PubMed Health⌕ Search

Biomedical subjects

Xintao Shuai

Publications and source records attributed to Xintao Shuai.

11 recordsLinked to original sources
PubMed2005

Interactions between self-assembled polyelectrolyte shells and tumor cells.

Layer-by-layer self-assembled polyelectrolyte shells are a new class of micro/nanocapsules with unique physicochemical properties for potential applications in drug/gene delivery. The objective of this study was to investigate the interactions of polyelectrolyte shells ( approximately 1 mum in diameter) with MCF-7 breast cancer cells and identify key parameters that affect such interactions. Tailoring of surface properties of polyelectrolyte shells was achieved by choosing different outermost layer materials, including cationic polymers, anionic polymers, and lipid bilayers. Different surface compositions led to a wide range of electrostatic potentials from -46 to +47 mV in phophate-buffered saline buffer. Confocal microscopy studies showed that the polyelectrolyte shells were internalized into the cell cytoplasm, but not into the nuclei. Correlation of cell uptake with shell surface compositions was complicated by the adsorption of serum proteins on the surface of polyelectrolyte shells, particularly polycation-coated shells. To prevent protein adsorption, poly(ethylene glycol) (PEG) grafted poly(ethyleneimine) (PEI) copolymers (1:1, 1:5, 1:10 graft ratios) were synthesized and introduced on the shell surface. Shells coated with PEI-PEG copolymers effectively reduced protein adsorption whereas PEI-PEG copolymers with lower graft ratios achieved higher cell uptake efficiency after 24 h of incubation with MCF-7 cells.

Biocompatible Materials↗
PubMed2005

Synthesis, characterization and cytotoxicity of poly(ethylene glycol)-graft-trimethyl chitosan block copolymers.

PEGylated trimethyl chitosan (TMC) copolymers were synthesized in an attempt to both increase the solubility of chitosan in water, and improve the biocompatibility of TMC. A series of copolymers with different degrees of substitution were obtained by grafting activated poly(ethylene glycol)s (PEG) of different MW onto TMC via primary amino groups. Structure of the copolymers was characterized using 1H, 13C NMR spectroscopy and GPC. Solubility experiments demonstrated that PEG-g-TMC copolymers were completely water-soluble over the entire pH range of 1-14 regardless of the PEG MW, even when the graft density was as low as 10%. Using the methyl tetrazolium (MTT) assay, the effect of TMC molecular weight, PEGylation ratio, PEG and TMC molecular weight in the copolymers, and complexation with insulin on the cytotoxicity of TMC was examined, and IC50 values were calculated with L929 cell line. All polymers exhibited a time- and dose-dependent cytotoxic response that increased with molecular weight. PEGylation can decrease the cytotoxicity of TMC to a great extent in the case of low molecular weight TMCs. According to the cytotoxicity results, PEG 5 kDa is superior for PEGylation when compared to PEG 550 Da at similar graft ratios. Complexation with insulin further increased cell viability. In addition, Lactate dehydrogenase (LDH) assays were performed to quantify the membrane-damaging effects of the copolymers, which is in line with the conclusion drawn from MTT assay. Moreover, the safety of the copolymers was corroborated by observing the morphological change of the cells with inverted phase contrast microscopy. Based upon these results PEG-g-TMC merits further investigations as a drug delivery vehicle.

Animals↗
PubMed2004

Micellar carriers based on block copolymers of poly(epsilon-caprolactone) and poly(ethylene glycol) for doxorubicin delivery.

Diblock copolymers of poly(epsilon-caprolactone) (PCL) and monomethoxy poly(ethylene glycol) (MPEG) with various compositions were synthesized. The amphiphilic block copolymers self-assembled into nanoscopic micelles and their hydrophobic cores encapsulated doxorubicin (DOX) in aqueous solutions. The micelle diameter increased from 22.9 to 104.9 nm with the increasing PCL block length (2.5-24.7 kDa) in the copolymer composition. Hemolytic studies showed that free DOX caused 11% hemolysis at 200 microg ml(-1), while no hemolysis was detected with DOX-loaded micelles at the same drug concentration. An in vitro study at 37 degrees C demonstrated that DOX-release from micelles at pH 5.0 was much faster than that at pH 7.4. Confocal laser scanning microscopy (CLSM) demonstrated that DOX-loaded micelles accumulated mostly in cytoplasm instead of cell nuclei, in contrast to free DOX. Consistent with the in vitro release and CLSM results, a cytotoxicity study demonstrated that DOX-loaded micelles exhibited time-delayed cytotoxicity in human MCF-7 breast cancer cells.

