PubMed Health⌕ Search

Biomedical subjects

Yen Wei

Publications and source records attributed to Yen Wei.

16 recordsLinked to original sources
PubMed2007

Synthesis and characterization of electroactive and biodegradable ABA block copolymer of polylactide and aniline pentamer.

A triblock copolymer PLA-b-AP-b-PLA (PAP) of polylactide (PLA) and aniline pentamer (AP) with the unique properties of being both electroactive and biodegradable is synthesized by coupling an electroactive carboxyl-capped AP with two biodegradable bi-hydroxyl-capped PLAs via a condensation reaction. Three different molecule weight PAP copolymers are prepared. The PAP copolymers exhibit excellent electroactivity similar to the AP and polyaniline, which may stimulate cell proliferation and differentiation. The electrical conductivity of the PAP2 copolymer film ( approximately 5x10(-6)S/cm) is in the semiconducting region. Transmission electron microscopic results suggest that there is microphase separation of the two block segments in the copolymer, which might contribute to the observed conductivity. The biodegradation and biocompatibility experiments in vitro prove the copolymer is biodegradable and biocompatible. Moreover, these new block copolymer shows good solubility in common organic solvents, leading to the system with excellent processibility. These biodegradable PAP copolymers with electroactive function thus possess the properties that would be potentially used as scaffold materials for neuronal or cardiovascular tissue engineering.

Absorbable Implants↗
PubMed2006

Electromagnetic functionalized and core-shell micro/nanostructured polypyrrole composites.

Core-shell micro/nanostructured and electromagnetic functionalized polypyrrole (PPy) composites were prepared by a self-assembly process associated with the template method in the presence of p-toluenesulfonate acid (p-TSA) as the dopant, in which the spherical hydroxyl iron (Fe[OH], 0.5-5 microm in diameter) functioned not only as the hard template, but also as the "core" of the micro/nanostructure, and the self-assembled PPy-p-TSA nanofibers (20-30 nm in diameter) acted as the "shell" (50-100 nm in thickness) of the microspheres. We found that the core-shell micro/nanostructures exhibit controllable electromagnetic properties by adjusting the mass ratio of Fe[OH] to pyrrole monomer. The micelle model was proposed to interpret the self-assembly of the core-shell micro/nanostructured composites.

Journal Article↗
PubMed2006

Micellization and reversible pH-sensitive phase transfer of the hyperbranched multiarm PEI-PBLG Copolymer.

A novel, hyperbranched, amphiphilic multiarm biodegradable polyethylenimine-poly(gamma-benzyl-L-glutamate) (PEI-PBLG) copolymer was prepared by the ring-opening polymerization of gamma-benzyl-L-glutamate-N-carboxyanhydride (BLG-NCA) with hyperbranched PEI as a macroinitiator. The copolymer could self-assemble into core-shell micelles in aqueous solution with highly hydrophobic micelle cores. As the PBLG content was increased, the size of the micelles increased and the critical micelle concentration (CMC) decreased. The surface of the micelles had a positive zeta potential. The cationic micelles were capable of complexing with plasmid DNA (pDNA), which could be released subsequently by treatment with polyanions. The PEI-PBLG copolymer formed unimolecular micelles in chloroform solution. The pH-sensitive phase-transfer behavior exhibited two critical pH points for triggering the encapsulation and release of guest molecules. Both the encapsulation and release processes were rapid and reversible. Under strong acidic or alkaline conditions, the release process became partially or completely irreversible. Thus, this copolymer system should be an attractive candidate for a gene- or drug-delivery system in aqueous media and could provide the phase-transfer carriers between water and organic media.

Biodegradation, Environmental↗
PubMed2006

Microporous metal-organic framework constructed from heptanuclear zinc carboxylate secondary building units.

