PubMed Health⌕ Search

Biomedical subjects

Y F Dufrêne

Publications and source records attributed to Y F Dufrêne.

At least 19 recordsLinked to original sources
PubMed2006

Penetration of surfactin into phospholipid monolayers: nanoscale interfacial organization.

Atomic force microscopy (AFM) combined with surface pressure-area isotherms were used to probe the interfacial behavior of phospholipid monolayers following penetration of surfactin, a cyclic lipopeptide produced by Bacillus subtilis strains. Prior to penetration experiments, interfacial behavior of different surfactin molecules (cyclic surfactins with three different aliphatic chain lengths--S13, S14, and S15--and a linear surfactin obtained by chemical cleavage of the cycle of the surfactin S15) has been investigated. A more hydrophobic aliphatic chain induces greater surface-active properties of the lipopeptide. The opening of the peptide ring reduces the surface activity. The effect of phospholipid acyl chain length (dimyristoylphosphatidylcholine, dipalmitoylphosphatidylcholine- (DPPC), and distearoylphosphatidylcholine) and phospholipid polar head (DPPC, dipalmitoylphosphatidylethanolamine and dipalmitoylphosphatidylserine) on monolayer penetration properties of the surfactin S15 has been explored. Results showed that while the lipid monolayer thickness and the presence of electrostatic repulsions from the interfacial film do not significantly influence surfactin insertion, these parameters strongly modulate the ability of the surfactin to alter the nanoscale organization of the lipid films. We also probed the effect of surfactin structure (influence of the aliphatic chain length and of the cyclic structure of the peptide ring) on the behavior of DPPC monolayers. AFM images and isotherms showed that surfactin penetration is promoted by longer lipopeptide chain length and a cyclic polar head. This indicates that hydrophobic interactions are of main importance for the penetration power of surfactin molecules.

Bacillus subtilis↗
PubMed2006

Fluidics of a nanogap.

We have determined the filling properties of nanogaps with chemically heterogeneous walls. The quantitative criteria we present allow the prediction of the liquid loading of the nanostructure. They can easily be applied in combination with contact-angle measurements on planar substrates of the nanogap materials. We present an application of the theory to a recently developed nanogap biosensor. Chemical force microscopy (CFM) is employed to characterize the initial silanol properties of the gap. The functionality of the complex surface chemistry of the biosensor is demonstrated by the observation of functionalized nanoparticles in the gap with its resulting characteristic current-voltage relationship.

Humans↗
PubMed2005

Nanoscale properties of mixed fengycin/ceramide monolayers explored using atomic force microscopy.

To gain insight into the interactions between fengycin and skin membrane lipids, mixed fengycin/ceramide monolayers were investigated using atomic force microscopy (AFM) (monolayers supported on mica) and surface pressure-area isotherms (monolayers at the air-water interface). AFM topographic images revealed phase separation in mixed monolayers prepared at 20 degrees C/pH 2 and composed of 0.25 and 0.5 fengycin molar ratios, in the form of two-dimensional (2-D) hexagonal crystalline domains of ceramide surrounded by a fengycin-enriched fluid phase. Surface pressure-area isotherms as well as friction and adhesion AFM images confirmed that the two phases had different molecular orientations: while ceramide formed a highly ordered phase with crystalline chain packing, fengycin exhibited a disordered fluid phase with the peptide ring lying horizontally on the substrate. Increasing the temperature and pH to values corresponding to the skin parameters, i.e., 37 degrees C/pH 5, was found to dramatically affect the film organization. At low fengycin molar ratio (0.25), the hexagonal ceramide domains transformed into round domains, while at higher ratio (0.5) these were shown to melt into a continuous fengycin/ceramide fluid phase. These observations were directly supported by the thermodynamic analysis (deviation from the additivity rule, excess of free energy) of the monolayer properties at the air-water interface. Accordingly, this study demonstrates that both the environmental conditions (temperature, pH) and fengycin concentration influence the molecular organization of mixed fengycin/ceramide monolayers. We believe that the ability to modulate the formation of 2-D domains in the skin membrane may be an important biological function of fengycin, which should be increasingly investigated in future pharmacological research.

Journal Article↗
PubMed2005

Interaction of the macrolide antibiotic azithromycin with lipid bilayers: effect on membrane organization, fluidity, and permeability.

