Biomedical subjects

Y Bourne

Publications and source records attributed to Y Bourne.

42 records · Page 3Linked to original sources

PubMed1990

X-ray structure of a (alpha-Man(1-3)beta-Man(1-4)GlcNAc)-lectin complex at 2.1-A resolution. The role of water in sugar-lectin interaction.

We describe herein the high resolution refined x-ray structure of a trisaccharide, which is a part of the N-acetyllactosamine type glycan found in the majority of the N-glycosyl-proteins, complexed to the isolectin I. According to the potentials used by Imberty et al. (Imburty, A., Gerber, S., Tran, V., and Pérez, S. (1990) Glycoconjugate J. 7, 27-54) the trisaccharide is in a low-energy state. Only one mannose moiety establishes direct hydrogen bonds with the lectin, as it is the case for monosaccharide-lectin complexes. The comparison of our trisaccharide with the one determined in solution by Warin et al. (Warin, V., Baert, F., Fouret, R., Strecker, G., Fournet, B., and Montreuil, J. (1979) Carbohydr. Res. 76, 11-22) shows that both adopt roughly the same conformation. The differences in these two sugar structures allow us to assign the role of water molecules present in the vicinity of our trisaccharide for the stabilization of this sugar-lectin complex.

Carbohydrate Sequence↗

PubMed1990

X-ray crystal structure determination and refinement at 1.9 A resolution of isolectin I from the seeds of Lathyrus ochrus.

Orthorhombic crystals of isolectin I (LOLI) from the seeds of Lathyrus ochrus were first obtained during the STS 29 space shuttle mission. Subsequently, isostructural crystals were also obtained in the laboratory. They belong to the space group P2(1)2(1)2, with cell dimensions a = 135.84 A, b = 63.12 A and c = 54.54 A with one functional entity, a dimer, in the asymmetric unit (Vm = 2.2 A3/Da). The three-dimensional structure of LOLI, which was solved by the molecular replacement method using a 3 A resolution model of pea lectin, has subsequently been refined by using crystallographic data between 8.0 A and 1.9 A resolution, coupled to molecular dynamics and energy minimization techniques. The conventional R-factor is 0.185 for Fo greater than 1 sigma(Fo). The final model includes 220 well-defined water molecules and has root-mean-square deviations from ideal bond distances and angles of 0.004 A and 3 degrees, respectively. Only slight conformation differences have been found between the two alpha beta monomers. The molecular structure of LOLI, the first to be determined from the genus Lathyrus, is very similar to those of concanavalin A, pea lectin and favin. Differences are confined to the loop regions and beta-chain termini. Comparison of equivalent C alpha atom positions between our final model and the pea lectin structure shows slight differences in the association of the two monomers, which are probably due to the different environments in the crystals. The root-mean-square deviation between C alpha atoms of LOLI and pea lectin is 0.40 A. The metal binding sites are very similar in pea lectin, concanavalin A and LOLI. The sugar-binding sites of LOLI are occupied by four well-ordered water molecules each. The cleavage site for one of the monomers is specially well defined in the final electron density map: the amino group of Glul (alpha) seems to form a salt bridge with the carboxylate group of the terminal Asn181 (beta). A detailed analysis of the difference in crystal packing contacts between pea lectin and LOLI shows that, as might be expected, several of the intermolecular interactions are mediated by residues that correspond to substitutions in the LOLI amino acid sequence.

Amino Acid Sequence↗

PubMed1990

Co-crystallization and preliminary X-ray diffraction studies of Lathyrus ochrus isolectin I with di- and trisaccharides, and a biantennary octosaccharide.

Isolectin I (LOL I) isolated from the seeds of Lathyrus ochrus has been crystallized in the presence of four different oligosaccharides from an N-acetyllactosaminic type biantennary glycan of human lactotransferrin. The crystals containing putative complexes of LOL I with two different disaccharides are isostructural with the saccharide-free LOL I form (space group P2(1)2(1)2, a = 135.8 A, b = 63.1 A and c = 54.5 A). The LOL I-trisaccharide complex crystallizes in the same space group with small but significant changes in the cell dimensions: a = 136.9 A,b = 63.4 A and c = 54.6 A. Both crystal forms diffract strongly up to at least 1.8 A resolution. One functional entity, an alpha 2 beta 2 tetramer in the asymmetric unit (Mr = 52,000) give a Vm of 2.2 A3/dalton, or a solvent content of approximately 44%. The putative LOL I-octosaccharide complex crystallizes in the monoclinic space group C2 with cell dimensions a = 78.3 A, b = 75.4 A, c = 103.9 A and beta = 92 degrees. The crystals diffract to a resolution of 2.3 A and are suitable for crystallographic investigations. An alpha 2 beta 2 tetramer complexed to two octosaccharides (Mr = 55,000) in the asymmetric unit leads to a Vm value of 2.8 A3/dalton (57% solvent).