A novel, three-dimensional, noninterpenetrating microporous metal-organic framework (MOF), [Zn7O2(pda)5(H2O)2]5 DMF4 EtOH 6 H2O (1) (H2PDA=p-phenylenediacrylic acid, DMF=N,N-dimethylformamide, EtOH=ethanol), was synthesized by constructing heptanuclear zinc carboxylate secondary building units (SBUs) and by using rigid and linear aromatic carboxylate ligands, PDA. The X-ray crystallographic data reveals that the seven zinc centers of 1 are held together with ten carboxylate groups of the PDA ligands and four water molecules to form a heptametallic SBU, Zn7O4(CO2)10, with dimensions of 9.8 x 9.8 x 13.8 A3. Furthermore, the heptametallic SBUs are interconnected by PDA acting as linkers, thereby generating an extended network with a three-dimensional, noninterpenetrating, intersecting large-channel system with spacing of about 17.3 A. As a microporous framework, polymer 1 shows adsorption behavior that is favorable towards H2O and CH3OH, and substantial H2 uptake. In terms of the heptanuclear zinc carboxylate SBUs, polymer 1 exhibits interesting photoelectronic properties, which would facilitate the exploration of new types of semiconducting materials, especially among MOFs containing multinuclear metal carboxylate SBUs.

Journal Article↗
PubMed2006

Large-scale synthesis of tungsten oxide nanofibers by electrospinning.

We show in this communication that large-scale synthesis of orthorhombic WO3 nanofibers can be obtained via a simple electrospinning method. The morphology and the crystal structure are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), FTIR, X-ray diffraction patterns (XRD) and X-ray photoelectron spectra (XPS) spectra. SEM and TEM images showed that the diameter of the obtained WO3 nanofibers is between 100 and 500 nm. The structure of the obtained WO3 nanofibers was characterized by FTIR, XRD, and XPS spectra. The photoluminescence of the obtained WO3 nanofibers were also investigated.

Journal Article↗
PubMed2006

Supramolecular Polypseudorotaxanes composed of star-shaped porphyrin-cored poly(epsilon-caprolactone) and alpha-cyclodextrin.

Star-shaped porphyrin-cored poly(epsilon-caprolactone) (SPPCL) was synthesized using a tetrahydroxyethyl-terminated porphyrin as a core initiator and stannous octoate as a catalyst in bulk at 120 degrees C. The molecular weight of as-synthesized polymer could be adjusted linearly by controlling the molar ratio of epsilon-caprolactone to porphyrin core initiator, and the molecular weight distribution was reasonably narrow. Supramolecular polypseudorotaxanes were prepared by inclusion complexation of SPPCL with alpha-cyclodextrin (alpha-CD) and thoroughly characterized by means of FT-IR, 1H NMR, 13C CP/MAS NMR, DSC, TGA, and WAXD. The results demonstrated that the porphyrin-cored polypseudorotaxanes formed through alpha-CD molecules threading onto the branch chains of star-shaped SPPCL polymers, and they had a channel-type crystalline structure. Meanwhile, the original crystallization of SPPCL polymers within the polypseudorotaxanes was completely suppressed in the alpha-CD cavities. Moreover, inclusion complexation between SPPCL and alpha-CD enhanced the thermal stability of both the guest SPPCL polymers and the host alpha-CD. Furthermore, both the SPPCL polymers and the polypseudorotaxanes showed similar fluorescent and UV-vis spectra compared with porphyrin core initiator. Consequently, this will not only provide potentially porphyrin-cored poly(epsilon-caprolactone) and its polypseudorotaxanes for photodynamic therapy but also improve the compatibility between poly(epsilon-caprolactone) and peptide drugs for drug delivery.

Magnetic Resonance Spectroscopy↗
PubMed2006

In situ encapsulation of horseradish peroxidase in electrospun porous silica fibers for potential biosensor applications.

Nanoporous silica nanofibers have been employed as a matrix to encapsulate horseradish peroxide enzymes via a simple electrospinning method. A viscous solution of prehydrolyzed tetramethyl orthosilicate, beta-d-glucose, poly(vinyl alcohol), and enzymes were employed as spinning solution to generate porous fibers in the form of nonwoven mats. The silica fiber mats thus produced have a high surface area because of the small diameter (100 to 200 nm) of the fibers as well as the extreme porosity (2 to 4 nm) of individual fibers caused by the glucose template present in them. The high surface area, mechanical flexibility, thermal stability, reusability, and freedom of encapsulating various enzymes make porous silica nanofibers excellent biosensors.

