Biomedical subjects

Xuanhong Cheng

Publications and source records attributed to Xuanhong Cheng.

5 recordsLinked to original sources

PubMed2007

Comparison of native extracellular matrix with adsorbed protein films using secondary ion mass spectrometry.

In the past decade, the temperature-responsive behavior of poly(N-isopropyl acrylamide) (pNIPAM) has come to be recognized as a convenient method for the nondestructive harvest of confluent cell layers. Recently, we have utilized this nondestructive cell harvest method as a means to ascertain the nature of the extracellular matrix (ECM) secreted from cells. In this work, we compare the ECM obtained after cell liftoff to individual ECM proteins adsorbed directly onto RF-plasma-deposited pNIPAM (ppNIPAM). Using X-ray photoelectron spectroscopy, we find that the composition of ppNIPAM post-cell liftoff surfaces is consistent with those of the ppNIPAM post-protein adsorption surface, both of which differ from control surfaces. Using principal component analysis of positive-ion time-of-flight secondary ion mass spectrometry (ToF-SIMS) data, we show that the major ECM proteins examined can effectively be identified from their amino acid compositions. By comparing the positive-ion ToF-SIMS data from each of the ppNIPAM post-protein adsorption surfaces to that of ppNIPAM post-cell liftoff, we find that ppNIPAM post-cell liftoff surfaces are distinctly separate from fibronectin (FN). This result is consistent with our previous observation using immunoassay that FN is clearly associated with the cell sheet after low-temperature liftoff from ppNIPAM.

Acrylic Resins↗

PubMed2005

Cell sheet detachment affects the extracellular matrix: a surface science study comparing thermal liftoff, enzymatic, and mechanical methods.

This work compares the removal of bovine aortic endothelial cell (BAEC) monolayers via 1) low-temperature liftoff from a "smart polymer," plasma polymerized poly(N-isopropyl acrylamide) (ppNIPAM), 2) enzymatic digestion, and 3) mechanical dissociation from ppNIPAM surfaces. We examine the surfaces after cell removal by using X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), immunostaining, and cell adhesion assay. Immunoassay results indicate that low-temperature liftoff nondestructively harvests the cell sheet and most of the underlying extracellular matrix (ECM), whereas enzymatic digestion and mechanical dissociation are damaging to both the cells and ECM. XPS results indicate that amide and alcohol groups attributed to proteins in the ECM are present on postliftoff surfaces. Principal component analysis (PCA) of ToF-SIMS data indicates that molecular ion fragments of amino acids are present on postliftoff surfaces. Finally, a cell adhesion assay seeding new cells on surfaces from which an initial layer of cells was removed via each of the three methods indicates that liftoff and mechanical dissociation leave behind surfaces that better promote cell adhesion. We conclude that the removal of BAEC cells via low-temperature liftoff from ppNIPAM-treated surfaces is less damaging to the ECM proteins remaining at the surface than the other methods.

Acrylamides↗

PubMed2005

Surface chemical and mechanical properties of plasma-polymerized N-isopropylacrylamide.

Surface-immobilized poly(N-isopropyl acrylamide) (pNIPAM) is currently used for a wide variety of biosensor and biomaterial applications. A thorough characterization of the surface properties of pNIPAM thin films will benefit those applications. In this work, we present analysis of a plasma-polymerized NIPAM (ppNIPAM) coating by multiple surface analytical techniques, including time-of-flight secondary-ion mass spectrometry (ToF-SIMS), contact angle measurement, atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. ToF-SIMS data show that the plasma-deposited NIPAM polymer on the substrate is cross-linked with a good retention of the monomer integrity. Contact angle results confirm the thermoresponsive nature of the film as observed by a change of surface wettability as a function of temperature. Topographic and force-distance curve measurements by AFM further demonstrate that the grafted film shrinks or swells depending on the temperature of the aqueous environment. A clear transition of the elastic modulus is observed at 31-32 degrees C. The change of the surface wettability and mechanical properties vs temperature are attributed to different conformations taken by the polymer, which is reflected on the outmost surface as distinct side chain groups orienting outward at different temperatures as measured by SFG. The results suggest that a ppNIPAM thin film on a substrate experiences similar mechanical and chemical changes to pNIPAM bulk polymers in solution. The SFG result provides evidence supporting the current theory of the lower critical solution temperature (LCST) behavior of pNIPAM.

Acrylic Resins↗

PubMed2005

Surface characterization of the extracellular matrix remaining after cell detachment from a thermoresponsive polymer.

The temperature-responsive behavior of poly(N-isopropyl acrylamide) (pNIPAM) directly affects the attachment and detachment of cells cultured on these surfaces. At culture temperatures, cells behave similarly to those on tissue culture polystyrene (TCPS), while at room temperature, cells cultured on pNIPAM spontaneously detach as a confluent sheet. In comparison, cells grown on TCPS remain attached indefinitely after the temperature drop, requiring enzymatic or mechanical removal. In this work, we present an examination of the response of bovine aortic endothelial cells (BAECs) and extracellular matrix (ECM) proteins to plasma polymerized NIPAM (ppNIPAM) surfaces using X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and immunostaining. Immunoassay results reveal that, although fibronectin, laminin, and collagen closely associate with the cell sheet, some collagen may be associated with the surface, as well. Our XPS results indicate that ppNIPAM surfaces after cell liftoff differ from their blank counterparts, the primary distinction being the presence of amide and alcohol species on ppNIPAM surfaces used for cell culture, possibly owing to the presence of a proteinaceous film. Finally, a comparison between ppNIPAM-treated surfaces used for cell culture versus control surfaces by principal component analysis of the ToF-SIMS data confirms that the surfaces differ; the presence of molecular ion fragments from amino acids (e.g., alanine, glycine, and proline) is the chief reason for this difference. Therefore, from our surface characterization of ppNIPAM-coated TCPS after cell liftoff, we conclude that although low-temperature liftoff of the BAEC monolayer is accompanied by the majority of the components of the ECM, some of the ECM proteins still remain at the surface.

Acrylic Resins↗

PubMed2004

Novel cell patterning using microheater-controlled thermoresponsive plasma films.

A novel approach is reported for cell patterning based on addressable microheaters and a poly(N-isopropyl acrylamide) (pNIPAM) themoresponsive coating. This thermoresponsive coating is created by a radio frequency NIPAM plasma and is denoted as plasma polymerized NIPAM (ppNIPAM). Films of ppNIPAM with a good retention of monomer side-chain functionality are produced using low-power continuous plasma deposition. Cell adhesion and cell detachment tests indicate that the surface switches between adhesive and nonadhesive behaviors as a function of temperature. The use of a photolithographically fabricated microheater array allows the ppNIPAM transition to occur spatially under the control of individual heaters. This localized change in the surface adhesive behavior is used to direct site-specific cell attachment. Patterned adhesion of two types of cells has been visualized on the array through fluorescent markers. Applications for diagnostic devices, cell-based sensors, tissue engineering, and cell transfection are envisioned.

Acrylic Resins↗