PURPOSE: To investigate the effect of a macrolide antibiotic, azithromycin, on the molecular organization of DPPC:DOPC, DPPE:DOPC, SM:DOPC, and SM:Chol:DOPC lipid vesicles as well as the effect of azithromycin on membrane fluidity and permeability. METHODS: The molecular organization of model membranes was characterized by atomic force microscopy (AFM), and the amount of azithromycin bound to lipid membranes was determined by equilibrium dialysis. The membrane fluidity and permeability were analyzed using fluorescence polarization studies and release of calcein-entrapped liposomes, respectively. RESULTS: In situ AFM images revealed that azithromycin leads to the erosion and disappearance of DPPC and DPPE gel domains, whereas no effect was noted on SM and SM:cholesterol domains. Although azithromycin did not alter the permeability of DPPC:DOPC, DPPE:DOPC, SM:DOPC, and SM:Chol:DOPC lipid vesicles, it increased the fluidity at the hydrophilic/hydrophobic interface in DPPC:DOPC and DPPE:DOPC models. This effect may be responsible for the ability of azithromycin to erode the DPPC and DPPE gel domains, as observed by AFM. CONCLUSIONS: This study shows the interest of both AFM and biophysical methods to characterize the drug-membrane interactions.

Anti-Bacterial Agents↗
PubMed2004

Real-time imaging of drug-membrane interactions by atomic force microscopy.

Understanding drug-biomembrane interactions at high resolution is a key issue in current biophysical and pharmaceutical research. Here we used real-time atomic force microscopy (AFM) imaging to visualize the interaction of the antibiotic azithromycin with lipid domains in model biomembranes. Various supported lipid bilayers were prepared by fusion of unilamellar vesicles on mica and imaged in buffer solution. Phase-separation was observed in the form of domains made of dipalmitoylphosphatidylcholine (DPPC), sphingomyelin (SM), or SM/cholesterol (SM/Chl) surrounded by a fluid matrix of dioleoylphosphatidylcholine (DOPC). Time-lapse images collected following addition of 1 mM azithromycin revealed progressive erosion and disappearance of DPPC gel domains within 60 min. We attribute this effect to the disruption of the tight molecular packing of the DPPC molecules by the drug, in agreement with earlier biophysical experiments. By contrast, SM and SM-Chl domains were not modified by azithromycin. We suggest that the higher membrane stability of SM-containing domains results from stronger intermolecular interactions between SM molecules. This work provides direct evidence that the perturbation of lipid domains by azithromycin strongly depends on the lipid nature and opens the door for developing new applications in membrane biophysics and pharmacology.

Androstanes↗
PubMed2004

Controlling the supramolecular organisation of adsorbed collagen layers.

The supramolecular organisation of collagen adsorbed on polymer substrates was investigated as a function of properties of the substrates (chemical nature, roughness) and of characteristics of the collagen solution (concentration, state of aggregation) as well as details of the preparation procedure (adsorption time, drying rate). Elongated structures are formed at the interface by assembly of collagen molecular segments protruding into the solution. This is favoured by using a hydrophobic and smooth substrate, by increasing the adsorbed amount and by increasing the adsorption time, even beyond stages at which the adsorbed amount does no longer vary. Collagen adsorbed at low amount on hydrophobic substrates strongly reorganises into a net-like pattern if drying is performed at low rate. This is due to dewetting and collagen displacement by the water meniscus. Applications derived from the control of collagen organisation are presented. Nanostructured polymer surfaces were created starting from a collagen template. The attachment and the cytoskeletal organisation of mammalian cells (MCF-7/6) were also shown to depend on collagen organisation.

Adsorption↗
PubMed2003

The macrolide antibiotic azithromycin interacts with lipids and affects membrane organization and fluidity: studies on Langmuir-Blodgett monolayers, liposomes and J774 macrophages.