Biosensing Techniques↗
PubMed2006

Polyaniline, an electroactive polymer, supports adhesion and proliferation of cardiac myoblasts.

Conductive polymers, such as polypyrrole, have recently been studied as potential surfaces/matrices for cell- and tissue-culture applications. We have investigated the adhesion and proliferation properties of H9c2 cardiac myoblasts on a conductive polyaniline substrate. Both the non-conductive emeraldine base (PANi) and its conductive salt (E-PANi) forms of polyaniline were found to be biocompatible, viz., allowing for cell attachment and proliferation and, in the case of E-PANi, maintaining electrical conductivity. By comparison to tissue-culture-treated polystyrene (TCP), the initial adhesion of H9c2 cells to both PANi and E-PANi was slightly reduced by 7% (P < 0.05, n = 18). By contrast, the overall rate of cell proliferation on the conductive surfaces, although initially decreased, was similar to control TCP surfaces. After 6 days in culture on the different surfaces, the cells formed confluent monolayers which were morphologically indistinguishable. Furthermore, we observed that E-PANi, when maintained in an aqueous physiologic environment, retained a significant level of electrical conductivity for at least 100 h, even though this conductivity gradually decreased by about 3 orders of magnitude over time. These results demonstrate the potential for using polyaniline as an electroactive polymer in the culture of excitable cells and open the possibility of using this material as an electroactive scaffold for cardiac and/or neuronal tissue engineering applications that require biocompatibility of conductive polymers.

Actin Cytoskeleton↗
PubMed2005

Electrospinning polyaniline-contained gelatin nanofibers for tissue engineering applications.

Polyaniline (PANi), a conductive polymer, was blended with a natural protein, gelatin, and co-electrospun into nanofibers to investigate the potential application of such a blend as conductive scaffold for tissue engineering purposes. Electrospun PANi-contained gelatin fibers were characterized using scanning electron microscopy (SEM), electrical conductivity measurement, mechanical tensile testing, and differential scanning calorimetry (DSC). SEM analysis of the blend fibers containing less than 3% PANi in total weight, revealed uniform fibers with no evidence for phase segregation, as also confirmed by DSC. Our data indicate that with increasing the amount of PANi (from 0 to approximately 5%w/w), the average fiber size was reduced from 803+/-121 nm to 61+/-13 nm (p<0.01) and the tensile modulus increased from 499+/-207 MPa to 1384+/-105 MPa (p<0.05). The results of the DSC study further strengthen our notion that the doping of gelatin with a few % PANi leads to an alteration of the physicochemical properties of gelatin. To test the usefulness of PANi-gelatin blends as a fibrous matrix for supporting cell growth, H9c2 rat cardiac myoblast cells were cultured on fiber-coated glass cover slips. Cell cultures were evaluated in terms of cell proliferation and morphology. Our results indicate that all PANi-gelatin blend fibers supported H9c2 cell attachment and proliferation to a similar degree as the control tissue culture-treated plastic (TCP) and smooth glass substrates. Depending on the concentrations of PANi, the cells initially displayed different morphologies on the fibrous substrates, but after 1 week all cultures reached confluence of similar densities and morphology. Taken together these results suggest that PANi-gelatin blend nanofibers might provide a novel conductive material well suited as biocompatible scaffolds for tissue engineering.

Aniline Compounds↗
PubMed2004

Fluorescence and aggregation behavior of poly(amidoamine) dendrimers peripherally modified with aromatic chromophores: the effect of dendritic architectures.

PAMAM dendrimers of the zeroth to fifth generation (G0-5) have been peripherally modified with phenyl, naphthyl, pyrenyl, and dansyl chromophores. Their fluorescence behaviors are strongly affected by the dendritic architectures at different generations. These dendrimers modified with hydrophobic chromphores can self-organize into vesicular aggregates at the low generations G0-3 in water. The size and aggregation number of these vesicles decrease with increasing generation from G0 to G3. Critical aggregation concentration determined by fluorescence spectroscopy reveals that these aggregates can be favorably formed in the order of G3 > G2 > G1. In contrast to the vesicles made from traditional amphiphilic compounds, these dendrimer-based vesicles are very adhesive due to the H-bonding interaction and entanglement of dendritic branches located in the outer layer. A large number of multivesicle assemblies, i.e., "twins" and "quins" consisting of two and five vesicles, were clearly identifiable with transmission electron (TEM) and atomic force microscopy. For the dendrimers with peripheral pyrenyl chromophores, triangle-like vesicles were observed in water. The hydrophobic interphase thickness of the vesicular bilayer is ca. 2.0-3.2 nm determined by fluorescence resonance energy transfer methods, which agrees well with the thickness directly observed with TEM.

