PubMed Health⌕ Search

Biomedical subjects

Yadong Li

Publications and source records attributed to Yadong Li.

At least 19 recordsLinked to original sources

Mechanism of histone demethylase KDM5A in osteoporotic fracture healing through epigenetic regulation of the miR-495/SKP2/Runx2 axis.

BACKGROUND: Osteoporosis represents a salient metabolic bone disorder. Histone demethylase plays a vital role in bone development and homeostasis. This study explored the mechanism of histone demethylase KDM5A affecting osteoporotic fracture healing via the miR-495/SKP2/Runx2 axis. METHODS: The murine model of osteoporotic fracture was established. The bone mineral density, maximum elastic stress, and maximum load were tested. The relative trabecular bone volume, bone trabecular thickness, and trabecular number at the proximal end of tibia were detected. The histopathological changes of femur tissues and bone microstructure were observed. Expressions of KDM5A and osteogenic factors were detected. The cell proliferation, alkaline phosphatase activity, and calcified nodules were measured. The binding relationships between KDM5A and miR-495 promoter, and miR-495 and SKP2 were verified. The interaction between SKP2 and Runx2 was detected. The ubiquitination level of Runx2 and the stability of Runx2 protein were detected. RESULTS: KDM5A was highly expressed in the murine model of osteoporotic fracture. Interference of KDM5A expression facilitated fracture healing in osteoporotic mice. KDM5A downregulated miR-495 expression by promoting the H3K4me3 methylation of the miR-495 promoter. Inhibition of miR-495 reversed the effect of KDM5A silencing on osteoblast proliferation, differentiation, and mineralization. miR-495 facilitated osteoblast proliferation, differentiation, and mineralization by targeting SKP2. SKP2 suppressed Runx2 expression through ubiquitination degradation. Inhibition of Runx2 reversed the promoting effect of SKP2 silencing on osteogenic differentiation. CONCLUSION: KDM5A attenuated the inhibition of miR-495 on SKP2 and promoted the ubiquitination degradation of Runx2 protein by SKP2, thereby repressing osteoblast differentiation and retarding osteoporotic fracture healing.

Animals↗

Treatment of waste printed wire boards in electronic waste for safe disposal.

The printed wire boards (PWBs) in electronic waste (E-waste) have been found to contain large amounts of toxic substances. Studies have concluded that the waste PWBs are hazardous wastes because they fails the toxicity characteristic leaching procedure (TCLP) test with high level of lead (Pb) leaching out. In this study, two treatment methods - high-pressure compaction and cement solidification - were explored for rendering the PWBs into non-hazardous forms so that they may be safely disposed or used. The high-pressure compaction method could turn the PWBs into high-density compacts with significant volume reduction, but the impact resistance of the compacts was too low to keep them intact in the environment for a long run. In contrast, the cement solidification could turn the PWBs into strong monoliths with high impact resistance and relatively high compressive strength. The leaching of the toxic heavy metal Pb from the solidified samples was evaluated by both a dynamic leaching test and the TCLP test. The dynamic leaching results revealed that Pb could be effectively confined in the solidified products under very harsh environmental conditions. The TCLP test results showed that the leaching level of Pb was far below the regulatory level of 5mg/L, suggesting that the solidified PWBs are no longer hazardous. It was concluded that the cement solidification is an effective way to render the waste PWBs into environmentally benign forms so that they can be disposed of as ordinary solid wastes or beneficially used in the place of concrete in some applications.

Electronics↗

Solution-based synthetic strategies for 1-D nanostructures.

One-dimensional (1-D) nanostructures of materials have received great research attention because of their unique photochemistry, photophysical, and electron-transport properties different from those of bulky or nanoparticle materials. One of the main challenges in this field is how to precisely control the sizes, dimensionalities, compositions, and crystal structures of materials in nanoscale. This review summarizes the recent progress in the solution-based routes to prepare 1-D nanostructures, highlighting the contribution from this laboratory. Crystal structure as one of the inherent factors that may determine the growth behavior of the nanocrystals is emphasized in this paper. Particularly compounds with layered structures or anistropic crystal structures are given special attention in the controlled growth of 1-D nanostructures. This review aims to present a relatively general understanding of the correlation between the crystal structure and growth behavior of materials under solution-based conditions and show how to choose appropriate conditions for the growth of 1-D nanostructures.

Journal Article↗

Hydrothermal synthesis of rare-earth fluoride nanocrystals.