The macrolide antibiotic azithromycin was shown to markedly inhibit endocytosis. Here we investigate the interaction of azithromycin with biomembranes and its effects on membrane biophysics in relation to endocytosis. Equilibrium dialysis and 31P NMR revealed that azithromycin binds to lipidic model membranes and decreases the mobility of phospholipid phosphate heads. In contrast, azithromycin had no effect deeper in the bilayer, based on fluorescence polarization of TMA-DPH and DPH, compounds that, respectively, explore the interfacial and hydrophobic domains of bilayers, and it did not induce membrane fusion, a key event of vesicular trafficking. Atomic force microscopy showed that azithromycin perturbed lateral phase separation in Langmuir-Blodgett monolayers, indicating a perturbation of membrane organization in lateral domains. The consequence of azithromycin/ phospholipid interaction on membrane endocytosis was next evaluated in J774 macrophages by using three tracers with different insertion preferences inside the biological membranes and intracellular trafficking: C6-NBD-SM, TMA-DPH and N-Rh-PE. Azithromycin differentially altered their insertion into the plasma membrane, slowed down membrane trafficking towards lysosomes, as evaluated by the rate of N-Rh-PE self-quenching relief, but did not affect bulk membrane internalization of C6-NBD-SM and TMA-DPH. Azithromycin also decreased plasma membrane fluidity, as shown by TMA-DPH fluorescence polarization and confocal microscopy after labeling by fluorescent concanavalin A. We conclude that azithromycin directly interacts with phospholipids, modifies biophysical properties of membrane and affects membrane dynamics in living cells. This antibiotic may therefore help to elucidate the physico-chemical properties underlying endocytosis.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2001

Imaging mixed lipid monolayers by dynamic atomic force microscopy.

Phase imaging with tapping mode atomic force microscopy (AFM) and force modulation microscopy were used to probe the mechanical properties of phase-separated lipid monolayers made of a mixture (0.25:0.75) of the surface-active lipopeptide surfactin and of dipalmitoylphosphatidylcholine (DPPC). The pi-A isotherms and the result of a molecular modeling study revealed a loose, 2-D liquid-like organization for the surfactin molecules and a closely packed, 2-D solid-like organization for DPPC molecules. This difference in molecular organization was responsible for a significant contrast in height, tapping mode phase and force modulation amplitude images. Phase imaging at light tapping, i.e., with a ratio of the set-point tapping amplitude with respect to the free amplitude A(sp)/A(0) approximately 0.9, showed larger phase shifts on the solid-like DPPC domains attributed to larger Young's modulus. However, contrast inversion was observed for A(sp)/A(0)<0.7, suggesting that at moderate and hard tapping the image contrast was dominated by the probe-sample contact area. Surprisingly, force modulation amplitude images showed larger stiffness for the liquid-like surfactin domains, suggesting that the contrast was dominated by contact area effects rather than by Young's modulus. These data emphasize the complex nature of the contrast mechanisms of dynamic AFM images recorded on mixed lipid monolayers.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2001

Probing molecular interactions and mechanical properties of microbial cell surfaces by atomic force microscopy.

Knowledge of the surface properties of microbial cells is a key to gain a detailed understanding of their functions in the natural environment and to efficiently exploit them in biotechnological processes. In this paper, we present force-distance curves recorded, by atomic force microscopy (AFM) in aqueous solutions, on various microbial samples: reconstituted S-layers, whole fungal spores and several bacterial strains. The approach and retraction curves exhibited important differences--depending on the type of microorganism, on the physiological state (dormancy versus germination) and on the environmental conditions (ionic strength)--which were shown to reflect differences in long-range surface forces, adhesion forces and mechanical properties. These data illustrate the great potential of AFM force measurements to elucidate the physical properties of microbial cells and to understand, at the molecular level, biointerfacial phenomena such as cell adhesion and cell aggregation.

Cell Adhesion↗
PubMed2001

Application of atomic force microscopy to microbial surfaces: from reconstituted cell surface layers to living cells.

The application of atomic force microscopy (AFM) to probe the ultrastructure and physical properties of microbial cell surfaces is reviewed. The unique capabilities of AFM can be summarized as follows: imaging surface topography with (sub)nanometer lateral resolution; examining biological specimens under physiological conditions; measuring local properties and interaction forces. AFM is being used increasingly for: (i) visualizing the surface ultrastructure of microbial cell surface layers, including bacterial S-layers, purple membranes, porin OmpF crystals and fungal rodlet layers; (ii) monitoring conformational changes of individual membrane proteins; (iii) examining the morphology of bacterial biofilms, (iv) revealing the nanoscale structure of living microbial cells, including fungi, yeasts and bacteria, (v) mapping interaction forces at microbial surfaces, such as van der Waals and electrostatic forces, solvation forces, and steric/bridging forces; and (vi) probing the local mechanical properties of cell surface layers and of single cells.