Journal Article↗
PubMed2004

Highly effective sulfated zirconia nanocatalysts grown out of colloidal silica at high temperature.

A large surface-to-volume ratio is a prerequisite for highly effective catalysts. Making catalysts in the form of nanoparticles provides a good way to achieve the aim. However, agglomeration of nanoparticles during the preparation and utilization of nanocatalysts remains a formidable problem. Here, we present a novel approach in which nano units of catalysts are formed in the matrix of a colloidal carrier, with assistance of a cross-linking agent, and then grow out of the carrier upon calcination at high temperature. This ensures that the catalysts not only do not agglomerate, but also have a low cost and high catalytic efficiency due to the large surface-to-volume ratio and the absence of carbon deposition. The technique is demonstrated by the successful preparation of a binary nanocatalyst that consists of a silica nanoparticle core and a sulfated zirconia (SZ) nanocrystal shell (JML-1). The synthesis was achieved by converting sulfated zirconia (SZ) and silica solutions into a composite gel by means of sol-gel processing in the presence of triethoxysilane as the cross-linking agent, followed by heating at 50 degrees C and calcining at 550 degrees C. Relative to other catalysts, such as pure SZ, non-nanodispersed SZ over silica (SZ/SiO2), and zeolites Y, Beta, and ZSM-5, JML-1 exhibits superior catalytic activity in many reactions. For example, the activity of JML-1 in the production of gasoline by alkylation of 1-butene with isobutene remained at 95% or higher after 20 h of reaction and was over 90% after being regenerated five times. In sharp contrast, SZ and SZ/SiO2 give a high activity only for 2 h and the initial activity of zeolites Beta and ZSM-5 are about 88 and 60%, respectively. These findings demonstrate that non-agglomerated nanoparticles anchored onto a carrier surface can be prepared and the technique provides a versatile route to new highly effective nanocatalyst systems.

Journal Article↗
PubMed2004

Preparation and characterization of polyaniline microwires containing CdS nanoparticles.

Polyaniline(PANI) microwires containing CdS nanoparticles have been prepared by introducing hydrogen bonding and/or electrostatic interaction between mercaptocarboxylic acid capped CdS nanoparticles and PANI. SEM and TEM proved them to be wire-like structures. PL spectra of the PANI/CdS complex is blue-shifted by 14 nm compared to CdS nanoparticles in N-methylpyrrolidinone(NMP).

Journal Article↗
PubMedDate not supplied

Studies of effects of macromolecular crowding and confinement on protein folding and protein stability.

In cells, proteins execute specific tasks in crowded environments; these environments influence their stability and dynamics. Similarly, for an enzyme molecule encapsulated in an inorganic cavity as in biosensors or biocatalysts, confinement or excluded volume plays an important role in its stability and dynamics. In this article we present results of our experimental and theoretical investigations of the confinement and macromolecular crowding effects on protein. On the experimental side we study the stability of encapsulated cytochrome c against unfolding induced by the presence of denaturants, such as urea. Results show that, as the pore size in which protein is trapped is reduced, protein shows higher stability against denaturant-induced unfolding. On the theoretical side, after reviewing our previous study of the confinement effects on the equilibrium and dynamic properties of protein using a minimalist (two-dimensional lattice, Monte Carlo, Brownian dynamics) model, we have extended the model so that the effects of macromolecular crowding on such properties can be studied. Our simulations show that both folding and unfolding times increase with the number of crowders in solution, however, the equilibrium constant is affected such that the equilibrium is shifted towards the folded state. Furthermore, our results show that, for a fixed number of crowders as the size of crowder (or excluded volume) increases, the average size of protein at equilibrium decreases.

Animals↗