Biomedical subjects

Yi-You Huang

Publications and source records attributed to Yi-You Huang.

9 recordsLinked to original sources

PubMed2007

Microcontact printing of laminin on oxygen plasma activated substrates for the alignment and growth of Schwann cells.

Microenvironment mimicking biological situation is a vital issue in tissue regeneration. With much progress being made, one of the major challenges remains to develop a convenient method to fabricate the scaffold microenvironment suitable for cell attachment and proliferation. This article demonstrates the efficacy of microcontact printed laminin, an extracellular matrix protein, on three different oxygen plasma treatment substrates-tissue culture polystyrene, poly(methyl methacrylate) films, and chitosan films-for alignment and growth of the Schwann cells in in vitro culturing. Replica molding of polydimethylsiloxane elastomeric stamps, fabricated from patterned SU-8 structure on silicon master, was used to print laminin on the three substrates. Pattern and growth of Schwann cells for low (10(3) cells/cm(2)) and increased cell density (2 x 10(4) cells/cm(2)) on the varied substrates with and without microcontact printed laminin were characterized. Results of in vitro cell culture of Schwann cells showed a high degree of cell orientation on the laminin-micropatterned substrates for both cell densities. However, different cell seeding densities will strongly impact the morphology and orientation of Schwann cells. Microcontact printing proves to be a convenient means to pattern cell-recognition molecules on scaffold for cell-guilded growth in tissue regeneration.

Animals↗

PubMed2006

A protein detection technique by using surface plasmon resonance (SPR) with rolling circle amplification (RCA) and nanogold-modified tags.

Surface plasmon resonance (SPR) can detect molecules bound to a surface by subtle changes in the SPR angle. By immobilizing probes onto the surface and passing analyte solution through the surface, changes in SPR angle indicate the binding between analyte and probes. Detection of analyte from solution can be achieved easily. By using rolling circle amplification (RCA) and nanogold-modified tags, the signals of analyte binding are greatly amplified, and the sensitivity of this technique is significantly improved. Furthermore, this technique has potentials for ultra-sensitive detection and microarray analysis. In this paper, this detection technique is introduced and shown to have great amplification capability. Using 5 nm nanogold with 30 min of RCA development time, this proposed protein detection technique shows over 60 times amplification of the original signal.

Gold↗

PubMed2006

Pulmonary delivery of insulin by liposomal carriers.

Growing attention has been given to the potential of a pulmonary route as a non-invasive administration for systemic delivery of therapeutic agents (mainly peptides and proteins). The lungs provide a large absorptive surface area, extremely thin absorptive mucosal membrane, and good blood supply. The non-invasive nature of this pathway makes it especially valuable for the delivery of large molecular protein. However, pulmonary delivery of peptides and proteins is complicated by the complexity of the anatomic structure of the human respiratory system and the effect of disposition exerted by the respiration process. In this study, novel nebulizer-compatible liposomal carrier for aerosol pulmonary drug delivery of insulin was developed and characterized. Experimental results showed that insulin could be efficiently encapsulated into liposomes by preformed vesicles and detergent dialyzing method. The optimal encapsulation efficiency was achieved when 40% ethanol was used. The particle size of liposomal aerosols from ultrasonic nebulizer approximated to 1 mum. Insulin was stable in the liposomal solution. Animal studies showed that plasma glucose level was effectively reduced when liposomal insulin was delivered by inhalation route of using aerosolized insulin-encapsulated liposomes. Including fluorescent probe (phosphatidylethanolamine-rhodamine) into liposome, we found that the liposomal carriers were effectively and homogeneously distributed in the lung aveolar. Liposome-mediated pulmonary drug delivery promotes an increase in drug retention-time in the lungs, and more importantly, a reduction in extrapulmonary side-effects which invariably results in enhanced therapeutic efficacies.

Administration, Inhalation↗

PubMed2006

Poly (epsilon-caprolactone) grafted with nano-structured chitosan enhances growth of human dermal fibroblasts.

