (PLLA) fibers by a biomimetic process, i.e., by immersing the fibers in a modified simulated body fluid (SBF) at 37 degrees C and pH 7.3 after hydrolysis of the fibers in water. The apatite was characterized by scanning electron microscopy with energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and Fourier transform infrared spectroscopy. Results showed that the fiber hydrolysis could accelerate the apatite formation but had little effect on the chemical and crystalline structure of the apatite. The structure of the apatite coating formed by the biomimetic method was similar to that of apatite in the natural bone. The bone-like low crystalline apatite coating might exhibit enhanced osteo-conductivity when the PLLA fibers are applied in bone reconstruction biomaterials.

Apatites↗