Bacteria↗
PubMed2000

Advances in the characterization of supported lipid films with the atomic force microscope.

During the past decade, the atomic force microscope (AFM) has become a key technique in biochemistry and biophysics to characterize supported lipid films, as testified by the continuous growth in the number of papers published in the field. The unique capabilities of AFM are: (i) capacity to probe, in real time and in aqueous environment, the surface structure of lipid films; (ii) ability to directly measure physical properties at high spatial resolution; (iii) possibility to modify the film structure and biophysical processes in a controlled way. Such experiments, published up to June 2000, are the focus of the present review. First, we provide a general introduction on the preparation and characterization of supported lipid films as well as on the principles of AFM. The section 'Structural properties' focuses on the various applications of AFM for characterizing the structure of supported lipid films: visualization of molecular structure, formation of structural defects, effect of external agents, formation of supported films, organization of phase-separated films (coexistence region, mixed films) and, finally, the use of supported lipid bilayers for anchoring biomolecules such as DNA, enzymes and crystalline protein arrays. The section 'Physical properties' introduces the principles of force measurements by AFM, interpretation of these measurements and their recent application to supported lipid films and related structures. Finally, we highlight the major achievements brought by the technique and some of the current limitations.

Air↗
PubMed2000

Implementation of force differentiation in the immunoassay.

A technique has been developed to apply force to the antibody-antigen complex in a solid-phase immunoassay. Force was applied to the immunochemical complex by labeling the secondary antibody with a magnetically susceptible, micrometer-size particle and placing the assay chamber in a magnetic field of defined magnitude and orientation. The force was strong enough to displace weakly bound particles but was not strong enough to rupture the immunochemical complex. The number of particles bound to the surface after applying the differentiation force was related to the analyte concentration, thus an optical detection scheme was developed for counting the number of particles on the surface. The sensitivity of the force differentiation assay was demonstrated to be one to two orders of magnitude higher than conventional solid-phase immunoassay techniques for model protein, virus, and bacterial analytes, with 99% specificity. The enhanced sensitivity of this assay appears to result from lowering the assay background through the identification of weakly adhesive, nonspecific interactions.

Antigen-Antibody Complex↗
PubMed2000

Atomic force microscope image contrast mechanisms on supported lipid bilayers.

This work presents a methodology to measure and quantitatively interpret force curves on supported lipid bilayers in water. We then use this method to correlate topographic imaging contrast in atomic force microscopy (AFM) images of phase-separated Langmuir-Blodgett bilayers with imaging load. Force curves collected on pure monolayers of both distearoylphosphatidylethanolamine (DSPE) and monogalactosylethanolamine (MGDG) and dioleoylethanolamine (DOPE) deposited at similar surface pressures onto a monolayer of DSPE show an abrupt breakthrough event at a repeatable, material-dependent force. The breakthrough force for DSPE and MGDG is sizable, whereas the breakthrough force for DOPE is too small to measure accurately. Contact-mode AFM images on 1:1 mixed monolayers of DSPE/DOPE and MGDG/DOPE have a high topographic contrast at loads between the breakthrough force of each phase, and a low topographic contrast at loads above the breakthrough force of both phases. Frictional contrast is inverted and magnified at loads above the breakthrough force of both phases. These results emphasize the important role that surface forces and mechanics can play in imaging multicomponent biomembranes with AFM.

Diglycerides↗
PubMed2000

Direct probing by atomic force microscopy of the cell surface softness of a fibrillated and nonfibrillated oral streptococcal strain.

In this paper, direct measurement by atomic force microscopy (AFM) of the cell surface softness of a fibrillated oral streptococcal strain Streptococcus salivarius HB and of a nonfibrillated strain S. salivarius HBC12 is presented, and the data interpretation is validated by comparison with results from independent techniques. Upon approach of the fibrillated strain in water, the AFM tip experienced a long-range repulsion force, starting at approximately 100 nm, attributed to the compression of the soft layer of fibrils present at the cell surface. In 0.1 M KCl, repulsion was only experienced when the tip was closer than approximately 10 nm, reflecting a stiffer cell surface due to collapse of the fibrillar mass. Force-distance curves indicated that the nonfibrillated strain, probed both in water and in 0.1 M KCl, was much stiffer than the fibrillated strain in water, and a repulsion force was experienced by the tip at close approach only (20 nm in water and 10 nm in 0.1 M KCl). Differences in cell surface softness were further supported by differences in cell surface morphology, the fibrillated strain imaged in water being the only specimen that showed characteristic topographical features attributable to fibrils. These results are in excellent agreement with previous indirect measurements of cell surface softness by dynamic light scattering and particulate microelectrophoresis and demonstrate the potential of AFM to directly probe the softness of microbial cell surfaces.