Polyester films are modified with their bioactivity for tissue engineering by grafting a nano-structured bioactive material, nano-structured chitosan (nano-CS), on a model polymer, poly (epsilon-caprolactone) (PCL). The nano-CS was duplicated using a solvent-etched PCL mold and then grafted onto PCL using a selected solvent. The structure of the nano-CS/PCL surface was characterized using an atomic force microscope to observe the topography and determine the roughness. The centerline average roughness, Ra, of the surface of the nano-CS/PCL film is 106.0+/-4.0 nm whereas that of the surface of the CS-grafted PCL film (CS/PCL) is 3.6+/-0.4 nm. The latter is therefore very smooth. CS is known to swell following hydration, so the Ra values were determined again after immersion for 12 h in phosphate buffered saline. Although the centerline average roughness of the nano-CS/PCL was lower, it still markedly exceeded that of the CS/PCL film. Cells grown on nano-CS/PCL, CS/PCL, nano-structured PCL (nano-PCL), and PCL films were observed by fluorescent staining and analyzed by MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide) viability assay following 3 and 7 days of culture, to evaluate the effects of the design on the growth of fibroblasts. The viability assay of the cells reveals that the growth rate of cells on both CS/PCL and nano-CS/PCL films significantly exceeds (P<0.001) those of PCL and nano-PCL films on both cultural days. Additionally, the growth rate and proliferation of fibroblasts on nano-CS/PCL films significantly exceed (P<0.001) those on CS/PCL films after both periods of culturing, suggesting that the bioactive surface following a nano-structured treatment promotes the growth rate of cells. However, nano-PCL films do not have the same effects as nano-CS/PCL films do. In conclusion, a novel biomaterial, nano-CS/PCL, is developed by grafting a nano-structured bioactive surface, CS, onto the PCL surface to promote the the growth rate of fibroblasts. This work elucidates a new concept for designing films or scaffolds for tissue engineering-the grafting of nano-structured bioactive biomaterials to the films or scaffolds to promote the growth of cells.

Caproates↗

PubMed2006

Biomaterials and strategies for nerve regeneration.

Nerve regeneration is a complex biological phenomenon. Once the nervous system is impaired, its recovery is difficult and malfunctions in other parts of the body may occur because mature neurons do not undergo cell division. To increase the prospects of axonal regeneration and functional recovery, researches have focused on designing "nerve guidance channels" or "nerve conduits." When developing ideal tissue-engineered nerve conduits, several components come to mind. They include a biodegradable and porous channel wall, the ability to deliver bioactive growth factors, incorporation of support cells, an internal oriented matrix to support cell migration, intraluminal channels to mimic the structure of nerve fascicles, and electrical activities. This article reviews the factors that are critical for nerve repair, and the advanced technologies that are explored to fabricate nerve conduits. To more accurately mimic natural repair in the body, recent studies have focused on the use of various advanced approaches to create ideal nerve conduits that combine multiple stimuli in an effort to better mimic the complex signals normally found in the body.

Animals↗

PubMed2005

Repair of porcine articular cartilage defect with autologous chondrocyte transplantation.

Articular cartilage is known to have poor healing capacity after injury. Autologous chondral grafting remains the mainstay to treat well-defined, full-thickness, symptomatic cartilage defects. We demonstrated the utilization of gelatin microbeads to deliver autologous chondrocytes for in vivo cartilage generation. Chondrocytes were harvested from the left forelimbs of 12 Lee-Sung pigs. The cells were expanded in monolayer culture and then seeded onto gelatin microbeads or left in monolayer. Shortly before implantation, the cell-laden beads were mixed with collagen type I gel, while the cells in monolayer culture were collected and re-suspended in culture medium. Full-thickness cartilage defects were surgically created in the weight-bearing surface of the femoral condyles of both knees, covered by periosteal patches taken from proximal tibia, and sealed with a porcine fibrin glue. In total, 48 condyles were equally allotted to experimental, control, and null groups that were filled beneath the patch with chondrocyte-laden beads in gel, chondrocytes in plain medium solution, or nothing, respectively. The repair was examined 6 months post-surgery on the basis of macroscopic appearance, histological scores based on the International Cartilage Repair Society Scale, and the proportion of characteristic chondrocytes. Tensile stress-relaxation behavior was determined from uniaxial indentation tests. The experimental group scored higher than the control group in the categories of matrix nature, cell distribution pattern, and absence of mineralization, with similar surface smoothness. Both the experimental and control groups were superior to the null group in the above-mentioned categories. Viable cell populations were equal in all groups, but the proportion of characteristic chondrocytes was highest in the experimental group. Matrix stiffness was ranked as null > native cartilage > control > experimental group. Transplanted autologous chondrocytes survive and could yield hyaline-like cartilage. The application of beads and gel for transplantation helped to retain the transferred cells in situ and maintain a better chondrocyte phenotype.