Antibiotics, Antineoplastic↗
PubMed2004

The depolymerization of chitosan: effects on physicochemical and biological properties.

Chitosan has been extensively used as an absorption enhancer for macromolecules and as gene delivery vehicle. Both properties are molecular weight (MW) dependent. Here, we investigate factors affecting the oxidative depolymerization of chitosan and physicochemical properties of the resulting polymer fractions including their cytotoxicity. The molecular weight of the depolymerized chitosan was influenced by the initial concentration and the source of chitosan. At constant initial concentrations, the molecular weight decreased linearly with the chitosan/NaNO2 ratio and was a function of logarithm of the reaction time. Chitosan with larger molecular weight was more sensitive to depolymerization. No structural change was observed during the depolymerization process by infrared and proton nuclear magnetic resonance spectroscopy. In addition, thermal properties of chitosan fragments were studied by thermal gravimetric analysis and it was found that the decomposition temperature was molecular weight dependent. Furthermore, the solubility of different molecular weight chitosan was assayed as a function of pH and it increased with decreasing molecular weight. The cytotoxicity of chitosan was concentration dependent but almost molecular weight independent according to MTT assay using L929 cell line recommended by USP26. In summary, low molecular weight fractions of chitosan may potentially useful for the design of drug delivery systems due to the improved solubility properties.

Biocompatible Materials↗
PubMedDate not supplied

Core-cross-linked polymeric micelles as paclitaxel carriers.

Cross-linkable di- and triblock copolymers of poly(epsilon-caprolactone) (PCL) and monomethoxyl poly(ethylene glycol) (MPEG) were synthesized. These amphiphilic copolymers self-assembled into nanoscale micelles capable of encapsulating hydrophobic paclitaxel in their hydrophobic cores in aqueous solutions. To further enhance their thermodynamic stability, the micelles were cross-linked by radical polymerization of the double bonds introduced into the PCL blocks. Reaction conditions were found to significantly affect both the cross-linking efficiency and the micelle size. The encapsulation of paclitaxel into the micelles was confirmed by the proton nuclear magnetic resonance (1H NMR) spectroscopy. Encouragingly, paclitaxel-loading efficiency of micelles was enhanced significantly upon micelle core-cross-linking. Both the micelle size and the drug loading efficiency increased markedly with increasing the PCL block lengths, no matter if the micelles were core-cross-linked or not. However, paclitaxel-loading did not obviously affect the micelle size or size distribution. The cross-linked micelles exhibited a significantly enhanced thermodynamic stability against dilution with aqueous solvents. The efficient cellular uptake of paclitaxel loaded in the nanomicelles was demonstrated by confocal laser scanning microscopy (CLSM) imaging. This new biodegradable nanoscale carrier system merits further investigations for parenteral drug delivery.

3T3 Cells↗
PubMedDate not supplied

Supramolecular gene delivery vectors showing enhanced transgene expression and good biocompatibility.

Soluble supramolecular inclusion complexes were formed by threading alpha-cyclodextrin (alpha-CD) molecules over poly(ethylene glycol) (PEG) and poly(epsilon-caprolactone) (PCL) chains of ternary block copolymers of PEG, PCL and polyethylenimine (PEI). Characteristic shifts of PCL absorptions in FTIR, (1)H NMR and UV spectra strongly suggest that alpha-CD is threaded over PEG and PCL blocks. Due to the reduced hydrophobic interaction between PCL blocks, the resulting supramolecular complexes displayed a dramatically increased solubility, in comparison with the ternary block copolymers. Their ability to complex DNA was almost as efficient as that of branched PEI 25 kDa, as shown in the ethidium bromide fluorescence quenching experiments. Resulting DNA polyplexes displayed a size of around 200 nm and a neutral surface charge. Microscopy studies in 3T3 fibroblasts revealed an efficient cellular uptake. Transfection efficiencies of inclusion complexes were in the same order of magnitude as PEI. In contrast to PEI a 100x lower toxicity was observed by MTT-assay, allowing the administration of nitrogen-to-phosphate ratios of up to 20. These new gene delivery systems merit further characterization under in vivo conditions.

Animals↗
PubMedDate not supplied

Formation of and coalescence from the inclusion complex of a biodegradable block copolymer and alpha-cyclodextrin. 2: A novel way to regulate the biodegradation behavior of biodegradable block copolymers.

