PubMed Health⌕ Search

Biomedical subjects

Y C Fung

Publications and source records attributed to Y C Fung.

At least 91 records · Page 5Linked to original sources
PubMed1985

Transmural myocardial deformation in the canine left ventricle. Normal in vivo three-dimensional finite strains.

To examine transmural finite deformation in the wall of the canine left ventricle, closely spaced columns of lead beads were implanted at a single site on the left ventricular free wall. The three-dimensional coordinates of these myocardial markers were obtained with high-speed biplane cineradiography. Any four noncoplanar markers forming small tetrahedral volumes (less than or equal to 0.1 cc) were used to calculate finite normal and shear strains with respect to a cardiac coordinate system at end diastole. Due to the symmetry of the finite strain tensor, the algebraic eigenvalue problem could be solved to compute principal strains and the directions of the principal axes of deformation with respect to the reference coordinates. An examination of the principal strains in a number of tetrahedra in five animals indicates that deformation increases with depth beneath the epicardium. For example, the transmural variation of principal shortening strain averages -0.014 +/- 0.009 per 10% increment in thickness from epicardium to endocardium. Furthermore, shortening and thickening strains at midwall and deeper are too large (0.10 to 0.40) to be described accurately by infinitesimal theory. These strains are often accompanied by substantial in-plane and transverse shears which are not predicted by typical membrane or shell theories, indicating that these theories must be applied with caution when computing indices of regional ventricular performance. The directions of the principal axes of shortening vary substantially less than the fiber direction varies across the wall (20 degrees - 40 degrees compared with 100 degrees - 140 degrees for fiber direction), supporting the concept that there are substantial interactions between neighboring fibers in the left ventricular wall.

Animals↗
PubMed1984

Compressibility and constitutive equation of arterial wall in radial compression experiments.

A large number of papers treat the tensile properties of arterial wall, but few treat compressive properties. Almost everybody assumes incompressibility; few have measured the vessel wall fluid extrusion due to compressive loading. In this work, uniaxial compressive force is applied directly on rabbit thoracic artery in the radial direction to study its constitutive equation under compressive stresses. The resulting stress-strain curves show that the wall material becomes increasingly stiffer at larger compressive strain, quite similar to the behavior in tension. A pseudo-strain energy function of the exponential type which has been applied successfully on the tension side is used to identify the material constants on the compression side. The material constants are identified in two ways: with and without the assumption of incompressibility. To determine the compressibility of the wall, the fluid extrusion accompanying this type of loading is measured, and is found to be in the range of 0.50-1.26% of the undeformed tissue volume per 10 kPa compressive stress loading in the radial direction. At compressive stresses higher than 30 kPa, the percentage of fluid extrusion per unit compressive stress decreases. At this degree of fluid extrusion the tissue is only slightly compressible (or nearly incompressible). However, the use of incompressibility assumption in the stress-strain relationship results in a set of material constants which is very different from that derived without that assumption.

Animals↗
PubMed1984

Morphometry of cat's pulmonary arterial tree.

Morphometic data of the pulmonary artery in the cat's right lung are presented. Silicone elastomer casts of cat's right lung were made, and measured, counted and analyzed. The Strahler system is used to describe the branching pattern of the arterial vascular tree. These data are needed for any quantitative approach to the study of the pulmonary circulation. For all the pulmonary blood vessels of the cat lying between the main pulmonary artery and the capillary beds, there are a total of 10 orders of vessels in the right upper lobe, 9 orders of vessels in the right middle lobe and 11 orders of vessels in the right lower lobe. The ratio of the number of branches in successive orders of vessels or the branching ratio, is 3.58. The corresponding average diameter ratio is 1.72, whereas the average length ratio is 1.81.

Animals↗
PubMed1983

Three-dimensional stress distribution in arteries.

A three-dimensional stress-strain relationship derived from a strain energy function of the exponential form is proposed for the arterial wall. The material constants are identified from experimental data on rabbit arteries subjected to inflation and longitudinal stretch in the physiological range. The objectives are: 1) to show that such a procedure is feasible and practical, and 2) to call attention to the very large variations in stresses and strains across the vessel wall under the assumptions that the tissue is incompressible and stress-free when all external load is removed.

Animals↗
PubMed1983

Patency and compliance of pulmonary veins when airway pressure exceeds blood pressure.

Our measurements on cat's lung show that pulmonary veins and venules are not collapsible, but remain open when the alveolar gas pressure (PA) exceeds the local blood pressure (Pv). Their compliance constants show no discontinuity as Pv falls below PA. The capillaries, however, do collapse when PA greater than Pv. The explanation of the patency of the veins when PA greater than Pv is the pulling on the blood vessels by tension in the interalveolar septa. Photomicrographs show that each venule (or vein) is pulled radially by three or more interalveolar septa. Capillary sheets, however, are exposed to gas on the lateral sides and can readily collapse when PA greater than Pv. These facts provide the key to the analysis of pulmonary blood flow in zone 2. The "sluicing" gate, i.e., the site of flow limitation, must be located at the junctions of capillary sheets and the first generation of venules. Further, data on the branching pattern and compliance of small pulmonary veins, which are needed in quantitative analysis of pulmonary circulation, are presented.

Animals↗
PubMed1983

Morphometry of cat pulmonary venous tree.

Morphometric data of the pulmonary veins in the cat right lung are presented. Silicone elastomer casts of the right lungs of five cats were made, measured, counted, and analyzed. The Strahler system is used to describe the branching pattern of the vascular tree. These data are needed for the physicomathematical approach to pulmonary circulation. For all the pulmonary blood vessels lying between the left atrium and the capillary beds, there are a total of 10 orders of vessels in the right upper lobe, 9 orders of vessels in the right middle lobe, and 11 orders of vessels in the right lower lobe. The ratios of the diameters, lengths, and the number of branches in successive orders of vessels are called the diameter, length, and branching ratios, respectively. For the cat pulmonary venous tree, the average branching ratio is 3.521, the average diameter ratio is 1.727, and the average length ratio is 2.402 for vessels of orders 1-3 and 1.532 for vessels of orders 4-10.

Animals↗
PubMed1983

Analysis of blood flow in cat's lung with detailed anatomical and elasticity data.

Recently, a complete set of data on the branching pattern of the cat's pulmonary arterial and venous trees and the elasticity of these blood vessels was obtained in our laboratory. Hence it becomes possible for the first time to perform a theoretical analysis of the blood flow in the lung of an animal based on a set of actual data on anatomy and elasticity. This paper presents an analysis of steady flow of blood in cat's lung. The effect of the vessel elasticity is embodied in the "fifth-power law" and the "sheet-flow" theory. The theory yields the pressure-flow relationship of the whole lung, the longitudinal pressure distribution, and the transit time of blood in the capillaries. These results are compared with available experimental data in the literature.

Animals↗
PubMed1981

Computer-derived image compositing.

A computer-derived composite image is obtained of the details contained in successive photomicrographs taken by optical sectioning of the collagen networks in the pulmonary interalveolar wall. Three-dimensional information is therefore contained in a two-dimensional portrayal, providing a basis for computer digital analysis otherwise not readily available.

Computers↗