In this paper, a hydrothermal synthetic route has been developed to prepare a class of rare-earth fluoride nanocrystals, which have shown gradual changes in growth modes with decreasing ionic radii and may serve as a model system for studying the underlying principle in the controlled growth of rare-earth nanocrystals. Furthermore, we demonstrate the functionalization of these nanocrystals by means of doping, which have shown visible-to-the-naked-eye green up-conversion emissions and may find application in biological labeling fields.

Fluorides↗

One-pot synthesis and bioapplication of amine-functionalized magnetite nanoparticles and hollow nanospheres.

To demonstrate their applications in biological and medical fields such as in immunoassays, magnetic separation of cells or proteins, drug or gene delivery, and magnetic resonance imaging, the template-free syntheses of water-soluble and surface functionalized magnetic nanomaterials have become essential and are challenging. Herein, we developed a facile one-pot template-free method for the preparation of amine-functionalized magnetite nanoparticles and hollow nanospheres by using FeCl(3)6 H(2)O as single iron source. These magnetic nanomaterials were characterized by TEM, SEM, XRD, and FTIR technologies. Their magnetic properties were also studied by using a superconducting quantum interference device (SQUID) magnetometer at room temperature. Then the amine-functionalized magnetite nanoparticles were applied to immunoassays and magnetic resonance imaging in live mice.

Amines↗

Synthesis and characterization of sulfide and selenide colloidal semiconductor nanocrystals.

In this paper, we demonstrate the synthesis of sulfide and selenide nanocrystals in a water-ethanol mixed solution system. This synthetic way was based on the direct reactions between metal ions and S(2-)/Se. Linoleic acid was adopted to protect the nanocrystals from agglomeration. Without involving extreme experimental conditions, this less toxic synthetic route can be expected to bring more opportunities to nanocrystal-related research and application fields.

Journal Article↗

Self-assembly of uniform hexagonal yttrium phosphate nanocrystals.

We report a facile chemical route for the synthesis of uniform hexagonal yttrium phosphate hydrate nanocrystals and their assembly into close-packed regular superstructures through noncovalent interactions of long chain molecules attached to the surfaces of inorganic nanocrystals.

Journal Article↗

Green upconversion nanocrystals for DNA detection.

By combining magnetic-field-assisted bioseparation and concentration technology with magnetite nanoparticles, novel green upconversion (UC) fluorescence nanocrystals (NaYF4:Yb3+/Er3+) have been applied to the sensitive detection of DNA.

Color↗

Near monodisperse TiO2 nanoparticles and nanorods.

Highly crystalline, near monodisperse TiO2 nanoparticles, nanorods and their metal-ion-doped (Sn4+, Fe3+, Co2+, and Ni2+, etc.) derivatives have been prepared by well-controlled solvothermal reactions. Through adjusting the reaction parameters, such as reaction temperature, duration, and concentration of the reactants, the size, shape, and dispersibility of the products can be controlled. A possible reaction mechanism can be proposed based on experimental evidence.

Journal Article↗

Use of carbonaceous polysaccharide microspheres as templates for fabricating metal oxide hollow spheres.

A general method for the synthesis of metal oxide hollow spheres has been developed by using carbonaceous polysaccharide microspheres prepared from saccharide solution as templates. Hollow spheres of a series of metal oxides (SnO2, Al2O3, Ga2O3, CoO, NiO, Mn3O4, Cr2O3, La2O3, Y2O3, Lu2O3, CeO2, TiO2, and ZrO2) have been prepared in this way. The method involves the initial absorption of metal ions from solution into the functional surface layer of carbonaceous saccharide microspheres; these are then densified and cross-linked in a subsequent calcination and oxidation procedure to form metal oxide hollow spheres. Metal salts are used as starting materials, which widens the accessible field of metal oxide hollow spheres. The carbonaceous colloids used as templates have integral and uniform surface functional layers, which makes surface modification unnecessary and ensures homogeneity of the shell. Macroporous films or cheese-like nanostructures of oxides can also be prepared by slightly modified procedures. XRD, TEM, HRTEM, and SAED have been used to characterize the structures. In a preliminary study on the gas sensitivity of SnO2 hollow spheres, considerably reduced "recovery times" were noted, exemplifying the distinct properties imparted by the hollow structure. These hollow or porous nanostructures have the potential for diverse applications, such as in gas sensitivity or catalysis, or as advanced ceramic materials.

Crystallography, X-Ray↗

A vapor-solid strategy to silica sheathed metal nanostructures and microstructures via reactions of metal chlorides with silicon.