A biodegradable block copolymer (PCL-b-PLLA, M(n) = 1.72 x 10(4), M(w)/M(n) = 1.37) of poly(epsilon-caprolactone) (PCL) and poly(L-lactide) (PLLA) with very low crystallinity was obtained by forming the inclusion complex between alpha-cyclodextrin molecules and PCL-b-PLLA followed by coalescence of the guest polymer chains. Films of the as-synthesized and coalesced copolymer samples, PCL and PLLA homopolymers of approximately the same chain lengths as the corresponding blocks of PCL-b-PLLA, and a physical blend of PCL/PLLA homopolymers with the same molar composition as PCL-b-PLLA were prepared by melt-compression molding between Teflon plates. Subsequently, the in vitro biodegradation behavior of these films was studied in phosphate buffer solution containing lipase from Rhizopus arrhizus, by means of ultraviolet spectra, attenuated total reflectance FTIR spectra, differential scanning calorimetry, wide-angle X-ray diffraction measurements, and weight loss analysis. PCL segments were found to degrade much faster than PLLA segments, both in the pure state and in copolymer or blend samples. Consistent with our expectation, suppression of the phase separation, as well as a decrease of crystallinity, in the coalesced copolymer sample led to a much faster enzymatic degradation than that of either as-synthesized copolymer or the PCL/PLLA physical blend sample, especially during the early stages of biodegradation. Thus the biodegradation behavior of biodegradable block copolymers, which is of decisive importance in drug delivery and controlled release systems, may be regulated by the novel and convenient means recently reported by us.(1)

Biocompatible Materials↗
PubMedDate not supplied

Compatibilization effect of poly(epsilon-caprolactone)-b-poly(ethylene glycol) block copolymers and phase morphology analysis in immiscible poly(lactide)/poly(epsilon-caprolactone) blends.

The miscibility and phase behavior of two stereoisomer forms of poly(lactide) (PLA: poly (L-lactide) (PLLA) and poly(DL-lactide) (PDLLA)) blends with poly(epsilon-caprolactone)-b-poly(ethylene glycol) (PCL-b-PEG) and PCL-b-monomethoxy-PEG (PCL-b-MPEG) block copolymers have been investigated by differential scanning calorimetry (DSC). The DSC thermal behavior of both the blend systems revealed that PLA is miscible with the PEG segment phase of PCL-b-(M)PEG but is still immiscible with its PCL segment phase although PCL was block-copolymerized with PEG. On the basis of these results, PCL-b-PEG was added as a compatibilizer to PLA/PCL binary blends. The improvement in mechanical properties of PLA/PCL blends was achieved as anticipated upon the addition of PCL-b-PEG. In addition, atomic force microscopy (AFM) measurements have been performed in order to study the compositional synergism to be observed in mechanical tests. AFM observations of the morphological dependency on blend composition indicate that PLA/PCL blends are immiscible but compatible to some extent and that synergism of compatibilizing may be maximized in the compositional blend ratio before apparent phase separation and coarsening.

Calorimetry, Differential Scanning↗
PubMedDate not supplied

Melting and crystallization behaviors of biodegradable polymers enzymatically coalesced from their cyclodextrin inclusion complexes.

Inclusion complexed (IC) and coalesced biodegradable poly(epsilon-caprolactone) (PCL), poly(L-lactic acid) (PLLA), and their diblock copolymer (PCL-b-PLLA) were achieved by forming ICs between host alpha-cyclodextrin(alpha-CD) and guest PCL, PLLA, and PCL-b-PLLA, followed by removing the alpha-CD host with an amylase enzyme. FTIR spectra of the coalesced polymers reveal that the host alpha-CD can be completely removed, without polymer degradation, by treatment with an amylase enzyme. The melting and crystallization behavior of these CD-IC treated polymers, which are crystallizable, biodegradable, and bioabsorbable, are investigated by differential scanning calorimetry (DSC) and polarized optical microscopy. Results show that coalescence increased the crystallinities of the homopolymers but decreased that of the diblock copolymer. The Avrami exponent (n), derived from both isothermal and nonisothermal crystallization models for homo-PCL and -PLLA and the PCL and PLLA blocks in the diblock copolymer samples coalesced from their ICs, is close to 4, indicating homogeneous crystallization, whereas crystallization of the blocks in the as-synthesized diblock copolymer yields an Avrami exponent around 3, indicating heterogeneous crystallization. All of these results demonstrate that the PCL and PLLA homopolymers and blocks in the IC-coalesced samples are more readily and homogeneously crystallized than those in the as-synthesized samples or their physical blend, even though the level of crystallinity in the IC-coalesced diblock copolymer is significantly lower. Moreover, unlike the as-synthesized diblock copolymer, the crystallization of PCL and PLLA blocks in the IC-coalesced diblock copolymer are not influenced by their covalent connection.

Biodegradation, Environmental↗