Biophysical Phenomena↗
PubMed2000

Direct characterization of the physicochemical properties of fungal spores using functionalized AFM probes.

A new method is described for characterizing the physicochemical properties of native microbial cells by using atomic force microscopy (AFM) with chemically functionalized probes. Adhesion forces were measured, under deionized water, between probes and model substrata functionalized with alkanethiol self-assembled monolayers terminated with OH and CH(3) groups. These were found to be 6 +/- 2 nN (n = 1024), 0.9 +/- 0.4 nN, and approximately 0 nN, for CH(3)/CH(3), CH(3)/OH, and OH/OH surfaces, respectively, and were not significantly influenced by changes of ionic strength (0.1 M NaCl versus deionized water). This shows that functionalized probes are very sensitive to changes of surface hydrophobicity. Using OH- and CH(3)-terminated probes, patterns of rodlets, approximately 10 nm in diameter, were visualized, under physiological conditions, at the surface of spores of Phanerochaete chrysosporium. Multiple (1024) force-distance curves recorded over 500 x 500-nm areas at the spore surface, either in deionized water or in 0.1 M NaCl solutions, always showed no adhesion for both OH- and CH(3)-terminated probes. Control experiments indicated that the lack of adhesion is not due to transfer of cellular material onto the probe, but to the hydrophilic nature of the spore surface.

Cell Adhesion↗
PubMed1999

Nanometer scale organization of mixed surfactin/phosphatidylcholine monolayers.

Mixed monolayers of the surface-active lipopeptide surfactin-C(15) and of dipalmitoyl phosphatidylcholine (DPPC) were deposited on mica and their nanometer scale organization was investigated using atomic force microscopy (AFM) and x-ray photoelectron spectroscopy (XPS). AFM topographic images revealed phase separation for mixed monolayers prepared at 0.1, 0.25, and 0.5 surfactin molar ratios. This was in agreement with the monolayer properties at the air-water interface indicating a tendency of the two compounds to form bidimensional domains in the mixed systems. The step height measured between the surfactin and the DPPC domains was 1.2 +/- 0.1 nm, pointing to a difference in molecular orientation: while DPPC had a vertical orientation, the large peptide ring of surfactin was lying on the mica surface. The N/C atom concentration ratios obtained by XPS for pure monolayers were compatible with two distinct geometric models: a random layer for surfactin and for DPPC, a layer of vertically-oriented molecules in which the polar headgroups are in contact with mica. XPS data for mixed systems were accounted for by a combination of the two pure monolayers, considering respective surface coverages that were in excellent agreement with those measured by AFM. These results illustrate the complementarity of AFM and XPS to directly probe the molecular organization of multicomponent monolayers.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed1999

Direct probing of the surface ultrastructure and molecular interactions of dormant and germinating spores of Phanerochaete chrysosporium.

Atomic force microscopy (AFM) has been used to probe, under physiological conditions, the surface ultrastructure and molecular interactions of spores of the filamentous fungus Phanerochaete chrysosporium. High-resolution images revealed that the surface of dormant spores was uniformly covered with rodlets having a periodicity of 10 +/- 1 nm, which is in agreement with earlier freeze-etching measurements. In contrast, germinating spores had a very smooth surface partially covered with rough granular structures. Force-distance curve measurements demonstrated that the changes in spore surface ultrastructure during germination are correlated with profound modifications of molecular interactions: while dormant spores showed no adhesion with the AFM probe, germinating spores exhibited strong adhesion forces, of 9 +/- 2 nN magnitude. These forces are attributed to polysaccharide binding and suggested to be responsible for spore aggregation. This study represents the first direct characterization of the surface ultrastructure and molecular interactions of living fungal spores at the nanometer scale and offers new prospects for mapping microbial cell surface properties under native conditions.

Microscopy, Atomic Force↗