A facile vapor-solid strategy has been developed to prepare silica-sheathed metal micro/nanostructures with controllable shapes. As examples, silica-sheathed nickel nanowires (diameter approximately 50 nm), microcubes (edge length 1-3 microm), nanocubes (edge length approximately 200 nm) with an epitaxial tail (diameter<100 nm), and 1D assembly structures of nanoparticles (particle diameter<100 nm) as well as silica-sheathed cobalt and copper micro/nanostructures are synthesized. The possible reaction and growth mechanisms of Ni/SiO2 structures are discussed. The method is expected to be applied to a wider range of metals.

Journal Article↗

Microstructure-hardened silver nanowires.

To exploit the novel size-dependent mechanical properties of nanowires, it is necessary for one to develop strategies to control the strength and toughness of these materials. Here, we report on the mechanical properties of silver nanowires with a unique fivefold twin structure using a lateral force atomic force microscopy (AFM) method in which wires are held in a double-clamped beam configuration. Force-displacement curves exhibit super elastic behavior followed by unexpected brittle failure without significant plastic deformation. Thermal annealing resulted in a gradual transition to weaker, more ductile materials associated with the elimination of the twinned boundary structure. These results point to the critical roles of microstructure and confinement in engineering the mechanical properties of nanoscale materials.

Journal Article↗

Na(Y1.5 Na0.5)F6 single-crystal nanorods as multicolor luminescent materials.

A facile wet chemical synthesis method was used to prepare a range of single-crystal Na(Y1.5 Na0.5)F6 nanorods with controllable aspect ratios. Their novel multicolor upconversion (UC) fluorescence has been successfully realized by doping Yb3+/Er3+ (green) and Yb3+/Tm3+ (blue) ion pairs. When doped with Eu3+ and Tb3+ ions, the strong red and green downconversion (DC) fluorescence has also been observed, respectively. Being covered with oleic acids, these luminescent nanorods have been transparently dispersed in nonpolar solvent. For their unique luminescence and controllable morphology and surface properties, these nanorods may find great applications in the fields of color displays, biolabels, light-emitting diodes (LEDs), optical storage, optoelectronics, anticounterfeiting, and solid-state lasers.

Color↗

Controlled hydrothermal synthesis and structural characterization of a nickel selenide series.

A series of nickel selenides (NiSe2 microcrystals, Ni(1-x)Se and Ni3Se2 microspheres) has been successfully synthesized through a convenient, low-temperature hydrothermal method. A good nucleation and growth environment has been created by forming a uniform and transparent solution reaction system. The compositions (including the x value of Ni(1-x)Se), phase structures, as well as the morphologies of nickel selenides, can be controlled by adjusting the Ni/Se ratio of the raw materials, the pH, the reaction temperatures and times, and so forth. The newly produced Se microspheres in the system have been used as both reactant and in situ template to the Ni(1-x)Se microspheres. It is found that Ni(1-x)Se microspheres act as the intermediate precursor during the formation of Ni3Se2 microspheres. Under certain conditions, hexagonal NiSe microspheres can be converted into rhombohedral NiSe nanowires in solution. The formation mechanisms of a series of nickel selenides has been investigated in detail by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses. This work has provided a general, simple, and effective method to control the composition, phase structure, and morphology of metal selenides in aqueous solution, which will be important for inorganic synthesis methodology and further applications of selenides.

Journal Article↗

Chromate nanorods/nanobelts: general synthesis, characterization, and properties.

A general synthesis route to a family of single-crystal chromate nanorods/nanobelts has been established. The effects of pH and surfactant on phase and morphology of these microcrystalline materials have been investigated. The physical properties of the as-synthesized chromate nanocrystals such as dielectric, electrochemical, UV-vis absorbance, and photoluminescent properties have also been studied. The present general synthesis of various low-dimensional chromate nanomaterials provides useful information on the possible synthesis of other microcrystalline transition metal oxysalts.

Journal Article↗

Controlled hydrothermal synthesis of bismuth oxyhalide nanobelts and nanotubes.

Ternary bismuth oxyhalide crystalline nanobelts (such as Bi24O31Br10, Bi3O4Br, Bi12O17Br2, BiOCl, and Bi24O31Cl10) and nanotubes (such as Bi24O31Br10) have been synthesized by using convenient hydrothermal methods. The composition and morphologies of the bismuth oxyhalides could be controlled by adjusting some growth parameters, including reaction pH, time, and temperature. All the nanostructures were characterized by using various methods including X-ray diffraction, transmission electron microscopy, high-resolution TEM, electron diffraction, and energy-dispersive X-ray analysis. The possible reaction mechanism and growth of the crystals are discussed based on the experimental results.

Bismuth↗