Carbohydrate Sequence↗

PubMed1990

Three-dimensional structures of complexes of Lathyrus ochrus isolectin I with glucose and mannose: fine specificity of the monosaccharide-binding site.

The structure of the methyl-alpha-D-mannopyranoside-LOL I complex has been solved by the molecular replacement method using the refined saccharide-free LOL I coordinates as starting model. The methyl-alpha-D-mannopyranoside-LOL I complex was refined by simulated annealing using the program X-PLOR. The final R-factor value is 0.182 [Fo greater than 1 sigma(Fo)]. The isostructural methyl-alpha-D-glucopyranoside-LOL I complex was refined by X-Ray coupled energy minimization using the methyl-alpha-D-mannopyranoside-LOL I structure as a starting model to an R factor of 0.179 (all data). In both crystal forms, each dimer binds two molecules of sugar in pockets found near the calcium ions. The two saccharide moieties, which are in the C1 chair conformation, establish the same hydrogen bond pattern with the lectin. However, the van der Waals contacts are different between the O2, C2, C6, and O6 atoms of the two molecules and the backbone atoms of residues 208-211. Mannose, due to its axial C2 conformation, encloses the backbone atoms of the protein in a clamplike way. Van der Waals energy calculations suggest that this better complementarity of the mannoside molecule with the lectin could explain its higher affinity for isolectin I.

Binding Sites↗

PubMed1989

Crystallization and preliminary X-ray study of horse pancreatic lipase.

Horse (Equus caballus) pancreatic lipase (EC 3.1.1.3) has been crystallized using the hanging drop method of vapour diffusion at 20 degrees C. The best crystals were grown from an 8 mg/ml solution in 10 to 20% (w/v) polyethylene glycol 8000, 10 mM-MgCl2, 0.1 M-NaCl, 0.1 M-Mes buffer (pH 5.6). They reach dimensions of 0.8 mm x 0.4 mm x 0.6 mm. X-ray examination of the lipase crystals shows that they are orthorombic with a space group P2(1)2(1)2(1). Their cell dimensions are a = 79.8 A, b = 97.2 A c = 145.3 A. Two molecules per asymmetric unit give a Vm value of 2.82 A3/dalton (56% water content). Lipase crystals strongly diffract to at least 1.8 A resolution. Some molecular properties of horse lipase compared to those of the better-known porcine enzyme are also presented.

Animals↗

PubMed1988

Crystallization and preliminary X-ray studies of two isolectins from the seeds of Lathyrus ochrus.

Two isolectins from the seeds of Lathyrus ochrus, LOL I and LOL II, which specifically bind N-acetyllactosamine, have been crystallized using the hanging-drop method and the interface diffusion method, respectively. In the case of LOL I, 2-methylpentane-2,4-diol, polyethylene-glycol 400 or ammonium sulphate have been used as precipitating agents. The best crystals of LOL I were grown at room temperature from a solution of 40% (v/v) methylpentane diol, 50 mM-Hepes at pH 7.5. LOL II crystals have been grown at room temperature from a solution of 32% (v/v) methylpentane diol, 50 mM-2-(N-morpholino)-ethanesulphonic acid at pH 5.5. X-ray examination of the LOL I and LOL II crystals shows that both are monoclinic, space group P2(1). Their cell dimensions are: LOL I, a = 56.4 A, b = 138.8 A, c = 62.9 A, beta = 91 degrees; and LOL II, a = 54.8 A, b = 71.4 A, c = 105.5 A, beta = 105 degrees. Density measurements of the crystals of LOL I indicate that there are two molecules per asymetric unit (Vm = 2.07 A3/dalton). LOL I crystals diffract strongly up to at least 1.8 resolution. Putative crystals of complexes of LOL I with various glycosides were obtained through co-crystallization under the conditions used for the native protein.

Crystallization↗