Animals↗

PubMed2005

Manufacture of porous polymer nerve conduits through a lyophilizing and wire-heating process.

We have developed a method for nerve tissue regeneration using longitudinally oriented channels within biodegradable polymers created by a combined lyophilizing and wire-heating process. This type of cell-adhesive scaffold provides increased area to support and guide extending axons subsequent to nerve injury. Utilizing Ni-Cr wires as mandrels to create channels in scaffold increased safety, effectiveness, and reproducibility. The scaffolds tested were made from different biodegradable polymers, chitosan and poly(D,L-lactide-co-glycolide) (PLGA), because of their availability, ease of processing, low inflammatory response, and approval by the FDA. According to our experimental results, the high permeability and the characteristic porous structure of chitosan proved to be a better material for nerve guidance than PLGA. The scanning electron micrographs revealed that the scaffolds were consistent along the longitudinal axis with channels being distributed evenly throughout the scaffolds. There was no evidence to suggest merging or splitting of individual channels. The diameter of the channels was about 100 mum, similar to the 115 micromameter of the Ni-Cr wire. Regulating the size and quantity of the Ni-Cr wires allow us to control the number and the diameter of the channels. Furthermore, the neutralizing processes significantly influenced the porous structure of chitosan scaffolds. Using weak base (NaHCO(3) 1M) to neutralize chitosan scaffolds made the porous structure more uniform. The innovative method of using Ni-Cr wires as mandrels could be easily tailored to other polymer and solvent systems. The high permeability and the characteristic porous structure of chitosan made it a superior material for nerve tissue engineering. These scaffolds could be useful for guiding regeneration of the peripheral nerve or spinal cord after a transection injury.

Absorbable Implants↗

PubMed2004

RCA combined nanoparticle-based optical detection technique for protein microarray: a novel approach.

Developing a readily available biosensor with excellent performances is the main focus of many research groups. Recently, major breakthroughs in miniaturization of molecular analysis have produced DNA and protein microarrays. The aim of our group is to develop a sensitive technique for analyzing signals on protein microarray by applying the surface plasmon resonance (SPR) method. This new detection technique for specific molecular binding utilizes rolling circles amplification (RCA) post-signal processing method [Nat. Genet. 19 (1998) 225-232] and optical visualization by nanogold particle-labeled molecules on a micro-structured chip surface. By covalent bonding of the RCA primer to the detection antibody guarantees that the linkage between the analyte and the amplified RCA product is maintained during the assay. Experimental results show that RCA has significantly enhanced sensitivity compared to conventional methods. This combination of an easily detectable signal with chip technology should have the potential to become a successful commercial application.

DNA, Circular↗

PubMed2003

Encapsulating protein into preformed liposomes by ethanol-destabilized method.

This study describes a highly efficient method for encapsulating protein drugs into liposomes without using toxic solvents such as chloroform. Large unilamellar vesicles (LUVs) were formed by the ethanol injection method. The effects of composition of phospholipid, buffer concentration, incubation time, incubation temperature, drug loading, ethanol content, and the presence of poly(ethylene) glycol (PEG) lipids on the entrapment efficiency of protein were investigated. It was shown that these preformed LUVs could be induced to entrap protein drugs in the presence of ethanol. Protein could be efficiently encapsulated into liposomes. The interaction of the liposomes with proteins leads to the formation of multilamellar liposomes ranging in size from 70 to 120 nm, only slightly bigger than the parent LUVs from which they originated. Protein drugs were stable in the liposomal solution. There is no significant activity loss during the encapsulation process. The optimal encapsulation efficiency was achieved when 30% approximately 40% ethanol was used in encapsulating protein drugs. Due to the steric hindrance, LUVs containing a PEG coating will dramatically reduce the encapsulation efficiency, even in liposomes containing very low amount of PEG.

Buffers↗