Biomedical subjects

Y Lvov

Publications and source records attributed to Y Lvov.

6 recordsLinked to original sources

PubMed2001

Biocolloids with ordered urease multilayer shells as enzymatic reactors.

The preparation of biocolloids with organized enzyme-containing multilayer shells for exploitation as colloidal enzymatic nanoreactors is described. Urease multilayers were assembled onto submicrometer-sized polystyrene spheres by the sequential adsorption of urease and polyelectrolyte, in a predetermined order, utilizing electrostatic interactions for layer growth. The catalytic activity of the biocolloids increased proportionally with the number of urease layers deposited on the particles, demonstrating that biocolloid particles with tailored enzymatic activities can be produced. It was further found that precoating the latex spheres with nanoparticles (40-nm silica or 12-nm magnetite) enhanced both the stability (with respect to adsorption) and enzymatic activity of the urease multilayers. The presence of the magnetite nanoparticle coating also provided a magnetic function that allowed the biocolloids to be easily and rapidly separated with a permanent magnet. The fabrication of such colloids opens new avenues for the application of bioparticles and represents a promising route for the creation of complex catalytic particles.

Colloids↗

PubMed2001

Charge-dependent sidedness of cytochrome P450 forms studied by quartz crystal microbalance and atomic force microscopy.

Quartz crystal microbalance (QCM) resonance measurements were used to examine the surface charge characteristics of cytochrome P450 forms and the influence of charge on the docking of redox partners like cytochrome b5. The distal surface of cytochrome P450 (CYP)101 (pI = 4.5), relative to the heme, is fairly anionic, as is the proximal surface. The latter, however, also has two cationic clusters. A considerably greater extent of CYP101 binding was seen to the cationic, polyethylene-surfaced resonators. CYP2B4 (pI = 8.5) preferentially bound to the polyanionic, polystyrene sulfonate-surfaced resonators. Cytochrome b5 is an acidic protein that had a preferential binding to the poly(ethyleneimine (PEI)-surfaced resonators. When binding to CYP2B4-surfaced films, cytochrome b5 preferentially bound to those cytochrome P450 molecules that were adsorbed to cationic (PEI) films. It is suggested that adsorption of CYP2B4 to an anionic poly(styrenesulfonate) (PSS) surface is with cationic clusters that include the cytochrome b5 docking domain. This diminishes the extent of docking of the cytochrome b5. In contrast, when CYP2B4 is adsorbed to a cationic film the proximal surface with the cytochrome b5-docking site is available for cytochrome b5 binding. A film of the polycation PEI was adsorbed to the silver QCM surface. It formed polymer islands when viewed with atomic force microscopy. Polyanionic PSS was adsorbed intermittently with the PEI. By the third and fourth layer of polyions the polymer islands were essentially merged and protein adsorption as a fourth or fifth layer formed a nearly continuous film. CYP101 was seen to adsorb as globules with a molecular diameter of about 10 nm. CYP2B4 adsorbed to the polyionic films had a slightly elliptical globular shape, also with a molecular diameter of about 10 nm.

Adsorption↗

PubMed2000

Electroactive Films of Alternately Layered Polycations and Iron-Sulfur Protein Putidaredoxin on Gold.

Layered, electrochemically active films of bacterial iron-sulfur protein putidaredoxin (Pdx) and poly(dimethyldiallyammonium) (PDDA) polycations were constructed on gold electrodes coated with mercaptopropane sulfonate (MPS) and on quartz slides. Second-derivative UV-vis spectra suggested similar structures of Pdx in films and solutions at pH 7. Direct electrochemistry was achieved between Pdx and gold electrodes in these films, with significantly better electrochemical reversibility than in cast Nafion-lipid-Pdx films. A formal potential dispersion model gave a good fit to square wave voltammograms by regression analysis and was used to estimate an average apparent rate constant of 4.5 s(-1). Reduced Pdx in the polyion films did not react with its natural redox partner cytochrome P450(cam) because of unfavorable thermodynamics in the film environment. Copyright 2000 Academic Press.

Journal Article↗

PubMed1999

Fast reversible electron transfer for photosynthetic reaction center from wild type Rhodobacter sphaeroides re-constituted in polycation sandwiched monolayer film.

Direct reversible electron transfer for photosynthetic reaction center from wild type Rhodobacter sphaeroides re-constituted in polycation sandwiched monolayer film was observed in this work. The redox potential E0' = 0.46 V vs. NHE for first primary donor redox couple P/P+ was accurately measured from reversible CV or SWV peaks, which were quite close to those obtained from optic redox titration method. Reaction center (RC) in film was found re-constituted in such an ordered way that the orientation of RC favored the electron transfer in film. Thus, the protein electroactivity seems to be turned on in this artificial biomimic thin film. Furthermore, RC in the film features a photo-induced redox-peak fluctuation, suggesting an intact and functional state for RC in such film. Redox peaks were also found dependent of pH, implying a proton-coupled electron transfer occurring in film. Charge recombination was observed accompanied with change of electrochemical driving force. Electrochemical model assuming several classes of electroactive sites in the films on the electrode with a dispersion of standard potentials successfully fits SWV experimental data at different pulse height and frequency.

Electrochemistry↗

PubMed1998

Ultrathin films of charged polysaccharides assembled alternately with linear polyions.

As a means of preparation of biocompatible molecular surfaces, an alternate assembly of charged polysaccharides and oppositely-charged synthetic polymers was conducted. Cationic chitosan was assembled alternately with anionic poly(sodium styrenesulfonate) (PSS) at pH 4. Regular film growth and its dependence on ionic strength were detected by the quartz crystal microbalance (QCM) method. Averaged film thicknesses for the chitosan + PSS layer were 15, 31, 46, and 69 A, respectively, when 0, 0.25, 0.5, and 1 M of NaCl was contained in aqueous chitosan. Adsorption of chitosan did not reach saturation in 20 min at 0 M NaCl, while the adsorption became saturated within 6 min with 0.25 M NaCl. Anionic sodium chondroitin sulfate was also assembled in alternation with cationic poly(dimethyldiallylammonium chloride) (PDDA) at pH 6.5. The adsorption of chondroitin sulfate was less sensitive to ionic strength. Surface morphology of chitosan-PSS films was investigated by non-contact atomic force microscopy (AFM) observation. Maximum height difference and Ra value for a 1000 x 1000 nm area were 11 and 0.69 nm, respectively, indicating the formation of a molecularly flat surface by alternate layer-by-layer adsorption.

Adsorption↗

PubMedDate not supplied

In-vitro release characteristics of tetracycline HCl, khellin and nicotinamide adenine dineculeotide from halloysite; a cylindrical mineral.

The use of halloysite clay as a low cost alternative to more traditional microencapsulation systems is reported. Halloysite is an alumino-silicate clay which demonstrates a predominately cylindrical geometry, uniquely characterized by a hollow core or series of voids with diameters ranging from 16-50 nm. These nanoscale-to-mesoscale microcylinders are capable of entrapping active agents within the core lumen as well as within any void spaces contained in the multilayered walls of the cylinder. Some of the active agents associated with the clay are also bound to the external surfaces of the clay. Delivery of the active agent is first by desorption of the active agent from the exterior surfaces and exposed ends of the microcylinders, and is followed by a second more prolonged phase dominated by pore diffusion from the ends of the cylinders. Halloysite is capable of retaining and releasing a range of active ingredients. Both hydrophilic and hydrophobic agents may be entrapped following appropriate pre-treatment of the clay to render it lipophilic. Here, a unique low cost alternative microcylindrical delivery system: the clay mineral halloysite, is investigated.

Aluminum Silicates↗